Skip to content

L
linux
Commit 9559f65d authored by Patrick Mochel's avatar Patrick Mochel
Browse files
Options

Merge bk://kernel.bkbits.net//home/mochel/linux-2.5-power 

into osdl.org:/home/mochel/src/kernel/linux-2.5-power
parents 70b812cd 729fe396
Show whitespace changes
Inline Side-by-side
Showing with 772 additions and 1615 deletions
Documentation/i2c/sysfs-interface
View file @ 9559f65d
......@@ -78,6 +78,9 @@ curr_input[1-n] Current input value
Fixed point XXXXX, divide by 1000 to get Amps.
Read only.
eeprom Raw EEPROM data in binary form.
Read only.
fan_min[1-3] Fan minimum value
Integer value indicating RPM
Read/Write.
......
drivers/block/ll_rw_blk.c
View file @ 9559f65d
......@@ -376,6 +376,11 @@ void blk_queue_hardsect_size(request_queue_t *q, unsigned short size)
q->hardsect_size = size;
}
/*
* Returns the minimum that is _not_ zero, unless both are zero.
*/
#define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
/**
* blk_queue_stack_limits - inherit underlying queue limits for stacked drivers
* @t: the stacking driver (top)
......@@ -383,7 +388,9 @@ void blk_queue_hardsect_size(request_queue_t *q, unsigned short size)
**/
void blk_queue_stack_limits(request_queue_t *t, request_queue_t *b)
{
t->max_sectors = min(t->max_sectors,b->max_sectors);
/* zero is "infinity" */
t->max_sectors = min_not_zero(t->max_sectors,b->max_sectors);
t->max_phys_segments = min(t->max_phys_segments,b->max_phys_segments);
t->max_hw_segments = min(t->max_hw_segments,b->max_hw_segments);
t->max_segment_size = min(t->max_segment_size,b->max_segment_size);
......
drivers/i2c/Kconfig
View file @ 9559f65d
......@@ -37,43 +37,7 @@ config I2C_CHARDEV
This support is also available as a module. If so, the module
will be called i2c-dev.
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
depends on I2C
help
This allows you to use a range of I2C adapters called bit-banging
adapters. Say Y if you own an I2C adapter belonging to this class
and then say Y to the specific driver for you adapter below.
This support is also available as a module. If so, the module
will be called i2c-algo-bit.
config I2C_ALGOPCF
tristate "I2C PCF 8584 interfaces"
depends on I2C
help
This allows you to use a range of I2C adapters called PCF adapters.
Say Y if you own an I2C adapter belonging to this class and then say
Y to the specific driver for you adapter below.
This support is also available as a module. If so, the module
will be called i2c-algo-pcf.
config I2C_ALGOITE
tristate "ITE I2C Algorithm"
depends on MIPS_ITE8172 && I2C
help
This supports the use of the ITE8172 I2C interface found on some MIPS
systems. Say Y if you have one of these. You should also say Y for
the ITE I2C peripheral driver support below.
This support is also available as a module. If so, the module
will be called i2c-algo-ite.
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
source drivers/i2c/algos/Kconfig
source drivers/i2c/busses/Kconfig
source drivers/i2c/chips/Kconfig
......
drivers/i2c/Makefile
View file @ 9559f65d
......@@ -5,7 +5,4 @@
obj-$(CONFIG_I2C) += i2c-core.o
obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
obj-$(CONFIG_I2C_SENSOR) += i2c-sensor.o
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
obj-y += busses/ chips/
obj-y += busses/ chips/ algos/
drivers/i2c/algos/Kconfig 0 → 100644
View file @ 9559f65d
#
# Character device configuration
#
menu "I2C Algorithms"
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
depends on I2C
help
This allows you to use a range of I2C adapters called bit-banging
adapters. Say Y if you own an I2C adapter belonging to this class
and then say Y to the specific driver for you adapter below.
This support is also available as a module. If so, the module
will be called i2c-algo-bit.
config I2C_ALGOPCF
tristate "I2C PCF 8584 interfaces"
depends on I2C
help
This allows you to use a range of I2C adapters called PCF adapters.
Say Y if you own an I2C adapter belonging to this class and then say
Y to the specific driver for you adapter below.
This support is also available as a module. If so, the module
will be called i2c-algo-pcf.
config I2C_ALGOITE
tristate "ITE I2C Algorithm"
depends on MIPS_ITE8172 && I2C
help
This supports the use of the ITE8172 I2C interface found on some MIPS
systems. Say Y if you have one of these. You should also say Y for
the ITE I2C peripheral driver support below.
This support is also available as a module. If so, the module
will be called i2c-algo-ite.
config I2C_ALGO8XX
tristate "MPC8xx CPM I2C interface"
depends on 8xx && I2C
endmenu
drivers/i2c/algos/Makefile 0 → 100644
View file @ 9559f65d
#
# Makefile for the i2c algorithms
#
obj-$(CONFIG_I2C_ALGOBIT) += i2c-algo-bit.o
obj-$(CONFIG_I2C_ALGOPCF) += i2c-algo-pcf.o
obj-$(CONFIG_I2C_ALGOITE) += i2c-algo-ite.o
drivers/i2c/i2c-algo-ite.c → drivers/i2c/algos/i2c-algo-ite.c
View file @ 9559f65d
......@@ -46,7 +46,7 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-ite.h>
#include "i2c-ite.h"
#include "i2c-algo-ite.h"
#define PM_DSR IT8172_PCI_IO_BASE + IT_PM_DSR
#define PM_IBSR IT8172_PCI_IO_BASE + IT_PM_DSR + 0x04
......
drivers/i2c/i2c-algo-pcf.c → drivers/i2c/algos/i2c-algo-pcf.c
View file @ 9559f65d
......@@ -37,7 +37,7 @@
#include <linux/errno.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pcf.h>
#include "i2c-pcf8584.h"
#include "i2c-algo-pcf.h"
/* ----- global defines ----------------------------------------------- */
......
drivers/i2c/busses/i2c-elektor.c
View file @ 9559f65d
......@@ -41,7 +41,7 @@
#include <asm/io.h>
#include <asm/irq.h>
#include "../i2c-pcf8584.h"
#include "../algos/i2c-algo-pcf.h"
#define DEFAULT_BASE 0x330
......
drivers/i2c/chips/Kconfig
View file @ 9559f65d
......@@ -21,6 +21,18 @@ config SENSORS_ADM1021
This driver can also be built as a module. If so, the module
will be called adm1021.
config SENSORS_EEPROM
tristate "EEPROM (DIMM) reader"
depends on I2C && EXPERIMENTAL
select I2C_SENSOR
help
If you say yes here you get read-only access to the EEPROM data
available on modern memory DIMMs, and which could theoretically
also be available on other devices.
This driver can also be built as a module. If so, the module
will be called eeprom.
config SENSORS_IT87
tristate "National Semiconductors IT87 and compatibles"
depends on I2C && EXPERIMENTAL
......
drivers/i2c/chips/Makefile
View file @ 9559f65d
......@@ -6,6 +6,7 @@
obj-$(CONFIG_SENSORS_W83781D) += w83781d.o
obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_LM75) += lm75.o
obj-$(CONFIG_SENSORS_LM78) += lm78.o
......
drivers/i2c/chips/eeprom.c 0 → 100644
View file @ 9559f65d
/*
eeprom.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
Philip Edelbrock <phil@netroedge.com>
Copyright (C) 2003 Greg Kroah-Hartman <greg@kroah.com>
Copyright (C) 2003 IBM Corp.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* #define DEBUG */
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/i2c-sensor.h>
/* Addresses to scan */
static unsigned short normal_i2c[] = { I2C_CLIENT_END };
static unsigned short normal_i2c_range[] = { 0x50, 0x57, I2C_CLIENT_END };
static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
/* Insmod parameters */
SENSORS_INSMOD_1(eeprom);
static int checksum = 0;
MODULE_PARM(checksum, "i");
MODULE_PARM_DESC(checksum, "Only accept eeproms whose checksum is correct");
/* EEPROM registers */
#define EEPROM_REG_CHECKSUM 0x3f
/* Size of EEPROM in bytes */
#define EEPROM_SIZE 256
/* possible types of eeprom devices */
enum eeprom_nature {
UNKNOWN,
VAIO,
};
/* Each client has this additional data */
struct eeprom_data {
struct semaphore update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 data[EEPROM_SIZE]; /* Register values */
};
static int eeprom_attach_adapter(struct i2c_adapter *adapter);
static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
static int eeprom_detach_client(struct i2c_client *client);
/* This is the driver that will be inserted */
static struct i2c_driver eeprom_driver = {
.owner = THIS_MODULE,
.name = "eeprom",
.id = I2C_DRIVERID_EEPROM,
.flags = I2C_DF_NOTIFY,
.attach_adapter = eeprom_attach_adapter,
.detach_client = eeprom_detach_client,
};
static int eeprom_id = 0;
static void eeprom_update_client(struct i2c_client *client)
{
struct eeprom_data *data = i2c_get_clientdata(client);
int i, j;
down(&data->update_lock);
if ((jiffies - data->last_updated > 300 * HZ) |
(jiffies < data->last_updated) || !data->valid) {
dev_dbg(&client->dev, "Starting eeprom update\n");
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
for (i=0; i < EEPROM_SIZE; i += I2C_SMBUS_I2C_BLOCK_MAX)
if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_I2C_BLOCK_MAX)
goto exit;
} else {
if (i2c_smbus_write_byte(client, 0)) {
dev_dbg(&client->dev, "eeprom read start has failed!\n");
goto exit;
}
for (i = 0; i < EEPROM_SIZE; i++) {
j = i2c_smbus_read_byte(client);
if (j < 0)
goto exit;
data->data[i] = (u8) j;
}
}
data->last_updated = jiffies;
data->valid = 1;
}
exit:
up(&data->update_lock);
}
static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
{
struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
struct eeprom_data *data = i2c_get_clientdata(client);
eeprom_update_client(client);
if (off > EEPROM_SIZE)
return 0;
if (off + count > EEPROM_SIZE)
count = EEPROM_SIZE - off;
memcpy(buf, &data->data[off], count);
return count;
}
static struct bin_attribute eeprom_attr = {
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
},
.size = EEPROM_SIZE,
.read = eeprom_read,
};
static int eeprom_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_detect(adapter, &addr_data, eeprom_detect);
}
/* This function is called by i2c_detect */
int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
{
int i, cs;
struct i2c_client *new_client;
struct eeprom_data *data;
enum eeprom_nature nature = UNKNOWN;
int err = 0;
/* Make sure we aren't probing the ISA bus!! This is just a safety check
at this moment; i2c_detect really won't call us. */
#ifdef DEBUG
if (i2c_is_isa_adapter(adapter)) {
dev_dbg(&adapter->dev, " eeprom_detect called for an ISA bus adapter?!?\n");
return 0;
}
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
goto exit;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access eeprom_{read,write}_value. */
if (!(new_client = kmalloc(sizeof(struct i2c_client) +
sizeof(struct eeprom_data),
GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
}
memset(new_client, 0x00, sizeof(struct i2c_client) +
sizeof(struct eeprom_data));
data = (struct eeprom_data *) (new_client + 1);
memset(data, 0xff, EEPROM_SIZE);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
new_client->driver = &eeprom_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. It is not there, unless you force
the checksum to work out. */
if (checksum) {
/* prevent 24RF08 corruption */
i2c_smbus_write_quick(new_client, 0);
cs = 0;
for (i = 0; i <= 0x3e; i++)
cs += i2c_smbus_read_byte_data(new_client, i);
cs &= 0xff;
if (i2c_smbus_read_byte_data (new_client, EEPROM_REG_CHECKSUM) != cs)
goto exit_kfree;
}
/* Detect the Vaio nature of EEPROMs.
We use the "PCG-" prefix as the signature. */
if (address == 0x57) {
if (i2c_smbus_read_byte_data(new_client, 0x80) == 'P' &&
i2c_smbus_read_byte_data(new_client, 0x81) == 'C' &&
i2c_smbus_read_byte_data(new_client, 0x82) == 'G' &&
i2c_smbus_read_byte_data(new_client, 0x83) == '-')
nature = VAIO;
}
/* If this is a VIAO, then we only allow root to read from this file,
as BIOS passwords can be present here in plaintext */
switch (nature) {
case VAIO:
eeprom_attr.attr.mode = S_IRUSR;
break;
default:
eeprom_attr.attr.mode = S_IRUGO;
}
/* Fill in the remaining client fields */
strncpy(new_client->name, "eeprom", I2C_NAME_SIZE);
new_client->id = eeprom_id++;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto exit_kfree;
/* create the sysfs eeprom file */
sysfs_create_bin_file(&new_client->dev.kobj, &eeprom_attr);
return 0;
exit_kfree:
kfree(new_client);
exit:
return err;
}
static int eeprom_detach_client(struct i2c_client *client)
{
int err;
err = i2c_detach_client(client);
if (err) {
dev_err(&client->dev, "Client deregistration failed, client not detached.\n");
return err;
}
kfree(client);
return 0;
}
static int __init eeprom_init(void)
{
return i2c_add_driver(&eeprom_driver);
}
static void __exit eeprom_exit(void)
{
i2c_del_driver(&eeprom_driver);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and "
"Philip Edelbrock <phil@netroedge.com> and "
"Greg Kroah-Hartman <greg@kroah.com>");
MODULE_DESCRIPTION("I2C EEPROM driver");
MODULE_LICENSE("GPL");
module_init(eeprom_init);
module_exit(eeprom_exit);
drivers/i2c/i2c-sensor.c
View file @ 9559f65d
......@@ -50,10 +50,7 @@ int i2c_detect(struct i2c_adapter *adapter,
return -1;
for (addr = 0x00; addr <= (is_isa ? 0xffff : 0x7f); addr++) {
void *region_used = request_region(addr, 1, "foo");
release_region(addr, 1);
if ((is_isa && (region_used == NULL)) ||
(!is_isa && i2c_check_addr(adapter, addr)))
if (!is_isa && i2c_check_addr(adapter, addr))
continue;
/* If it is in one of the force entries, we don't do any
......
drivers/usb/Makefile
View file @ 9559f65d
......@@ -35,7 +35,6 @@ obj-$(CONFIG_USB_SE401) += media/
obj-$(CONFIG_USB_STV680) += media/
obj-$(CONFIG_USB_VICAM) += media/
obj-$(CONFIG_USB_AX8817X) += net/
obj-$(CONFIG_USB_CATC) += net/
obj-$(CONFIG_USB_KAWETH) += net/
obj-$(CONFIG_USB_PEGASUS) += net/
......
drivers/usb/Makefile.lib
View file @ 9559f65d
obj-$(CONFIG_USB_AX8817X) += crc32.o
obj-$(CONFIG_USB_CATC) += crc32.o
obj-$(CONFIG_USB_SPEEDTOUCH) += crc32.o
obj-$(CONFIG_USB_USBNET) += crc32.o
drivers/usb/class/usb-midi.c
View file @ 9559f65d
......@@ -1750,7 +1750,7 @@ static int alloc_usb_midi_device( struct usb_device *d, struct usb_midi_state *s
return 0;
error_end:
if ( mdevs != NULL && devices > 0 ) {
if ( mdevs != NULL ) {
for ( i=0 ; i<devices ; i++ ) {
if ( mdevs[i] != NULL ) {
unregister_sound_midi( mdevs[i]->dev_midi );
......
drivers/usb/core/config.c
View file @ 9559f65d
......@@ -237,9 +237,6 @@ int usb_parse_configuration(struct usb_host_config *config, char *buffer, int si
memset(interface, 0, sizeof(struct usb_interface));
interface->dev.release = usb_release_intf;
device_initialize(&interface->dev);
/* put happens in usb_destroy_configuration */
get_device(&interface->dev);
}
/* Go through the descriptors, checking their length and counting the
......
drivers/usb/core/driverfs.c
View file @ 9559f65d
......@@ -23,22 +23,44 @@
#include "usb.h"
/* Active configuration fields */
#define usb_actconfig_attr(field, format_string) \
#define usb_actconfig_show(field, format_string) \
static ssize_t \
show_##field (struct device *dev, char *buf) \
{ \
struct usb_device *udev; \
\
udev = to_usb_device (dev); \
if (udev->actconfig) \
return sprintf (buf, format_string, udev->actconfig->desc.field); \
else return 0; \
} \
#define usb_actconfig_attr(field, format_string) \
usb_actconfig_show(field,format_string) \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
usb_actconfig_attr (bNumInterfaces, "%2d\n")
usb_actconfig_attr (bConfigurationValue, "%2d\n")
usb_actconfig_attr (bmAttributes, "%2x\n")
usb_actconfig_attr (bMaxPower, "%3dmA\n")
/* configuration value is always present, and r/w */
usb_actconfig_show(bConfigurationValue,"%u\n");
static ssize_t
set_bConfigurationValue (struct device *dev, const char *buf, size_t count)
{
struct usb_device *udev = udev = to_usb_device (dev);
int config, value;
if (sscanf (buf, "%u", &config) != 1 || config > 255)
return -EINVAL;
value = usb_set_configuration (udev, config);
return (value < 0) ? value : count;
}
static DEVICE_ATTR(bConfigurationValue, S_IRUGO | S_IWUSR,
show_bConfigurationValue, set_bConfigurationValue);
/* String fields */
static ssize_t show_product (struct device *dev, char *buf)
{
......
drivers/usb/core/hcd-pci.c
View file @ 9559f65d
......@@ -273,17 +273,17 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state)
int retval = 0;
hcd = pci_get_drvdata(dev);
dev_dbg (hcd->controller, "suspend D%d --> D%d\n",
dev->current_state, state);
switch (hcd->state) {
case USB_STATE_HALT:
dev_dbg (hcd->controller, "halted; hcd not suspended\n");
break;
case USB_STATE_SUSPENDED:
dev_dbg (hcd->controller, "suspend D%d --> D%d\n",
dev->current_state, state);
dev_dbg (hcd->controller, "hcd already suspended\n");
break;
default:
dev_dbg (hcd->controller, "suspend to state %d\n", state);
/* remote wakeup needs hub->suspend() cooperation */
// pci_enable_wake (dev, 3, 1);
......@@ -292,6 +292,9 @@ int usb_hcd_pci_suspend (struct pci_dev *dev, u32 state)
/* driver may want to disable DMA etc */
hcd->state = USB_STATE_QUIESCING;
retval = hcd->driver->suspend (hcd, state);
if (retval)
dev_dbg (hcd->controller, "suspend fail, retval %d\n",
retval);
}
pci_set_power_state (dev, state);
......@@ -311,6 +314,9 @@ int usb_hcd_pci_resume (struct pci_dev *dev)
int retval;
hcd = pci_get_drvdata(dev);
dev_dbg (hcd->controller, "resume from state D%d\n",
dev->current_state);
if (hcd->state != USB_STATE_SUSPENDED) {
dev_dbg (hcd->controller, "can't resume, not suspended!\n");
return -EL3HLT;
......
drivers/usb/core/message.c
View file @ 9559f65d
......@@ -781,18 +781,40 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf)
* @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
*
* Disables all the device's endpoints, potentially including endpoint 0.
* Deallocates hcd/hardware state for the endpoints ... and nukes all
* pending urbs.
* Deallocates hcd/hardware state for the endpoints (nuking all or most
* pending urbs) and usbcore state for the interfaces, so that usbcore
* must usb_set_configuration() before any interfaces could be used.
*/
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
int i;
dbg("nuking URBs for device %s", dev->dev.bus_id);
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __FUNCTION__,
skip_ep0 ? "non-ep0" : "all");
for (i = skip_ep0; i < 16; ++i) {
usb_disable_endpoint(dev, i);
usb_disable_endpoint(dev, i + USB_DIR_IN);
}
dev->toggle[0] = dev->toggle[1] = 0;
dev->halted[0] = dev->halted[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
*/
if (dev->actconfig) {
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *interface;
/* remove this interface */
interface = dev->actconfig->interface[i];
dev_dbg (&dev->dev, "unregistering interface %s\n",
interface->dev.bus_id);
device_del(&interface->dev);
}
dev->actconfig = 0;
if (dev->state == USB_STATE_CONFIGURED)
dev->state = USB_STATE_ADDRESS;
}
}
......@@ -979,6 +1001,9 @@ int usb_reset_configuration(struct usb_device *dev)
int i, retval;
struct usb_host_config *config;
/* dev->serialize guards all config changes */
down(&dev->serialize);
for (i = 1; i < 16; ++i) {
usb_disable_endpoint(dev, i);
usb_disable_endpoint(dev, i + USB_DIR_IN);
......@@ -989,8 +1014,10 @@ int usb_reset_configuration(struct usb_device *dev)
USB_REQ_SET_CONFIGURATION, 0,
config->desc.bConfigurationValue, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
if (retval < 0)
return retval;
if (retval < 0) {
dev->state = USB_STATE_ADDRESS;
goto done;
}
dev->toggle[0] = dev->toggle[1] = 0;
dev->halted[0] = dev->halted[1] = 0;
......@@ -1002,7 +1029,9 @@ int usb_reset_configuration(struct usb_device *dev)
intf->act_altsetting = 0;
usb_enable_interface(dev, intf);
}
return 0;
done:
up(&dev->serialize);
return (retval < 0) ? retval : 0;
}
/**
......@@ -1012,72 +1041,105 @@ int usb_reset_configuration(struct usb_device *dev)
* Context: !in_interrupt ()
*
* This is used to enable non-default device modes. Not all devices
* support this kind of configurability. By default, configuration
* zero is selected after enumeration; many devices only have a single
* use this kind of configurability; many devices only have one
* configuration.
*
* USB devices may support one or more configurations, which affect
* USB device configurations may affect Linux interoperability,
* power consumption and the functionality available. For example,
* the default configuration is limited to using 100mA of bus power,
* so that when certain device functionality requires more power,
* and the device is bus powered, that functionality will be in some
* and the device is bus powered, that functionality should be in some
* non-default device configuration. Other device modes may also be
* reflected as configuration options, such as whether two ISDN
* channels are presented as independent 64Kb/s interfaces or as one
* bonded 128Kb/s interface.
* channels are available independently; and choosing between open
* standard device protocols (like CDC) or proprietary ones.
*
* Note that USB has an additional level of device configurability,
* associated with interfaces. That configurability is accessed using
* usb_set_interface().
*
* This call is synchronous, and may not be used in an interrupt context.
* This call is synchronous. The calling context must be able to sleep,
* and must not hold the driver model lock for USB; usb device driver
* probe() methods may not use this routine.
*
* Returns zero on success, or else the status code returned by the
* underlying usb_control_msg() call.
* underlying call that failed. On succesful completion, each interface
* in the original device configuration has been destroyed, and each one
* in the new configuration has been probed by all relevant usb device
* drivers currently known to the kernel.
*/
int usb_set_configuration(struct usb_device *dev, int configuration)
{
int i, ret;
struct usb_host_config *cp = NULL;
/* dev->serialize guards all config changes */
down(&dev->serialize);
for (i=0; i<dev->descriptor.bNumConfigurations; i++) {
if (dev->config[i].desc.bConfigurationValue == configuration) {
cp = &dev->config[i];
break;
}
}
if ((!cp && configuration != 0) || (cp && configuration == 0)) {
warn("selecting invalid configuration %d", configuration);
return -EINVAL;
if ((!cp && configuration != 0)) {
ret = -EINVAL;
goto out;
}
if (cp && configuration == 0)
dev_warn(&dev->dev, "config 0 descriptor??\n");
/* if it's already configured, clear out old state first. */
/* if it's already configured, clear out old state first.
* getting rid of old interfaces means unbinding their drivers.
*/
if (dev->state != USB_STATE_ADDRESS)
usb_disable_device (dev, 1); // Skip ep0
dev->toggle[0] = dev->toggle[1] = 0;
dev->halted[0] = dev->halted[1] = 0;
dev->state = USB_STATE_ADDRESS;
if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT)) < 0)
return ret;
if (configuration)
dev->state = USB_STATE_CONFIGURED;
goto out;
dev->actconfig = cp;
if (!configuration)
dev->state = USB_STATE_ADDRESS;
else {
dev->state = USB_STATE_CONFIGURED;
/* reset more hc/hcd interface/endpoint state */
/* re-initialize hc/hcd/usbcore interface/endpoint state.
* this triggers binding of drivers to interfaces; and
* maybe probe() calls will choose different altsettings.
*/
for (i = 0; i < cp->desc.bNumInterfaces; ++i) {
struct usb_interface *intf = cp->interface[i];
struct usb_interface_descriptor *desc;
intf->act_altsetting = 0;
desc = &intf->altsetting [0].desc;
usb_enable_interface(dev, intf);
intf->dev.parent = &dev->dev;
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
intf->dev.dma_mask = dev->dev.dma_mask;
sprintf (&intf->dev.bus_id[0], "%d-%s:%d.%d",
dev->bus->busnum, dev->devpath,
configuration,
desc->bInterfaceNumber);
dev_dbg (&dev->dev,
"registering %s (config #%d, interface %d)\n",
intf->dev.bus_id, configuration,
desc->bInterfaceNumber);
device_add (&intf->dev);
usb_create_driverfs_intf_files (intf);
}
}
return 0;
out:
up(&dev->serialize);
return ret;
}
/**
* usb_string - returns ISO 8859-1 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
......
drivers/usb/core/usb.c
View file @ 9559f65d
......@@ -898,6 +898,7 @@ void usb_disconnect(struct usb_device **pdev)
* this device will fail.
*/
dev->state = USB_STATE_NOTATTACHED;
down(&dev->serialize);
dev_info (&dev->dev, "USB disconnect, address %d\n", dev->devnum);
......@@ -908,32 +909,19 @@ void usb_disconnect(struct usb_device **pdev)
usb_disconnect(child);
}
/* deallocate hcd/hardware state ... and nuke all pending urbs */
/* deallocate hcd/hardware state ... nuking all pending urbs and
* cleaning up all state associated with the current configuration
*/
usb_disable_device(dev, 0);
/* disconnect() drivers from interfaces (a key side effect) */
dev_dbg (&dev->dev, "unregistering interfaces\n");
if (dev->actconfig) {
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *interface;
/* remove this interface */
interface = dev->actconfig->interface[i];
device_unregister(&interface->dev);
}
}
dev_dbg (&dev->dev, "unregistering device\n");
/* Free the device number and remove the /proc/bus/usb entry */
if (dev->devnum > 0) {
clear_bit(dev->devnum, dev->bus->devmap.devicemap);
usbfs_remove_device(dev);
}
up(&dev->serialize);
device_unregister(&dev->dev);
/* Decrement the reference count, it'll auto free everything when */
/* it hits 0 which could very well be now */
usb_put_dev(dev);
}
/**
......@@ -1017,7 +1005,6 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
dev->dev.driver = &usb_generic_driver;
dev->dev.bus = &usb_bus_type;
dev->dev.driver_data = &usb_generic_driver_data;
usb_get_dev(dev);
if (dev->dev.bus_id[0] == 0)
sprintf (&dev->dev.bus_id[0], "%d-%s",
dev->bus->busnum, dev->devpath);
......@@ -1090,27 +1077,12 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
err = usb_get_configuration(dev);
if (err < 0) {
dev_err(&dev->dev, "unable to get device %d configuration (error=%d)\n",
dev->devnum, err);
dev_err(&dev->dev, "can't read configurations, error %d\n",
err);
goto fail;
}
/* choose and set the configuration here */
if (dev->descriptor.bNumConfigurations != 1) {
dev_info(&dev->dev,
"configuration #%d chosen from %d choices\n",
dev->config[0].desc.bConfigurationValue,
dev->descriptor.bNumConfigurations);
}
err = usb_set_configuration(dev, dev->config[0].desc.bConfigurationValue);
if (err) {
dev_err(&dev->dev, "failed to set device %d default configuration (error=%d)\n",
dev->devnum, err);
goto fail;
}
/* USB device state == configured ... tell the world! */
/* Tell the world! */
dev_dbg(&dev->dev, "new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
dev->descriptor.iManufacturer, dev->descriptor.iProduct, dev->descriptor.iSerialNumber);
......@@ -1123,30 +1095,32 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
usb_show_string(dev, "SerialNumber", dev->descriptor.iSerialNumber);
#endif
/* put into sysfs, with device and config specific files */
/* put device-specific files into sysfs */
err = device_add (&dev->dev);
if (err)
if (err) {
dev_err(&dev->dev, "can't device_add, error %d\n", err);
goto fail;
}
usb_create_driverfs_dev_files (dev);
/* Register all of the interfaces for this device with the driver core.
* Remember, interfaces get bound to drivers, not devices. */
for (i = 0; i < dev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *interface = dev->actconfig->interface[i];
struct usb_interface_descriptor *desc;
desc = &interface->altsetting [interface->act_altsetting].desc;
interface->dev.parent = &dev->dev;
interface->dev.driver = NULL;
interface->dev.bus = &usb_bus_type;
interface->dev.dma_mask = parent->dma_mask;
sprintf (&interface->dev.bus_id[0], "%d-%s:%d",
dev->bus->busnum, dev->devpath,
desc->bInterfaceNumber);
dev_dbg (&dev->dev, "%s - registering interface %s\n", __FUNCTION__, interface->dev.bus_id);
device_add (&interface->dev);
usb_create_driverfs_intf_files (interface);
/* choose and set the configuration. that registers the interfaces
* with the driver core, and lets usb device drivers bind to them.
*/
if (dev->descriptor.bNumConfigurations != 1) {
dev_info(&dev->dev,
"configuration #%d chosen from %d choices\n",
dev->config[0].desc.bConfigurationValue,
dev->descriptor.bNumConfigurations);
}
err = usb_set_configuration(dev,
dev->config[0].desc.bConfigurationValue);
if (err) {
dev_err(&dev->dev, "can't set config #%d, error %d\n",
dev->config[0].desc.bConfigurationValue, err);
goto fail;
}
/* USB device state == configured ... usable */
/* add a /proc/bus/usb entry */
usbfs_add_device(dev);
......@@ -1156,7 +1130,6 @@ int usb_new_device(struct usb_device *dev, struct device *parent)
dev->state = USB_STATE_DEFAULT;
clear_bit(dev->devnum, dev->bus->devmap.devicemap);
dev->devnum = -1;
usb_put_dev(dev);
return err;
}
......
drivers/usb/gadget/ether.c
View file @ 9559f65d
......@@ -93,6 +93,7 @@ struct eth_dev {
struct usb_ep *in_ep, *out_ep, *status_ep;
const struct usb_endpoint_descriptor
*in, *out, *status;
struct list_head tx_reqs, rx_reqs;
struct net_device *net;
struct net_device_stats stats;
......@@ -103,28 +104,6 @@ struct eth_dev {
#define WORK_RX_MEMORY 0
};
/*-------------------------------------------------------------------------*/
/* This driver keeps a variable number of requests queued, more at
* high speeds. (Numbers are just educated guesses, untuned.)
* Shrink the queue if memory is tight, or make it bigger to
* handle bigger traffic bursts between IRQs.
*/
static unsigned qmult = 4;
#define HS_FACTOR 5
#define qlen(gadget) \
(qmult*((gadget->speed == USB_SPEED_HIGH) ? HS_FACTOR : 1))
/* defer IRQs on highspeed TX */
#define TX_DELAY 8
module_param (qmult, uint, S_IRUGO|S_IWUSR);
/*-------------------------------------------------------------------------*/
/* Thanks to NetChip Technologies for donating this product ID.
......@@ -175,6 +154,7 @@ module_param (qmult, uint, S_IRUGO|S_IWUSR);
*/
#ifdef CONFIG_USB_ETH_NET2280
#define CHIP "net2280"
#define DEFAULT_QLEN 4 /* has dma chaining */
#define DRIVER_VERSION_NUM 0x0101
#define EP0_MAXPACKET 64
static const char EP_OUT_NAME [] = "ep-a";
......@@ -220,7 +200,7 @@ static const char EP_IN_NAME [] = "ep1in-bulk";
/* supports remote wakeup, but this driver doesn't */
/* no hw optimizations to apply */
#define hw_optimize(g) do {} while (0);
#define hw_optimize(g) do {} while (0)
#endif
/*
......@@ -243,7 +223,7 @@ static const char EP_IN_NAME [] = "ep2in-bulk";
/* doesn't support remote wakeup? */
/* no hw optimizations to apply */
#define hw_optimize(g) do {} while (0);
#define hw_optimize(g) do {} while (0)
#endif
/*-------------------------------------------------------------------------*/
......@@ -299,11 +279,34 @@ static const char EP_IN_NAME [] = "ep2in-bulk";
/* else value must be USB_CONFIG_ATT_WAKEUP */
#endif
/*-------------------------------------------------------------------------*/
#ifndef DEFAULT_QLEN
#define DEFAULT_QLEN 2 /* double buffering by default */
#endif
#ifdef HIGHSPEED
static unsigned qmult = 5;
module_param (qmult, uint, S_IRUGO|S_IWUSR);
/* for dual-speed hardware, use deeper queues at highspeed */
#define qlen(gadget) \
(DEFAULT_QLEN*((gadget->speed == USB_SPEED_HIGH) ? qmult : 1))
/* also defer IRQs on highspeed TX */
#define TX_DELAY DEFAULT_QLEN
#else /* !HIGHSPEED ... full speed: */
#define qlen(gadget) DEFAULT_QLEN
#endif
/*-------------------------------------------------------------------------*/
#define xprintk(d,level,fmt,args...) \
printk(level "%s %s: " fmt , shortname , (d)->gadget->dev.bus_id , \
## args)
printk(level "%s: " fmt , (d)->net->name , ## args)
#ifdef DEBUG
#undef DEBUG
......@@ -763,6 +766,7 @@ config_buf (enum usb_device_speed speed, u8 *buf, u8 type, unsigned index)
/*-------------------------------------------------------------------------*/
static void eth_start (struct eth_dev *dev, int gfp_flags);
static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags);
static int
set_ether_config (struct eth_dev *dev, int gfp_flags)
......@@ -852,11 +856,21 @@ set_ether_config (struct eth_dev *dev, int gfp_flags)
if (!result && (!dev->in_ep || !dev->out_ep))
result = -ENODEV;
if (result == 0)
result = alloc_requests (dev, qlen (gadget), gfp_flags);
#ifndef DEV_CONFIG_CDC
if (result == 0) {
netif_carrier_on (dev->net);
if (netif_running (dev->net))
eth_start (dev, GFP_ATOMIC);
} else {
(void) usb_ep_disable (dev->in_ep);
dev->in_ep = 0;
dev->in = 0;
(void) usb_ep_disable (dev->out_ep);
dev->out_ep = 0;
dev->out = 0;
}
#endif /* !CONFIG_CDC_ETHER */
......@@ -869,6 +883,8 @@ set_ether_config (struct eth_dev *dev, int gfp_flags)
static void eth_reset_config (struct eth_dev *dev)
{
struct usb_request *req;
if (dev->config == 0)
return;
......@@ -877,17 +893,30 @@ static void eth_reset_config (struct eth_dev *dev)
netif_stop_queue (dev->net);
netif_carrier_off (dev->net);
/* just disable endpoints, forcing completion of pending i/o.
* all our completion handlers free their requests in this case.
/* disable endpoints, forcing (synchronous) completion of
* pending i/o. then free the requests.
*/
if (dev->in_ep) {
usb_ep_disable (dev->in_ep);
while (likely (!list_empty (&dev->tx_reqs))) {
req = container_of (dev->tx_reqs.next,
struct usb_request, list);
list_del (&req->list);
usb_ep_free_request (dev->in_ep, req);
}
dev->in_ep = 0;
}
if (dev->out_ep) {
usb_ep_disable (dev->out_ep);
while (likely (!list_empty (&dev->rx_reqs))) {
req = container_of (dev->rx_reqs.next,
struct usb_request, list);
list_del (&req->list);
usb_ep_free_request (dev->out_ep, req);
}
dev->out_ep = 0;
}
#ifdef EP_STATUS_NUM
if (dev->status_ep) {
usb_ep_disable (dev->status_ep);
......@@ -1345,7 +1374,8 @@ static int eth_ioctl (struct net_device *net, struct ifreq *rq, int cmd)
static void defer_kevent (struct eth_dev *dev, int flag)
{
set_bit (flag, &dev->todo);
if (test_and_set_bit (flag, &dev->todo))
return;
if (!schedule_work (&dev->work))
ERROR (dev, "kevent %d may have been dropped\n", flag);
else
......@@ -1366,7 +1396,7 @@ rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags)
if ((skb = alloc_skb (size, gfp_flags)) == 0) {
DEBUG (dev, "no rx skb\n");
defer_kevent (dev, WORK_RX_MEMORY);
usb_ep_free_request (dev->out_ep, req);
list_add (&req->list, &dev->rx_reqs);
return -ENOMEM;
}
......@@ -1381,7 +1411,7 @@ rx_submit (struct eth_dev *dev, struct usb_request *req, int gfp_flags)
if (retval) {
DEBUG (dev, "rx submit --> %d\n", retval);
dev_kfree_skb_any (skb);
usb_ep_free_request (dev->out_ep, req);
list_add (&req->list, &dev->rx_reqs);
}
return retval;
}
......@@ -1421,6 +1451,14 @@ static void rx_complete (struct usb_ep *ep, struct usb_request *req)
case -ECONNRESET: // unlink
case -ESHUTDOWN: // disconnect etc
VDEBUG (dev, "rx shutdown, code %d\n", status);
goto quiesce;
/* for hardware automagic (such as pxa) */
case -ECONNABORTED: // endpoint reset
DEBUG (dev, "rx %s reset\n", ep->name);
defer_kevent (dev, WORK_RX_MEMORY);
quiesce:
dev_kfree_skb_any (skb);
goto clean;
/* data overrun */
......@@ -1438,28 +1476,96 @@ static void rx_complete (struct usb_ep *ep, struct usb_request *req)
dev_kfree_skb_any (skb);
if (!netif_running (dev->net)) {
clean:
usb_ep_free_request (dev->out_ep, req);
list_add (&req->list, &dev->rx_reqs);
req = 0;
}
if (req)
rx_submit (dev, req, GFP_ATOMIC);
}
static int prealloc (struct list_head *list, struct usb_ep *ep,
unsigned n, int gfp_flags)
{
unsigned i;
struct usb_request *req;
if (!n)
return -ENOMEM;
/* queue/recycle up to N requests */
i = n;
list_for_each_entry (req, list, list) {
if (i-- == 0)
goto extra;
}
while (i--) {
req = usb_ep_alloc_request (ep, gfp_flags);
if (!req)
return list_empty (list) ? -ENOMEM : 0;
list_add (&req->list, list);
}
return 0;
extra:
/* free extras */
for (;;) {
struct list_head *next;
next = req->list.next;
list_del (&req->list);
usb_ep_free_request (ep, req);
if (next == list)
break;
req = container_of (next, struct usb_request, list);
}
return 0;
}
static int alloc_requests (struct eth_dev *dev, unsigned n, int gfp_flags)
{
int status;
status = prealloc (&dev->tx_reqs, dev->in_ep, n, gfp_flags);
if (status < 0)
goto fail;
status = prealloc (&dev->rx_reqs, dev->out_ep, n, gfp_flags);
if (status < 0)
goto fail;
return 0;
fail:
DEBUG (dev, "can't alloc requests\n");
return status;
}
static void rx_fill (struct eth_dev *dev, int gfp_flags)
{
struct usb_request *req;
clear_bit (WORK_RX_MEMORY, &dev->todo);
/* fill unused rxq slots with some skb */
while (!list_empty (&dev->rx_reqs)) {
req = container_of (dev->rx_reqs.next,
struct usb_request, list);
list_del_init (&req->list);
if (rx_submit (dev, req, gfp_flags) < 0) {
defer_kevent (dev, WORK_RX_MEMORY);
return;
}
}
}
static void eth_work (void *_dev)
{
struct eth_dev *dev = _dev;
if (test_bit (WORK_RX_MEMORY, &dev->todo)) {
struct usb_request *req = 0;
if (netif_running (dev->net))
req = usb_ep_alloc_request (dev->in_ep, GFP_KERNEL);
rx_fill (dev, GFP_KERNEL);
else
clear_bit (WORK_RX_MEMORY, &dev->todo);
if (req != 0) {
clear_bit (WORK_RX_MEMORY, &dev->todo);
rx_submit (dev, req, GFP_KERNEL);
}
}
if (dev->todo)
......@@ -1484,10 +1590,10 @@ static void tx_complete (struct usb_ep *ep, struct usb_request *req)
}
dev->stats.tx_packets++;
usb_ep_free_request (ep, req);
list_add (&req->list, &dev->tx_reqs);
dev_kfree_skb_any (skb);
atomic_inc (&dev->tx_qlen);
atomic_dec (&dev->tx_qlen);
if (netif_carrier_ok (dev->net))
netif_wake_queue (dev->net);
}
......@@ -1499,10 +1605,10 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
int retval;
struct usb_request *req = 0;
if (!(req = usb_ep_alloc_request (dev->in_ep, GFP_ATOMIC))) {
DEBUG (dev, "no request\n");
goto drop;
}
req = container_of (dev->tx_reqs.next, struct usb_request, list);
list_del (&req->list);
if (list_empty (&dev->tx_reqs))
netif_stop_queue (net);
/* no buffer copies needed, unless the network stack did it
* or the hardware can't use skb buffers.
......@@ -1537,42 +1643,28 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
break;
case 0:
net->trans_start = jiffies;
if (atomic_dec_and_test (&dev->tx_qlen))
netif_stop_queue (net);
atomic_inc (&dev->tx_qlen);
}
if (retval) {
DEBUG (dev, "drop, code %d\n", retval);
drop:
dev->stats.tx_dropped++;
dev_kfree_skb_any (skb);
usb_ep_free_request (dev->in_ep, req);
if (list_empty (&dev->tx_reqs))
netif_start_queue (net);
list_add (&req->list, &dev->tx_reqs);
}
return 0;
}
static void eth_start (struct eth_dev *dev, int gfp_flags)
{
struct usb_request *req;
int retval = 0;
unsigned i;
int size = qlen (dev->gadget);
DEBUG (dev, "%s\n", __FUNCTION__);
/* fill the rx queue */
for (i = 0; retval == 0 && i < size; i++) {
req = usb_ep_alloc_request (dev->in_ep, gfp_flags);
if (req)
retval = rx_submit (dev, req, gfp_flags);
else if (i > 0)
defer_kevent (dev, WORK_RX_MEMORY);
else
retval = -ENOMEM;
}
rx_fill (dev, gfp_flags);
/* and open the tx floodgates */
atomic_set (&dev->tx_qlen, size);
atomic_set (&dev->tx_qlen, 0);
netif_wake_queue (dev->net);
}
......@@ -1590,7 +1682,7 @@ static int eth_stop (struct net_device *net)
{
struct eth_dev *dev = (struct eth_dev *) net->priv;
DEBUG (dev, "%s\n", __FUNCTION__);
VDEBUG (dev, "%s\n", __FUNCTION__);
netif_stop_queue (net);
DEBUG (dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n",
......@@ -1604,6 +1696,7 @@ static int eth_stop (struct net_device *net)
usb_ep_disable (dev->out_ep);
if (netif_carrier_ok (dev->net)) {
DEBUG (dev, "host still using in/out endpoints\n");
// FIXME idiom may leave toggle wrong here
usb_ep_enable (dev->in_ep, dev->in);
usb_ep_enable (dev->out_ep, dev->out);
}
......@@ -1662,6 +1755,8 @@ eth_bind (struct usb_gadget *gadget)
dev = net->priv;
spin_lock_init (&dev->lock);
INIT_WORK (&dev->work, eth_work, dev);
INIT_LIST_HEAD (&dev->tx_reqs);
INIT_LIST_HEAD (&dev->rx_reqs);
/* network device setup */
dev->net = net;
......@@ -1714,10 +1809,6 @@ eth_bind (struct usb_gadget *gadget)
dev->gadget = gadget;
set_gadget_data (gadget, dev);
gadget->ep0->driver_data = dev;
INFO (dev, "%s, " CHIP ", version: " DRIVER_VERSION "\n", driver_desc);
#ifdef DEV_CONFIG_CDC
INFO (dev, "CDC host enet %s\n", ethaddr);
#endif
/* two kinds of host-initiated state changes:
* - iff DATA transfer is active, carrier is "on"
......@@ -1728,8 +1819,16 @@ eth_bind (struct usb_gadget *gadget)
// SET_NETDEV_DEV (dev->net, &gadget->dev);
status = register_netdev (dev->net);
if (status == 0)
if (status == 0) {
INFO (dev, "%s, " CHIP ", version: " DRIVER_VERSION "\n",
driver_desc);
#ifdef DEV_CONFIG_CDC
INFO (dev, "CDC host enet %s\n", ethaddr);
#endif
return status;
}
dev_dbg(&gadget->dev, "register_netdev failed, %d\n", status);
fail:
eth_unbind (gadget);
return status;
......
drivers/usb/gadget/inode.c
View file @ 9559f65d
......@@ -354,6 +354,7 @@ static ssize_t
ep_io (struct ep_data *epdata, void *buf, unsigned len)
{
DECLARE_COMPLETION (done);
int value;
spin_lock_irq (&epdata->dev->lock);
if (likely (epdata->ep != NULL)) {
......@@ -363,14 +364,12 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len)
req->complete = epio_complete;
req->buf = buf;
req->length = len;
epdata->status = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
value = usb_ep_queue (epdata->ep, req, GFP_ATOMIC);
} else
epdata->status = -ENODEV;
value = -ENODEV;
spin_unlock_irq (&epdata->dev->lock);
if (epdata->status == 0) {
int value;
if (likely (value == 0)) {
value = wait_event_interruptible (done.wait, done.done);
if (value != 0) {
spin_lock_irq (&epdata->dev->lock);
......@@ -378,17 +377,21 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len)
DBG (epdata->dev, "%s i/o interrupted\n",
epdata->name);
usb_ep_dequeue (epdata->ep, epdata->req);
spin_unlock_irq (&epdata->dev->lock);
wait_event (done.wait, done.done);
if (epdata->status == 0)
epdata->status = value;
if (epdata->status == -ECONNRESET)
epdata->status = -EINTR;
} else {
spin_unlock_irq (&epdata->dev->lock);
DBG (epdata->dev, "endpoint gone\n");
epdata->status = -ENODEV;
}
spin_unlock_irq (&epdata->dev->lock);
}
}
return epdata->status;
}
return value;
}
......@@ -424,10 +427,12 @@ ep_read (struct file *fd, char *buf, size_t len, loff_t *ptr)
if (unlikely (!kbuf))
goto free1;
VDEBUG (data->dev, "%s read %d OUT\n", data->name, len);
value = ep_io (data, kbuf, len);
VDEBUG (data->dev, "%s read %d OUT, status %d\n",
data->name, len, value);
if (value >= 0 && copy_to_user (buf, kbuf, value))
value = -EFAULT;
free1:
up (&data->lock);
kfree (kbuf);
......@@ -470,8 +475,9 @@ ep_write (struct file *fd, const char *buf, size_t len, loff_t *ptr)
goto free1;
}
VDEBUG (data->dev, "%s write %d IN\n", data->name, len);
value = ep_io (data, kbuf, len);
VDEBUG (data->dev, "%s write %d IN, status %d\n",
data->name, len, value);
free1:
up (&data->lock);
kfree (kbuf);
......@@ -1200,9 +1206,11 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (value >= 0)
value = min (ctrl->wLength, (u16) value);
break;
default:
case USB_DT_STRING:
goto unrecognized;
default: // all others are errors
break;
}
break;
......
drivers/usb/host/uhci-hcd.c
View file @ 9559f65d
......@@ -1965,13 +1965,11 @@ static void reset_hc(struct uhci_hcd *uhci)
outw(USBCMD_GRESET, io_addr + USBCMD);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((HZ*50+999) / 1000);
set_current_state(TASK_RUNNING);
outw(0, io_addr + USBCMD);
/* Another 10ms delay */
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout((HZ*10+999) / 1000);
set_current_state(TASK_RUNNING);
uhci->resume_detect = 0;
}
......
drivers/usb/image/scanner.c
View file @ 9559f65d
/* -*- linux-c -*- */
/*
* Driver for USB Scanners (linux-2.5)
* Driver for USB Scanners (linux-2.6)
*
* Copyright (C) 1999, 2000, 2001, 2002 David E. Nelson
* Copyright (C) 2002, 2003 Henning Meier-Geinitz
......@@ -369,6 +369,18 @@
* - Added vendor/product ids for Avision, Canon, HP, Microtek and Relisys scanners.
* - Clean up irq urb when not enough memory is available.
*
* 0.4.15 2003-09-22
* - Use static declarations for usb_scanner_init/usb_scanner_exit
* (Daniele Bellucci).
* - Report back return codes of usb_register and usb_usbmit_urb instead of -1 or
* -ENONMEM (Daniele Bellucci).
* - Balancing usb_register_dev/usb_deregister_dev in probe_scanner when a fail
* condition occours (Daniele Bellucci).
* - Added vendor/product ids for Canon, HP, Microtek, Mustek, Siemens, UMAX, and
* Visioneer scanners.
* - Added test for USB_CLASS_CDC_DATA which is used by some fingerprint scanners.
*
*
* TODO
* - Performance
* - Select/poll methods
......@@ -950,6 +962,7 @@ probe_scanner(struct usb_interface *intf,
if (interface[0].desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC &&
interface[0].desc.bInterfaceClass != USB_CLASS_PER_INTERFACE &&
interface[0].desc.bInterfaceClass != USB_CLASS_CDC_DATA &&
interface[0].desc.bInterfaceClass != SCN_CLASS_SCANJET) {
dbg("probe_scanner: This interface doesn't look like a scanner (class=0x%x).", interface[0].desc.bInterfaceClass);
return -ENODEV;
......@@ -1043,6 +1056,7 @@ probe_scanner(struct usb_interface *intf,
scn->scn_irq = usb_alloc_urb(0, GFP_KERNEL);
if (!scn->scn_irq) {
usb_deregister_dev(intf, &scanner_class);
kfree(scn);
up(&scn_mutex);
return -ENOMEM;
......@@ -1061,11 +1075,13 @@ probe_scanner(struct usb_interface *intf,
// endpoint[(int)have_intr].bInterval);
250);
if (usb_submit_urb(scn->scn_irq, GFP_KERNEL)) {
retval = usb_submit_urb(scn->scn_irq, GFP_KERNEL);
if (retval) {
err("probe_scanner(%d): Unable to allocate INT URB.", intf->minor);
usb_deregister_dev(intf, &scanner_class);
kfree(scn);
up(&scn_mutex);
return -ENOMEM;
return retval;
}
}
......@@ -1076,6 +1092,7 @@ probe_scanner(struct usb_interface *intf,
if (have_intr)
usb_unlink_urb(scn->scn_irq);
usb_free_urb(scn->scn_irq);
usb_deregister_dev(intf, &scanner_class);
kfree(scn);
up(&scn_mutex);
return -ENOMEM;
......@@ -1087,6 +1104,7 @@ probe_scanner(struct usb_interface *intf,
if (have_intr)
usb_unlink_urb(scn->scn_irq);
usb_free_urb(scn->scn_irq);
usb_deregister_dev(intf, &scanner_class);
kfree(scn->obuf);
kfree(scn);
up(&scn_mutex);
......@@ -1169,22 +1187,25 @@ usb_driver scanner_driver = {
.id_table = ids,
};
void __exit
static void __exit
usb_scanner_exit(void)
{
usb_deregister(&scanner_driver);
}
int __init
static int __init
usb_scanner_init (void)
{
if (usb_register(&scanner_driver) < 0)
return -1;
int retval;
retval = usb_register(&scanner_driver);
if (retval)
goto out;
info(DRIVER_VERSION ":" DRIVER_DESC);
if (vendor != -1 && product != -1)
info("probe_scanner: User specified USB scanner -- Vendor:Product - %x:%x", vendor, product);
return 0;
out:
return retval;
}
module_init(usb_scanner_init);
......
drivers/usb/image/scanner.h
View file @ 9559f65d
/*
* Driver for USB Scanners (linux-2.5)
* Driver for USB Scanners (linux-2.6)
*
* Copyright (C) 1999, 2000, 2001, 2002 David E. Nelson
* Previously maintained by Brian Beattie
......@@ -43,7 +43,7 @@
// #define DEBUG
#define DRIVER_VERSION "0.4.14"
#define DRIVER_VERSION "0.4.15"
#define DRIVER_DESC "USB Scanner Driver"
#include <linux/usb.h>
......@@ -122,7 +122,10 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x04a9, 0x220d) }, /* CanoScan N670U/N676U/LIDE 20 */
{ USB_DEVICE(0x04a9, 0x220e) }, /* CanoScan N1240U/LIDE 30 */
{ USB_DEVICE(0x04a9, 0x220f) }, /* CanoScan 8000F */
{ USB_DEVICE(0x04a9, 0x2210) }, /* CanoScan 9900F */
{ USB_DEVICE(0x04a9, 0x2212) }, /* CanoScan 5000F */
{ USB_DEVICE(0x04a9, 0x2213) }, /* LIDE 50 */
{ USB_DEVICE(0x04a9, 0x2215) }, /* CanoScan 3000 */
{ USB_DEVICE(0x04a9, 0x3042) }, /* FS4000US */
/* Colorado -- See Primax/Colorado below */
/* Compaq */
......@@ -158,7 +161,9 @@ static struct usb_device_id scanner_device_ids [] = {
// { USB_DEVICE(0x03f0, 0x0701) }, /* ScanJet 5300C - NOT SUPPORTED - use hpusbscsi driver */
{ USB_DEVICE(0x03f0, 0x0705) }, /* ScanJet 4400C */
// { USB_DEVICE(0x03f0, 0x0801) }, /* ScanJet 7400C - NOT SUPPORTED - use hpusbscsi driver */
{ USB_DEVICE(0x03f0, 0x0805) }, /* ScanJet 4470c */
{ USB_DEVICE(0x03f0, 0x0901) }, /* ScanJet 2300C */
{ USB_DEVICE(0x03f0, 0x0a01) }, /* ScanJet 2400c */
{ USB_DEVICE(0x03F0, 0x1005) }, /* ScanJet 5400C */
{ USB_DEVICE(0x03F0, 0x1105) }, /* ScanJet 5470C */
{ USB_DEVICE(0x03f0, 0x1205) }, /* ScanJet 5550C */
......@@ -177,9 +182,11 @@ static struct usb_device_id scanner_device_ids [] = {
/* Memorex */
{ USB_DEVICE(0x0461, 0x0346) }, /* 6136u - repackaged Primax ? */
/* Microtek */
{ USB_DEVICE(0x05da, 0x20a7) }, /* ScanMaker 5600 */
{ USB_DEVICE(0x05da, 0x20c9) }, /* ScanMaker 6700 */
{ USB_DEVICE(0x05da, 0x30ce) }, /* ScanMaker 3800 */
{ USB_DEVICE(0x05da, 0x30cf) }, /* ScanMaker 4800 */
{ USB_DEVICE(0x05da, 0x30d4) }, /* ScanMaker 3830 + 3840 */
{ USB_DEVICE(0x04a7, 0x0224) }, /* Scanport 3000 (actually Visioneer?)*/
/* The following SCSI-over-USB Microtek devices are supported by the
microtek driver: Enable SCSI and USB Microtek in kernel config */
......@@ -214,6 +221,7 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x055f, 0x021e) }, /* BearPaw 1200 TA/CS */
{ USB_DEVICE(0x055f, 0x0400) }, /* BearPaw 2400 TA PRO */
{ USB_DEVICE(0x055f, 0x0401) }, /* P 3600 A3 Pro */
{ USB_DEVICE(0x055f, 0x0409) }, /* BearPaw 2448TA Pro */
{ USB_DEVICE(0x055f, 0x0873) }, /* ScanExpress 600 USB */
{ USB_DEVICE(0x055f, 0x1000) }, /* BearPaw 4800 TA PRO */
// { USB_DEVICE(0x05d8, 0x4002) }, /* BearPaw 1200 CU and ScanExpress 1200 UB Plus (see Artec) */
......@@ -279,6 +287,9 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x04b8, 0x011e) }, /* Perfection 1660 Photo */
{ USB_DEVICE(0x04b8, 0x0801) }, /* Stylus CX5200 */
{ USB_DEVICE(0x04b8, 0x0802) }, /* Stylus CX3200 */
/* Siemens */
{ USB_DEVICE(0x0681, 0x0005) }, /* ID Mouse Professional */
{ USB_DEVICE(0x0681, 0x0010) }, /* Cherry FingerTIP ID Board - Sensor */
/* SYSCAN */
{ USB_DEVICE(0x0a82, 0x4600) }, /* TravelScan 460/464 */
/* Trust */
......@@ -289,6 +300,7 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x1606, 0x0010) }, /* Astra 1220U */
{ USB_DEVICE(0x1606, 0x0030) }, /* Astra 2000U */
{ USB_DEVICE(0x1606, 0x0060) }, /* Astra 3400U/3450U */
{ USB_DEVICE(0x1606, 0x0070) }, /* Astra 4400 */
{ USB_DEVICE(0x1606, 0x0130) }, /* Astra 2100U */
{ USB_DEVICE(0x1606, 0x0160) }, /* Astra 5400U */
{ USB_DEVICE(0x1606, 0x0230) }, /* Astra 2200U */
......@@ -296,7 +308,8 @@ static struct usb_device_id scanner_device_ids [] = {
{ USB_DEVICE(0x04a7, 0x0211) }, /* OneTouch 7600 USB */
{ USB_DEVICE(0x04a7, 0x0221) }, /* OneTouch 5300 USB */
{ USB_DEVICE(0x04a7, 0x0224) }, /* OneTouch 4800 USB */
{ USB_DEVICE(0x04a7, 0x0226) }, /* OneTouch 5300 USB */
{ USB_DEVICE(0x04a7, 0x0226) }, /* OneTouch 5800 USB */
{ USB_DEVICE(0x04a7, 0x022c) }, /* OneTouch 9020 USB */
{ USB_DEVICE(0x04a7, 0x0231) }, /* 6100 USB */
{ USB_DEVICE(0x04a7, 0x0311) }, /* 6200 EPP/USB */
{ USB_DEVICE(0x04a7, 0x0321) }, /* OneTouch 8100 EPP/USB */
......
drivers/usb/input/Kconfig
View file @ 9559f65d
......@@ -112,8 +112,8 @@ config USB_MOUSE
depends on USB && INPUT
---help---
Say Y here only if you are absolutely sure that you don't want
to use the generic HID driver for your USB keyboard and prefer
to use the keyboard in its limited Boot Protocol mode instead.
to use the generic HID driver for your USB mouse and prefer
to use the mouse in its limited Boot Protocol mode instead.
This is almost certainly not what you want. This is mostly
useful for embedded applications or simple mice.
......
drivers/usb/net/Kconfig
View file @ 9559f65d
......@@ -7,25 +7,6 @@ comment "USB Network adaptors"
comment "Networking support is needed for USB Networking device support"
depends on USB && !NET
config USB_AX8817X_STANDALONE
tristate "USB ASIX AX8817X Ethernet device support (EXPERIMENTAL)"
depends on USB && NET && EXPERIMENTAL
---help---
Say Y if you want to use one of the following 10/100Mps USB
Ethernet devices based on the ASIX AX88172 chip. Supported
devices are:
ASIX AX88172
D-Link DUB-E100
Hawking UF200
Netgear FA120
This driver makes the adapter appear as a normal Ethernet interface,
typically on eth0, if it is the only ethernet device, or perhaps on
eth1, if you have a PCI or ISA ethernet card installed.
To compile this driver as a module, choose M here: the
module will be called ax8817x.
config USB_CATC
tristate "USB CATC NetMate-based Ethernet device support (EXPERIMENTAL)"
depends on USB && NET && EXPERIMENTAL
......
drivers/usb/net/Makefile
View file @ 9559f65d
......@@ -2,7 +2,6 @@
# Makefile for USB Network drivers
#
obj-$(CONFIG_USB_AX8817X_STANDALONE) += ax8817x.o
obj-$(CONFIG_USB_CATC) += catc.o
obj-$(CONFIG_USB_KAWETH) += kaweth.o
obj-$(CONFIG_USB_PEGASUS) += pegasus.o
......
drivers/usb/net/Makefile.mii
View file @ 9559f65d
......@@ -2,6 +2,5 @@
# Makefile for USB Network drivers which require generic MII code.
#
obj-$(CONFIG_USB_AX8817X) += mii.o
obj-$(CONFIG_USB_PEGASUS) += mii.o
obj-$(CONFIG_USB_USBNET) += mii.o
drivers/usb/net/ax8817x.c deleted 100644 → 0
View file @ 70b812cd
/*
* ASIX AX8817x USB 2.0 10/100/HomePNA Ethernet controller driver
*
* $Id: ax8817x.c,v 1.18 2003/07/24 11:08:17 dhollis Exp $
*
* Copyright (c) 2002-2003 TiVo Inc.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* History
*
* 2003-07-24 - Dave Hollis <dhollis@davehollis.com> 2.0.2
* * Minor fix that greatly increases rx performance
* 2003-07-22 - Dave Hollis <dhollis@davehollis.com> 2.0.1
* * Add Intellinet USB ids
* * Fix mii/ethtool support - link check works!
* * Add msglevel support
* * Shamelessly 'borrowed' devdbg/err/info macros from usbnet
* * Change strlcpy to strncpy
* 2003-06-15 - Dave Hollis <dhollis@davehollis.com> 2.0.0
* * Remove crc32 inline function, use core kernel instead
* * Set sane defaults for rx_buffers
* * Fix ethtool GETDRVINFO bits - use strlcpy and
* usb_make_path
*
* 2003-06-05 - Dave Hollis <dhollis@davehollis.com> 0.10.0
* * Port to 2.5 series kernels
* * Remove #if 0 blocks that are confirmed
* unnecessary
* * Re-did tx routines based off pegasus driver.
* This resolved hard crashes and greatly simplified
* things.
* * Redo mii/ethtool routines
*
* 2003-05-31 - Dave Hollis <dhollis@davehollis.com> 0.9.8
* * Don't stop/start the queue in start_xmit
* * Swallow URB status upon hard removal
* * Cleanup remaining comments (kill // style)
*
* 2003-05-29 - Dave Hollis <dhollis@davehollis.com> 0.9.7
* * Set module owner
* * Follow-up on suggestions from David Brownell &
* Oliver Neukum which should help with robustness
* * Use ether_crc from stock kernel if available
*
* 2003-05-28 - Dave Hollis <dhollis@davehollis.com> 0.9.6
* * Added basic ethtool & mii support
*
* 2003-05-28 - Dave Hollis <dhollis@davehollis.com> 0.9.5
* * Workout devrequest change to usb_ctrlrequest structure
* * Replace FILL_BULK_URB macros to non-deprecated
* usb_fill_bulk_urb macros
* * Replace printks with equivalent macros
* * Use defines for module description, version, author to
* simplify future changes
*
* Known Issues
*
* Todo
* Fix receive performance on OHCI
*/
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/crc32.h>
#include <asm/uaccess.h>
/* Version Information */
#define DRIVER_VERSION "v2.0.2"
#define DRIVER_AUTHOR "TiVo, Inc."
#define DRIVER_DESC "ASIX AX8817x USB Ethernet driver"
#define DRIVER_NAME "ax8817x"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
#define AX_REQ_READ ( USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE )
#define AX_REQ_WRITE ( USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE )
#define AX_CMD_SET_SW_MII 0x06
#define AX_CMD_READ_MII_REG 0x07
#define AX_CMD_WRITE_MII_REG 0x08
#define AX_CMD_SET_HW_MII 0x0a
#define AX_CMD_WRITE_RX_CTL 0x10
#define AX_CMD_WRITE_MULTI_FILTER 0x16
#define AX_CMD_READ_NODE_ID 0x17
#define AX_CMD_READ_PHY_ID 0x19
#define AX_CMD_WRITE_MEDIUM_MODE 0x1b
#define AX_CMD_WRITE_GPIOS 0x1f
#define AX_RX_MAX ETH_FRAME_LEN
#define AX_TIMEOUT_CMD ( HZ / 10 )
#define AX_TIMEOUT_TX ( HZ * 2 )
#define AX_MCAST_FILTER_SIZE 8
#define AX_MAX_MCAST 64
#define AX_DRV_STATE_INITIALIZING 0x00
#define AX_DRV_STATE_RUNNING 0x01
#define AX_DRV_STATE_EXITING 0x02
#define AX_PHY_STATE_INITIALIZING 0x00
#define AX_PHY_STATE_NO_LINK 0x01
#define AX_PHY_STATE_POLLING_1 0x02
#define AX_PHY_STATE_POLLING_2 0x03
#define AX_PHY_STATE_POLLING_3 0x04
#define AX_PHY_STATE_POLLING_4 0x05
#define AX_PHY_STATE_SETTING_MAC 0x06
#define AX_PHY_STATE_LINK 0x07
#define AX_PHY_STATE_ABORT_POLL 0x08
#define AX_PHY_STATE_ABORTING 0x09
#define AX_MAX_PHY_RETRY 50
#define AX_RX_URBS_DEFAULT 2
static int n_rx_urbs = AX_RX_URBS_DEFAULT;
MODULE_PARM(n_rx_urbs, "i");
MODULE_PARM_DESC(n_rx_urbs,
"Number of rx buffers to queue at once (def 2)");
struct ax8817x_info;
struct ax_cmd_req;
typedef int (*ax_cmd_callback_t) (struct ax8817x_info *,
struct ax_cmd_req *);
struct ax_cmd_req {
struct list_head list;
ax_cmd_callback_t cmd_callback;
void *priv;
int status;
void *data;
int data_size;
int timeout;
struct usb_ctrlrequest devreq;
};
struct ax8817x_info {
struct usb_device *usb;
struct net_device *net;
struct net_device_stats stats;
struct mii_if_info mii;
struct urb **rx_urbs;
struct urb *int_urb;
struct urb *tx_urb;
u8 *int_buf;
struct urb *ctl_urb;
struct list_head ctl_queue;
spinlock_t ctl_lock;
atomic_t rx_refill_cnt;
struct ax_cmd_req phy_req;
u8 phy_id;
u8 phy_state;
u8 drv_state;
int msg_level;
};
const struct usb_device_id ax8817x_id_table[] = {
/* Linksys USB200M */
{USB_DEVICE(0x077b, 0x2226), driver_info:0x00130103},
/* Hawking UF200, TRENDnet TU2-ET100 */
{USB_DEVICE(0x07b8, 0x420a), driver_info:0x001f1d1f},
/* NETGEAR FA120 */
{USB_DEVICE(0x0846, 0x1040), driver_info:0x00130103},
/* D-Link DUB-E100 */
{USB_DEVICE(0x2001, 0x1a00), driver_info:0x009f9d9f},
/* Intellinet USB Ethernet */
{USB_DEVICE(0x0b95, 0x1720), driver_info:0x00130103},
{}
};
MODULE_DEVICE_TABLE(usb, ax8817x_id_table);
/* The space before the ", ## arg" is deliberate: gcc-2.9x needs it */
#ifdef DEBUG
#define devdbg(ax_info, fmt, arg...) \
printk(KERN_DEBUG "%s: " fmt "\n" , (ax_info)->net->name , ## arg)
#else
#define devdbg(ax_info, fmt, arg...) do {} while(0)
#endif
#define deverr(ax_info, fmt, arg...) \
printk(KERN_ERR "%s: " fmt "\n", (ax_info)->net->name , ## arg)
#define devinfo(ax_info, fmt, arg...) \
do { if ((ax_info)->msg_level >= 1) \
printk(KERN_INFO "%s: " fmt "\n", \
(ax_info)->net->name , ## arg); \
} while (0)
static void ax_run_ctl_queue(struct ax8817x_info *, struct ax_cmd_req *,
int);
static void ax_rx_callback(struct urb *, struct pt_regs *);
static void ax_ctl_callback(struct urb *urb, struct pt_regs *regs)
{
struct ax8817x_info *ax_info =
(struct ax8817x_info *) urb->context;
ax_run_ctl_queue(ax_info, NULL,
urb->status ? urb->status : urb->actual_length);
}
/*
* Queue a new ctl request, or dequeue the first in the list
*/
static void ax_run_ctl_queue(struct ax8817x_info *ax_info,
struct ax_cmd_req *req, int status)
{
struct ax_cmd_req *next_req = NULL;
struct ax_cmd_req *last_req = NULL;
unsigned long flags;
/* Need to lock around queue list manipulation */
spin_lock_irqsave(&ax_info->ctl_lock, flags);
if (req == NULL) {
last_req =
list_entry(ax_info->ctl_queue.next, struct ax_cmd_req,
list);
} else {
if (list_empty(&ax_info->ctl_queue)) {
next_req = req;
}
req->status = -EINPROGRESS;
list_add_tail(&req->list, &ax_info->ctl_queue);
}
while (1) {
if (last_req != NULL) {
/* dequeue completed entry */
list_del(&last_req->list);
last_req->status = status;
if (last_req->cmd_callback(ax_info, last_req)) {
/* requeue if told to do so */
last_req->status = -EINPROGRESS;
list_add_tail(&last_req->list,
&ax_info->ctl_queue);
}
if (list_empty(&ax_info->ctl_queue)) {
next_req = NULL;
} else {
next_req =
list_entry(ax_info->ctl_queue.next,
struct ax_cmd_req, list);
}
}
spin_unlock_irqrestore(&ax_info->ctl_lock, flags);
if (next_req == NULL) {
break;
}
/* XXX: do something with timeout */
usb_fill_control_urb(ax_info->ctl_urb, ax_info->usb,
next_req->devreq.
bRequestType & USB_DIR_IN ?
usb_rcvctrlpipe(ax_info->usb,
0) :
usb_sndctrlpipe(ax_info->usb, 0),
(void *) &next_req->devreq,
next_req->data, next_req->data_size,
ax_ctl_callback, ax_info);
status = usb_submit_urb(ax_info->ctl_urb, GFP_ATOMIC);
if (status >= 0) {
break;
}
last_req = next_req;
spin_lock_irqsave(&ax_info->ctl_lock, flags);
}
}
static int ax_sync_cmd_callback(struct ax8817x_info *unused,
struct ax_cmd_req *req)
{
wait_queue_head_t *wq = (wait_queue_head_t *) req->priv;
wake_up(wq);
return 0;
}
static int ax_async_cmd_callback(struct ax8817x_info *unused,
struct ax_cmd_req *req)
{
if (req->status < 0) {
err("%s: Async command %d failed: %d\n", __FUNCTION__,
req->devreq.bRequest, req->status);
}
/* Nothing else to do here, just need to free the request (and its
allocated data) */
if (req->data != NULL) {
kfree(req->data);
}
kfree(req);
return 0;
}
/*
* This is mostly the same as usb_control_msg(), except that it is able
* to queue control messages
*/
static int ax_control_msg(struct ax8817x_info *ax_info, u8 requesttype,
u8 request, u16 value, u16 index, void *data,
u16 size, int timeout)
{
struct ax_cmd_req *req;
DECLARE_WAIT_QUEUE_HEAD(wq);
DECLARE_WAITQUEUE(wait, current);
int ret;
req = kmalloc(sizeof(struct ax_cmd_req), GFP_KERNEL);
if (req == NULL) {
return -ENOMEM;
}
req->devreq.bRequestType = requesttype;
req->devreq.bRequest = request;
req->devreq.wValue = cpu_to_le16(value);
req->devreq.wIndex = cpu_to_le16(index);
req->devreq.wLength = cpu_to_le16(size);
req->data = data;
req->data_size = size;
req->timeout = timeout;
req->priv = &wq;
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&wq, &wait);
req->cmd_callback = ax_sync_cmd_callback;
ax_run_ctl_queue(ax_info, req, 0);
schedule();
ret = req->status;
kfree(req);
return ret;
}
/*
* Same, but can be used asynchronously, may fail, and returns no exit
* status
*/
static void ax_control_msg_async(struct ax8817x_info *ax_info,
u8 requesttype, u8 request, u16 value,
u16 index, void *data, u16 size,
int timeout)
{
struct ax_cmd_req *req;
req = kmalloc(sizeof(struct ax_cmd_req), GFP_ATOMIC);
if (req == NULL) {
/* There's not much else we can do here... */
err("%s: Failed alloc\n", __FUNCTION__);
return;
}
req->devreq.bRequestType = requesttype;
req->devreq.bRequest = request;
req->devreq.wValue = cpu_to_le16(value);
req->devreq.wIndex = cpu_to_le16(index);
req->devreq.wLength = cpu_to_le16(size);
req->data = data;
req->data_size = size;
req->timeout = timeout;
req->cmd_callback = ax_async_cmd_callback;
ax_run_ctl_queue(ax_info, req, 0);
}
static inline int ax_read_cmd(struct ax8817x_info *ax_info, u8 cmd,
u16 value, u16 index, u16 size, void *data)
{
return ax_control_msg(ax_info, AX_REQ_READ, cmd, value, index,
data, size, AX_TIMEOUT_CMD);
}
static inline int ax_write_cmd(struct ax8817x_info *ax_info, u8 cmd,
u16 value, u16 index, u16 size, void *data)
{
return ax_control_msg(ax_info, AX_REQ_WRITE, cmd, value, index,
data, size, AX_TIMEOUT_CMD);
}
static inline void ax_write_cmd_async(struct ax8817x_info *ax_info, u8 cmd,
u16 value, u16 index, u16 size,
void *data)
{
ax_control_msg_async(ax_info, AX_REQ_WRITE, cmd, value, index,
data, size, AX_TIMEOUT_CMD);
}
static int ax_refill_rx_urb(struct ax8817x_info *ax_info, struct urb *urb)
{
struct sk_buff *skb;
int ret;
skb = dev_alloc_skb(AX_RX_MAX + 2);
if (skb != NULL) {
skb_reserve(skb, 2); /* for IP header alignment */
skb->dev = ax_info->net;
usb_fill_bulk_urb(urb, ax_info->usb,
usb_rcvbulkpipe(ax_info->usb, 3),
skb->data, AX_RX_MAX, ax_rx_callback,
skb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
err("Failed submit rx URB (%d)\n", ret);
dev_kfree_skb_irq(skb);
urb->context = NULL;
} else {
ret = 0;
}
} else {
/* this just means we're low on memory at the moment. Try to
handle it gracefully. */
urb->context = NULL;
ret = 1;
}
return ret;
}
static int ax_phy_cmd_callback(struct ax8817x_info *ax_info,
struct ax_cmd_req *req)
{
int full_duplex;
int flow_control;
u16 mii_data_le;
if (req->status < 0) {
err("%s: Failed at state %d: %d\n", __FUNCTION__,
ax_info->phy_state, req->status);
/* Not sure what else we can do, so just bail */
ax_info->phy_state = AX_PHY_STATE_ABORTING;
}
switch (ax_info->phy_state) {
/* Now that we're in software MII mode, read the BMSR */
case AX_PHY_STATE_POLLING_1:
ax_info->phy_state = AX_PHY_STATE_POLLING_2;
req->devreq.bRequestType = AX_REQ_READ;
req->devreq.bRequest = AX_CMD_READ_MII_REG;
req->devreq.wValue = cpu_to_le16(ax_info->phy_id);
req->devreq.wIndex = cpu_to_le16(MII_BMSR);
req->devreq.wLength = cpu_to_le16(2);
req->data_size = 2;
req->priv = 0; /* This is the retry count */
return 1;
/* Done reading BMSR */
case AX_PHY_STATE_POLLING_2:
mii_data_le = *(u16 *) req->data;
if ((mii_data_le &
cpu_to_le16(BMSR_LSTATUS | BMSR_ANEGCAPABLE))
== cpu_to_le16(BMSR_LSTATUS | BMSR_ANEGCAPABLE)) {
if (mii_data_le & cpu_to_le16(BMSR_ANEGCOMPLETE)) {
/* Autonegotiation done, go on to read LPA */
ax_info->phy_state =
AX_PHY_STATE_POLLING_3;
req->devreq.wIndex = cpu_to_le16(MII_LPA);
return 1;
} else if ((long) req->priv++ < AX_MAX_PHY_RETRY) {
/* Reread BMSR if it's still autonegotiating. This is
probably unnecessary logic, I've never seen it take
more than 1 try... */
return 1;
}
/* else fall through to abort */
}
/* XXX: should probably handle auto-neg failure better,
by reverting to manual setting of something safe. (?) */
ax_info->phy_state = AX_PHY_STATE_ABORT_POLL;
/* and then fall through to set hw MII */
/* Got what we needed from PHY, set back to hardware MII mode
(Do same for abort in mid-poll) */
case AX_PHY_STATE_POLLING_3:
case AX_PHY_STATE_ABORT_POLL:
ax_info->phy_state += 1;
req->devreq.bRequestType = AX_REQ_WRITE;
req->devreq.bRequest = AX_CMD_SET_HW_MII;
req->devreq.wValue = cpu_to_le16(0);
req->devreq.wIndex = cpu_to_le16(0);
req->devreq.wLength = cpu_to_le16(0);
req->data_size = 0;
return 1;
/* The end result, set the right duplex and flow control mode in the
MAC (based on the PHY's LPA reg, which should still be in the data
buffer) */
case AX_PHY_STATE_POLLING_4:
mii_data_le = *(u16 *) req->data;
ax_info->phy_state = AX_PHY_STATE_SETTING_MAC;
req->devreq.bRequest = AX_CMD_WRITE_MEDIUM_MODE;
full_duplex = mii_data_le & cpu_to_le16(LPA_DUPLEX);
flow_control = full_duplex &&
(mii_data_le & cpu_to_le16(0x0400));
req->devreq.wValue = cpu_to_le16(0x04) |
(full_duplex ? cpu_to_le16(0x02) : 0) |
(flow_control ? cpu_to_le16(0x10) : 0);
info("%s: Link established, %s duplex, flow control %sabled\n", ax_info->net->name, full_duplex ? "full" : "half", flow_control ? "en" : "dis");
return 1;
/* All done */
case AX_PHY_STATE_SETTING_MAC:
ax_info->phy_state = AX_PHY_STATE_LINK;
netif_carrier_on(ax_info->net);
return 0;
default:
err("%s: Unknown state %d\n", __FUNCTION__,
ax_info->phy_state);
/* fall through */
case AX_PHY_STATE_ABORTING:
ax_info->phy_state = AX_PHY_STATE_NO_LINK;
return 0;
}
}
static void ax_int_callback(struct urb *urb, struct pt_regs *regs)
{
struct ax8817x_info *ax_info =
(struct ax8817x_info *) urb->context;
u8 phy_link;
if (ax_info->drv_state == AX_DRV_STATE_EXITING ||
urb->actual_length < 3) {
return;
}
/* Ignore the first PHY link report, it will sometimes be reported as
link active, even though we just told the PHY to reset. If it
really has link, we'll pick it up next int callback.
*/
if (ax_info->phy_state == AX_PHY_STATE_INITIALIZING) {
netif_carrier_off(ax_info->net);
ax_info->phy_state = AX_PHY_STATE_NO_LINK;
return;
}
/* Assume we're only interested in the primary PHY for now. */
phy_link = ax_info->int_buf[2] & 1;
if (phy_link ==
(ax_info->phy_state == AX_PHY_STATE_NO_LINK) ? 0 : 1) {
/* Common case, no change */
return;
}
if (phy_link == 0) {
netif_carrier_off(ax_info->net);
/* Abort an in-progress poll of the PHY if necessary */
switch (ax_info->phy_state) {
case AX_PHY_STATE_POLLING_1:
case AX_PHY_STATE_POLLING_2:
case AX_PHY_STATE_POLLING_3:
ax_info->phy_state = AX_PHY_STATE_ABORT_POLL;
break;
case AX_PHY_STATE_POLLING_4:
case AX_PHY_STATE_SETTING_MAC:
ax_info->phy_state = AX_PHY_STATE_ABORTING;
break;
case AX_PHY_STATE_LINK:
ax_info->phy_state = AX_PHY_STATE_NO_LINK;
break;
default:
/* If we're already aborting, continue aborting */
break;
}
} else {
/* Note that we only fall into this case if previous phy_state was
AX_PHY_STATE_NO_LINK. When the link is reported active while
we're still polling, or when we're aborting, the logic above
will just return, and we'll check again next int callback. */
ax_info->phy_state = AX_PHY_STATE_POLLING_1;
ax_info->phy_req.devreq.bRequestType = AX_REQ_WRITE;
ax_info->phy_req.devreq.bRequest = AX_CMD_SET_SW_MII;
ax_info->phy_req.devreq.wValue = cpu_to_le16(0);
ax_info->phy_req.devreq.wIndex = cpu_to_le16(0);
ax_info->phy_req.devreq.wLength = cpu_to_le16(0);
ax_info->phy_req.data_size = 0;
ax_info->phy_req.timeout = AX_TIMEOUT_CMD;
ax_info->phy_req.cmd_callback = ax_phy_cmd_callback;
ax_run_ctl_queue(ax_info, &ax_info->phy_req, 0);
}
}
static void ax_rx_callback(struct urb *urb, struct pt_regs *regs)
{
struct sk_buff *skb = (struct sk_buff *) urb->context;
struct net_device *net = skb->dev;
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
int ret, len, refill;
switch (urb->status) {
case 0:
break;
default:
err("%s: URB status %d\n", __FUNCTION__, urb->status);
/* It's not clear that we can do much in this case, the rx pipe
doesn't ever seem to stall, so if we got -ETIMEDOUT, that
usually means the device was unplugged, and we just haven't
noticed yet.
Just fall through and free skb without resubmitting urb. */
case -ENOENT: /* */
case -ECONNRESET: /* Async unlink */
case -ESHUTDOWN: /* Hardware gone */
case -EILSEQ: /* Get this when you yank it out on UHCI */
case -ETIMEDOUT: /* OHCI */
case -EPROTO: /* EHCI */
case -EPIPE:
dev_kfree_skb_any(skb);
urb->context = NULL;
return;
}
if (ax_info->drv_state == AX_DRV_STATE_INITIALIZING) {
/* Not really expecting this to ever happen, since we haven't yet
enabled receive in the rx_ctl register, but ya never know... */
goto refill_same;
} else if (ax_info->drv_state == AX_DRV_STATE_EXITING) {
dev_kfree_skb_any(skb);
urb->context = NULL;
return;
}
len = urb->actual_length;
if (len == 0) {
/* this shouldn't happen... */
goto refill_same;
}
refill = ax_refill_rx_urb(ax_info, urb);
if (refill == 0
|| atomic_read(&ax_info->rx_refill_cnt) < n_rx_urbs) {
/* Send the receive buffer up the network stack */
skb_put(skb, len);
skb->protocol = eth_type_trans(skb, net);
net->last_rx = jiffies;
ax_info->stats.rx_packets++;
ax_info->stats.rx_bytes += len;
netif_rx(skb);
if (refill == 0) {
int i;
/* This is the common case. This URB got refilled OK, and
no other URBs need to be refilled. */
if (atomic_read(&ax_info->rx_refill_cnt) == 0) {
return;
}
for (i = 0; i < n_rx_urbs; i++) {
struct urb *urb = ax_info->rx_urbs[i];
if (urb->context == NULL) {
if (ax_refill_rx_urb(ax_info, urb)
== 0) {
atomic_dec(&ax_info->
rx_refill_cnt);
} else {
break;
}
}
}
} else {
/* remember to refill this one later */
atomic_inc(&ax_info->rx_refill_cnt);
}
return;
} else {
ax_info->stats.rx_dropped++;
if (refill < 0) {
/* the error code was already printk'ed in ax_refill_rx_urb()
so just note the consequences here: */
warn("Halting rx due to error\n");
return;
}
/* fall through to resubmit this URB with the existing skb
will try to reallocate skb's on next rx callback */
}
refill_same:
usb_fill_bulk_urb(urb, ax_info->usb,
usb_rcvbulkpipe(ax_info->usb, 3), skb->data,
AX_RX_MAX, ax_rx_callback, skb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
if (ret < 0) {
err("Failed submit rx URB (%d)\n", ret);
}
}
static int ax8817x_open(struct net_device *net)
{
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
u8 buf[4];
int i, ret;
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf);
if (ret < 0) {
return ret;
}
ret = 0;
ax_info->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (ax_info->tx_urb == NULL) {
err("Error allocating tx_urb!");
ret = -ENOMEM;
}
atomic_set(&ax_info->rx_refill_cnt, 0);
for (i = 0; i < n_rx_urbs && ret == 0; i++) {
struct urb *urb = ax_info->rx_urbs[i];
if (urb == NULL) {
urb = ax_info->rx_urbs[i] =
usb_alloc_urb(0, GFP_KERNEL);
if (urb == NULL) {
ret = -ENOMEM;
break;
}
if (n_rx_urbs > 1) {
urb->transfer_flags |= URB_ZERO_PACKET;
}
}
ret = ax_refill_rx_urb(ax_info, urb);
if (ret == 1) {
atomic_inc(&ax_info->rx_refill_cnt);
ret = 0;
}
}
/* XXX: should handle the case where we couldn't allocate any skb's
better. They get allocated with GFP_ATOMIC, so they may all fail... */
if (ret == 0 && atomic_read(&ax_info->rx_refill_cnt) < n_rx_urbs) {
netif_start_queue(net);
} else {
/* Error: clean up anything we allocated and bail. */
usb_free_urb(ax_info->tx_urb);
for (i = 0; i < n_rx_urbs; i++) {
struct urb *urb = ax_info->rx_urbs[i];
if (urb != NULL) {
/* skb gets freed in the URB callback */
usb_unlink_urb(urb);
usb_free_urb(urb);
}
}
err("%s: Failed start rx queue (%d)\n", __FUNCTION__, ret);
}
return ret;
}
static int ax8817x_stop(struct net_device *net)
{
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
u8 buf[4];
int i, ret;
netif_stop_queue(net);
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf);
if (ret < 0 && ax_info->drv_state != AX_DRV_STATE_EXITING) {
err("%s: Failed cmd (%d)\n", __FUNCTION__, ret);
}
if (ax_info->tx_urb != NULL) {
usb_unlink_urb(ax_info->tx_urb);
usb_free_urb(ax_info->tx_urb);
ax_info->tx_urb = NULL;
}
for (i = 0; i < n_rx_urbs; i++) {
struct urb *urb = ax_info->rx_urbs[i];
if (urb != NULL) {
/* skb gets freed in the URB callback */
usb_unlink_urb(urb);
usb_free_urb(urb);
ax_info->rx_urbs[i] = NULL;
}
}
return 0;
}
static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
{
struct ax8817x_info *ax_info = urb->context;
if (!ax_info || (ax_info->drv_state == AX_DRV_STATE_EXITING))
return;
if (!netif_device_present(ax_info->net))
return;
if (urb->status)
info("%s: TX status %d", ax_info->net->name, urb->status);
ax_info->net->trans_start = jiffies;
netif_wake_queue(ax_info->net);
}
static int ax8817x_start_xmit(struct sk_buff *skb, struct net_device *net)
{
struct ax8817x_info *ax_info = net->priv;
int res;
netif_stop_queue(net);
ax_info->tx_urb->transfer_flags |= URB_ZERO_PACKET;
usb_fill_bulk_urb(ax_info->tx_urb, ax_info->usb,
usb_sndbulkpipe(ax_info->usb, 2),
skb->data, skb->len, write_bulk_callback,
ax_info);
if ((res = usb_submit_urb(ax_info->tx_urb, GFP_ATOMIC))) {
warn("Failed tx_urb %d", res);
ax_info->stats.tx_errors++;
netif_start_queue(net);
} else {
ax_info->stats.tx_packets++;
ax_info->stats.tx_bytes += skb->len;
net->trans_start = jiffies;
}
dev_kfree_skb(skb);
return 0;
}
static void ax8817x_tx_timeout(struct net_device *net)
{
struct ax8817x_info *ax_info = net->priv;
if (!ax_info)
return;
warn("%s: Tx timed out.", net->name);
ax_info->tx_urb->transfer_flags |= URB_ASYNC_UNLINK;
usb_unlink_urb(ax_info->tx_urb);
ax_info->stats.tx_errors++;
}
static struct net_device_stats *ax8817x_stats(struct net_device *net)
{
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
return &ax_info->stats;
}
static void ax8817x_set_multicast(struct net_device *net)
{
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
u8 rx_ctl = 0x8c;
if (net->flags & IFF_PROMISC) {
rx_ctl |= 0x01;
} else if (net->flags & IFF_ALLMULTI
|| net->mc_count > AX_MAX_MCAST) {
rx_ctl |= 0x02;
} else if (net->mc_count == 0) {
/* just broadcast and directed */
} else {
struct dev_mc_list *mc_list = net->mc_list;
u8 *multi_filter;
u32 crc_bits;
int i;
multi_filter = kmalloc(AX_MCAST_FILTER_SIZE, GFP_ATOMIC);
if (multi_filter == NULL) {
/* Oops, couldn't allocate a DMA buffer for setting the multicast
filter. Try all multi mode, although the ax_write_cmd_async
will almost certainly fail, too... (but it will printk). */
rx_ctl |= 0x02;
} else {
memset(multi_filter, 0, AX_MCAST_FILTER_SIZE);
/* Build the multicast hash filter. */
for (i = 0; i < net->mc_count; i++) {
crc_bits =
ether_crc(ETH_ALEN,
mc_list->dmi_addr) >> 26;
multi_filter[crc_bits >> 3] |=
1 << (crc_bits & 7);
mc_list = mc_list->next;
}
ax_write_cmd_async(ax_info,
AX_CMD_WRITE_MULTI_FILTER, 0, 0,
AX_MCAST_FILTER_SIZE, multi_filter);
rx_ctl |= 0x10;
}
}
ax_write_cmd_async(ax_info, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0,
NULL);
}
static int read_mii_word(struct ax8817x_info *ax_info, __u8 phy, __u8 indx,
__u16 * regd)
{
int ret;
u8 buf[4];
devdbg(ax_info,"read_mii_word: phy=%02x, indx=%02x, regd=%04x", phy, indx, *regd);
ax_write_cmd(ax_info, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
ret = ax_read_cmd(ax_info, AX_CMD_READ_MII_REG, ax_info->phy_id, (__u16)indx, 2, regd);
devdbg(ax_info,"read_mii_word: AX_CMD_READ_MII_REG ret=%02x, regd=%04x", ret, *regd);
ax_write_cmd(ax_info, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
return ret;
}
static int write_mii_word(struct ax8817x_info *ax_info, __u8 phy,
__u8 indx, __u16 regd)
{
deverr(ax_info, "write_mii_word - not implemented!");
return 0;
}
static int mdio_read(struct net_device *dev, int phy_id, int loc)
{
struct ax8817x_info *ax_info = dev->priv;
int res;
devdbg(ax_info, "mdio_read: phy_id=%02x, loc=%02x", phy_id, loc);
read_mii_word(ax_info, phy_id, loc, (u16 *) & res);
return res & 0xffff;
}
static void mdio_write(struct net_device *dev, int phy_id, int loc,
int val)
{
struct ax8817x_info *ax_info = dev->priv;
devdbg(ax_info, "mdio_write: phy_id=%02x, loc=%02x", phy_id, loc);
write_mii_word(ax_info, phy_id, loc, val);
}
static int ax8817x_ethtool_ioctl(struct net_device *net, void __user *uaddr)
{
struct ax8817x_info *ax_info;
int cmd;
ax_info = net->priv;
if (get_user(cmd, (int *) uaddr))
return -EFAULT;
switch (cmd) {
case ETHTOOL_GDRVINFO:{
struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
strncpy(info.driver, DRIVER_NAME,
sizeof(info.driver) - 1);
strncpy(info.version, DRIVER_VERSION,
sizeof(info.version) - 1);
usb_make_path(ax_info->usb, info.bus_info,sizeof info.bus_info);
if (copy_to_user(uaddr, &info, sizeof(info)))
return -EFAULT;
return 0;
}
case ETHTOOL_GSET:{
struct ethtool_cmd ecmd;
mii_ethtool_gset(&ax_info->mii, &ecmd);
if (copy_to_user(uaddr, &ecmd, sizeof(ecmd)))
return -EFAULT;
return 0;
}
case ETHTOOL_SSET:{
int r;
struct ethtool_cmd ecmd;
if (copy_from_user(&ecmd, uaddr, sizeof(ecmd)))
return -EFAULT;
r = mii_ethtool_sset(&ax_info->mii, &ecmd);
return r;
}
case ETHTOOL_NWAY_RST:{
return mii_nway_restart(&ax_info->mii);
}
case ETHTOOL_GLINK:{
struct ethtool_value edata = { ETHTOOL_GLINK };
edata.data = mii_link_ok(&ax_info->mii);
if (copy_to_user(uaddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
case ETHTOOL_GMSGLVL:{
struct ethtool_value edata = { ETHTOOL_GMSGLVL };
edata.data = ax_info->msg_level;
if (copy_to_user(uaddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
case ETHTOOL_SMSGLVL:{
struct ethtool_value edata;
if (copy_from_user(&edata, uaddr, sizeof(edata)))
return -EFAULT;
ax_info->msg_level = edata.data;
return 0;
}
}
return -EOPNOTSUPP;
}
static int ax8817x_ioctl(struct net_device *net, struct ifreq *ifr,
int cmd)
{
struct ax8817x_info *ax_info;
ax_info = net->priv;
if (cmd == SIOCETHTOOL)
return ax8817x_ethtool_ioctl(net, (void __user *) ifr->ifr_data);
return generic_mii_ioctl(&ax_info->mii, (struct mii_ioctl_data *) &ifr->ifr_data, cmd, NULL);
}
static int ax8817x_net_init(struct net_device *net)
{
struct ax8817x_info *ax_info = (struct ax8817x_info *) net->priv;
u8 buf[6];
u16 *buf16 = (u16 *) buf;
int ret;
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_RX_CTL, 0x80, 0, 0, buf);
if (ret < 0) {
return ret;
}
memset(buf, 0, 6);
/* Get the MAC address */
ret = ax_read_cmd(ax_info, AX_CMD_READ_NODE_ID, 0, 0, 6, buf);
if (ret < 0) {
return ret;
}
memcpy(net->dev_addr, buf, 6);
/* Get the PHY id */
ret = ax_read_cmd(ax_info, AX_CMD_READ_PHY_ID, 0, 0, 2, buf);
if (ret < 0) {
return ret;
} else if (ret < 2) {
/* this should always return 2 bytes */
return -EIO;
}
/* Reset the PHY, and drop it into auto-negotiation mode */
ax_info->phy_id = buf[1];
ax_info->phy_state = AX_PHY_STATE_INITIALIZING;
ret = ax_write_cmd(ax_info, AX_CMD_SET_SW_MII, 0, 0, 0, &buf);
if (ret < 0) {
return ret;
}
*buf16 = cpu_to_le16(BMCR_RESET);
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_MII_REG,
ax_info->phy_id, MII_BMCR, 2, buf16);
if (ret < 0) {
return ret;
}
/* Advertise that we can do full-duplex pause */
*buf16 = cpu_to_le16(ADVERTISE_ALL | ADVERTISE_CSMA | 0x0400);
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_MII_REG,
ax_info->phy_id, MII_ADVERTISE, 2, buf16);
if (ret < 0) {
return ret;
}
*buf16 = cpu_to_le16(BMCR_ANENABLE | BMCR_ANRESTART);
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_MII_REG,
ax_info->phy_id, MII_BMCR, 2, buf16);
if (ret < 0) {
return ret;
}
ret = ax_write_cmd(ax_info, AX_CMD_SET_HW_MII, 0, 0, 0, &buf);
if (ret < 0) {
return ret;
}
net->open = ax8817x_open;
net->stop = ax8817x_stop;
net->hard_start_xmit = ax8817x_start_xmit;
net->tx_timeout = ax8817x_tx_timeout;
net->watchdog_timeo = AX_TIMEOUT_TX;
net->get_stats = ax8817x_stats;
net->do_ioctl = ax8817x_ioctl;
net->set_multicast_list = ax8817x_set_multicast;
return 0;
}
static int ax8817x_bind(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *usb = interface_to_usbdev(intf);
struct ax8817x_info *ax_info;
struct net_device *net;
int i, ret;
unsigned long gpio_bits = id->driver_info;
u8 buf[2];
/* Allocate the URB lists along with the device info struct */
ax_info = kmalloc(sizeof(struct ax8817x_info) +
n_rx_urbs * sizeof(struct urb *), GFP_KERNEL);
if (ax_info == NULL) {
err("%s: Failed ax alloc\n", __FUNCTION__);
goto exit_err;
}
memset(ax_info, 0, sizeof(struct ax8817x_info) +
n_rx_urbs * sizeof(struct urb *));
ax_info->drv_state = AX_DRV_STATE_INITIALIZING;
ax_info->rx_urbs = (struct urb **) (ax_info + 1);
ax_info->usb = usb;
/* Set up the control URB queue */
INIT_LIST_HEAD(&ax_info->ctl_queue);
spin_lock_init(&ax_info->ctl_lock);
ax_info->ctl_urb = usb_alloc_urb(0, GFP_KERNEL);
if (ax_info->ctl_urb == NULL) {
goto exit_err_free_ax;
}
/* Toggle the GPIOs in a manufacturer/model specific way */
for (i = 2; i >= 0; i--) {
ret = ax_write_cmd(ax_info, AX_CMD_WRITE_GPIOS,
(gpio_bits >> (i * 8)) & 0xff, 0, 0,
buf);
if (ret < 0) {
goto exit_err_free_ax;
}
wait_ms(5);
}
/* Set up the net device */
net = alloc_etherdev(0);
if (net == NULL) {
err("%s: Failed net alloc\n", __FUNCTION__);
goto exit_err_free_ax;
}
ax_info->net = net;
SET_MODULE_OWNER(net);
net->init = ax8817x_net_init;
net->priv = ax_info;
SET_NETDEV_DEV(net, &intf->dev);
ret = register_netdev(net);
if (ret < 0) {
err("%s: Failed net init (%d)\n", __FUNCTION__, ret);
goto exit_err_free_net;
}
/* Setup mii structure */
ax_info->mii.dev = net;
ax_info->mii.mdio_read = mdio_read;
ax_info->mii.mdio_write = mdio_write;
ax_info->mii.phy_id = ax_info->phy_id;
ax_info->mii.phy_id_mask = 0x3f;
ax_info->mii.reg_num_mask = 0x1f;
/* Set up the interrupt URB, and start PHY state monitoring */
ax_info->int_urb = usb_alloc_urb(0, GFP_KERNEL);
if (ax_info->int_urb == NULL) {
goto exit_err_unregister_net;
}
ax_info->int_buf = kmalloc(8, GFP_KERNEL);
if (ax_info->int_buf == NULL) {
goto exit_err_free_int_urb;
}
ax_info->phy_req.data = kmalloc(2, GFP_KERNEL);
if (ax_info->phy_req.data == NULL) {
goto exit_err_free_int_buf;
}
usb_fill_int_urb(ax_info->int_urb, usb, usb_rcvintpipe(usb, 1),
ax_info->int_buf, 8, ax_int_callback, ax_info,
usb->speed == USB_SPEED_HIGH? 8: 100);
ret = usb_submit_urb(ax_info->int_urb, GFP_ATOMIC);
if (ret < 0) {
err("%s: Failed int URB submit (%d)\n", __FUNCTION__, ret);
goto exit_err_free_phy_buf;
}
ax_info->drv_state = AX_DRV_STATE_RUNNING;
usb_set_intfdata(intf, ax_info);
return 0;
exit_err_free_phy_buf:
kfree(ax_info->phy_req.data);
exit_err_free_int_buf:
kfree(ax_info->int_buf);
exit_err_free_int_urb:
usb_free_urb(ax_info->int_urb);
exit_err_unregister_net:
ax_info->drv_state = AX_DRV_STATE_EXITING;
unregister_netdev(net);
exit_err_free_net:
kfree(net);
exit_err_free_ax:
if (ax_info->ctl_urb != NULL) {
/* no need to unlink, since there should not be any ctl URBs
pending at this point */
usb_free_urb(ax_info->ctl_urb);
}
kfree(ax_info);
exit_err:
err("%s: Failed to initialize\n", __FUNCTION__);
return -EIO;
}
static void ax8817x_disconnect(struct usb_interface *intf)
{
struct ax8817x_info *ax_info = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
if (ax_info) {
ax_info->drv_state = AX_DRV_STATE_EXITING;
if (ax_info->int_urb != NULL) {
usb_unlink_urb(ax_info->int_urb);
usb_free_urb(ax_info->int_urb);
kfree(ax_info->int_buf);
}
unregister_netdev(ax_info->net);
/* XXX: hmmm... need to go through and clear out the ctl queue, too... */
if (ax_info->ctl_urb != NULL) {
usb_unlink_urb(ax_info->ctl_urb);
usb_free_urb(ax_info->ctl_urb);
}
kfree(ax_info);
}
}
static struct usb_driver ax8817x_driver = {
.owner = THIS_MODULE,
.name = DRIVER_NAME,
.probe = ax8817x_bind,
.disconnect = ax8817x_disconnect,
.id_table = ax8817x_id_table,
};
static int __init ax8817x_init(void)
{
int ret;
if (n_rx_urbs < 1)
n_rx_urbs = AX_RX_URBS_DEFAULT;
ret = usb_register(&ax8817x_driver);
if (ret < 0) {
err("%s: Failed to register\n", __FUNCTION__);
} else {
info(DRIVER_DESC " " DRIVER_VERSION);
}
return ret;
}
static void __exit ax8817x_exit(void)
{
usb_deregister(&ax8817x_driver);
}
module_init(ax8817x_init);
module_exit(ax8817x_exit);
drivers/usb/serial/digi_acceleport.c
View file @ 9559f65d
......@@ -594,8 +594,6 @@ static inline long cond_wait_interruptible_timeout_irqrestore(
timeout = schedule_timeout(timeout);
set_current_state( TASK_RUNNING );
remove_wait_queue( q, &wait );
return( timeout );
......
drivers/usb/serial/ftdi_sio.c
View file @ 9559f65d
......@@ -17,6 +17,11 @@
* See http://ftdi-usb-sio.sourceforge.net for upto date testing info
* and extra documentation
*
* (21/Sep/2003) Ian Abbott
* Added VID/PID for Omnidirectional Control Technology US101 USB to
* RS-232 adapter (also rebadged as Dick Smith Electronics XH6381).
* VID/PID supplied by Donald Gordon.
*
* (19/Aug/2003) Ian Abbott
* Freed urb's transfer buffer in write bulk callback.
* Omitted some paranoid checks in write bulk callback that don't matter.
......@@ -334,6 +339,7 @@ static struct usb_device_id id_table_8U232AM [] = {
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0, 0x3ff) },
{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0, 0x3ff) },
{ } /* Terminating entry */
};
......@@ -406,6 +412,7 @@ static struct usb_device_id id_table_FT232BM [] = {
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_7_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(SEALEVEL_VID, SEALEVEL_2803_8_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(IDTECH_VID, IDTECH_IDT1221U_PID, 0x400, 0xffff) },
{ USB_DEVICE_VER(OCT_VID, OCT_US101_PID, 0x400, 0xffff) },
{ } /* Terminating entry */
};
......@@ -491,6 +498,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_7_PID) },
{ USB_DEVICE(SEALEVEL_VID, SEALEVEL_2803_8_PID) },
{ USB_DEVICE(IDTECH_VID, IDTECH_IDT1221U_PID) },
{ USB_DEVICE(OCT_VID, OCT_US101_PID) },
{ USB_DEVICE_VER(FTDI_VID, FTDI_HE_TIRA1_PID, 0x400, 0xffff) },
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID) },
{ } /* Terminating entry */
......
drivers/usb/serial/ftdi_sio.h
View file @ 9559f65d
......@@ -133,6 +133,13 @@
#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
/*
* Definitions for Omnidirectional Control Technology, Inc. devices
*/
#define OCT_VID 0x0B39 /* OCT vendor ID */
/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
......
drivers/usb/serial/usb-serial.c
View file @ 9559f65d
......@@ -1019,10 +1019,10 @@ int usb_serial_probe(struct usb_interface *interface,
retval = type->probe (serial, id_pattern);
module_put(type->owner);
if (retval < 0) {
if (retval) {
dbg ("sub driver rejected device");
kfree (serial);
return -ENODEV;
return retval;
}
}
......
drivers/usb/storage/transport.c
View file @ 9559f65d
......@@ -1074,7 +1074,6 @@ static int usb_stor_reset_common(struct us_data *us,
up(&us->dev_semaphore);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ*6);
set_current_state(TASK_RUNNING);
down(&us->dev_semaphore);
if (test_bit(US_FLIDX_DISCONNECTING, &us->flags)) {
US_DEBUGP("Reset interrupted by disconnect\n");
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7