firmware: qcom: scm: Add HDCP Support

HDCP driver needs to check if secure environment supports HDCP.  If it's
supported, then it requires to program some registers through SCM.
Add qcom_scm_hdcp_available and qcom_scm_hdcp_req to support these
requirements.
Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>

drivers/firmware/qcom_scm-32.c

-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -478,3 +478,26 @@ void __qcom_scm_cpu_power_down(u32 flags)
 	qcom_scm_call_atomic1(QCOM_SCM_SVC_BOOT, QCOM_SCM_CMD_TERMINATE_PC,
 			flags & QCOM_SCM_FLUSH_FLAG_MASK);
 }
+
+int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id)
+{
+	int ret;
+	u32 svc_cmd = (svc_id << 10) | cmd_id;
+	u32 ret_val = 0;
+
+	ret = qcom_scm_call(QCOM_SCM_SVC_INFO, QCOM_IS_CALL_AVAIL_CMD, &svc_cmd,
+			sizeof(svc_cmd), &ret_val, sizeof(ret_val));
+	if (ret)
+		return ret;
+
+	return ret_val;
+}
+
+int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+	if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+		return -ERANGE;
+
+	return qcom_scm_call(QCOM_SCM_SVC_HDCP, QCOM_SCM_CMD_HDCP,
+		req, req_cnt * sizeof(*req), resp, sizeof(*resp));
+}

drivers/firmware/qcom_scm.c

-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2010,2015, The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -64,3 +64,33 @@ void qcom_scm_cpu_power_down(u32 flags)
 	__qcom_scm_cpu_power_down(flags);
 }
 EXPORT_SYMBOL(qcom_scm_cpu_power_down);
+
+/**
+ * qcom_scm_hdcp_available() - Check if secure environment supports HDCP.
+ *
+ * Return true if HDCP is supported, false if not.
+ */
+bool qcom_scm_hdcp_available(void)
+{
+	int ret;
+
+	ret = __qcom_scm_is_call_available(QCOM_SCM_SVC_HDCP,
+		QCOM_SCM_CMD_HDCP);
+
+	return (ret > 0) ? true : false;
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_available);
+
+/**
+ * qcom_scm_hdcp_req() - Send HDCP request.
+ * @req: HDCP request array
+ * @req_cnt: HDCP request array count
+ * @resp: response buffer passed to SCM
+ *
+ * Write HDCP register(s) through SCM.
+ */
+int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
+{
+	return __qcom_scm_hdcp_req(req, req_cnt, resp);
+}
+EXPORT_SYMBOL(qcom_scm_hdcp_req);

drivers/firmware/qcom_scm.h

-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 and
@@ -27,6 +27,15 @@ extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 #define QCOM_SCM_CMD_CORE_HOTPLUGGED	0x10
 extern void __qcom_scm_cpu_power_down(u32 flags);
 
+#define QCOM_SCM_SVC_INFO		0x6
+#define QCOM_IS_CALL_AVAIL_CMD		0x1
+extern int __qcom_scm_is_call_available(u32 svc_id, u32 cmd_id);
+
+#define QCOM_SCM_SVC_HDCP		0x11
+#define QCOM_SCM_CMD_HDCP		0x01
+extern int __qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+		u32 *resp);
+
 /* common error codes */
 #define QCOM_SCM_ENOMEM		-5
 #define QCOM_SCM_EOPNOTSUPP	-4

include/linux/qcom_scm.h

-/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+/* Copyright (c) 2010-2015, The Linux Foundation. All rights reserved.
  * Copyright (C) 2015 Linaro Ltd.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -16,6 +16,17 @@
 extern int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
 extern int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus);
 
+#define QCOM_SCM_HDCP_MAX_REQ_CNT	5
+
+struct qcom_scm_hdcp_req {
+	u32 addr;
+	u32 val;
+};
+
+extern bool qcom_scm_hdcp_available(void);
+extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
+		u32 *resp);
+
 #define QCOM_SCM_CPU_PWR_DOWN_L2_ON	0x0
 #define QCOM_SCM_CPU_PWR_DOWN_L2_OFF	0x1