Skip to content

L
linux
Commit 91a6c462 authored by H. Peter Anvin's avatar H. Peter Anvin Committed by Linus Torvalds
Browse files
Options

Use the new x86 setup code for x86-64; unify with i386 

This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.
Signed-off-by: default avatarH. Peter Anvin <hpa@zytor.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 4fd06960
Hide whitespace changes
Inline Side-by-side
Showing with 10 additions and 1263 deletions
arch/x86_64/boot/Makefile
View file @ 91a6c462
#
# arch/x86_64/boot/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
ROOT_DEV := CURRENT
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
# If you want the RAM disk device, define this to be the size in blocks.
#RAMDISK := -DRAMDISK=512
targets := vmlinux.bin bootsect bootsect.o \
setup setup.o bzImage mtools.conf
EXTRA_CFLAGS := -m32
hostprogs-y := tools/build
HOST_EXTRACFLAGS += $(LINUXINCLUDE)
subdir- := compressed/ #Let make clean descend in compressed/
# ---------------------------------------------------------------------------
$(obj)/bzImage: IMAGE_OFFSET := 0x100000
$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
$(obj)/setup $(obj)/bootsect: %: %.o FORCE
$(call if_changed,ld)
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
FDINITRD =
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
$(obj)/mtools.conf: $(src)/mtools.conf.in
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
# This requires write access to /dev/fd0
zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
syslinux /dev/fd0 ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
# These require being root or having syslinux 2.02 or higher installed
fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
isoimage: $(BOOTIMAGE)
-rm -rf $(obj)/isoimage
mkdir $(obj)/isoimage
for i in lib lib64 share end ; do \
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
break ; \
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
done
cp $(BOOTIMAGE) $(obj)/isoimage/linux
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
fi
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
cp System.map $(INSTALL_PATH)/
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
# The actual boot code is shared with i386 including the Makefile.
# So tell kbuild that we fetch the code from i386 and include the
# Makefile from i386 too.
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
src := arch/i386/boot
include $(src)/Makefile
arch/x86_64/boot/bootsect.S deleted 100644 → 0
View file @ 4fd06960
/*
* bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
*
* modified by Drew Eckhardt
* modified by Bruce Evans (bde)
* modified by Chris Noe (May 1999) (as86 -> gas)
* gutted by H. Peter Anvin (Jan 2003)
*
* BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
* addresses must be multiplied by 16 to obtain their respective linear
* addresses. To avoid confusion, linear addresses are written using leading
* hex while segment addresses are written as segment:offset.
*
*/
#include <asm/boot.h>
SETUPSECTS = 4 /* default nr of setup-sectors */
BOOTSEG = 0x07C0 /* original address of boot-sector */
INITSEG = DEF_INITSEG /* we move boot here - out of the way */
SETUPSEG = DEF_SETUPSEG /* setup starts here */
SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
/* to be loaded */
ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
#ifndef SVGA_MODE
#define SVGA_MODE ASK_VGA
#endif
#ifndef RAMDISK
#define RAMDISK 0
#endif
#ifndef ROOT_RDONLY
#define ROOT_RDONLY 1
#endif
.code16
.text
.global _start
_start:
# Normalize the start address
jmpl $BOOTSEG, $start2
start2:
movw %cs, %ax
movw %ax, %ds
movw %ax, %es
movw %ax, %ss
movw $0x7c00, %sp
sti
cld
movw $bugger_off_msg, %si
msg_loop:
lodsb
andb %al, %al
jz die
movb $0xe, %ah
movw $7, %bx
int $0x10
jmp msg_loop
die:
# Allow the user to press a key, then reboot
xorw %ax, %ax
int $0x16
int $0x19
# int 0x19 should never return. In case it does anyway,
# invoke the BIOS reset code...
ljmp $0xf000,$0xfff0
bugger_off_msg:
.ascii "Direct booting from floppy is no longer supported.\r\n"
.ascii "Please use a boot loader program instead.\r\n"
.ascii "\n"
.ascii "Remove disk and press any key to reboot . . .\r\n"
.byte 0
# Kernel attributes; used by setup
.org 497
setup_sects: .byte SETUPSECTS
root_flags: .word ROOT_RDONLY
syssize: .word SYSSIZE
swap_dev: .word SWAP_DEV
ram_size: .word RAMDISK
vid_mode: .word SVGA_MODE
root_dev: .word ROOT_DEV
boot_flag: .word 0xAA55
arch/x86_64/boot/compressed/Makefile
View file @ 91a6c462
......@@ -7,11 +7,12 @@
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
EXTRA_AFLAGS := -traditional
# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
# -m32
CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
-fno-strict-aliasing -fPIC -mcmodel=small \
$(call cc-option, -ffreestanding) \
$(call cc-option, -fno-stack-protector)
AFLAGS := $(CFLAGS) -D__ASSEMBLY__
LDFLAGS := -m elf_x86_64
LDFLAGS_vmlinux := -T
......
arch/x86_64/boot/install.sh deleted 100644 → 0
View file @ 4fd06960
#!/bin/sh
. $srctree/arch/i386/boot/install.sh
arch/x86_64/boot/mtools.conf.in deleted 100644 → 0
View file @ 4fd06960
#
# mtools configuration file for "make (b)zdisk"
#
# Actual floppy drive
drive a:
file="/dev/fd0"
# 1.44 MB floppy disk image
drive v:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
# 2.88 MB floppy disk image (mostly for virtual uses)
drive w:
file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
arch/x86_64/boot/setup.S deleted 100644 → 0
View file @ 4fd06960
/*
* setup.S Copyright (C) 1991, 1992 Linus Torvalds
*
* setup.s is responsible for getting the system data from the BIOS,
* and putting them into the appropriate places in system memory.
* both setup.s and system has been loaded by the bootblock.
*
* This code asks the bios for memory/disk/other parameters, and
* puts them in a "safe" place: 0x90000-0x901FF, ie where the
* boot-block used to be. It is then up to the protected mode
* system to read them from there before the area is overwritten
* for buffer-blocks.
*
* Move PS/2 aux init code to psaux.c
* (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
*
* some changes and additional features by Christoph Niemann,
* March 1993/June 1994 (Christoph.Niemann@linux.org)
*
* add APM BIOS checking by Stephen Rothwell, May 1994
* (sfr@canb.auug.org.au)
*
* High load stuff, initrd support and position independency
* by Hans Lermen & Werner Almesberger, February 1996
* <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
*
* Video handling moved to video.S by Martin Mares, March 1996
* <mj@k332.feld.cvut.cz>
*
* Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
* parsons) to avoid loadlin confusion, July 1997
*
* Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
* <stiker@northlink.com>
*
* Fix to work around buggy BIOSes which don't use carry bit correctly
* and/or report extended memory in CX/DX for e801h memory size detection
* call. As a result the kernel got wrong figures. The int15/e801h docs
* from Ralf Brown interrupt list seem to indicate AX/BX should be used
* anyway. So to avoid breaking many machines (presumably there was a reason
* to orginally use CX/DX instead of AX/BX), we do a kludge to see
* if CX/DX have been changed in the e801 call and if so use AX/BX .
* Michael Miller, April 2001 <michaelm@mjmm.org>
*
* Added long mode checking and SSE force. March 2003, Andi Kleen.
*/
#include <asm/segment.h>
#include <linux/utsrelease.h>
#include <linux/compile.h>
#include <asm/boot.h>
#include <asm/e820.h>
#include <asm/page.h>
#include <asm/setup.h>
/* Signature words to ensure LILO loaded us right */
#define SIG1 0xAA55
#define SIG2 0x5A5A
INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
# ... and the former contents of CS
DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
.code16
.globl begtext, begdata, begbss, endtext, enddata, endbss
.text
begtext:
.data
begdata:
.bss
begbss:
.text
start:
jmp trampoline
# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
.ascii "HdrS" # header signature
.word 0x0206 # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
start_sys_seg: .word SYSSEG
.word kernel_version # pointing to kernel version string
# above section of header is compatible
# with loadlin-1.5 (header v1.5). Don't
# change it.
type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
# Bootlin, SYSLX, bootsect...)
# See Documentation/i386/boot.txt for
# assigned ids
# flags, unused bits must be zero (RFU) bit within loadflags
loadflags:
LOADED_HIGH = 1 # If set, the kernel is loaded high
CAN_USE_HEAP = 0x80 # If set, the loader also has set
# heap_end_ptr to tell how much
# space behind setup.S can be used for
# heap purposes.
# Only the loader knows what is free
#ifndef __BIG_KERNEL__
.byte 0
#else
.byte LOADED_HIGH
#endif
setup_move_size: .word 0x8000 # size to move, when setup is not
# loaded at 0x90000. We will move setup
# to 0x90000 then just before jumping
# into the kernel. However, only the
# loader knows how much data behind
# us also needs to be loaded.
code32_start: # here loaders can put a different
# start address for 32-bit code.
#ifndef __BIG_KERNEL__
.long 0x1000 # 0x1000 = default for zImage
#else
.long 0x100000 # 0x100000 = default for big kernel
#endif
ramdisk_image: .long 0 # address of loaded ramdisk image
# Here the loader puts the 32-bit
# address where it loaded the image.
# This only will be read by the kernel.
ramdisk_size: .long 0 # its size in bytes
bootsect_kludge:
.long 0 # obsolete
heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
# space from here (exclusive) down to
# end of setup code can be used by setup
# for local heap purposes.
pad1: .word 0
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
# The command line should be
# located between the start of
# setup and the end of low
# memory (0xa0000), or it may
# get overwritten before it
# gets read. If this field is
# used, there is no longer
# anything magical about the
# 0x90000 segment; the setup
# can be located anywhere in
# low memory 0x10000 or higher.
ramdisk_max: .long 0xffffffff
kernel_alignment: .long 0x200000 # physical addr alignment required for
# protected mode relocatable kernel
#ifdef CONFIG_RELOCATABLE
relocatable_kernel: .byte 1
#else
relocatable_kernel: .byte 0
#endif
pad2: .byte 0
pad3: .word 0
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
#added with boot protocol
#version 2.06
trampoline: call start_of_setup
.align 16
# The offset at this point is 0x240
.space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
# End of setup header #####################################################
start_of_setup:
# Bootlin depends on this being done early
movw $0x01500, %ax
movb $0x81, %dl
int $0x13
#ifdef SAFE_RESET_DISK_CONTROLLER
# Reset the disk controller.
movw $0x0000, %ax
movb $0x80, %dl
int $0x13
#endif
# Set %ds = %cs, we know that SETUPSEG = %cs at this point
movw %cs, %ax # aka SETUPSEG
movw %ax, %ds
# Check signature at end of setup
cmpw $SIG1, setup_sig1
jne bad_sig
cmpw $SIG2, setup_sig2
jne bad_sig
jmp good_sig1
# Routine to print asciiz string at ds:si
prtstr:
lodsb
andb %al, %al
jz fin
call prtchr
jmp prtstr
fin: ret
# Space printing
prtsp2: call prtspc # Print double space
prtspc: movb $0x20, %al # Print single space (note: fall-thru)
prtchr:
pushw %ax
pushw %cx
movw $0007,%bx
movw $0x01, %cx
movb $0x0e, %ah
int $0x10
popw %cx
popw %ax
ret
beep: movb $0x07, %al
jmp prtchr
no_sig_mess: .string "No setup signature found ..."
good_sig1:
jmp good_sig
# We now have to find the rest of the setup code/data
bad_sig:
movw %cs, %ax # SETUPSEG
subw $DELTA_INITSEG, %ax # INITSEG
movw %ax, %ds
xorb %bh, %bh
movb (497), %bl # get setup sect from bootsect
subw $4, %bx # LILO loads 4 sectors of setup
shlw $8, %bx # convert to words (1sect=2^8 words)
movw %bx, %cx
shrw $3, %bx # convert to segment
addw $SYSSEG, %bx
movw %bx, %cs:start_sys_seg
# Move rest of setup code/data to here
movw $2048, %di # four sectors loaded by LILO
subw %si, %si
movw %cs, %ax # aka SETUPSEG
movw %ax, %es
movw $SYSSEG, %ax
movw %ax, %ds
rep
movsw
movw %cs, %ax # aka SETUPSEG
movw %ax, %ds
cmpw $SIG1, setup_sig1
jne no_sig
cmpw $SIG2, setup_sig2
jne no_sig
jmp good_sig
no_sig:
lea no_sig_mess, %si
call prtstr
no_sig_loop:
jmp no_sig_loop
good_sig:
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ax, %ds
# Check if an old loader tries to load a big-kernel
testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
jz loader_ok # No, no danger for old loaders.
cmpb $0, %cs:type_of_loader # Do we have a loader that
# can deal with us?
jnz loader_ok # Yes, continue.
pushw %cs # No, we have an old loader,
popw %ds # die.
lea loader_panic_mess, %si
call prtstr
jmp no_sig_loop
loader_panic_mess: .string "Wrong loader, giving up..."
loader_ok:
/* check for long mode. */
/* we have to do this before the VESA setup, otherwise the user
can't see the error message. */
pushw %ds
movw %cs,%ax
movw %ax,%ds
call verify_cpu
testl %eax,%eax
jz sse_ok
no_longmode:
call beep
lea long_mode_panic,%si
call prtstr
no_longmode_loop:
jmp no_longmode_loop
long_mode_panic:
.string "Your CPU does not support long mode. Use a 32bit distribution."
.byte 0
#include "../kernel/verify_cpu.S"
sse_ok:
popw %ds
# tell BIOS we want to go to long mode
movl $0xec00,%eax # declare target operating mode
movl $2,%ebx # long mode
int $0x15
# Get memory size (extended mem, kB)
xorl %eax, %eax
movl %eax, (0x1e0)
#ifndef STANDARD_MEMORY_BIOS_CALL
movb %al, (E820NR)
# Try three different memory detection schemes. First, try
# e820h, which lets us assemble a memory map, then try e801h,
# which returns a 32-bit memory size, and finally 88h, which
# returns 0-64m
# method E820H:
# the memory map from hell. e820h returns memory classified into
# a whole bunch of different types, and allows memory holes and
# everything. We scan through this memory map and build a list
# of the first 32 memory areas, which we return at [E820MAP].
# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
#define SMAP 0x534d4150
meme820:
xorl %ebx, %ebx # continuation counter
movw $E820MAP, %di # point into the whitelist
# so we can have the bios
# directly write into it.
jmpe820:
movl $0x0000e820, %eax # e820, upper word zeroed
movl $SMAP, %edx # ascii 'SMAP'
movl $20, %ecx # size of the e820rec
pushw %ds # data record.
popw %es
int $0x15 # make the call
jc bail820 # fall to e801 if it fails
cmpl $SMAP, %eax # check the return is `SMAP'
jne bail820 # fall to e801 if it fails
# cmpl $1, 16(%di) # is this usable memory?
# jne again820
# If this is usable memory, we save it by simply advancing %di by
# sizeof(e820rec).
#
good820:
movb (E820NR), %al # up to 128 entries
cmpb $E820MAX, %al
jae bail820
incb (E820NR)
movw %di, %ax
addw $20, %ax
movw %ax, %di
again820:
cmpl $0, %ebx # check to see if
jne jmpe820 # %ebx is set to EOF
bail820:
# method E801H:
# memory size is in 1k chunksizes, to avoid confusing loadlin.
# we store the 0xe801 memory size in a completely different place,
# because it will most likely be longer than 16 bits.
# (use 1e0 because that's what Larry Augustine uses in his
# alternative new memory detection scheme, and it's sensible
# to write everything into the same place.)
meme801:
stc # fix to work around buggy
xorw %cx,%cx # BIOSes which don't clear/set
xorw %dx,%dx # carry on pass/error of
# e801h memory size call
# or merely pass cx,dx though
# without changing them.
movw $0xe801, %ax
int $0x15
jc mem88
cmpw $0x0, %cx # Kludge to handle BIOSes
jne e801usecxdx # which report their extended
cmpw $0x0, %dx # memory in AX/BX rather than
jne e801usecxdx # CX/DX. The spec I have read
movw %ax, %cx # seems to indicate AX/BX
movw %bx, %dx # are more reasonable anyway...
e801usecxdx:
andl $0xffff, %edx # clear sign extend
shll $6, %edx # and go from 64k to 1k chunks
movl %edx, (0x1e0) # store extended memory size
andl $0xffff, %ecx # clear sign extend
addl %ecx, (0x1e0) # and add lower memory into
# total size.
# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
# 64mb, depending on the bios) in ax.
mem88:
#endif
movb $0x88, %ah
int $0x15
movw %ax, (2)
# Set the keyboard repeat rate to the max
movw $0x0305, %ax
xorw %bx, %bx
int $0x16
# Check for video adapter and its parameters and allow the
# user to browse video modes.
call video # NOTE: we need %ds pointing
# to bootsector
# Get hd0 data...
xorw %ax, %ax
movw %ax, %ds
ldsw (4 * 0x41), %si
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
pushw %ax
movw %ax, %es
movw $0x0080, %di
movw $0x10, %cx
pushw %cx
cld
rep
movsb
# Get hd1 data...
xorw %ax, %ax
movw %ax, %ds
ldsw (4 * 0x46), %si
popw %cx
popw %es
movw $0x0090, %di
rep
movsb
# Check that there IS a hd1 :-)
movw $0x01500, %ax
movb $0x81, %dl
int $0x13
jc no_disk1
cmpb $3, %ah
je is_disk1
no_disk1:
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ax, %es
movw $0x0090, %di
movw $0x10, %cx
xorw %ax, %ax
cld
rep
stosb
is_disk1:
# Check for PS/2 pointing device
movw %cs, %ax # aka SETUPSEG
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ax, %ds
movb $0, (0x1ff) # default is no pointing device
int $0x11 # int 0x11: equipment list
testb $0x04, %al # check if mouse installed
jz no_psmouse
movb $0xAA, (0x1ff) # device present
no_psmouse:
#include "../../i386/boot/edd.S"
# Now we want to move to protected mode ...
cmpw $0, %cs:realmode_swtch
jz rmodeswtch_normal
lcall *%cs:realmode_swtch
jmp rmodeswtch_end
rmodeswtch_normal:
pushw %cs
call default_switch
rmodeswtch_end:
# we get the code32 start address and modify the below 'jmpi'
# (loader may have changed it)
movl %cs:code32_start, %eax
movl %eax, %cs:code32
# Now we move the system to its rightful place ... but we check if we have a
# big-kernel. In that case we *must* not move it ...
testb $LOADED_HIGH, %cs:loadflags
jz do_move0 # .. then we have a normal low
# loaded zImage
# .. or else we have a high
# loaded bzImage
jmp end_move # ... and we skip moving
do_move0:
movw $0x100, %ax # start of destination segment
movw %cs, %bp # aka SETUPSEG
subw $DELTA_INITSEG, %bp # aka INITSEG
movw %cs:start_sys_seg, %bx # start of source segment
cld
do_move:
movw %ax, %es # destination segment
incb %ah # instead of add ax,#0x100
movw %bx, %ds # source segment
addw $0x100, %bx
subw %di, %di
subw %si, %si
movw $0x800, %cx
rep
movsw
cmpw %bp, %bx # assume start_sys_seg > 0x200,
# so we will perhaps read one
# page more than needed, but
# never overwrite INITSEG
# because destination is a
# minimum one page below source
jb do_move
end_move:
# then we load the segment descriptors
movw %cs, %ax # aka SETUPSEG
movw %ax, %ds
# Check whether we need to be downward compatible with version <=201
cmpl $0, cmd_line_ptr
jne end_move_self # loader uses version >=202 features
cmpb $0x20, type_of_loader
je end_move_self # bootsect loader, we know of it
# Boot loader doesnt support boot protocol version 2.02.
# If we have our code not at 0x90000, we need to move it there now.
# We also then need to move the params behind it (commandline)
# Because we would overwrite the code on the current IP, we move
# it in two steps, jumping high after the first one.
movw %cs, %ax
cmpw $SETUPSEG, %ax
je end_move_self
cli # make sure we really have
# interrupts disabled !
# because after this the stack
# should not be used
subw $DELTA_INITSEG, %ax # aka INITSEG
movw %ss, %dx
cmpw %ax, %dx
jb move_self_1
addw $INITSEG, %dx
subw %ax, %dx # this will go into %ss after
# the move
move_self_1:
movw %ax, %ds
movw $INITSEG, %ax # real INITSEG
movw %ax, %es
movw %cs:setup_move_size, %cx
std # we have to move up, so we use
# direction down because the
# areas may overlap
movw %cx, %di
decw %di
movw %di, %si
subw $move_self_here+0x200, %cx
rep
movsb
ljmp $SETUPSEG, $move_self_here
move_self_here:
movw $move_self_here+0x200, %cx
rep
movsb
movw $SETUPSEG, %ax
movw %ax, %ds
movw %dx, %ss
end_move_self: # now we are at the right place
lidt idt_48 # load idt with 0,0
xorl %eax, %eax # Compute gdt_base
movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
shll $4, %eax
addl $gdt, %eax
movl %eax, (gdt_48+2)
lgdt gdt_48 # load gdt with whatever is
# appropriate
# that was painless, now we enable a20
call empty_8042
movb $0xD1, %al # command write
outb %al, $0x64
call empty_8042
movb $0xDF, %al # A20 on
outb %al, $0x60
call empty_8042
#
# You must preserve the other bits here. Otherwise embarrasing things
# like laptops powering off on boot happen. Corrected version by Kira
# Brown from Linux 2.2
#
inb $0x92, %al #
orb $02, %al # "fast A20" version
outb %al, $0x92 # some chips have only this
# wait until a20 really *is* enabled; it can take a fair amount of
# time on certain systems; Toshiba Tecras are known to have this
# problem. The memory location used here (0x200) is the int 0x80
# vector, which should be safe to use.
xorw %ax, %ax # segment 0x0000
movw %ax, %fs
decw %ax # segment 0xffff (HMA)
movw %ax, %gs
a20_wait:
incw %ax # unused memory location <0xfff0
movw %ax, %fs:(0x200) # we use the "int 0x80" vector
cmpw %gs:(0x210), %ax # and its corresponding HMA addr
je a20_wait # loop until no longer aliased
# make sure any possible coprocessor is properly reset..
xorw %ax, %ax
outb %al, $0xf0
call delay
outb %al, $0xf1
call delay
# well, that went ok, I hope. Now we mask all interrupts - the rest
# is done in init_IRQ().
movb $0xFF, %al # mask all interrupts for now
outb %al, $0xA1
call delay
movb $0xFB, %al # mask all irq's but irq2 which
outb %al, $0x21 # is cascaded
# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
# need no steenking BIOS anyway (except for the initial loading :-).
# The BIOS-routine wants lots of unnecessary data, and it's less
# "interesting" anyway. This is how REAL programmers do it.
#
# Well, now's the time to actually move into protected mode. To make
# things as simple as possible, we do no register set-up or anything,
# we let the gnu-compiled 32-bit programs do that. We just jump to
# absolute address 0x1000 (or the loader supplied one),
# in 32-bit protected mode.
#
# Note that the short jump isn't strictly needed, although there are
# reasons why it might be a good idea. It won't hurt in any case.
movw $1, %ax # protected mode (PE) bit
lmsw %ax # This is it!
jmp flush_instr
flush_instr:
xorw %bx, %bx # Flag to indicate a boot
xorl %esi, %esi # Pointer to real-mode code
movw %cs, %si
subw $DELTA_INITSEG, %si
shll $4, %esi # Convert to 32-bit pointer
# NOTE: For high loaded big kernels we need a
# jmpi 0x100000,__KERNEL_CS
#
# but we yet haven't reloaded the CS register, so the default size
# of the target offset still is 16 bit.
# However, using an operand prefix (0x66), the CPU will properly
# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
# Manual, Mixing 16-bit and 32-bit code, page 16-6)
.byte 0x66, 0xea # prefix + jmpi-opcode
code32: .long 0x1000 # will be set to 0x100000
# for big kernels
.word __KERNEL_CS
# Here's a bunch of information about your current kernel..
kernel_version: .ascii UTS_RELEASE
.ascii " ("
.ascii LINUX_COMPILE_BY
.ascii "@"
.ascii LINUX_COMPILE_HOST
.ascii ") "
.ascii UTS_VERSION
.byte 0
# This is the default real mode switch routine.
# to be called just before protected mode transition
default_switch:
cli # no interrupts allowed !
movb $0x80, %al # disable NMI for bootup
# sequence
outb %al, $0x70
lret
# This routine checks that the keyboard command queue is empty
# (after emptying the output buffers)
#
# Some machines have delusions that the keyboard buffer is always full
# with no keyboard attached...
#
# If there is no keyboard controller, we will usually get 0xff
# to all the reads. With each IO taking a microsecond and
# a timeout of 100,000 iterations, this can take about half a
# second ("delay" == outb to port 0x80). That should be ok,
# and should also be plenty of time for a real keyboard controller
# to empty.
#
empty_8042:
pushl %ecx
movl $100000, %ecx
empty_8042_loop:
decl %ecx
jz empty_8042_end_loop
call delay
inb $0x64, %al # 8042 status port
testb $1, %al # output buffer?
jz no_output
call delay
inb $0x60, %al # read it
jmp empty_8042_loop
no_output:
testb $2, %al # is input buffer full?
jnz empty_8042_loop # yes - loop
empty_8042_end_loop:
popl %ecx
ret
# Read the cmos clock. Return the seconds in al
gettime:
pushw %cx
movb $0x02, %ah
int $0x1a
movb %dh, %al # %dh contains the seconds
andb $0x0f, %al
movb %dh, %ah
movb $0x04, %cl
shrb %cl, %ah
aad
popw %cx
ret
# Delay is needed after doing I/O
delay:
outb %al,$0x80
ret
# Descriptor tables
gdt:
.word 0, 0, 0, 0 # dummy
.word 0, 0, 0, 0 # unused
.word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
.word 0 # base address = 0
.word 0x9A00 # code read/exec
.word 0x00CF # granularity = 4096, 386
# (+5th nibble of limit)
.word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
.word 0 # base address = 0
.word 0x9200 # data read/write
.word 0x00CF # granularity = 4096, 386
# (+5th nibble of limit)
gdt_end:
idt_48:
.word 0 # idt limit = 0
.word 0, 0 # idt base = 0L
gdt_48:
.word gdt_end-gdt-1 # gdt limit
.word 0, 0 # gdt base (filled in later)
# Include video setup & detection code
#include "../../i386/boot/video.S"
# Setup signature -- must be last
setup_sig1: .word SIG1
setup_sig2: .word SIG2
# After this point, there is some free space which is used by the video mode
# handling code to store the temporary mode table (not used by the kernel).
modelist:
.text
endtext:
.data
enddata:
.bss
endbss:
arch/x86_64/boot/tools/build.c deleted 100644 → 0
View file @ 4fd06960
/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 Martin Mares
*/
/*
* This file builds a disk-image from three different files:
*
* - bootsect: compatibility mbr which prints an error message if
* someone tries to boot the kernel directly.
* - setup: 8086 machine code, sets up system parm
* - system: 80386 code for actual system
*
* It does some checking that all files are of the correct type, and
* just writes the result to stdout, removing headers and padding to
* the right amount. It also writes some system data to stderr.
*/
/*
* Changes by tytso to allow root device specification
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
* Cross compiling fixes by Gertjan van Wingerde, July 1996
* Rewritten by Martin Mares, April 1997
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <stdarg.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/sysmacros.h>
#include <unistd.h>
#include <fcntl.h>
#include <asm/boot.h>
typedef unsigned char byte;
typedef unsigned short word;
typedef unsigned long u32;
#define DEFAULT_MAJOR_ROOT 0
#define DEFAULT_MINOR_ROOT 0
/* Minimal number of setup sectors (see also bootsect.S) */
#define SETUP_SECTS 4
byte buf[1024];
int fd;
int is_big_kernel;
void die(const char * str, ...)
{
va_list args;
va_start(args, str);
vfprintf(stderr, str, args);
fputc('\n', stderr);
exit(1);
}
void file_open(const char *name)
{
if ((fd = open(name, O_RDONLY, 0)) < 0)
die("Unable to open `%s': %m", name);
}
void usage(void)
{
die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
}
int main(int argc, char ** argv)
{
unsigned int i, c, sz, setup_sectors;
u32 sys_size;
byte major_root, minor_root;
struct stat sb;
if (argc > 2 && !strcmp(argv[1], "-b"))
{
is_big_kernel = 1;
argc--, argv++;
}
if ((argc < 4) || (argc > 5))
usage();
if (argc > 4) {
if (!strcmp(argv[4], "CURRENT")) {
if (stat("/", &sb)) {
perror("/");
die("Couldn't stat /");
}
major_root = major(sb.st_dev);
minor_root = minor(sb.st_dev);
} else if (strcmp(argv[4], "FLOPPY")) {
if (stat(argv[4], &sb)) {
perror(argv[4]);
die("Couldn't stat root device.");
}
major_root = major(sb.st_rdev);
minor_root = minor(sb.st_rdev);
} else {
major_root = 0;
minor_root = 0;
}
} else {
major_root = DEFAULT_MAJOR_ROOT;
minor_root = DEFAULT_MINOR_ROOT;
}
fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
file_open(argv[1]);
i = read(fd, buf, sizeof(buf));
fprintf(stderr,"Boot sector %d bytes.\n",i);
if (i != 512)
die("Boot block must be exactly 512 bytes");
if (buf[510] != 0x55 || buf[511] != 0xaa)
die("Boot block hasn't got boot flag (0xAA55)");
buf[508] = minor_root;
buf[509] = major_root;
if (write(1, buf, 512) != 512)
die("Write call failed");
close (fd);
file_open(argv[2]); /* Copy the setup code */
for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
if (write(1, buf, c) != c)
die("Write call failed");
if (c != 0)
die("read-error on `setup'");
close (fd);
setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
/* for compatibility with ancient versions of LILO. */
if (setup_sectors < SETUP_SECTS)
setup_sectors = SETUP_SECTS;
fprintf(stderr, "Setup is %d bytes.\n", i);
memset(buf, 0, sizeof(buf));
while (i < setup_sectors * 512) {
c = setup_sectors * 512 - i;
if (c > sizeof(buf))
c = sizeof(buf);
if (write(1, buf, c) != c)
die("Write call failed");
i += c;
}
file_open(argv[3]);
if (fstat (fd, &sb))
die("Unable to stat `%s': %m", argv[3]);
sz = sb.st_size;
fprintf (stderr, "System is %d kB\n", sz/1024);
sys_size = (sz + 15) / 16;
if (!is_big_kernel && sys_size > DEF_SYSSIZE)
die("System is too big. Try using bzImage or modules.");
while (sz > 0) {
int l, n;
l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
if ((n=read(fd, buf, l)) != l) {
if (n < 0)
die("Error reading %s: %m", argv[3]);
else
die("%s: Unexpected EOF", argv[3]);
}
if (write(1, buf, l) != l)
die("Write failed");
sz -= l;
}
close(fd);
if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
die("Output: seek failed");
buf[0] = setup_sectors;
if (write(1, buf, 1) != 1)
die("Write of setup sector count failed");
if (lseek(1, 500, SEEK_SET) != 500)
die("Output: seek failed");
buf[0] = (sys_size & 0xff);
buf[1] = ((sys_size >> 8) & 0xff);
buf[2] = ((sys_size >> 16) & 0xff);
buf[3] = ((sys_size >> 24) & 0xff);
if (write(1, buf, 4) != 4)
die("Write of image length failed");
return 0; /* Everything is OK */
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7