Skip to content

L
linux
Commit 99035860 authored by Ralf Bächle's avatar Ralf Bächle Committed by Linus Torvalds
Browse files
Options

[PATCH] mips: aMD Alchemy update 

Update for the AMD Alchemy SOCs, platforms based on those and drivers specific
to the SOC and platforms.
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent ae6e1719
Expand all Show whitespace changes
Inline Side-by-side
Showing with 6164 additions and 840 deletions
arch/mips/Kconfig
View file @ 99035860
......@@ -606,6 +606,7 @@ config MIPS_XXS1500
config MIPS_MTX1
bool "4G Systems MTX-1 board"
depends on SOC_AU1500
select HW_HAS_PCI
select DMA_NONCOHERENT
endchoice
......
arch/mips/au1000/common/au1xxx_irqmap.c
View file @ 99035860
......@@ -25,6 +25,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/irq.h>
......
arch/mips/au1000/common/cputable.c
View file @ 99035860
......@@ -11,8 +11,6 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/config.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/threads.h>
......
arch/mips/au1000/common/dbdma.c
View file @ 99035860
......@@ -29,7 +29,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/sched.h>
......@@ -55,7 +55,7 @@
* functions. The drivers allocate the data buffers and assign them
* to the descriptors.
*/
static spinlock_t au1xxx_dbdma_spin_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
/* I couldn't find a macro that did this......
*/
......@@ -370,7 +370,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t), GFP_KERNEL);
if (desc_base == 0)
return 0;
......@@ -381,7 +381,7 @@ au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
if ((desc_base = kmalloc(i, GFP_KERNEL)) == 0)
if ((desc_base = (u32)kmalloc(i, GFP_KERNEL)) == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
......
arch/mips/au1000/common/dma.c
View file @ 99035860
......@@ -7,6 +7,7 @@
* Copyright 2000 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* stevel@mvista.com or source@mvista.com
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -29,7 +30,7 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
......@@ -61,7 +62,7 @@
*/
spinlock_t au1000_dma_spin_lock = SPIN_LOCK_UNLOCKED;
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
{.dev_id = -1,},
......
arch/mips/au1000/common/irq.c
View file @ 99035860
......@@ -86,7 +86,7 @@ void (*board_init_irq)(void);
extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
#endif
static spinlock_t irq_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_SPINLOCK(irq_lock);
static unsigned int startup_irq(unsigned int irq_nr)
......
arch/mips/au1000/common/pci.c
View file @ 99035860
......@@ -78,10 +78,13 @@ static int __init au1x_pci_setup(void)
#ifdef CONFIG_DMA_NONCOHERENT
/*
* Set the NC bit in controller for pre-AC silicon
* Set the NC bit in controller for Au1500 pre-AC silicon
*/
u32 prid = read_c0_prid();
if ( (prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
printk("Non-coherent PCI accesses enabled\n");
}
#endif
set_io_port_base(virt_io_addr);
......
arch/mips/au1000/common/platform.c
View file @ 99035860
......@@ -7,7 +7,6 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/config.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/init.h>
......
arch/mips/au1000/common/power.c
View file @ 99035860
......@@ -66,7 +66,7 @@ extern void local_enable_irq(unsigned int irq_nr);
#define ACPI_SLEEP 21
static spinlock_t pm_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_SPINLOCK(pm_lock);
/* We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
......
arch/mips/au1000/common/sleeper.S
View file @ 99035860
......@@ -9,7 +9,6 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
......
arch/mips/au1000/common/time.c
View file @ 99035860
......@@ -69,7 +69,7 @@ extern void startup_match20_interrupt(void);
static unsigned long last_pc0, last_match20;
#endif
static spinlock_t time_lock = SPIN_LOCK_UNLOCKED;
static DEFINE_SPINLOCK(time_lock);
static inline void ack_r4ktimer(unsigned long newval)
{
......@@ -304,8 +304,7 @@ unsigned long cal_r4koff(void)
/* This is for machines which generate the exact clock. */
#define USECS_PER_JIFFY (1000000/HZ)
#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff)
#define USECS_PER_JIFFY_FRAC (0x100000000LL*1000000/HZ&0xffffffff)
static unsigned long
div64_32(unsigned long v1, unsigned long v2, unsigned long v3)
......@@ -407,10 +406,6 @@ void au1xxx_timer_setup(struct irqaction *irq)
r4k_cur = (read_c0_count() + r4k_offset);
write_c0_compare(r4k_cur);
/* no RTC on the pb1000 */
xtime.tv_sec = 0;
//xtime.tv_usec = 0;
#ifdef CONFIG_PM
/*
* setup counter 0, since it keeps ticking after a
......
arch/mips/au1000/csb250/board_setup.c
View file @ 99035860
......@@ -45,16 +45,6 @@
#include <asm/au1000.h>
#include <asm/csb250.h>
#ifdef CONFIG_USB_OHCI
// Enable the workaround for the OHCI DoneHead
// register corruption problem.
#define CONFIG_AU1000_OHCI_FIX
#endif
#ifdef CONFIG_RTC
extern struct rtc_ops csb250_rtc_ops;
#endif
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int csb250_pci_idsel(unsigned int devsel, int assert);
......@@ -203,7 +193,6 @@ void __init board_setup(void)
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
#ifdef CONFIG_RTC
rtc_ops = &csb250_rtc_ops;
// Enable the RTC if not already enabled
if (!(au_readl(0xac000028) & 0x20)) {
printk("enabling clock ...\n");
......
arch/mips/au1000/db1x00/mirage_ts.c
View file @ 99035860
......@@ -42,6 +42,7 @@
#include <linux/proc_fs.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/wait.h>
#include <asm/segment.h>
#include <asm/irq.h>
......@@ -147,10 +148,7 @@ static int ts_thread(void *id)
ts = wm97xx_ts_get_handle(0);
/* proceed only after everybody is ready */
while ( ! wm97xx_ts_ready(ts) ) {
/* give a little time for initializations to complete */
interruptible_sleep_on_timeout(&pendown_wait, HZ / 4);
}
wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4);
/* board-specific calibration */
wm97xx_ts_set_cal(ts,
......
arch/mips/au1000/hydrogen3/board_setup.c
View file @ 99035860
......@@ -45,8 +45,6 @@
#include <asm/pgtable.h>
#include <asm/au1000.h>
extern struct rtc_ops no_rtc_ops;
void board_reset (void)
{
}
......@@ -55,8 +53,6 @@ void __init board_setup(void)
{
u32 pin_func;
rtc_ops = &no_rtc_ops;
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
......
arch/mips/au1000/mtx-1/board_setup.c
View file @ 99035860
......@@ -34,24 +34,24 @@
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/mc146818rtc.h>
#include <linux/delay.h>
#include <asm/cpu.h>
#include <asm/bootinfo.h>
#include <asm/irq.h>
#include <asm/keyboard.h>
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/mach-au1x00/au1000.h>
extern struct rtc_ops no_rtc_ops;
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
au_writel(0x00000000, 0xAE00001C);
}
void __init board_setup(void)
{
rtc_ops = &no_rtc_ops;
#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
#ifdef CONFIG_AU1X00_USB_DEVICE
// 2nd USB port is USB device
......
arch/mips/au1000/mtx-1/init.c
View file @ 99035860
......@@ -28,17 +28,15 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/bootmem.h>
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
#include <linux/config.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/sched.h>
int prom_argc;
char **prom_argv, **prom_envp;
......@@ -50,25 +48,24 @@ const char *get_system_type(void)
return "MTX-1";
}
int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = argc;
prom_argv = argv;
prom_envp = envp;
prom_argc = fw_arg0;
prom_argv = (char **) fw_arg1;
prom_envp = (char **) fw_arg2;
mips_machgroup = MACH_GROUP_ALCHEMY;
mips_machtype = MACH_MTX1; /* set the platform # */
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str) {
if (!memsize_str)
memsize = 0x04000000;
} else {
else
memsize = simple_strtol(memsize_str, NULL, 0);
}
add_memory_region(0, memsize, BOOT_MEM_RAM);
return 0;
}
arch/mips/au1000/mtx-1/irqmap.c
View file @ 99035860
......@@ -45,12 +45,14 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
#include <asm/mach-au1x00/au1000.h>
/* Need to define this.
*/
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ 0. 0. 0}
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
};
int au1xxx_nr_irqs = 0;
int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
arch/mips/au1000/pb1000/board_setup.c
View file @ 99035860
......@@ -37,16 +37,8 @@
#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/pgtable.h>
#include <asm/au1000.h>
#include <asm/pb1000.h>
#ifdef CONFIG_USB_OHCI
// Enable the workaround for the OHCI DoneHead
// register corruption problem.
#define CONFIG_AU1000_OHCI_FIX
^^^^^^^^^^^^^^^^^^^^^^
!!! I shall not define symbols starting with CONFIG_ !!!
#endif
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1000.h>
void board_reset (void)
{
......
arch/mips/au1000/pb1000/irqmap.c
View file @ 99035860
......@@ -45,7 +45,7 @@
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/au1000.h>
#include <asm/mach-au1x00/au1000.h>
au1xxx_irq_map_t au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
......
arch/mips/au1000/pb1100/board_setup.c
View file @ 99035860
......@@ -40,14 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
#ifdef CONFIG_USB_OHCI
// Enable the workaround for the OHCI DoneHead
// register corruption problem.
#define CONFIG_AU1000_OHCI_FIX
^^^^^^^^^^^^^^^^^^^^^^
!!! I shall not define symbols starting with CONFIG_ !!!
#endif
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
......
arch/mips/au1000/pb1500/board_setup.c
View file @ 99035860
......@@ -40,14 +40,6 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
#ifdef CONFIG_USB_OHCI
// Enable the workaround for the OHCI DoneHead
// register corruption problem.
#define CONFIG_AU1000_OHCI_FIX
^^^^^^^^^^^^^^^^^^^^^^
!!! I shall not define symbols starting with CONFIG_ !!!
#endif
void board_reset (void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
......
arch/mips/au1000/pb1550/board_setup.c
View file @ 99035860
......@@ -27,7 +27,6 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ioport.h>
......
arch/mips/configs/db1000_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:11:56 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,11 +101,11 @@ CONFIG_MIPS_DB1000=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -132,7 +132,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -151,7 +150,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
#
......@@ -200,10 +198,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -217,6 +217,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -293,8 +294,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -426,6 +425,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -479,7 +479,6 @@ CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -515,12 +514,14 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -533,11 +534,25 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -685,6 +700,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -727,6 +747,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/db1100_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:11:56 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,11 +101,11 @@ CONFIG_MIPS_DB1100=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -132,7 +132,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -149,7 +148,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
#
......@@ -198,10 +196,12 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -215,6 +215,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -291,8 +292,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -424,6 +423,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
#
......@@ -474,7 +474,6 @@ CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -510,12 +509,14 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -528,11 +529,25 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -680,6 +695,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -722,6 +742,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/db1500_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:11:56 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:01 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,12 +101,12 @@ CONFIG_MIPS_DB1500=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -133,7 +133,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -154,7 +153,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
......@@ -234,6 +232,7 @@ CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
......@@ -252,6 +251,7 @@ CONFIG_MTD_DB1X00_USER=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
......@@ -282,12 +282,14 @@ CONFIG_MTD_DB1X00_USER=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -301,6 +303,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -402,8 +405,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -557,6 +558,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -609,7 +611,6 @@ CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -645,6 +646,8 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -705,6 +708,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
......@@ -714,6 +718,10 @@ CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
......@@ -769,7 +777,6 @@ CONFIG_USB_HIDINPUT=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
......@@ -778,6 +785,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
#
# USB ATM/DSL drivers
......@@ -788,6 +796,16 @@ CONFIG_USB_HIDINPUT=y
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -937,6 +955,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -979,6 +1002,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/db1550_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:11:57 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:02 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,12 +101,12 @@ CONFIG_MIPS_DB1550=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -133,7 +133,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -154,7 +153,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
......@@ -252,6 +250,7 @@ CONFIG_MTD_DB1550_USER=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
......@@ -268,6 +267,7 @@ CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_AU1550=m
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
#
# Parallel port support
......@@ -286,11 +286,13 @@ CONFIG_MTD_NAND_AU1550=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -304,6 +306,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -433,8 +436,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -596,6 +597,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -649,7 +651,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -685,6 +686,8 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -698,11 +701,25 @@ CONFIG_SYNCLINK_CS=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -852,6 +869,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -894,6 +916,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/pb1100_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:12:05 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:08 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,13 +101,13 @@ CONFIG_MIPS_PB1100=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SWAP_IO_SPACE=y
# CONFIG_AU1000_USB_DEVICE is not set
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -134,7 +134,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
# CONFIG_64BIT_PHYS_ADDR is not set
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -153,7 +152,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
#
......@@ -245,6 +243,7 @@ CONFIG_MTD_PB1500_USER=y
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
......@@ -271,10 +270,12 @@ CONFIG_MTD_PB1500_USER=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -288,6 +289,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -364,8 +366,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -489,6 +489,7 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -539,7 +540,6 @@ CONFIG_RTC=y
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -575,12 +575,14 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -593,11 +595,25 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -747,6 +763,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -789,6 +810,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/pb1500_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:12:05 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:09 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,12 +101,12 @@ CONFIG_MIPS_PB1500=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_CPU_LITTLE_ENDIAN=y
# CONFIG_AU1X00_USB_DEVICE is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -133,7 +133,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -154,7 +153,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
......@@ -166,6 +164,7 @@ CONFIG_PD6729=m
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
......@@ -212,11 +211,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -230,6 +231,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -359,8 +361,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -522,6 +522,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -575,7 +576,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -611,6 +611,8 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -624,11 +626,25 @@ CONFIG_SYNCLINK_CS=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -776,6 +792,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -818,6 +839,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/configs/pb1550_defconfig
View file @ 99035860
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.10-rc2
# Sun Nov 21 14:12:05 2004
# Linux kernel version: 2.6.11-rc2
# Wed Jan 26 02:49:09 2005
#
CONFIG_MIPS=y
# CONFIG_MIPS64 is not set
......@@ -101,12 +101,12 @@ CONFIG_MIPS_PB1550=y
# CONFIG_SNI_RM200_PCI is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_DMA_COHERENT=y
CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_FB is not set
#
# CPU selection
......@@ -133,7 +133,6 @@ CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_CPU_HAS_PREFETCH=y
# CONFIG_VTAG_ICACHE is not set
CONFIG_64BIT_PHYS_ADDR=y
# CONFIG_CPU_ADVANCED is not set
CONFIG_CPU_HAS_LLSC=y
......@@ -154,7 +153,6 @@ CONFIG_MMU=y
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA_OBSOLETE is not set
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
......@@ -166,6 +164,7 @@ CONFIG_PD6729=m
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_AU1X00 is not set
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
......@@ -212,11 +211,13 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
CONFIG_CDROM_PKTCDVD=m
......@@ -230,6 +231,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
......@@ -359,8 +361,6 @@ CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -514,6 +514,7 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
CONFIG_SERIO_RAW=m
#
......@@ -567,7 +568,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
......@@ -603,6 +603,8 @@ CONFIG_SYNCLINK_CS=m
#
# Graphics support
#
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
......@@ -616,11 +618,25 @@ CONFIG_SYNCLINK_CS=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
......@@ -768,6 +784,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
......@@ -810,6 +831,10 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
......
arch/mips/pci/fixup-au1000.c
View file @ 99035860
......@@ -98,6 +98,19 @@ static char irq_tab_alchemy[][5] __initdata = {
};
#endif
#ifdef CONFIG_MIPS_MTX1
static char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
#endif
int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return irq_tab_alchemy[slot][pin];
......
drivers/pcmcia/Kconfig
View file @ 99035860
......@@ -134,6 +134,10 @@ config HD64465_PCMCIA
tristate "HD64465 host bridge support"
depends on HD64465 && PCMCIA
config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
......
drivers/pcmcia/Makefile
View file @ 99035860
......@@ -30,10 +30,21 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_core.o pxa2xx_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
sa11xx_core-y += soc_common.o sa11xx_base.o
pxa2xx_core-y += soc_common.o pxa2xx_base.o
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
sa1111_cs-y += sa1111_generic.o
sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o
sa1111_cs-$(CONFIG_SA1100_BADGE4) += sa1100_badge4.o
......
drivers/pcmcia/au1000_db1x00.c 0 → 100644
View file @ 99035860
/*
*
* Alchemy Semi Db1x00 boards specific pcmcia routines.
*
* Copyright 2002 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* Copyright 2004 Pete Popov, updated the driver to 2.6.
* Followed the sa11xx API and largely copied many of the hardware
* independent functions.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/init.h>
#include <asm/irq.h>
#include <asm/signal.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
#include "au1000_generic.h"
#if 0
#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
#else
#define debug(x,args...)
#endif
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
{
#ifdef CONFIG_MIPS_DB1550
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
#else
skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
#endif
return 0;
}
static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
{
bcsr->pcmcia = 0; /* turn off power */
au_sync_delay(2);
}
static void
db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
{
u32 inserted;
unsigned char vs;
state->ready = 0;
state->vs_Xv = 0;
state->vs_3v = 0;
state->detect = 0;
switch (skt->nr) {
case 0:
vs = bcsr->status & 0x3;
inserted = !(bcsr->status & (1<<4));
break;
case 1:
vs = (bcsr->status & 0xC)>>2;
inserted = !(bcsr->status & (1<<5));
break;
default:/* should never happen */
return;
}
if (inserted)
debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
skt->nr, inserted, vs, bcsr->pcmcia);
if (inserted) {
switch (vs) {
case 0:
case 2:
state->vs_3v=1;
break;
case 3: /* 5V */
break;
default:
/* return without setting 'detect' */
printk(KERN_ERR "db1x00 bad VS (%d)\n",
vs);
}
state->detect = 1;
state->ready = 1;
}
else {
/* if the card was previously inserted and then ejected,
* we should turn off power to it
*/
if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
BCSR_PCMCIA_PC0DRVEN |
BCSR_PCMCIA_PC0VPP |
BCSR_PCMCIA_PC0VCC);
au_sync_delay(10);
}
else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
BCSR_PCMCIA_PC1DRVEN |
BCSR_PCMCIA_PC1VPP |
BCSR_PCMCIA_PC1VCC);
au_sync_delay(10);
}
}
state->bvd1=1;
state->bvd2=1;
state->wrprot=0;
}
static int
db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
{
u16 pwr;
int sock = skt->nr;
debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
sock, state->Vcc, state->Vpp,
state->flags & SS_RESET);
/* pcmcia reg was set to zero at init time. Be careful when
* initializing a socket not to wipe out the settings of the
* other socket.
*/
pwr = bcsr->pcmcia;
pwr &= ~(0xf << sock*8); /* clear voltage settings */
state->Vpp = 0;
switch(state->Vcc){
case 0: /* Vcc 0 */
pwr |= SET_VCC_VPP(0,0,sock);
break;
case 50: /* Vcc 5V */
switch(state->Vpp) {
case 0:
pwr |= SET_VCC_VPP(2,0,sock);
break;
case 50:
pwr |= SET_VCC_VPP(2,1,sock);
break;
case 12:
pwr |= SET_VCC_VPP(2,2,sock);
break;
case 33:
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
__FUNCTION__,
state->Vcc,
state->Vpp);
break;
}
break;
case 33: /* Vcc 3.3V */
switch(state->Vpp) {
case 0:
pwr |= SET_VCC_VPP(1,0,sock);
break;
case 12:
pwr |= SET_VCC_VPP(1,2,sock);
break;
case 33:
pwr |= SET_VCC_VPP(1,1,sock);
break;
case 50:
default:
pwr |= SET_VCC_VPP(0,0,sock);
printk("%s: bad Vcc/Vpp (%d:%d)\n",
__FUNCTION__,
state->Vcc,
state->Vpp);
break;
}
break;
default: /* what's this ? */
pwr |= SET_VCC_VPP(0,0,sock);
printk(KERN_ERR "%s: bad Vcc %d\n",
__FUNCTION__, state->Vcc);
break;
}
bcsr->pcmcia = pwr;
au_sync_delay(300);
if (sock == 0) {
if (!(state->flags & SS_RESET)) {
pwr |= BCSR_PCMCIA_PC0DRVEN;
bcsr->pcmcia = pwr;
au_sync_delay(300);
pwr |= BCSR_PCMCIA_PC0RST;
bcsr->pcmcia = pwr;
au_sync_delay(100);
}
else {
pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
bcsr->pcmcia = pwr;
au_sync_delay(100);
}
}
else {
if (!(state->flags & SS_RESET)) {
pwr |= BCSR_PCMCIA_PC1DRVEN;
bcsr->pcmcia = pwr;
au_sync_delay(300);
pwr |= BCSR_PCMCIA_PC1RST;
bcsr->pcmcia = pwr;
au_sync_delay(100);
}
else {
pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
bcsr->pcmcia = pwr;
au_sync_delay(100);
}
}
return 0;
}
/*
* Enable card status IRQs on (re-)initialisation. This can
* be called at initialisation, power management event, or
* pcmcia event.
*/
void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
{
/* nothing to do for now */
}
/*
* Disable card status IRQs and PCMCIA bus on suspend.
*/
void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
{
/* nothing to do for now */
}
struct pcmcia_low_level db1x00_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = db1x00_pcmcia_hw_init,
.hw_shutdown = db1x00_pcmcia_shutdown,
.socket_state = db1x00_pcmcia_socket_state,
.configure_socket = db1x00_pcmcia_configure_socket,
.socket_init = db1x00_socket_init,
.socket_suspend = db1x00_socket_suspend
};
int __init au1x_board_init(struct device *dev)
{
int ret = -ENODEV;
bcsr->pcmcia = 0; /* turn off power, if it's not already off */
au_sync_delay(2);
ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
return ret;
}
drivers/pcmcia/au1000_generic.c
View file @ 99035860
This diff is collapsed.
drivers/pcmcia/au1000_generic.h 0 → 100644
View file @ 99035860
/*
* Alchemy Semi Au1000 pcmcia driver include file
*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#ifndef __ASM_AU1000_PCMCIA_H
#define __ASM_AU1000_PCMCIA_H
/* include the world */
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
#include <pcmcia/bulkmem.h>
#include <pcmcia/cistpl.h>
#include "cs_internal.h"
#define AU1000_PCMCIA_POLL_PERIOD (2*HZ)
#define AU1000_PCMCIA_IO_SPEED (255)
#define AU1000_PCMCIA_MEM_SPEED (300)
#define AU1X_SOCK0_IO 0xF00000000
#define AU1X_SOCK0_PHYS_ATTR 0xF40000000
#define AU1X_SOCK0_PHYS_MEM 0xF80000000
/* pseudo 32 bit phys addresses, which get fixed up to the
* real 36 bit address in fixup_bigphys_addr() */
#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
#define AU1X_SOCK0_PSEUDO_PHYS_MEM 0xF8000000
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550)
#define AU1X_SOCK1_IO 0xF08000000
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000
#define AU1X_SOCK1_PHYS_MEM 0xF88000000
#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#define AU1X_SOCK1_IO 0xF04000000
#define AU1X_SOCK1_PHYS_ATTR 0xF44000000
#define AU1X_SOCK1_PHYS_MEM 0xF84000000
#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000
#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8400000
#endif
struct pcmcia_state {
unsigned detect: 1,
ready: 1,
wrprot: 1,
bvd1: 1,
bvd2: 1,
vs_3v: 1,
vs_Xv: 1;
};
struct pcmcia_configure {
unsigned sock: 8,
vcc: 8,
vpp: 8,
output: 1,
speaker: 1,
reset: 1;
};
struct pcmcia_irqs {
int sock;
int irq;
const char *str;
};
struct au1000_pcmcia_socket {
struct pcmcia_socket socket;
/*
* Info from low level handler
*/
struct device *dev;
unsigned int nr;
unsigned int irq;
/*
* Core PCMCIA state
*/
struct pcmcia_low_level *ops;
unsigned int status;
socket_state_t cs_state;
unsigned short spd_io[MAX_IO_WIN];
unsigned short spd_mem[MAX_WIN];
unsigned short spd_attr[MAX_WIN];
struct resource res_skt;
struct resource res_io;
struct resource res_mem;
struct resource res_attr;
void * virt_io;
ioaddr_t phys_io;
unsigned int phys_attr;
unsigned int phys_mem;
unsigned short speed_io, speed_attr, speed_mem;
unsigned int irq_state;
struct timer_list poll_timer;
};
struct pcmcia_low_level {
struct module *owner;
int (*hw_init)(struct au1000_pcmcia_socket *);
void (*hw_shutdown)(struct au1000_pcmcia_socket *);
void (*socket_state)(struct au1000_pcmcia_socket *, struct pcmcia_state *);
int (*configure_socket)(struct au1000_pcmcia_socket *, struct socket_state_t *);
/*
* Enable card status IRQs on (re-)initialisation. This can
* be called at initialisation, power management event, or
* pcmcia event.
*/
void (*socket_init)(struct au1000_pcmcia_socket *);
/*
* Disable card status IRQs and PCMCIA bus on suspend.
*/
void (*socket_suspend)(struct au1000_pcmcia_socket *);
};
extern int au1x_board_init(struct device *dev);
#endif /* __ASM_AU1000_PCMCIA_H */
drivers/pcmcia/au1000_pb1x00.c
View file @ 99035860
......@@ -30,6 +30,7 @@
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/version.h>
#include <linux/types.h>
#include <pcmcia/version.h>
......@@ -55,7 +56,7 @@
#define PCMCIA_IRQ AU1000_GPIO_15
#elif defined (CONFIG_MIPS_PB1500)
#include <asm/pb1500.h>
#define PCMCIA_IRQ AU1000_GPIO_11 /* fixme */
#define PCMCIA_IRQ AU1500_GPIO_203
#elif defined (CONFIG_MIPS_PB1100)
#include <asm/pb1100.h>
#define PCMCIA_IRQ AU1000_GPIO_11
......@@ -82,9 +83,9 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init)
#else /* fixme -- take care of the Pb1500 at some point */
u16 pcr;
pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf; /* turn off power */
pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN);
au_writew(pcr, PB1100_MEM_PCMCIA);
pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(500);
return PCMCIA_NUM_SOCKS;
#endif
......@@ -102,9 +103,9 @@ static int pb1x00_pcmcia_shutdown(void)
return 0;
#else
u16 pcr;
pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf; /* turn off power */
pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN);
au_writew(pcr, PB1100_MEM_PCMCIA);
pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(2);
return 0;
#endif
......@@ -123,9 +124,14 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
vs0 = (vs0 >> 4) & 0x3;
vs1 = (vs1 >> 12) & 0x3;
#else
vs0 = (au_readw(PB1100_BOARD_STATUS) >> 4) & 0x3;
vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
#ifdef CONFIG_MIPS_PB1500
inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
#else /* Pb1100 */
inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
#endif
inserted1 = 0;
#endif
state->ready = 0;
state->vs_Xv = 0;
......@@ -145,7 +151,7 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
/* return without setting 'detect' */
printk(KERN_ERR "pb1x00 bad VS (%d)\n",
vs0);
return;
return 0;
}
state->detect = 1;
}
......@@ -163,7 +169,7 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
/* return without setting 'detect' */
printk(KERN_ERR "pb1x00 bad VS (%d)\n",
vs1);
return;
return 0;
}
state->detect = 1;
}
......@@ -324,7 +330,7 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
#else
pcr = au_readw(PB1100_MEM_PCMCIA) & ~0xf;
pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n",
configure->vcc, configure->vpp, pcr, configure->reset);
......@@ -383,26 +389,27 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
break;
}
au_writew(pcr, PB1100_MEM_PCMCIA);
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(300);
if (!configure->reset) {
pcr |= PB1100_PC_DRV_EN;
au_writew(pcr, PB1100_MEM_PCMCIA);
pcr |= PC_DRV_EN;
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(100);
pcr |= PB1100_PC_DEASSERT_RST;
au_writew(pcr, PB1100_MEM_PCMCIA);
pcr |= PC_DEASSERT_RST;
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(100);
}
else {
pcr &= ~(PB1100_PC_DEASSERT_RST | PB1100_PC_DRV_EN);
au_writew(pcr, PB1100_MEM_PCMCIA);
pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
au_writew(pcr, PCMCIA_BOARD_REG);
au_sync_delay(100);
}
#endif
return 0;
}
struct pcmcia_low_level pb1x00_pcmcia_ops = {
pb1x00_pcmcia_init,
pb1x00_pcmcia_shutdown,
......
drivers/pcmcia/au1000_xxs1500.c 0 → 100644
View file @ 99035860
/*
*
* MyCable board specific pcmcia routines.
*
* Copyright 2003 MontaVista Software Inc.
* Author: Pete Popov, MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/config.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/tqueue.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/version.h>
#include <linux/types.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/ss.h>
#include <pcmcia/bulkmem.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/bus_ops.h>
#include "cs_internal.h"
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/au1000.h>
#include <asm/au1000_pcmcia.h>
#include <asm/xxs1500.h>
#if 0
#define DEBUG(x,args...) printk(__FUNCTION__ ": " x,##args)
#else
#define DEBUG(x,args...)
#endif
static int xxs1500_pcmcia_init(struct pcmcia_init *init)
{
return PCMCIA_NUM_SOCKS;
}
static int xxs1500_pcmcia_shutdown(void)
{
/* turn off power */
au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
GPIO2_OUTPUT);
au_sync_delay(100);
/* assert reset */
au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
GPIO2_OUTPUT);
au_sync_delay(100);
return 0;
}
static int
xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
{
u32 inserted; u32 vs;
unsigned long gpio, gpio2;
if(sock > PCMCIA_MAX_SOCK) return -1;
gpio = au_readl(SYS_PINSTATERD);
gpio2 = au_readl(GPIO2_PINSTATE);
vs = gpio2 & ((1<<8) | (1<<9));
inserted = (!(gpio & 0x1) && !(gpio & 0x2));
state->ready = 0;
state->vs_Xv = 0;
state->vs_3v = 0;
state->detect = 0;
if (inserted) {
switch (vs) {
case 0:
case 1:
case 2:
state->vs_3v=1;
break;
case 3: /* 5V */
default:
/* return without setting 'detect' */
printk(KERN_ERR "au1x00_cs: unsupported VS\n",
vs);
return;
}
state->detect = 1;
}
if (state->detect) {
state->ready = 1;
}
state->bvd1= gpio2 & (1<<10);
state->bvd2 = gpio2 & (1<<11);
state->wrprot=0;
return 1;
}
static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
{
if(info->sock > PCMCIA_MAX_SOCK) return -1;
info->irq = PCMCIA_IRQ;
return 0;
}
static int
xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure)
{
if(configure->sock > PCMCIA_MAX_SOCK) return -1;
DEBUG("Vcc %dV Vpp %dV, reset %d\n",
configure->vcc, configure->vpp, configure->reset);
switch(configure->vcc){
case 33: /* Vcc 3.3V */
/* turn on power */
DEBUG("turn on power\n");
au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30),
GPIO2_OUTPUT);
au_sync_delay(100);
break;
case 50: /* Vcc 5V */
default: /* what's this ? */
printk(KERN_ERR "au1x00_cs: unsupported VCC\n");
case 0: /* Vcc 0 */
/* turn off power */
au_sync_delay(100);
au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
GPIO2_OUTPUT);
break;
}
if (!configure->reset) {
DEBUG("deassert reset\n");
au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20),
GPIO2_OUTPUT);
au_sync_delay(100);
au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21),
GPIO2_OUTPUT);
}
else {
DEBUG("assert reset\n");
au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
GPIO2_OUTPUT);
}
au_sync_delay(100);
return 0;
}
struct pcmcia_low_level xxs1500_pcmcia_ops = {
xxs1500_pcmcia_init,
xxs1500_pcmcia_shutdown,
xxs1500_pcmcia_socket_state,
xxs1500_pcmcia_get_irq_info,
xxs1500_pcmcia_configure_socket
};
drivers/usb/host/ohci-au1xxx.c 0 → 100644
View file @ 99035860
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* Bus Glue for AMD Alchemy Au1xxx
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Rusell King et al.
*
* Modified for LH7A404 from ohci-sa1111.c
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
* Modified for AMD Alchemy Au1xxx
* by Matt Porter <mporter@kernel.crashing.org>
*
* This file is licenced under the GPL.
*/
#include <asm/mach-au1x00/au1000.h>
#define USBH_ENABLE_BE (1<<0)
#define USBH_ENABLE_C (1<<1)
#define USBH_ENABLE_E (1<<2)
#define USBH_ENABLE_CE (1<<3)
#define USBH_ENABLE_RD (1<<4)
#ifdef __LITTLE_ENDIAN
#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
#elif __BIG_ENDIAN
#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
#else
#error not byte order defined
#endif
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void au1xxx_start_hc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": starting Au1xxx OHCI USB Controller\n");
/* enable host controller */
au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
udelay(1000);
au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
udelay(1000);
/* wait for reset complete (read register twice; see au1500 errata) */
while (au_readl(USB_HOST_CONFIG),
!(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
udelay(1000);
printk(KERN_DEBUG __FILE__
": Clock to USB host has been enabled \n");
}
static void au1xxx_stop_hc(struct platform_device *dev)
{
printk(KERN_DEBUG __FILE__
": stopping Au1xxx OHCI USB Controller\n");
/* Disable clock */
au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
}
/*-------------------------------------------------------------------------*/
static irqreturn_t usb_hcd_au1xxx_hcim_irq (int irq, void *__hcd,
struct pt_regs * r)
{
struct usb_hcd *hcd = __hcd;
return usb_hcd_irq(irq, hcd, r);
}
/*-------------------------------------------------------------------------*/
void usb_hcd_au1xxx_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
*/
int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
struct usb_hcd **hcd_out,
struct platform_device *dev)
{
int retval;
struct usb_hcd *hcd = 0;
unsigned int *addr = NULL;
if (!request_mem_region(dev->resource[0].start,
dev->resource[0].end
- dev->resource[0].start + 1, hcd_name)) {
pr_debug("request_mem_region failed");
return -EBUSY;
}
au1xxx_start_hc(dev);
addr = ioremap(dev->resource[0].start,
dev->resource[0].end
- dev->resource[0].start + 1);
if (!addr) {
pr_debug("ioremap failed");
retval = -ENOMEM;
goto err1;
}
if(dev->resource[1].flags != IORESOURCE_IRQ) {
pr_debug ("resource[1] is not IORESOURCE_IRQ");
retval = -ENOMEM;
goto err1;
}
hcd = usb_create_hcd(driver);
if (hcd == NULL) {
pr_debug ("usb_create_hcd failed");
retval = -ENOMEM;
goto err1;
}
ohci_hcd_init(hcd_to_ohci(hcd));
hcd->irq = dev->resource[1].start;
hcd->regs = addr;
hcd->self.controller = &dev->dev;
retval = hcd_buffer_create (hcd);
if (retval != 0) {
pr_debug ("pool alloc fail");
goto err2;
}
retval = request_irq (hcd->irq, usb_hcd_au1xxx_hcim_irq, SA_INTERRUPT,
hcd->driver->description, hcd);
if (retval != 0) {
pr_debug("request_irq failed");
retval = -EBUSY;
goto err3;
}
pr_debug ("%s (Au1xxx) at 0x%p, irq %d",
hcd->driver->description, hcd->regs, hcd->irq);
hcd->self.bus_name = "au1xxx";
usb_register_bus (&hcd->self);
if ((retval = driver->start (hcd)) < 0)
{
usb_hcd_au1xxx_remove(hcd, dev);
printk("bad driver->start\n");
return retval;
}
*hcd_out = hcd;
return 0;
err3:
hcd_buffer_destroy (hcd);
err2:
usb_put_hcd(hcd);
err1:
au1xxx_stop_hc(dev);
release_mem_region(dev->resource[0].start,
dev->resource[0].end
- dev->resource[0].start + 1);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_au1xxx_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev)
{
pr_debug ("remove: %s, state %x", hcd->self.bus_name, hcd->state);
if (in_interrupt ())
BUG ();
hcd->state = USB_STATE_QUIESCING;
pr_debug ("%s: roothub graceful disconnect", hcd->self.bus_name);
usb_disconnect (&hcd->self.root_hub);
hcd->driver->stop (hcd);
hcd->state = USB_STATE_HALT;
free_irq (hcd->irq, hcd);
hcd_buffer_destroy (hcd);
usb_deregister_bus (&hcd->self);
au1xxx_stop_hc(dev);
release_mem_region(dev->resource[0].start,
dev->resource[0].end
- dev->resource[0].start + 1);
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_au1xxx_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);
if ((ret = ohci_init (ohci)) < 0)
return ret;
if ((ret = ohci_run (ohci)) < 0) {
err ("can't start %s", hcd->self.bus_name);
ohci_stop (hcd);
return ret;
}
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_au1xxx_hc_driver = {
.description = hcd_name,
.product_desc = "Au1xxx OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11,
/*
* basic lifecycle operations
*/
.start = ohci_au1xxx_start,
#ifdef CONFIG_PM
/* suspend: ohci_au1xxx_suspend, -- tbd */
/* resume: ohci_au1xxx_resume, -- tbd */
#endif /*CONFIG_PM*/
.stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_au1xxx_drv_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = NULL;
int ret;
pr_debug ("In ohci_hcd_au1xxx_drv_probe");
if (usb_disabled())
return -ENODEV;
ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, &hcd, pdev);
if (ret == 0)
dev_set_drvdata(dev, hcd);
return ret;
}
static int ohci_hcd_au1xxx_drv_remove(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_hcd_au1xxx_remove(hcd, pdev);
dev_set_drvdata(dev, NULL);
return 0;
}
/*TBD*/
/*static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
return 0;
}
static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct usb_hcd *hcd = dev_get_drvdata(dev);
return 0;
}
*/
static struct device_driver ohci_hcd_au1xxx_driver = {
.name = "au1xxx-ohci",
.bus = &platform_bus_type,
.probe = ohci_hcd_au1xxx_drv_probe,
.remove = ohci_hcd_au1xxx_drv_remove,
/*.suspend = ohci_hcd_au1xxx_drv_suspend, */
/*.resume = ohci_hcd_au1xxx_drv_resume, */
};
static int __init ohci_hcd_au1xxx_init (void)
{
pr_debug (DRIVER_INFO " (Au1xxx)");
pr_debug ("block sizes: ed %d td %d\n",
sizeof (struct ed), sizeof (struct td));
return driver_register(&ohci_hcd_au1xxx_driver);
}
static void __exit ohci_hcd_au1xxx_cleanup (void)
{
driver_unregister(&ohci_hcd_au1xxx_driver);
}
module_init (ohci_hcd_au1xxx_init);
module_exit (ohci_hcd_au1xxx_cleanup);
drivers/usb/host/ohci-hcd.c
View file @ 99035860
......@@ -897,11 +897,16 @@ MODULE_LICENSE ("GPL");
#include "ohci-pxa27x.c"
#endif
#ifdef CONFIG_SOC_AU1X00
#include "ohci-au1xxx.c"
#endif
#if !(defined(CONFIG_PCI) \
|| defined(CONFIG_SA1111) \
|| defined(CONFIG_ARCH_OMAP) \
|| defined (CONFIG_ARCH_LH7A404) \
|| defined (CONFIG_PXA27x) \
|| defined (CONFIG_SOC_AU1X00) \
)
#error "missing bus glue for ohci-hcd"
#endif
drivers/video/Kconfig
View file @ 99035860
......@@ -919,6 +919,42 @@ config FB_PM3
similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
and maybe other boards.
config FB_E1356
tristate "Epson SED1356 framebuffer support"
depends on FB && EXPERIMENTAL && PCI && MIPS
config PB1000_CRT
bool "Use CRT on Pb1000 (J65)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_NTSC
bool "Use Compsite NTSC on Pb1000 (J63)"
depends on MIPS_PB1000=y && FB_E1356
config PB1000_TFT
bool "Use TFT Panel on Pb1000 (J64)"
depends on MIPS_PB1000=y && FB_E1356
config PB1500_CRT
bool "Use CRT on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_CRT
prompt "Use CRT on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config PB1500_TFT
bool "Use TFT Panel on Pb1500 " if MIPS_PB1500=y
depends on FB_E1356
config PB1500_TFT
prompt "Use TFT Panel on Pb1100 "
depends on FB_E1356 && MIPS_PB1100=y
config FB_AU1100
bool "Au1100 LCD Driver"
depends on FB && EXPERIMENTAL && PCI && MIPS && MIPS_PB1100=y
config FB_SBUS
bool "SBUS and UPA framebuffers"
depends on FB && (SPARC32 || SPARC64)
......
drivers/video/Makefile
View file @ 99035860
......@@ -96,6 +96,7 @@ obj-$(CONFIG_FB_CIRRUS) += cirrusfb.o cfbfillrect.o cfbimgblt.o cfbcopyarea.o
obj-$(CONFIG_FB_ASILIANT) += asiliantfb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
obj-$(CONFIG_FB_PXA) += pxafb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
obj-$(CONFIG_FB_W100) += w100fb.o cfbimgblt.o cfbcopyarea.o cfbfillrect.o
obj-$(CONFIG_FB_AU1100) += au1100fb.o fbgen.o
# Platform or fallback drivers go here
obj-$(CONFIG_FB_VESA) += vesafb.o cfbfillrect.o cfbcopyarea.o cfbimgblt.o
......
drivers/video/au1100fb.c 0 → 100644
View file @ 99035860
This diff is collapsed.
drivers/video/au1100fb.h 0 → 100644
View file @ 99035860
/*
* BRIEF MODULE DESCRIPTION
* Hardware definitions for the Au1100 LCD controller
*
* Copyright 2002 MontaVista Software
* Copyright 2002 Alchemy Semiconductor
* Author: Alchemy Semiconductor, MontaVista Software
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _AU1100LCD_H
#define _AU1100LCD_H
/********************************************************************/
#define uint32 unsigned long
typedef volatile struct
{
uint32 lcd_control;
uint32 lcd_intstatus;
uint32 lcd_intenable;
uint32 lcd_horztiming;
uint32 lcd_verttiming;
uint32 lcd_clkcontrol;
uint32 lcd_dmaaddr0;
uint32 lcd_dmaaddr1;
uint32 lcd_words;
uint32 lcd_pwmdiv;
uint32 lcd_pwmhi;
uint32 reserved[(0x0400-0x002C)/4];
uint32 lcd_pallettebase[256];
} AU1100_LCD;
/********************************************************************/
#define AU1100_LCD_ADDR 0xB5000000
/*
* Register bit definitions
*/
/* lcd_control */
#define LCD_CONTROL_SBPPF (7<<18)
#define LCD_CONTROL_SBPPF_655 (0<<18)
#define LCD_CONTROL_SBPPF_565 (1<<18)
#define LCD_CONTROL_SBPPF_556 (2<<18)
#define LCD_CONTROL_SBPPF_1555 (3<<18)
#define LCD_CONTROL_SBPPF_5551 (4<<18)
#define LCD_CONTROL_WP (1<<17)
#define LCD_CONTROL_WD (1<<16)
#define LCD_CONTROL_C (1<<15)
#define LCD_CONTROL_SM (3<<13)
#define LCD_CONTROL_SM_0 (0<<13)
#define LCD_CONTROL_SM_90 (1<<13)
#define LCD_CONTROL_SM_180 (2<<13)
#define LCD_CONTROL_SM_270 (3<<13)
#define LCD_CONTROL_DB (1<<12)
#define LCD_CONTROL_CCO (1<<11)
#define LCD_CONTROL_DP (1<<10)
#define LCD_CONTROL_PO (3<<8)
#define LCD_CONTROL_PO_00 (0<<8)
#define LCD_CONTROL_PO_01 (1<<8)
#define LCD_CONTROL_PO_10 (2<<8)
#define LCD_CONTROL_PO_11 (3<<8)
#define LCD_CONTROL_MPI (1<<7)
#define LCD_CONTROL_PT (1<<6)
#define LCD_CONTROL_PC (1<<5)
#define LCD_CONTROL_BPP (7<<1)
#define LCD_CONTROL_BPP_1 (0<<1)
#define LCD_CONTROL_BPP_2 (1<<1)
#define LCD_CONTROL_BPP_4 (2<<1)
#define LCD_CONTROL_BPP_8 (3<<1)
#define LCD_CONTROL_BPP_12 (4<<1)
#define LCD_CONTROL_BPP_16 (5<<1)
#define LCD_CONTROL_GO (1<<0)
/* lcd_intstatus, lcd_intenable */
#define LCD_INT_SD (1<<7)
#define LCD_INT_OF (1<<6)
#define LCD_INT_UF (1<<5)
#define LCD_INT_SA (1<<3)
#define LCD_INT_SS (1<<2)
#define LCD_INT_S1 (1<<1)
#define LCD_INT_S0 (1<<0)
/* lcd_horztiming */
#define LCD_HORZTIMING_HN2 (255<<24)
#define LCD_HORZTIMING_HN2_N(N) (((N)-1)<<24)
#define LCD_HORZTIMING_HN1 (255<<16)
#define LCD_HORZTIMING_HN1_N(N) (((N)-1)<<16)
#define LCD_HORZTIMING_HPW (63<<10)
#define LCD_HORZTIMING_HPW_N(N) (((N)-1)<<10)
#define LCD_HORZTIMING_PPL (1023<<0)
#define LCD_HORZTIMING_PPL_N(N) (((N)-1)<<0)
/* lcd_verttiming */
#define LCD_VERTTIMING_VN2 (255<<24)
#define LCD_VERTTIMING_VN2_N(N) (((N)-1)<<24)
#define LCD_VERTTIMING_VN1 (255<<16)
#define LCD_VERTTIMING_VN1_N(N) (((N)-1)<<16)
#define LCD_VERTTIMING_VPW (63<<10)
#define LCD_VERTTIMING_VPW_N(N) (((N)-1)<<10)
#define LCD_VERTTIMING_LPP (1023<<0)
#define LCD_VERTTIMING_LPP_N(N) (((N)-1)<<0)
/* lcd_clkcontrol */
#define LCD_CLKCONTROL_IB (1<<18)
#define LCD_CLKCONTROL_IC (1<<17)
#define LCD_CLKCONTROL_IH (1<<16)
#define LCD_CLKCONTROL_IV (1<<15)
#define LCD_CLKCONTROL_BF (31<<10)
#define LCD_CLKCONTROL_BF_N(N) (((N)-1)<<10)
#define LCD_CLKCONTROL_PCD (1023<<0)
#define LCD_CLKCONTROL_PCD_N(N) ((N)<<0)
/* lcd_pwmdiv */
#define LCD_PWMDIV_EN (1<<12)
#define LCD_PWMDIV_PWMDIV (2047<<0)
#define LCD_PWMDIV_PWMDIV_N(N) (((N)-1)<<0)
/* lcd_pwmhi */
#define LCD_PWMHI_PWMHI1 (2047<<12)
#define LCD_PWMHI_PWMHI1_N(N) ((N)<<12)
#define LCD_PWMHI_PWMHI0 (2047<<0)
#define LCD_PWMHI_PWMHI0_N(N) ((N)<<0)
/* lcd_pallettebase - MONOCHROME */
#define LCD_PALLETTE_MONO_MI (15<<0)
#define LCD_PALLETTE_MONO_MI_N(N) ((N)<<0)
/* lcd_pallettebase - COLOR */
#define LCD_PALLETTE_COLOR_BI (15<<8)
#define LCD_PALLETTE_COLOR_BI_N(N) ((N)<<8)
#define LCD_PALLETTE_COLOR_GI (15<<4)
#define LCD_PALLETTE_COLOR_GI_N(N) ((N)<<4)
#define LCD_PALLETTE_COLOR_RI (15<<0)
#define LCD_PALLETTE_COLOR_RI_N(N) ((N)<<0)
/* lcd_palletebase - COLOR TFT PALLETIZED */
#define LCD_PALLETTE_TFT_DC (65535<<0)
#define LCD_PALLETTE_TFT_DC_N(N) ((N)<<0)
/********************************************************************/
struct known_lcd_panels
{
uint32 xres;
uint32 yres;
uint32 bpp;
unsigned char panel_name[256];
uint32 mode_control;
uint32 mode_horztiming;
uint32 mode_verttiming;
uint32 mode_clkcontrol;
uint32 mode_pwmdiv;
uint32 mode_pwmhi;
uint32 mode_toyclksrc;
uint32 mode_backlight;
};
#if defined(__BIG_ENDIAN)
#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_11
#else
#define LCD_DEFAULT_PIX_FORMAT LCD_CONTROL_PO_00
#endif
/*
* The fb driver assumes that AUX PLL is at 48MHz. That can
* cover up to 800x600 resolution; if you need higher resolution,
* you should modify the driver as needed, not just this structure.
*/
struct known_lcd_panels panels[] =
{
{ /* 0: Pb1100 LCDA: Sharp 320x240 TFT panel */
320, /* xres */
240, /* yres */
16, /* bpp */
"Sharp_320x240_16",
/* mode_control */
( LCD_CONTROL_SBPPF_565
/*LCD_CONTROL_WP*/
/*LCD_CONTROL_WD*/
| LCD_CONTROL_C
| LCD_CONTROL_SM_0
/*LCD_CONTROL_DB*/
/*LCD_CONTROL_CCO*/
/*LCD_CONTROL_DP*/
| LCD_DEFAULT_PIX_FORMAT
/*LCD_CONTROL_MPI*/
| LCD_CONTROL_PT
| LCD_CONTROL_PC
| LCD_CONTROL_BPP_16 ),
/* mode_horztiming */
( LCD_HORZTIMING_HN2_N(8)
| LCD_HORZTIMING_HN1_N(60)
| LCD_HORZTIMING_HPW_N(12)
| LCD_HORZTIMING_PPL_N(320) ),
/* mode_verttiming */
( LCD_VERTTIMING_VN2_N(5)
| LCD_VERTTIMING_VN1_N(17)
| LCD_VERTTIMING_VPW_N(1)
| LCD_VERTTIMING_LPP_N(240) ),
/* mode_clkcontrol */
( 0
/*LCD_CLKCONTROL_IB*/
/*LCD_CLKCONTROL_IC*/
/*LCD_CLKCONTROL_IH*/
/*LCD_CLKCONTROL_IV*/
| LCD_CLKCONTROL_PCD_N(1) ),
/* mode_pwmdiv */
0,
/* mode_pwmhi */
0,
/* mode_toyclksrc */
((1<<7) | (1<<6) | (1<<5)),
/* mode_backlight */
6
},
{ /* 1: Pb1100 LCDC 640x480 TFT panel */
640, /* xres */
480, /* yres */
16, /* bpp */
"Generic_640x480_16",
/* mode_control */
0x004806a | LCD_DEFAULT_PIX_FORMAT,
/* mode_horztiming */
0x3434d67f,
/* mode_verttiming */
0x0e0e39df,
/* mode_clkcontrol */
( 0
/*LCD_CLKCONTROL_IB*/
/*LCD_CLKCONTROL_IC*/
/*LCD_CLKCONTROL_IH*/
/*LCD_CLKCONTROL_IV*/
| LCD_CLKCONTROL_PCD_N(1) ),
/* mode_pwmdiv */
0,
/* mode_pwmhi */
0,
/* mode_toyclksrc */
((1<<7) | (1<<6) | (0<<5)),
/* mode_backlight */
7
},
{ /* 2: Pb1100 LCDB 640x480 PrimeView TFT panel */
640, /* xres */
480, /* yres */
16, /* bpp */
"PrimeView_640x480_16",
/* mode_control */
0x0004886a | LCD_DEFAULT_PIX_FORMAT,
/* mode_horztiming */
0x0e4bfe7f,
/* mode_verttiming */
0x210805df,
/* mode_clkcontrol */
0x00038001,
/* mode_pwmdiv */
0,
/* mode_pwmhi */
0,
/* mode_toyclksrc */
((1<<7) | (1<<6) | (0<<5)),
/* mode_backlight */
7
},
{ /* 3: Pb1100 800x600x16bpp NEON CRT */
800, /* xres */
600, /* yres */
16, /* bpp */
"NEON_800x600_16",
/* mode_control */
0x0004886A | LCD_DEFAULT_PIX_FORMAT,
/* mode_horztiming */
0x005AFF1F,
/* mode_verttiming */
0x16000E57,
/* mode_clkcontrol */
0x00020000,
/* mode_pwmdiv */
0,
/* mode_pwmhi */
0,
/* mode_toyclksrc */
((1<<7) | (1<<6) | (0<<5)),
/* mode_backlight */
7
},
{ /* 4: Pb1100 640x480x16bpp NEON CRT */
640, /* xres */
480, /* yres */
16, /* bpp */
"NEON_640x480_16",
/* mode_control */
0x0004886A | LCD_DEFAULT_PIX_FORMAT,
/* mode_horztiming */
0x0052E27F,
/* mode_verttiming */
0x18000DDF,
/* mode_clkcontrol */
0x00020000,
/* mode_pwmdiv */
0,
/* mode_pwmhi */
0,
/* mode_toyclksrc */
((1<<7) | (1<<6) | (0<<5)),
/* mode_backlight */
7
},
};
#endif /* _AU1100LCD_H */
include/asm-mips/mach-au1x00/au1000.h
View file @ 99035860
......@@ -35,6 +35,8 @@
#ifndef _AU1000_H_
#define _AU1000_H_
#include <linux/config.h>
#ifndef _LANGUAGE_ASSEMBLY
#include <linux/delay.h>
......
include/asm-mips/mach-au1x00/au1xxx_dbdma.h
View file @ 99035860
......@@ -34,6 +34,8 @@
#ifndef _AU1000_DBDMA_H_
#define _AU1000_DBDMA_H_
#include <linux/config.h>
#ifndef _LANGUAGE_ASSEMBLY
/* The DMA base addresses.
......
include/asm-mips/mach-au1x00/au1xxx_psc.h
View file @ 99035860
This diff is collapsed.
include/asm-mips/mach-db1x00/db1x00.h
View file @ 99035860
......@@ -4,6 +4,7 @@
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
*
......@@ -27,6 +28,8 @@
#ifndef __ASM_DB1X00_H
#define __ASM_DB1X00_H
#include <linux/config.h>
#ifdef CONFIG_MIPS_DB1550
#define BCSR_KSEG1_ADDR 0xAF000000
#define NAND_PHYS_ADDR 0x20000000
......
include/asm-mips/mach-pb1x00/pb1550.h
View file @ 99035860
......@@ -3,6 +3,7 @@
* Board Registers defines.
*
* Copyright 2004 Embedded Edge LLC.
* Copyright 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
*
......@@ -26,8 +27,19 @@
#ifndef __ASM_PB1550_H
#define __ASM_PB1550_H
#include <linux/config.h>
#include <linux/types.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
#define SPI_PSC_BASE PSC0_BASE_ADDR
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_PHYS_ADDR 0xAF000000
typedef volatile struct
......
include/linux/ac97_codec.h
View file @ 99035860
......@@ -176,6 +176,39 @@
#define AC97_EXTSTAT_PRK 0x2000
#define AC97_EXTSTAT_PRL 0x4000
/* extended audio ID register bit defines */
#define AC97_EXTID_VRA 0x0001
#define AC97_EXTID_DRA 0x0002
#define AC97_EXTID_SPDIF 0x0004
#define AC97_EXTID_VRM 0x0008
#define AC97_EXTID_DSA0 0x0010
#define AC97_EXTID_DSA1 0x0020
#define AC97_EXTID_CDAC 0x0040
#define AC97_EXTID_SDAC 0x0080
#define AC97_EXTID_LDAC 0x0100
#define AC97_EXTID_AMAP 0x0200
#define AC97_EXTID_REV0 0x0400
#define AC97_EXTID_REV1 0x0800
#define AC97_EXTID_ID0 0x4000
#define AC97_EXTID_ID1 0x8000
/* extended status register bit defines */
#define AC97_EXTSTAT_VRA 0x0001
#define AC97_EXTSTAT_DRA 0x0002
#define AC97_EXTSTAT_SPDIF 0x0004
#define AC97_EXTSTAT_VRM 0x0008
#define AC97_EXTSTAT_SPSA0 0x0010
#define AC97_EXTSTAT_SPSA1 0x0020
#define AC97_EXTSTAT_CDAC 0x0040
#define AC97_EXTSTAT_SDAC 0x0080
#define AC97_EXTSTAT_LDAC 0x0100
#define AC97_EXTSTAT_MADC 0x0200
#define AC97_EXTSTAT_SPCV 0x0400
#define AC97_EXTSTAT_PRI 0x0800
#define AC97_EXTSTAT_PRJ 0x1000
#define AC97_EXTSTAT_PRK 0x2000
#define AC97_EXTSTAT_PRL 0x4000
/* useful power states */
#define AC97_PWR_D0 0x0000 /* everything on */
#define AC97_PWR_D1 AC97_PWR_PR0|AC97_PWR_PR1|AC97_PWR_PR4
......
sound/Kconfig
View file @ 99035860
......@@ -55,6 +55,8 @@ source "sound/ppc/Kconfig"
source "sound/arm/Kconfig"
source "sound/mips/Kconfig"
# the following will depenend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
......
sound/Makefile
View file @ 99035860
......@@ -4,7 +4,7 @@
obj-$(CONFIG_SOUND) += soundcore.o
obj-$(CONFIG_SOUND_PRIME) += oss/
obj-$(CONFIG_DMASOUND) += oss/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/
obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ synth/ usb/ sparc/ parisc/ pcmcia/ mips/
ifeq ($(CONFIG_SND),y)
obj-y += last.o
......
sound/mips/Kconfig 0 → 100644
View file @ 99035860
# ALSA MIPS drivers
menu "ALSA MIPS devices"
depends on SND!=n && MIPS
config SND_AU1X00
tristate "Au1x00 AC97 Port Driver"
depends on (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SND
select SND_PCM
select SND_AC97_CODEC
help
ALSA Sound driver for the Au1x00's AC97 port.
endmenu
sound/mips/Makefile 0 → 100644
View file @ 99035860
#
# Makefile for ALSA
#
snd-au1x00-objs := au1x00.o
# Toplevel Module Dependency
obj-$(CONFIG_SND_AU1X00) += snd-au1x00.o
sound/mips/au1x00.c 0 → 100644
View file @ 99035860
This diff is collapsed.
sound/oss/Kconfig
View file @ 99035860
......@@ -212,6 +212,14 @@ config SOUND_VRC5477
integrated, multi-function controller chip for MIPS CPUs. Works
with the AC97 codec.
config SOUND_AU1000
tristate "Au1000 Sound"
depends on SOUND_PRIME!=n && (SOC_AU1000 || SOC_AU1100 || SOC_AU1500) && SOUND
config SOUND_AU1550_AC97
tristate "Au1550 AC97 Sound"
depends on SOUND_PRIME!=n && SOC_AU1550 && SOUND
config SOUND_TRIDENT
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
depends on SOUND_PRIME!=n && SOUND && SOUND_GAMEPORT
......
sound/oss/Makefile
View file @ 99035860
......@@ -64,6 +64,8 @@ endif
obj-$(CONFIG_SOUND_ES1370) += es1370.o
obj-$(CONFIG_SOUND_ES1371) += es1371.o ac97_codec.o
obj-$(CONFIG_SOUND_VRC5477) += nec_vrc5477.o ac97_codec.o
obj-$(CONFIG_SOUND_AU1000) += au1000.o ac97_codec.o
obj-$(CONFIG_SOUND_AU1550_AC97) += au1550_ac97.o ac97_codec.o
obj-$(CONFIG_SOUND_ESSSOLO1) += esssolo1.o
obj-$(CONFIG_SOUND_FUSION) += cs46xx.o ac97_codec.o
obj-$(CONFIG_SOUND_MAESTRO) += maestro.o
......
sound/oss/ac97_codec.c
View file @ 99035860
......@@ -177,6 +177,7 @@ static const struct {
{0x83847608, "SigmaTel STAC9708", &sigmatel_9708_ops},
{0x83847609, "SigmaTel STAC9721/23", &sigmatel_9721_ops},
{0x83847644, "SigmaTel STAC9744/45", &sigmatel_9744_ops},
{0x83847652, "SigmaTel STAC9752/53", &default_ops},
{0x83847656, "SigmaTel STAC9756/57", &sigmatel_9744_ops},
{0x83847666, "SigmaTel STAC9750T", &sigmatel_9744_ops},
{0x83847684, "SigmaTel STAC9783/84?", &null_ops},
......
sound/oss/au1000.c
View file @ 99035860
This diff is collapsed.
sound/oss/au1550_ac97.c 0 → 100644
View file @ 99035860
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7