Commit 92676ac9 authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab

[media] m88ds3103: fix TS mode config

TS mode was configured wrongly.
Reported-by: default avatarDavid Howells <dhowells@redhat.com>
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
parent 39c0029e
...@@ -321,32 +321,32 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe) ...@@ -321,32 +321,32 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
case M88DS3103_TS_SERIAL: case M88DS3103_TS_SERIAL:
u8tmp1 = 0x00; u8tmp1 = 0x00;
ts_clk = 0; ts_clk = 0;
u8tmp = 0x04; u8tmp = 0x46;
break; break;
case M88DS3103_TS_SERIAL_D7: case M88DS3103_TS_SERIAL_D7:
u8tmp1 = 0x20; u8tmp1 = 0x20;
ts_clk = 0; ts_clk = 0;
u8tmp = 0x04; u8tmp = 0x46;
break; break;
case M88DS3103_TS_PARALLEL: case M88DS3103_TS_PARALLEL:
ts_clk = 24000; ts_clk = 24000;
u8tmp = 0x00; u8tmp = 0x42;
break; break;
case M88DS3103_TS_PARALLEL_12: case M88DS3103_TS_PARALLEL_12:
ts_clk = 12000; ts_clk = 12000;
u8tmp = 0x00; u8tmp = 0x42;
break; break;
case M88DS3103_TS_PARALLEL_16: case M88DS3103_TS_PARALLEL_16:
ts_clk = 16000; ts_clk = 16000;
u8tmp = 0x00; u8tmp = 0x42;
break; break;
case M88DS3103_TS_PARALLEL_19_2: case M88DS3103_TS_PARALLEL_19_2:
ts_clk = 19200; ts_clk = 19200;
u8tmp = 0x00; u8tmp = 0x42;
break; break;
case M88DS3103_TS_CI: case M88DS3103_TS_CI:
ts_clk = 6000; ts_clk = 6000;
u8tmp = 0x01; u8tmp = 0x43;
break; break;
default: default:
dev_dbg(&priv->i2c->dev, "%s: invalid ts_mode\n", __func__); dev_dbg(&priv->i2c->dev, "%s: invalid ts_mode\n", __func__);
...@@ -355,7 +355,7 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe) ...@@ -355,7 +355,7 @@ static int m88ds3103_set_frontend(struct dvb_frontend *fe)
} }
/* TS mode */ /* TS mode */
ret = m88ds3103_wr_reg_mask(priv, 0xfd, u8tmp, 0x05); ret = m88ds3103_wr_reg(priv, 0xfd, u8tmp);
if (ret) if (ret)
goto err; goto err;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment