Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (96 commits)
  sh: add support for SMSC Polaris platform
  sh: fix the HD64461 level-triggered interrupts handling
  sh: sh-rtc wakeup support
  sh: sh-rtc invalid time rework
  sh: sh-rtc carry interrupt rework
  sh: disallow kexec virtual entry
  sh: kexec jump: fix for ftrace.
  sh: kexec: Drop SR.BL bit toggling.
  sh: add kexec jump support
  sh: rework kexec segment code
  sh: simplify kexec vbr code
  sh: Flush only the needed range when unmapping a VMA.
  sh: Update debugfs ASID dumping for 16-bit ASID support.
  sh: tlb-pteaex: Kill off legacy PTEA updates.
  sh: Support for extended ASIDs on PTEAEX-capable SH-X3 cores.
  sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp
  sh: espt-giga board support
  sh: dma: Make G2 DMA configurable.
  sh: dma: Make PVR2 DMA configurable.
  sh: Move IRQ multi definition of DMAC to defconfig
  ...

arch/sh/Kconfig

@@ -107,6 +107,9 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
+config SYS_SUPPORTS_CMT
+	bool
+
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -176,6 +179,10 @@ config CPU_SHX2
 config CPU_SHX3
 	bool
 
+config ARCH_SHMOBILE
+	bool
+	select ARCH_SUSPEND_POSSIBLE
+
 choice
 	prompt "Processor sub-type selection"
 
@@ -188,6 +195,7 @@ choice
 config CPU_SUBTYPE_SH7619
 	bool "Support SH7619 processor"
 	select CPU_SH2
+	select SYS_SUPPORTS_CMT
 
 # SH-2A Processor Support
 
@@ -200,15 +208,18 @@ config CPU_SUBTYPE_SH7203
 	bool "Support SH7203 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7206
 	bool "Support SH7206 processor"
 	select CPU_SH2A
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7263
 	bool "Support SH7263 processor"
 	select CPU_SH2A
 	select CPU_HAS_FPU
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_MXG
 	bool "Support MX-G processor"
@@ -323,7 +334,9 @@ config CPU_SUBTYPE_SH7723
 	bool "Support SH7723 processor"
 	select CPU_SH4A
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_CMT
 	help
 	  Select SH7723 if you have an SH-MobileR2 CPU.
 
@@ -348,6 +361,14 @@ config CPU_SUBTYPE_SH7785
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 
+config CPU_SUBTYPE_SH7786
+	bool "Support SH7786 processor"
+	select CPU_SH4A
+	select CPU_SHX3
+	select CPU_HAS_PTEAEX
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+
 config CPU_SUBTYPE_SHX3
 	bool "Support SH-X3 processor"
 	select CPU_SH4A
@@ -362,20 +383,26 @@ config CPU_SUBTYPE_SHX3
 config CPU_SUBTYPE_SH7343
 	bool "Support SH7343 processor"
 	select CPU_SH4AL_DSP
+	select ARCH_SHMOBILE
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7722
 	bool "Support SH7722 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 config CPU_SUBTYPE_SH7366
 	bool "Support SH7366 processor"
 	select CPU_SH4AL_DSP
 	select CPU_SHX2
+	select ARCH_SHMOBILE
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_CMT
 
 # SH-5 Processor Support
 
@@ -398,25 +425,34 @@ source "arch/sh/boards/Kconfig"
 menu "Timer and clock configuration"
 
 config SH_TMU
-	def_bool y
-	prompt "TMU timer support"
+	bool "TMU timer support"
 	depends on CPU_SH3 || CPU_SH4
+	default y
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables the use of the TMU as the system timer.
 
 config SH_CMT
-	def_bool y
-	prompt "CMT timer support"
-	depends on CPU_SH2 && !CPU_SUBTYPE_MXG
+	bool "CMT timer support"
+	depends on SYS_SUPPORTS_CMT && CPU_SH2
+	default y
 	help
 	  This enables the use of the CMT as the system timer.
 
+#
+# Support for the new-style CMT driver. This will replace SH_CMT
+# once its other dependencies are merged.
+#
+config SH_TIMER_CMT
+	bool "CMT clockevents driver"
+	depends on SYS_SUPPORTS_CMT && !SH_CMT
+	select GENERIC_CLOCKEVENTS
+
 config SH_MTU2
-	def_bool n
-	prompt "MTU2 timer support"
+	bool "MTU2 timer support"
 	depends on CPU_SH2A
+	default y
 	help
 	  This enables the use of the MTU2 as the system timer.
 
@@ -426,7 +462,8 @@ config SH_TIMER_IRQ
 			CPU_SUBTYPE_SH7763
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
-	default "142" if CPU_SUBTYPE_SH7203
+	default "142" if CPU_SUBTYPE_SH7203 && SH_CMT
+	default "153" if CPU_SUBTYPE_SH7203 && SH_MTU2
 	default "238" if CPU_SUBTYPE_MXG
 	default "16"
 
@@ -438,7 +475,8 @@ config SH_PCLK_FREQ
 	default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
-			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
+			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG    || \
+			      CPU_SUBTYPE_SH7786
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
@@ -521,6 +559,13 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on SUPERH32 && KEXEC && HIBERNATION && EXPERIMENTAL
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code via KEXEC
+
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS

arch/sh/Kconfig.cpu

@@ -104,6 +104,9 @@ config CPU_HAS_SR_RB
 config CPU_HAS_PTEA
 	bool
 
+config CPU_HAS_PTEAEX
+	bool
+
 config CPU_HAS_DSP
 	bool
 

arch/sh/Makefile

@@ -80,6 +80,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)			:= zImage
 defaultimage-$(CONFIG_SH_SH7785LCR)		:= uImage
 defaultimage-$(CONFIG_SH_RSK)			:= uImage
+defaultimage-$(CONFIG_SH_URQUELL)		:= uImage
 defaultimage-$(CONFIG_SH_7206_SOLUTION_ENGINE)	:= vmlinux
 defaultimage-$(CONFIG_SH_7619_SOLUTION_ENGINE)	:= vmlinux
 

arch/sh/boards/Kconfig

@@ -155,17 +155,22 @@ config SH_SH7785LCR
 
 config SH_SH7785LCR_29BIT_PHYSMAPS
 	bool "SH7785LCR 29bit physmaps"
-	depends on SH_SH7785LCR
+	depends on SH_SH7785LCR && 29BIT
 	default y
 	help
 	  This board has 2 physical memory maps. It can be changed with
 	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
 	  you can access all on-board device in 29bit address mode.
 
+config SH_URQUELL
+	bool "Urquell"
+	depends on CPU_SUBTYPE_SH7786
+	select ARCH_REQUIRE_GPIOLIB
+
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
@@ -173,7 +178,7 @@ config SH_MIGOR
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -185,6 +190,13 @@ config SH_SH7763RDP
 	  Select SH7763RDP if configuring for a Renesas SH7763
 	  evaluation board.
 
+config SH_ESPT
+	bool "ESPT"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select ESPT if configuring for a Renesas SH7763
+	  with gigabit ether evaluation board.
+
 config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
@@ -240,7 +252,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
 
@@ -249,6 +261,13 @@ config SH_CAYMAN
 	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
 	select SYS_SUPPORTS_PCI
 
+config SH_POLARIS
+	bool "SMSC Polaris"
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select if configuring for an SMSC Polaris development board
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"

arch/sh/boards/Makefile

@@ -4,5 +4,8 @@
 obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
+obj-$(CONFIG_SH_ESPT)		+= board-espt.o
+obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o

arch/sh/boards/board-ap325rxa.c

@@ -166,6 +166,16 @@ static void ap320_wvga_power_on(void *board_data)
 	ctrl_outw(0x100, FPGA_BKLREG);
 }
 
+static void ap320_wvga_power_off(void *board_data)
+{
+	/* backlight */
+	ctrl_outw(0, FPGA_BKLREG);
+	gpio_set_value(GPIO_PTS3, 1);
+
+	/* ASD AP-320/325 LCD OFF */
+	ctrl_outw(0, FPGA_LCDREG);
+}
+
 static struct sh_mobile_lcdc_info lcdc_info = {
 	.clock_source = LCDC_CLK_EXTERNAL,
 	.ch[0] = {
@@ -191,6 +201,7 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 		},
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
+			.display_off = ap320_wvga_power_off,
 		},
 	}
 };

arch/sh/boards/board-espt.c

+/*
+ * Data Technology Inc. ESPT-GIGA board suport
+ *
+ * Copyright (C) 2008, 2009 Renesas Solutions Corp.
+ * Copyright (C) 2008, 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+#include <asm/sh_eth.h>
+
+/* NOR Flash */
+static struct mtd_partition espt_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * SZ_128K),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * SZ_128K),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data espt_nor_flash_data = {
+	.width = 2,
+	.parts = espt_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(espt_nor_flash_partitions),
+};
+
+static struct resource espt_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = SZ_8M - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device espt_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = espt_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(espt_nor_flash_resources),
+	.dev = {
+		.platform_data = &espt_nor_flash_data,
+	},
+};
+
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 57,   /* irq number */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 0,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device espt_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
+static struct platform_device *espt_devices[] __initdata = {
+	&espt_nor_flash_device,
+	&espt_eth_device,
+};
+
+static int __init espt_devices_setup(void)
+{
+	return platform_add_devices(espt_devices,
+				    ARRAY_SIZE(espt_devices));
+}
+device_initcall(espt_devices_setup);
+
+static struct sh_machine_vector mv_espt __initmv = {
+	.mv_name = "ESPT-GIGA",
+};

arch/sh/boards/board-polaris.c

+/*
+ * June 2006 steve.glendinning@smsc.com
+ *
+ * Polaris-specific resource declaration
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+#include <cpu/gpio.h>
+#include <mach-se/mach/se.h>
+
+#define BCR2		(0xFFFFFF62)
+#define WCR2		(0xFFFFFF66)
+#define AREA5_WAIT_CTRL	(0x1C00)
+#define WAIT_STATES_10	(0x7)
+
+static struct resource smsc911x_resources[] = {
+	[0] = {
+		.name		= "smsc911x-memory",
+		.start		= PA_EXT5,
+		.end		= PA_EXT5 + 0x1fff,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name		= "smsc911x-irq",
+		.start		= IRQ0_IRQ,
+		.end		= IRQ0_IRQ,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc911x_resources),
+	.resource	= smsc911x_resources,
+	.dev = {
+		.platform_data = &smsc911x_config,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 8,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PORT_PCDR,
+		.end	= PORT_PCDR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *polaris_devices[] __initdata = {
+	&smsc911x_device,
+	&heartbeat_device,
+};
+
+static int __init polaris_initialise(void)
+{
+	u16 wcr, bcr_mask;
+
+	printk(KERN_INFO "Configuring Polaris external bus\n");
+
+	/* Configure area 5 with 2 wait states */
+	wcr = ctrl_inw(WCR2);
+	wcr &= (~AREA5_WAIT_CTRL);
+	wcr |= (WAIT_STATES_10 << 10);
+	ctrl_outw(wcr, WCR2);
+
+	/* Configure area 5 for 32-bit access */
+	bcr_mask = ctrl_inw(BCR2);
+	bcr_mask |= 1 << 10;
+	ctrl_outw(bcr_mask, BCR2);
+
+	return platform_add_devices(polaris_devices,
+				    ARRAY_SIZE(polaris_devices));
+}
+arch_initcall(polaris_initialise);
+
+static struct ipr_data ipr_irq_table[] = {
+	/* External IRQs */
+	{ IRQ0_IRQ, 0,  0,  1, },	/* IRQ0 */
+	{ IRQ1_IRQ, 0,  4,  1, },	/* IRQ1 */
+};
+
+static unsigned long ipr_offsets[] = {
+	INTC_IPRC
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "sh7709-ext",
+	},
+};
+
+static void __init init_polaris_irq(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
+
+static struct sh_machine_vector mv_polaris __initmv = {
+	.mv_name		= "Polaris",
+	.mv_nr_irqs		= 61,
+	.mv_init_irq		= init_polaris_irq,
+};

arch/sh/boards/board-sh7785lcr.c

@@ -275,7 +275,18 @@ void __init init_sh7785lcr_IRQ(void)
 
 static void sh7785lcr_power_off(void)
 {
-	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+	unsigned char *p;
+
+	p = ioremap(PLD_POFCR, PLD_POFCR + 1);
+	if (!p) {
+		printk(KERN_ERR "%s: ioremap error.\n", __func__);
+		return;
+	}
+	*p = 0x01;
+	iounmap(p);
+	set_bl_bit();
+	while (1)
+		cpu_relax();
 }
 
 /* Initialize the board */

arch/sh/boards/board-urquell.c

+/*
+ * Renesas Technology Corp. SH7786 Urquell Support.
+ *
+ * Copyright (C) 2008  Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <mach/urquell.h>
+#include <cpu/sh7786.h>
+#include <asm/heartbeat.h>
+#include <asm/sizes.h>
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= BOARDREG(SLEDR),
+		.end	= BOARDREG(SLEDR),
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x05800300,
+		.end    = 0x0580030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 11,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_512K,
+		.mask_flags	= MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *urquell_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&nor_flash_device,
+};
+
+static int __init urquell_devices_setup(void)
+{
+	/* USB */
+	gpio_request(GPIO_FN_USB_OVC0,  NULL);
+	gpio_request(GPIO_FN_USB_PENC0, NULL);
+
+	return platform_add_devices(urquell_devices,
+				    ARRAY_SIZE(urquell_devices));
+}
+device_initcall(urquell_devices_setup);
+
+static void urquell_power_off(void)
+{
+	__raw_writew(0xa5a5, UBOARDREG(SRSTR));
+}
+
+static void __init urquell_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK);
+}
+
+/* Initialize the board */
+static void __init urquell_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
+
+	pm_power_off = urquell_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_urquell __initmv = {
+	.mv_name	= "Urquell",
+	.mv_setup	= urquell_setup,
+	.mv_init_irq	= urquell_init_irq,
+};

arch/sh/boards/mach-highlander/Kconfig

@@ -18,7 +18,7 @@ config SH_R7780MP
 config SH_R7785RP
 	bool "R7785RP board support"
 	depends on CPU_SUBTYPE_SH7785
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 
 endchoice
 

arch/sh/boards/mach-hp6xx/pm_wakeup.S

@@ -10,47 +10,32 @@
 #include <linux/linkage.h>
 #include <cpu/mmu_context.h>
 
-#define k0	r0
-#define k1	r1
-#define k2	r2
-#define k3	r3
-#define k4	r4
-
 /*
  * Kernel mode register usage:
  *	k0	scratch
  *	k1	scratch
- *	k2	scratch (Exception code)
- *	k3	scratch (Return address)
- *	k4	scratch
- *	k5	reserved
- *	k6	Global Interrupt Mask (0--15 << 4)
- *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ * For more details, please have a look at entry.S
  */
 
+#define k0	r0
+#define k1	r1
+
 ENTRY(wakeup_start)
 ! clear STBY bit
-	mov	#-126, k2
+	mov	#-126, k1
    	and	#127, k0
-	mov.b	k0, @k2
+	mov.b	k0, @k1
 ! enable refresh
 	mov.l	5f, k1
 	mov.w	6f, k0
   	mov.w	k0, @k1
 ! jump to handler
-	mov.l	2f, k2
-	mov.l	3f, k3
-	mov.l	@k2, k2
-
 	mov.l	4f, k1
 	jmp	@k1
 	 nop
 
 	.align	2
-1:	.long	EXPEVT
-2:	.long	INTEVT
-3:	.long	ret_from_irq
-4:	.long	handle_exception
+4:	.long	handle_interrupt
 5:	.long	0xffffff68
 6:	.word	0x0524
 

arch/sh/boards/mach-hp6xx/setup.c

@@ -115,7 +115,6 @@ static struct sh_machine_vector mv_hp6xx __initmv = {
 	.mv_setup = hp6xx_setup,
 	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
 	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
 	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
 	.mv_init_irq = hp6xx_init_irq,
 };

arch/sh/boards/mach-migor/setup.c

@@ -450,6 +450,14 @@ static struct spi_board_info migor_spi_devices[] = {
 
 static int __init migor_devices_setup(void)
 {
+
+#ifdef CONFIG_PM
+	/* Let D11 LED show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit D12 LED show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+#else
 	/* Lit D11 LED */
 	gpio_request(GPIO_PTJ7, NULL);
 	gpio_direction_output(GPIO_PTJ7, 1);
@@ -459,6 +467,7 @@ static int __init migor_devices_setup(void)
 	gpio_request(GPIO_PTJ5, NULL);
 	gpio_direction_output(GPIO_PTJ5, 1);
 	gpio_export(GPIO_PTJ5, 0);
+#endif
 
 	/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
 	gpio_request(GPIO_FN_IRQ0, NULL);

arch/sh/boards/mach-rsk/Kconfig

@@ -10,7 +10,7 @@ config SH_RSK7201
 
 config SH_RSK7203
 	bool "RSK7203"
-	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	depends on CPU_SUBTYPE_SH7203
 
 endchoice

arch/sh/boards/mach-sh7763rdp/setup.c

@@ -63,15 +63,19 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
-/* SH-Ether */
+/*
+ * SH-Ether
+ *
+ * SH Ether of SH7763 has multi IRQ handling.
+ * (57,58,59 -> 57)
+ */
 static struct resource sh_eth_resources[] = {
 	{
 		.start  = 0xFEE00800,   /* use eth1 */
 		.end    = 0xFEE00F7C - 1,
 		.flags  = IORESOURCE_MEM,
 	}, {
-		.start  = 58,   /* irq number */
-		.end    = 58,
+		.start  = 57,   /* irq number */
 		.flags  = IORESOURCE_IRQ,
 	},
 };

arch/sh/boot/Makefile

@@ -33,20 +33,24 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
-ifeq ($(CONFIG_32BIT),y)
-KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
-		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_ZERO_PAGE_OFFSET)]')
-else
+KERNEL_MEMORY := 0x00000000
+ifeq ($(CONFIG_PMB_FIXED),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START) & 0x1fffffff]')
+endif
+ifeq ($(CONFIG_29BIT),y)
+KERNEL_MEMORY := $(shell /bin/bash -c 'printf "0x%08x" \
+		     $$[$(CONFIG_MEMORY_START)]')
+endif
+
 KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)]')
-endif
 
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
-			$(CONFIG_MEMORY_START) + \
+			$(KERNEL_MEMORY) + \
 			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@

arch/sh/cchips/hd6446x/hd64461.c

@@ -53,21 +53,22 @@ static struct irq_chip hd64461_irq_chip = {
 	.unmask		= hd64461_unmask_irq,
 };
 
-int hd64461_irq_demux(int irq)
+static void hd64461_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
-	if (irq == CONFIG_HD64461_IRQ) {
-		unsigned short bit;
-		unsigned short nirr = inw(HD64461_NIRR);
-		unsigned short nimr = inw(HD64461_NIMR);
-		int i;
+	unsigned short intv = ctrl_inw(HD64461_NIRR);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = HD64461_IRQBASE;
+
+	intv &= (1 << HD64461_IRQ_NUM) - 1;
 
-		nirr &= ~nimr;
-		for (bit = 1, i = 0; i < 16; bit <<= 1, i++)
-			if (nirr & bit)
-				break;
-		irq = HD64461_IRQBASE + i;
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
 	}
-	return irq;
 }
 
 int __init setup_hd64461(void)
@@ -93,6 +94,9 @@ int __init setup_hd64461(void)
 		set_irq_chip_and_handler(i, &hd64461_irq_chip,
 					 handle_level_irq);
 
+	set_irq_chained_handler(CONFIG_HD64461_IRQ, hd64461_irq_demux);
+	set_irq_type(CONFIG_HD64461_IRQ, IRQ_TYPE_LEVEL_LOW);
+
 #ifdef CONFIG_HD64461_ENABLER
 	printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
 	__raw_writeb(0x4c, HD64461_PCC1CSCIER);

arch/sh/drivers/dma/Kconfig

@@ -9,13 +9,21 @@ config SH_DMA
 	select SH_DMA_API
 	default n
 
+config SH_DMA_IRQ_MULTI
+	bool
+	depends on SH_DMA
+	default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \
+		CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \
+		CPU_SUBTYPE_SH7091 || CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \
+		CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+
 config NR_ONCHIP_DMA_CHANNELS
 	int
 	depends on SH_DMA
-	default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
-	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R
-	default "12" if CPU_SUBTYPE_SH7780
-	default "4"
+	default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7750S
+	default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7760
+	default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	default "6"
 	help
 	  This allows you to specify the number of channels that the on-chip
 	  DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the
@@ -46,4 +54,28 @@ config SH_DMABRG
 	  of the SH7760.
 	  Say Y if you want to use Audio/USB DMA on your SH7760 board.
 
+config PVR2_DMA
+	tristate "PowerVR 2 DMAC support"
+	depends on SH_DREAMCAST && SH_DMA
+	help
+	  Selecting this will enable support for the PVR2 DMA controller.
+	  As this chains off of the on-chip DMAC, that must also be
+	  enabled by default.
+
+	  This is primarily used by the pvr2fb framebuffer driver for
+	  certain optimizations, but is not necessary for functionality.
+
+	  If in doubt, say N.
+
+config G2_DMA
+	tristate "G2 Bus DMA support"
+	depends on SH_DREAMCAST
+	select SH_DMA_API
+	help
+	  This enables support for the DMA controller for the Dreamcast's
+	  G2 bus. Drivers that want this will generally enable this on
+	  their own.
+
+	  If in doubt, say N.
+
 endmenu

arch/sh/drivers/dma/Makefile

@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_SH_DMA_API)	+= dma-api.o dma-sysfs.o
 obj-$(CONFIG_SH_DMA)		+= dma-sh.o
-obj-$(CONFIG_SH_DREAMCAST)	+= dma-pvr2.o dma-g2.o
+obj-$(CONFIG_PVR2_DMA)		+= dma-pvr2.o
+obj-$(CONFIG_G2_DMA)		+= dma-g2.o
 obj-$(CONFIG_SH_DMABRG)		+= dmabrg.o

arch/sh/drivers/dma/dma-sh.c

@@ -17,28 +17,16 @@
 #include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include "dma-sh.h"
-
-static int dmte_irq_map[] = {
-	DMTE0_IRQ,
-	DMTE1_IRQ,
-	DMTE2_IRQ,
-	DMTE3_IRQ,
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7721)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7709)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE4_IRQ,
-	DMTE5_IRQ,
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
-    defined(CONFIG_CPU_SUBTYPE_SH7780)
-	DMTE6_IRQ,
-	DMTE7_IRQ,
+#include <asm/dma-sh.h>
+
+#if defined(DMAE1_IRQ)
+#define NR_DMAE		2
+#else
+#define NR_DMAE		1
 #endif
+
+static const char *dmae_name[] = {
+	"DMAC Address Error0", "DMAC Address Error1"
 };
 
 static inline unsigned int get_dmte_irq(unsigned int chan)
@@ -46,7 +34,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
 	unsigned int irq = 0;
 	if (chan < ARRAY_SIZE(dmte_irq_map))
 		irq = dmte_irq_map[chan];
+
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	if (irq > DMTE6_IRQ)
+		return DMTE6_IRQ;
+	return DMTE0_IRQ;
+#else
 	return irq;
+#endif
 }
 
 /*
@@ -59,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan)
  */
 static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
 {
-	u32 chcr = ctrl_inl(CHCR[chan->chan]);
+	u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
 }
@@ -75,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id)
 	struct dma_channel *chan = dev_id;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 
 	if (!(chcr & CHCR_TE))
 		return IRQ_NONE;
 
 	chcr &= ~(CHCR_IE | CHCR_DE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	wake_up(&chan->wait_queue);
 
@@ -94,7 +89,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan)
 		return 0;
 
 	return request_irq(get_dmte_irq(chan->chan), dma_tei,
-			   IRQF_DISABLED, chan->dev_id, chan);
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
+#endif
+				chan->dev_id, chan);
 }
 
 static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 		chan->flags &= ~DMA_TEI_CAPABLE;
 	}
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	chan->flags |= DMA_CONFIGURED;
 	return 0;
@@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan)
 	int irq;
 	u32 chcr;
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr |= CHCR_DE;
 
 	if (chan->flags & DMA_TEI_CAPABLE)
 		chcr |= CHCR_IE;
 
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 
 	if (chan->flags & DMA_TEI_CAPABLE) {
 		irq = get_dmte_irq(chan->chan);
@@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan)
 		disable_irq(irq);
 	}
 
-	chcr = ctrl_inl(CHCR[chan->chan]);
+	chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR);
 	chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
-	ctrl_outl(chcr, CHCR[chan->chan]);
+	ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR));
 }
 
 static int sh_dmac_xfer_dma(struct dma_channel *chan)
@@ -183,12 +183,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 	 */
 	if (chan->sar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->sar, SAR[chan->chan]);
+		ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR));
 	if (chan->dar || (mach_is_dreamcast() &&
 			  chan->chan == PVR2_CASCADE_CHAN))
-		ctrl_outl(chan->dar, DAR[chan->chan]);
+		ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR));
 
-	ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
+	ctrl_outl(chan->count >> calc_xmit_shift(chan),
+		(dma_base_addr[chan->chan] + TCR));
 
 	sh_dmac_enable_dma(chan);
 
@@ -197,36 +198,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
 
 static int sh_dmac_get_dma_residue(struct dma_channel *chan)
 {
-	if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE))
+	if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE))
 		return 0;
 
-	return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
+	return ctrl_inl(dma_base_addr[chan->chan] + TCR)
+		 << calc_xmit_shift(chan);
 }
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7780) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
-#define dmaor_read_reg()	ctrl_inw(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outw(data, DMAOR)
-#else
-#define dmaor_read_reg()	ctrl_inl(DMAOR)
-#define dmaor_write_reg(data)	ctrl_outl(data, DMAOR)
-#endif
-
-static inline int dmaor_reset(void)
+static inline int dmaor_reset(int no)
 {
-	unsigned long dmaor = dmaor_read_reg();
+	unsigned long dmaor = dmaor_read_reg(no);
 
 	/* Try to clear the error flags first, incase they are set */
 	dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	dmaor |= DMAOR_INIT;
-	dmaor_write_reg(dmaor);
+	dmaor_write_reg(no, dmaor);
 
 	/* See if we got an error again */
-	if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+	if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) {
 		printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
 		return -EINVAL;
 	}
@@ -237,10 +228,33 @@ static inline int dmaor_reset(void)
 #if defined(CONFIG_CPU_SH4)
 static irqreturn_t dma_err(int irq, void *dummy)
 {
-	dmaor_reset();
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	int cnt = 0;
+	switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+	case DMTE6_IRQ:
+		cnt++;
+#endif
+	case DMTE0_IRQ:
+		if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+			disable_irq(irq);
+			/* DMA multi and error IRQ */
+			return IRQ_HANDLED;
+		}
+	default:
+		return IRQ_NONE;
+	}
+#else
+	dmaor_reset(0);
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	dmaor_reset(1);
+#endif
 	disable_irq(irq);
 
 	return IRQ_HANDLED;
+#endif
 }
 #endif
 
@@ -259,24 +273,59 @@ static struct dma_info sh_dmac_info = {
 	.flags		= DMAC_CHANNELS_TEI_CAPABLE,
 };
 
+#ifdef CONFIG_CPU_SH4
+static unsigned int get_dma_error_irq(int n)
+{
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+	return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6);
+#else
+	return (n == 0) ? DMAE0_IRQ :
+#if defined(DMAE1_IRQ)
+				DMAE1_IRQ;
+#else
+				-1;
+#endif
+#endif
+}
+#endif
+
 static int __init sh_dmac_init(void)
 {
 	struct dma_info *info = &sh_dmac_info;
 	int i;
 
 #ifdef CONFIG_CPU_SH4
-	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
-	if (unlikely(i < 0))
-		return i;
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		i = request_irq(get_dma_error_irq(n), dma_err,
+#if defined(CONFIG_SH_DMA_IRQ_MULTI)
+				IRQF_SHARED,
+#else
+				IRQF_DISABLED,
 #endif
+				dmae_name[n], (void *)dmae_name[n]);
+		if (unlikely(i < 0)) {
+			printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
+			return i;
+		}
+	}
+#endif /* CONFIG_CPU_SH4 */
 
 	/*
 	 * Initialize DMAOR, and clean up any error flags that may have
 	 * been set.
 	 */
-	i = dmaor_reset();
+	i = dmaor_reset(0);
 	if (unlikely(i != 0))
 		return i;
+#if defined(CONFIG_CPU_SUBTYPE_SH7723)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7780)	|| \
+		defined(CONFIG_CPU_SUBTYPE_SH7785)
+	i = dmaor_reset(1);
+	if (unlikely(i != 0))
+		return i;
+#endif
 
 	return register_dmac(info);
 }
@@ -284,8 +333,12 @@ static int __init sh_dmac_init(void)
 static void __exit sh_dmac_exit(void)
 {
 #ifdef CONFIG_CPU_SH4
-	free_irq(DMAE_IRQ, 0);
-#endif
+	int n;
+
+	for (n = 0; n < NR_DMAE; n++) {
+		free_irq(get_dma_error_irq(n), (void *)dmae_name[n]);
+	}
+#endif /* CONFIG_CPU_SH4 */
 	unregister_dmac(&sh_dmac_info);
 }
 

arch/sh/drivers/pci/pci-sh7780.c

@@ -127,8 +127,8 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map)
 	pci_write_reg(word, SH4_PCILSR0);
 	pci_write_reg(0x00000001, SH4_PCILSR1);
 	/* Set the values on window 0 PCI config registers */
-	word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000;
-	pci_write_reg(word | 0xa0000000, SH4_PCILAR0);
+	word = CONFIG_MEMORY_START | (CONFIG_MEMORY_SIZE - 0x01000000);
+	pci_write_reg(word, SH4_PCILAR0);
 	pci_write_reg(word, SH7780_PCIMBAR0);
 	/* Set the values on window 1 PCI config registers */
 	pci_write_reg(0x00000000, SH4_PCILAR1);

arch/sh/include/asm/addrspace.h

@@ -31,7 +31,7 @@
 /* Returns the physical address of a PnSEG (n=1,2) address   */
 #define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
 
-#ifdef CONFIG_29BIT
+#if defined(CONFIG_29BIT) || defined(CONFIG_PMB_FIXED)
 /*
  * Map an address to a certain privileged segment
  */
@@ -43,7 +43,7 @@
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
 #define P4SEGADDR(a)	\
 	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
-#endif /* 29BIT */
+#endif /* 29BIT || PMB_FIXED */
 #endif /* P1SEG */
 
 /* Check if an address can be reached in 29 bits */