Commit 979d859d authored by Jiri Kosina's avatar Jiri Kosina

Merge branch 'for-5.4/ish' into for-linus

- fixes for handling power management for intel-ish devices with NO_D3 flag
  set, from Zhang Lixu
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parents 98656d50 fc19a57d
......@@ -78,5 +78,6 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id);
struct ishtp_device *ish_dev_init(struct pci_dev *pdev);
int ish_hw_start(struct ishtp_device *dev);
void ish_device_disable(struct ishtp_device *dev);
int ish_disable_dma(struct ishtp_device *dev);
#endif /* _ISHTP_HW_ISH_H_ */
......@@ -672,7 +672,7 @@ irqreturn_t ish_irq_handler(int irq, void *dev_id)
*
* Return: 0 for success else error code.
*/
static int ish_disable_dma(struct ishtp_device *dev)
int ish_disable_dma(struct ishtp_device *dev)
{
unsigned int dma_delay;
......
......@@ -14,6 +14,7 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/suspend.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#define CREATE_TRACE_POINTS
......@@ -98,6 +99,11 @@ static const struct pci_device_id ish_invalid_pci_ids[] = {
{}
};
static inline bool ish_should_enter_d0i3(struct pci_dev *pdev)
{
return !pm_suspend_via_firmware() || pdev->device == CHV_DEVICE_ID;
}
/**
* ish_probe() - PCI driver probe callback
* @pdev: pci device
......@@ -148,7 +154,6 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
/* mapping IO device memory */
hw->mem_addr = pcim_iomap_table(pdev)[0];
ishtp->pdev = pdev;
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
/* request and enable interrupt */
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
......@@ -185,7 +190,6 @@ static void ish_remove(struct pci_dev *pdev)
struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
ishtp_bus_remove_all_clients(ishtp_dev, false);
pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
ish_device_disable(ishtp_dev);
}
......@@ -207,17 +211,13 @@ static void __maybe_unused ish_resume_handler(struct work_struct *work)
{
struct pci_dev *pdev = to_pci_dev(ish_resume_device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
uint32_t fwsts;
int ret;
/* Get ISH FW status */
fwsts = IPC_GET_ISH_FWSTS(dev->ops->get_fw_status(dev));
/* Check the NO_D3 flag to distinguish the resume paths */
if (pdev->dev_flags & PCI_DEV_FLAGS_NO_D3) {
pdev->dev_flags &= ~PCI_DEV_FLAGS_NO_D3;
disable_irq_wake(pdev->irq);
/*
* If currently, in ISH FW, sensor app is loaded or beyond that,
* it means ISH isn't powered off, in this case, send a resume message.
*/
if (fwsts >= FWSTS_SENSOR_APP_LOADED) {
ishtp_send_resume(dev);
/* Waiting to get resume response */
......@@ -225,16 +225,20 @@ static void __maybe_unused ish_resume_handler(struct work_struct *work)
ret = wait_event_interruptible_timeout(dev->resume_wait,
!dev->resume_flag,
msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
}
/*
* If in ISH FW, sensor app isn't loaded yet, or no resume response.
* That means this platform is not S0ix compatible, or something is
* wrong with ISH FW. So on resume, full reboot of ISH processor will
* happen, so need to go through init sequence again.
* If the flag is not cleared, something is wrong with ISH FW.
* So on resume, need to go through init sequence again.
*/
if (dev->resume_flag)
ish_init(dev);
} else {
/*
* Resume from the D3, full reboot of ISH processor will happen,
* so need to go through init sequence again.
*/
ish_init(dev);
}
}
/**
......@@ -250,10 +254,10 @@ static int __maybe_unused ish_suspend(struct device *device)
struct pci_dev *pdev = to_pci_dev(device);
struct ishtp_device *dev = pci_get_drvdata(pdev);
enable_irq_wake(pdev->irq);
if (ish_should_enter_d0i3(pdev)) {
/*
* If previous suspend hasn't been asnwered then ISH is likely dead,
* don't attempt nested notification
* If previous suspend hasn't been asnwered then ISH is likely
* dead, don't attempt nested notification
*/
if (dev->suspend_flag)
return 0;
......@@ -268,6 +272,26 @@ static int __maybe_unused ish_suspend(struct device *device)
!dev->suspend_flag,
msecs_to_jiffies(25));
if (dev->suspend_flag) {
/*
* It looks like FW halt, clear the DMA bit, and put
* ISH into D3, and FW would reset on resume.
*/
ish_disable_dma(dev);
} else {
/* Set the NO_D3 flag, the ISH would enter D0i3 */
pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3;
enable_irq_wake(pdev->irq);
}
} else {
/*
* Clear the DMA bit before putting ISH into D3,
* or ISH FW would reset automatically.
*/
ish_disable_dma(dev);
}
return 0;
}
......@@ -288,7 +312,6 @@ static int __maybe_unused ish_resume(struct device *device)
ish_resume_device = device;
dev->resume_flag = 1;
disable_irq_wake(pdev->irq);
schedule_work(&resume_work);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment