Commit 926930b2 authored by Sivakumar Subramani's avatar Sivakumar Subramani Committed by Jeff Garzik

S2IO: Added a loadable parameter to enable or disable vlan stripping in frame.

- Added code to not to strip vlan tag when driver is in promiscuous mode
- Added module loadable parameter 'vlan_tag_strip" through which user can
  enable or disable vlan stripping irrespective of mode
  ( promiscuous or non-promiscuous ).
Signed-off-by: default avatarSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 9fc93a41
......@@ -430,6 +430,7 @@ struct XENA_dev_config {
#define TX_PA_CFG_IGNORE_SNAP_OUI BIT(2)
#define TX_PA_CFG_IGNORE_LLC_CTRL BIT(3)
#define TX_PA_CFG_IGNORE_L2_ERR BIT(6)
#define RX_PA_CFG_STRIP_VLAN_TAG BIT(15)
/* Recent add, used only debug purposes. */
u64 pcc_enable;
......
......@@ -42,6 +42,14 @@
* Possible values '1' for enable '0' for disable. Default is '0'
* lro_max_pkts: This parameter defines maximum number of packets can be
* aggregated as a single large packet
* napi: This parameter used to enable/disable NAPI (polling Rx)
* Possible values '1' for enable and '0' for disable. Default is '1'
* ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
* Possible values '1' for enable and '0' for disable. Default is '0'
* vlan_tag_strip: This can be used to enable or disable vlan stripping.
* Possible values '1' for enable , '0' for disable.
* Default is '2' - which means disable in promisc mode
* and enable in non-promiscuous mode.
************************************************************************/
#include <linux/module.h>
......@@ -293,6 +301,9 @@ static void s2io_vlan_rx_register(struct net_device *dev,
spin_unlock_irqrestore(&nic->tx_lock, flags);
}
/* A flag indicating whether 'RX_PA_CFG_STRIP_VLAN_TAG' bit is set or not */
int vlan_strip_flag;
/* Unregister the vlan */
static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
{
......@@ -404,6 +415,7 @@ S2IO_PARM_INT(indicate_max_pkts, 0);
S2IO_PARM_INT(napi, 1);
S2IO_PARM_INT(ufo, 0);
S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
......@@ -1953,6 +1965,13 @@ static int start_nic(struct s2io_nic *nic)
writeq(val64, &bar0->rx_pa_cfg);
}
if (vlan_tag_strip == 0) {
val64 = readq(&bar0->rx_pa_cfg);
val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
writeq(val64, &bar0->rx_pa_cfg);
vlan_strip_flag = 0;
}
/*
* Enabling MC-RLDRAM. After enabling the device, we timeout
* for around 100ms, which is approximately the time required
......@@ -4352,6 +4371,13 @@ static void s2io_set_multicast(struct net_device *dev)
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
if (vlan_tag_strip != 1) {
val64 = readq(&bar0->rx_pa_cfg);
val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
writeq(val64, &bar0->rx_pa_cfg);
vlan_strip_flag = 0;
}
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 1;
DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
......@@ -4367,6 +4393,13 @@ static void s2io_set_multicast(struct net_device *dev)
writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
writel((u32) (val64 >> 32), (add + 4));
if (vlan_tag_strip != 0) {
val64 = readq(&bar0->rx_pa_cfg);
val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
writeq(val64, &bar0->rx_pa_cfg);
vlan_strip_flag = 1;
}
val64 = readq(&bar0->mac_cfg);
sp->promisc_flg = 0;
DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n",
......@@ -6614,7 +6647,8 @@ static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
if ((sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2) &&
vlan_strip_flag)) {
/* Queueing the vlan frame to the upper layer */
if (napi)
vlan_hwaccel_receive_skb(skb, sp->vlgrp,
......
......@@ -297,6 +297,9 @@ struct stat_block {
struct xpakStat xpak_stat;
};
/* Default value for 'vlan_strip_tag' configuration parameter */
#define NO_STRIP_IN_PROMISC 2
/*
* Structures representing different init time configuration
* parameters of the NIC.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment