Merge tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull mmc fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.11 rc4.

  MMC core:
   - Fix initialization of HS400-ES eMMC cards
   - A couple of fixes for the mmc block device driver
   - Resolved a compiler warning

  MMC host:
   - sdhci: Do not disable IRQs while waiting for clock
   - sdhci-pci: Do not disable IRQs in sdhci_intel_set_power
   - sdhci-of-arasan: Fix incorrect timeout clock
   - mediatek: Fix bug for setting wrong clock frequency
   - sdhci-of-at91: Use regulator to fix cmd timeout errors
   - ushc: Fix NULL-deref at probe
   - rockchip-dw-mshc: Rename RK1108 to RV1108 in DT"

* tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_power
  mmc: sdhci: Do not disable interrupts while waiting for clock
  mmc: ushc: fix NULL-deref at probe
  mmc: sdhci-of-at91: Support external regulators
  mmc: core: mmc_blk_rw_cmd_err - remove unused variable
  mmc: mediatek: Fixed bug where clock frequency could be set wrong
  mmc: block: Fix cmd error reset failure path
  mmc: block: Fix is_waiting_last_req set incorrectly
  mmc: core: Fix access to HS400-ES devices
  mmc: sdhci-of-arasan: fix incorrect timeout clock
  dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108

Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt

@@ -13,7 +13,7 @@ Required Properties:
 	- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
 							before RK3288
 	- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
-	- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
+	- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
 	- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
 	- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
 	- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399

drivers/mmc/core/block.c

@@ -1560,11 +1560,8 @@ static bool mmc_blk_rw_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
 			       struct mmc_blk_request *brq, struct request *req,
 			       bool old_req_pending)
 {
-	struct mmc_queue_req *mq_rq;
 	bool req_pending;
 
-	mq_rq = container_of(brq, struct mmc_queue_req, brq);
-
 	/*
 	 * If this is an SD card and we're writing, we can first
 	 * mark the known good sectors as ok.
@@ -1701,6 +1698,7 @@ static void mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *new_req)
 		case MMC_BLK_CMD_ERR:
 			req_pending = mmc_blk_rw_cmd_err(md, card, brq, old_req, req_pending);
 			if (mmc_blk_reset(md, card->host, type)) {
+				if (req_pending)
 					mmc_blk_rw_cmd_abort(card, old_req);
 				mmc_blk_rw_try_restart(mq, new_req);
 				return;
@@ -1817,6 +1815,7 @@ void mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		mmc_blk_issue_flush(mq, req);
 	} else {
 		mmc_blk_issue_rw_rq(mq, req);
+		card->host->context_info.is_waiting_last_req = false;
 	}
 
 out:

drivers/mmc/core/mmc.c

@@ -1730,7 +1730,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 		err = mmc_select_hs400(card);
 		if (err)
 			goto free_card;
-	} else {
+	} else if (!mmc_card_hs400es(card)) {
 		/* Select the desired bus width optionally */
 		err = mmc_select_bus_width(card);
 		if (err > 0 && mmc_card_hs(card)) {

drivers/mmc/host/mtk-sd.c

@@ -580,7 +580,7 @@ static void msdc_set_mclk(struct msdc_host *host, unsigned char timing, u32 hz)
 		}
 	}
 	sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_CKMOD | MSDC_CFG_CKDIV,
-			(mode << 8) | (div % 0xff));
+		      (mode << 8) | div);
 	sdr_set_bits(host->base + MSDC_CFG, MSDC_CFG_CKPDN);
 	while (!(readl(host->base + MSDC_CFG) & MSDC_CFG_CKSTB))
 		cpu_relax();
@@ -1559,7 +1559,7 @@ static int msdc_drv_probe(struct platform_device *pdev)
 	host->src_clk_freq = clk_get_rate(host->src_clk);
 	/* Set host parameters to mmc */
 	mmc->ops = &mt_msdc_ops;
-	mmc->f_min = host->src_clk_freq / (4 * 255);
+	mmc->f_min = DIV_ROUND_UP(host->src_clk_freq, 4 * 255);
 
 	mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
 	/* MMC core transfer sizes tunable parameters */

drivers/mmc/host/sdhci-of-arasan.c

@@ -28,13 +28,9 @@
 #include "sdhci-pltfm.h"
 #include <linux/of.h>
 
-#define SDHCI_ARASAN_CLK_CTRL_OFFSET	0x2c
 #define SDHCI_ARASAN_VENDOR_REGISTER	0x78
 
 #define VENDOR_ENHANCED_STROBE		BIT(0)
-#define CLK_CTRL_TIMEOUT_SHIFT		16
-#define CLK_CTRL_TIMEOUT_MASK		(0xf << CLK_CTRL_TIMEOUT_SHIFT)
-#define CLK_CTRL_TIMEOUT_MIN_EXP	13
 
 #define PHY_CLK_TOO_SLOW_HZ		400000
 
@@ -163,15 +159,15 @@ static int sdhci_arasan_syscon_write(struct sdhci_host *host,
 
 static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
 {
-	u32 div;
 	unsigned long freq;
 	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 
-	div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET);
-	div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT;
+	/* SDHCI timeout clock is in kHz */
+	freq = DIV_ROUND_UP(clk_get_rate(pltfm_host->clk), 1000);
 
-	freq = clk_get_rate(pltfm_host->clk);
-	freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div);
+	/* or in MHz */
+	if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
+		freq = DIV_ROUND_UP(freq, 1000);
 
 	return freq;
 }

drivers/mmc/host/sdhci-of-at91.c

@@ -85,11 +85,30 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }
 
+/*
+ * In this specific implementation of the SDHCI controller, the power register
+ * needs to have a valid voltage set even when the power supply is managed by
+ * an external regulator.
+ */
+static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
+		     unsigned short vdd)
+{
+	if (!IS_ERR(host->mmc->supply.vmmc)) {
+		struct mmc_host *mmc = host->mmc;
+
+		spin_unlock_irq(&host->lock);
+		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+		spin_lock_irq(&host->lock);
+	}
+	sdhci_set_power_noreg(host, mode, vdd);
+}
+
 static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
 	.set_clock		= sdhci_at91_set_clock,
 	.set_bus_width		= sdhci_set_bus_width,
 	.reset			= sdhci_reset,
 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+	.set_power		= sdhci_at91_set_power,
 };
 
 static const struct sdhci_pltfm_data soc_data_sama5d2 = {

drivers/mmc/host/sdhci-pci-core.c

@@ -451,6 +451,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
 	if (mode == MMC_POWER_OFF)
 		return;
 
+	spin_unlock_irq(&host->lock);
+
 	/*
 	 * Bus power might not enable after D3 -> D0 transition due to the
 	 * present state not yet having propagated. Retry for up to 2ms.
@@ -463,6 +465,8 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
 		reg |= SDHCI_POWER_ON;
 		sdhci_writeb(host, reg, SDHCI_POWER_CONTROL);
 	}
+
+	spin_lock_irq(&host->lock);
 }
 
 static const struct sdhci_ops sdhci_intel_byt_ops = {

drivers/mmc/host/sdhci.c

@@ -1362,7 +1362,9 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
 			return;
 		}
 		timeout--;
-		mdelay(1);
+		spin_unlock_irq(&host->lock);
+		usleep_range(900, 1100);
+		spin_lock_irq(&host->lock);
 	}
 
 	clk |= SDHCI_CLOCK_CARD_EN;

drivers/mmc/host/ushc.c

@@ -426,6 +426,9 @@ static int ushc_probe(struct usb_interface *intf, const struct usb_device_id *id
 	struct ushc_data *ushc;
 	int ret;
 
+	if (intf->cur_altsetting->desc.bNumEndpoints < 1)
+		return -ENODEV;
+
 	mmc = mmc_alloc_host(sizeof(struct ushc_data), &intf->dev);
 	if (mmc == NULL)
 		return -ENOMEM;