Commit 91691295 authored by Seth Forshee's avatar Seth Forshee Committed by John W. Linville

brcm80211: smac: always set channel specified by mac80211

In some situations brcmsmac is choosing a channel internally. This makes
it difficult at times to know what channel to use for enforcing
regulatory constraints, so instead always use the channel from the
mac80211 configuration.
Reviewed-by: default avatarArend Van Spriel <arend@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarSeth Forshee <seth.forshee@canonical.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 0bd8b79f
......@@ -3139,20 +3139,6 @@ void brcms_c_reset(struct brcms_c_info *wlc)
brcms_b_reset(wlc->hw);
}
/* Return the channel the driver should initialize during brcms_c_init.
* the channel may have to be changed from the currently configured channel
* if other configurations are in conflict (bandlocked, 11n mode disabled,
* invalid channel for current country, etc.)
*/
static u16 brcms_c_init_chanspec(struct brcms_c_info *wlc)
{
u16 chanspec =
1 | WL_CHANSPEC_BW_20 | WL_CHANSPEC_CTL_SB_NONE |
WL_CHANSPEC_BAND_2G;
return chanspec;
}
void brcms_c_init_scb(struct scb *scb)
{
int i;
......@@ -5129,6 +5115,8 @@ static void brcms_c_wme_retries_write(struct brcms_c_info *wlc)
/* make interface operational */
int brcms_c_up(struct brcms_c_info *wlc)
{
struct ieee80211_channel *ch;
BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
/* HW is turned off so don't try to access it */
......@@ -5195,8 +5183,9 @@ int brcms_c_up(struct brcms_c_info *wlc)
wlc->pub->up = true;
if (wlc->bandinit_pending) {
ch = wlc->pub->ieee_hw->conf.channel;
brcms_c_suspend_mac_and_wait(wlc);
brcms_c_set_chanspec(wlc, wlc->default_bss->chanspec);
brcms_c_set_chanspec(wlc, ch20mhz_chspec(ch->hw_value));
wlc->bandinit_pending = false;
brcms_c_enable_mac(wlc);
}
......@@ -8201,19 +8190,12 @@ bool brcms_c_dpc(struct brcms_c_info *wlc, bool bounded)
void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx)
{
struct bcma_device *core = wlc->hw->d11core;
struct ieee80211_channel *ch = wlc->pub->ieee_hw->conf.channel;
u16 chanspec;
BCMMSG(wlc->wiphy, "wl%d\n", wlc->pub->unit);
/*
* This will happen if a big-hammer was executed. In
* that case, we want to go back to the channel that
* we were on and not new channel
*/
if (wlc->pub->associated)
chanspec = wlc->home_chanspec;
else
chanspec = brcms_c_init_chanspec(wlc);
chanspec = ch20mhz_chspec(ch->hw_value);
brcms_b_init(wlc->hw, chanspec);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment