Commit 90c02d72 authored by Bruno Randolf's avatar Bruno Randolf Committed by John W. Linville

ath5k: Use mac80211 channel mapping function

Use mac80211 channel mapping function instead of own homegrown version.
Signed-off-by: default avatarBruno Randolf <br1@einfach.org>
Acked-by: default avatarBob Copeland <me@bobcopeland.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 7755bad9
......@@ -241,18 +241,6 @@ static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *re
* Channel/mode setup *
\********************/
/*
* Convert IEEE channel number to MHz frequency.
*/
static inline short
ath5k_ieee2mhz(short chan)
{
if (chan <= 14 || chan >= 27)
return ieee80211chan2mhz(chan);
else
return 2212 + chan * 20;
}
/*
* Returns true for the channel numbers used without all_channels modparam.
*/
......@@ -274,6 +262,7 @@ ath5k_copy_channels(struct ath5k_hw *ah,
unsigned int max)
{
unsigned int i, count, size, chfreq, freq, ch;
enum ieee80211_band band;
if (!test_bit(mode, ah->ah_modes))
return 0;
......@@ -283,11 +272,13 @@ ath5k_copy_channels(struct ath5k_hw *ah,
/* 1..220, but 2GHz frequencies are filtered by check_channel */
size = 220 ;
chfreq = CHANNEL_5GHZ;
band = IEEE80211_BAND_5GHZ;
break;
case AR5K_MODE_11B:
case AR5K_MODE_11G:
size = 26;
chfreq = CHANNEL_2GHZ;
band = IEEE80211_BAND_2GHZ;
break;
default:
ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
......@@ -296,7 +287,10 @@ ath5k_copy_channels(struct ath5k_hw *ah,
for (i = 0, count = 0; i < size && max > 0; i++) {
ch = i + 1 ;
freq = ath5k_ieee2mhz(ch);
freq = ieee80211_channel_to_frequency(ch, band);
if (freq == 0) /* mapping failed - not a standard channel */
continue;
/* Check if channel is supported by the chipset */
if (!ath5k_channel_ok(ah, freq, chfreq))
......@@ -307,8 +301,7 @@ ath5k_copy_channels(struct ath5k_hw *ah,
/* Write channel info and increment counter */
channels[count].center_freq = freq;
channels[count].band = (chfreq == CHANNEL_2GHZ) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
channels[count].band = band;
switch (mode) {
case AR5K_MODE_11A:
case AR5K_MODE_11G:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment