Commit 92a1aa25 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo

rtlwifi: rtl8723{be,ae}: Remove CamelCase variables

If a macro is in CamelCase, it it converted to upper case. Variables
and routine names are converted to lower case.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 2a83ad1f
......@@ -94,7 +94,7 @@
#define IS_VENDOR_8723A_B_CUT(version) ((IS_8723_SERIES(version))\
? ((GET_CVID_CUT_VERSION(version) == \
B_CUT_VERSION) ? true : false) : false)
#define IS_81xxC_VENDOR_UMC_B_CUT(version) ((IS_CHIP_VENDOR_UMC(version))\
#define IS_81XXC_VENDOR_UMC_B_CUT(version) ((IS_CHIP_VENDOR_UMC(version))\
? ((GET_CVID_CUT_VERSION(version) == \
B_CUT_VERSION) ? true : false) : false)
......
......@@ -676,7 +676,7 @@ static bool _rtl8712e_init_mac(struct ieee80211_hw *hw)
/* HW Power on sequence */
if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_PCI_MSK, Rtl8723_NIC_ENABLE_FLOW))
PWR_INTF_PCI_MSK, RTL8723_NIC_ENABLE_FLOW))
return false;
bytetmp = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_REG+2);
......@@ -966,7 +966,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw)
if (IS_VENDOR_UMC_A_CUT(rtlhal->version)) {
rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1, MASKDWORD, 0x30255);
rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G2, MASKDWORD, 0x50a00);
} else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {
} else if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) {
rtl_set_rfreg(hw, RF90_PATH_A, 0x0C, MASKDWORD, 0x894AE);
rtl_set_rfreg(hw, RF90_PATH_A, 0x0A, MASKDWORD, 0x1AF31);
rtl_set_rfreg(hw, RF90_PATH_A, RF_IPA, MASKDWORD, 0x8F425);
......@@ -1262,7 +1262,7 @@ static void _rtl8723e_poweroff_adapter(struct ieee80211_hw *hw)
/* Combo (PCIe + USB) Card and PCIe-MF Card */
/* 1. Run LPS WL RFOFF flow */
rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_PCI_MSK, Rtl8723_NIC_LPS_ENTER_FLOW);
PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);
/* 2. 0x1F[7:0] = 0 */
/* turn off RF */
......@@ -1282,7 +1282,7 @@ static void _rtl8723e_poweroff_adapter(struct ieee80211_hw *hw)
/* HW card disable configuration. */
rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_PCI_MSK, Rtl8723_NIC_DISABLE_FLOW);
PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);
......
......@@ -883,7 +883,7 @@ static void _rtl8723e_phy_sw_rf_seting(struct ieee80211_hw *hw, u8 channel)
struct rtl_phy *rtlphy = &rtlpriv->phy;
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {
if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) {
if (channel == 6 && rtlphy->current_chan_bw ==
HT_CHANNEL_WIDTH_20)
rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1,
......
......@@ -26,7 +26,7 @@
#define MAX_STALL_TIME 50
#define ANTENNADIVERSITYVALUE 0x80
#define MAX_TXPWR_IDX_NMODE_92S 63
#define Reset_Cnt_Limit 3
#define reset_cnt_limit 3
#define IQK_ADDA_REG_NUM 16
#define IQK_MAC_REG_NUM 4
......
......@@ -305,14 +305,14 @@ extern struct wlan_pwr_cfg rtl8723A_leave_lps_flow
[RTL8723A_TRANS_LPS_TO_ACT_STEPS + RTL8723A_TRANS_END_STEPS];
/* RTL8723 Power Configuration CMDs for PCIe interface */
#define Rtl8723_NIC_PWR_ON_FLOW rtl8723A_power_on_flow
#define Rtl8723_NIC_RF_OFF_FLOW rtl8723A_radio_off_flow
#define Rtl8723_NIC_DISABLE_FLOW rtl8723A_card_disable_flow
#define Rtl8723_NIC_ENABLE_FLOW rtl8723A_card_enable_flow
#define Rtl8723_NIC_SUSPEND_FLOW rtl8723A_suspend_flow
#define Rtl8723_NIC_RESUME_FLOW rtl8723A_resume_flow
#define Rtl8723_NIC_PDN_FLOW rtl8723A_hwpdn_flow
#define Rtl8723_NIC_LPS_ENTER_FLOW rtl8723A_enter_lps_flow
#define Rtl8723_NIC_LPS_LEAVE_FLOW rtl8723A_leave_lps_flow
#define RTL8723_NIC_PWR_ON_FLOW rtl8723A_power_on_flow
#define RTL8723_NIC_RF_OFF_FLOW rtl8723A_radio_off_flow
#define RTL8723_NIC_DISABLE_FLOW rtl8723A_card_disable_flow
#define RTL8723_NIC_ENABLE_FLOW rtl8723A_card_enable_flow
#define RTL8723_NIC_SUSPEND_FLOW rtl8723A_suspend_flow
#define RTL8723_NIC_RESUME_FLOW rtl8723A_resume_flow
#define RTL8723_NIC_PDN_FLOW rtl8723A_hwpdn_flow
#define RTL8723_NIC_LPS_ENTER_FLOW rtl8723A_enter_lps_flow
#define RTL8723_NIC_LPS_LEAVE_FLOW rtl8723A_leave_lps_flow
#endif
......@@ -153,7 +153,7 @@ int rtl8723e_init_sw_vars(struct ieee80211_hw *hw)
return 1;
}
if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version))
if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version))
fw_name = "rtlwifi/rtl8723fw_B.bin";
rtlpriv->max_fw_size = 0x6000;
......
......@@ -297,12 +297,12 @@ void rtl8723be_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
*((enum rf_pwrstate *)(val)) = ppsc->rfpwr_state;
break;
case HW_VAR_FWLPS_RF_ON:{
enum rf_pwrstate rfState;
enum rf_pwrstate rfstate;
u32 val_rcr;
rtlpriv->cfg->ops->get_hw_reg(hw, HW_VAR_RF_STATE,
(u8 *)(&rfState));
if (rfState == ERFOFF) {
(u8 *)(&rfstate));
if (rfstate == ERFOFF) {
*((bool *)(val)) = true;
} else {
val_rcr = rtl_read_dword(rtlpriv, REG_RCR);
......@@ -742,10 +742,10 @@ static bool _rtl8723be_llt_table_init(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
unsigned short i;
u8 txpktbuf_bndy;
u8 maxPage;
u8 maxpage;
bool status;
maxPage = 255;
maxpage = 255;
txpktbuf_bndy = 245;
rtl_write_dword(rtlpriv, REG_TRXFF_BNDY,
......@@ -770,13 +770,13 @@ static bool _rtl8723be_llt_table_init(struct ieee80211_hw *hw)
if (!status)
return status;
for (i = txpktbuf_bndy; i < maxPage; i++) {
for (i = txpktbuf_bndy; i < maxpage; i++) {
status = _rtl8723be_llt_write(hw, i, (i + 1));
if (!status)
return status;
}
status = _rtl8723be_llt_write(hw, maxPage, txpktbuf_bndy);
status = _rtl8723be_llt_write(hw, maxpage, txpktbuf_bndy);
if (!status)
return status;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment