drm/i915/vlv: Reset the ADPA in vlv_display_power_well_init()

While VGA hotplugging worked(ish) before, it looks like that was mainly
because we'd unintentionally enable it in
valleyview_crt_detect_hotplug() when we did a force trigger. This
doesn't work reliably enough because whenever the display powerwell on
vlv gets disabled, the values set in VLV_ADPA get cleared and
consequently VGA hotplugging gets disabled. This causes bugs such as one
we found on an Intel NUC, where doing the following sequence of
hotplugs:

      - Disconnect all monitors
      - Connect VGA
      - Disconnect VGA
      - Connect HDMI

Would result in VGA hotplugging becoming disabled, due to the powerwells
getting toggled in the process of connecting HDMI.

Changes since v3:
 - Expose intel_crt_reset() through intel_drv.h and call that in
   vlv_display_power_well_init() instead of
   encoder->base.funcs->reset(&encoder->base);

Changes since v2:
 - Use intel_encoder structs instead of drm_encoder structs

Changes since v1:
 - Instead of handling the register writes ourself, we just reuse
   intel_crt_detect()
 - Instead of resetting the ADPA during display IRQ installation, we now
   reset them in vlv_display_power_well_init()

Cc: stable@vger.kernel.org
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Rebase over dev_priv/drm_device embedding.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_crt.c

@@ -717,7 +717,7 @@ static int intel_crt_set_property(struct drm_connector *connector,
 	return 0;
 }
 
-static void intel_crt_reset(struct drm_encoder *encoder)
+void intel_crt_reset(struct drm_encoder *encoder)
 {
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);

drivers/gpu/drm/i915/intel_drv.h

@@ -1102,7 +1102,7 @@ void gen8_irq_power_well_pre_disable(struct drm_i915_private *dev_priv,
 
 /* intel_crt.c */
 void intel_crt_init(struct drm_device *dev);
-
+void intel_crt_reset(struct drm_encoder *encoder);
 
 /* intel_ddi.c */
 void intel_ddi_clk_select(struct intel_encoder *encoder,

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -1078,6 +1078,7 @@ static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
 
 static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 {
+	struct intel_encoder *encoder;
 	enum pipe pipe;
 
 	/*
@@ -1113,6 +1114,12 @@ static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
 
 	intel_hpd_init(dev_priv);
 
+	/* Re-enable the ADPA, if we have one */
+	for_each_intel_encoder(&dev_priv->drm, encoder) {
+		if (encoder->type == INTEL_OUTPUT_ANALOG)
+			intel_crt_reset(&encoder->base);
+	}
+
 	i915_redisable_vga_power_on(&dev_priv->drm);
 }