[TIGON3]: Always force PHY reset after major hw config changes.

drivers/net/tg3.c

@@ -782,7 +782,7 @@ static void tg3_frob_aux_power(struct tg3 *tp)
 	}
 }
 
-static int tg3_setup_phy(struct tg3 *);
+static int tg3_setup_phy(struct tg3 *, int);
 
 static int tg3_set_power_state(struct tg3 *tp, int state)
 {
@@ -849,7 +849,7 @@ static int tg3_set_power_state(struct tg3 *tp, int state)
 		tp->link_config.speed = SPEED_10;
 		tp->link_config.duplex = DUPLEX_HALF;
 		tp->link_config.autoneg = AUTONEG_ENABLE;
-		tg3_setup_phy(tp);
+		tg3_setup_phy(tp, 0);
 	}
 
 	pci_read_config_word(tp->pdev, pm + PCI_PM_PMC, &power_caps);
@@ -1212,7 +1212,7 @@ static int tg3_init_5401phy_dsp(struct tg3 *tp)
 	return err;
 }
 
-static int tg3_setup_copper_phy(struct tg3 *tp)
+static int tg3_setup_copper_phy(struct tg3 *tp, int force_reset)
 {
 	int current_link_up;
 	u32 bmsr, dummy;
@@ -1245,8 +1245,10 @@ static int tg3_setup_copper_phy(struct tg3 *tp)
 		tg3_readphy(tp, MII_BMSR, &bmsr);
 		tg3_readphy(tp, MII_BMSR, &bmsr);
 		if (!(bmsr & BMSR_LSTATUS))
-			tg3_phy_reset(tp, 1);
+			force_reset = 1;
 	}
+	if (force_reset)
+		tg3_phy_reset(tp, 1);
 
 	if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
 		tg3_readphy(tp, MII_BMSR, &bmsr);
@@ -1775,7 +1777,7 @@ static int tg3_fiber_aneg_smachine(struct tg3 *tp,
 	return ret;
 }
 
-static int tg3_setup_fiber_phy(struct tg3 *tp)
+static int tg3_setup_fiber_phy(struct tg3 *tp, int force_reset)
 {
 	u32 orig_pause_cfg;
 	u16 orig_active_speed;
@@ -1980,14 +1982,14 @@ static int tg3_setup_fiber_phy(struct tg3 *tp)
 	return 0;
 }
 
-static int tg3_setup_phy(struct tg3 *tp)
+static int tg3_setup_phy(struct tg3 *tp, int force_reset)
 {
 	int err;
 
 	if (tp->phy_id == PHY_ID_SERDES) {
-		err = tg3_setup_fiber_phy(tp);
+		err = tg3_setup_fiber_phy(tp, force_reset);
 	} else {
-		err = tg3_setup_copper_phy(tp);
+		err = tg3_setup_copper_phy(tp, force_reset);
 	}
 
 	if (tp->link_config.active_speed == SPEED_1000 &&
@@ -2350,7 +2352,7 @@ static int tg3_poll(struct net_device *netdev, int *budget)
 		if (sblk->status & SD_STATUS_LINK_CHG) {
 			sblk->status = SD_STATUS_UPDATED |
 				(sblk->status & ~SD_STATUS_LINK_CHG);
-			tg3_setup_phy(tp);
+			tg3_setup_phy(tp, 0);
 		}
 	}
 
@@ -4986,7 +4988,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 	 */
 	tw32_f(MAC_LOW_WMARK_MAX_RX_FRAME, 2);
 
-	err = tg3_setup_phy(tp);
+	err = tg3_setup_phy(tp, 1);
 	if (err)
 		return err;
 
@@ -5168,7 +5170,7 @@ static void tg3_timer(unsigned long __opaque)
 				phy_event = 1;
 
 			if (phy_event)
-				tg3_setup_phy(tp);
+				tg3_setup_phy(tp, 0);
 		} else if (tp->tg3_flags & TG3_FLAG_POLL_SERDES) {
 			u32 mac_stat = tr32(MAC_STATUS);
 			int need_setup = 0;
@@ -5188,7 +5190,7 @@ static void tg3_timer(unsigned long __opaque)
 				udelay(40);
 				tw32_f(MAC_MODE, tp->mac_mode);
 				udelay(40);
-				tg3_setup_phy(tp);
+				tg3_setup_phy(tp, 0);
 			}
 		}
 
@@ -5885,7 +5887,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		tp->link_config.duplex = cmd->duplex;
   	}
   
-	tg3_setup_phy(tp);
+	tg3_setup_phy(tp, 1);
 	spin_unlock(&tp->tx_lock);
 	spin_unlock_irq(&tp->lock);