Skip to content

L
linux
Commit 9b1489e9 authored by Uwe Kleine-König's avatar Uwe Kleine-König
Browse files
Options

Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into imx/master 

Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5.  This is handled
in 03e09cd8.

arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to
arch/arm/plat-mxc/iomux-v1.c in 5e2e95f5
and got bug fixed in 5c17ef87.  The bug
in arch/arm/plat-mxc/iomux-v1.c isn't present any more since
bac3fcfa, so
arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted.

Conflicts:
	arch/arm/plat-mxc/Kconfig
	arch/arm/plat-mxc/Makefile
	arch/arm/plat-mxc/iomux-mx1-mx2.c
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
parents bac3fcfa 08268b78
Hide whitespace changes
Inline Side-by-side
Showing with 5074 additions and 127 deletions
MAINTAINERS
View file @ 9b1489e9
......@@ -663,6 +663,12 @@ T: git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
M: Amit Kucheria <amit.kucheria@canonical.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mx5/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
arch/arm/Makefile
View file @ 9b1489e9
......@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
......
arch/arm/configs/mx51_defconfig 0 → 100644
View file @ 9b1489e9
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc6
# Tue Feb 2 15:20:48 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_BCMRING is not set
# CONFIG_ARCH_U8500 is not set
#
# Freescale MXC Implementations
#
# CONFIG_ARCH_MX1 is not set
# CONFIG_ARCH_MX2 is not set
# CONFIG_ARCH_MX25 is not set
# CONFIG_ARCH_MX3 is not set
# CONFIG_ARCH_MXC91231 is not set
CONFIG_ARCH_MX5=y
CONFIG_ARCH_MX51=y
#
# MX5 platforms:
#
CONFIG_MACH_MX51_BABBAGE=y
# CONFIG_MXC_IRQ_PRIOR is not set
CONFIG_MXC_TZIC=y
# CONFIG_MXC_PWM is not set
CONFIG_ARCH_MXC_IOMUX_V3=y
#
# Processor Type
#
CONFIG_CPU_32v6K=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_HAS_ASID=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
#
# Processor Features
#
CONFIG_ARM_THUMB=y
# CONFIG_ARM_THUMBEE is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
CONFIG_ARM_L1_CACHE_SHIFT=5
# CONFIG_ARM_ERRATA_430973 is not set
# CONFIG_ARM_ERRATA_458693 is not set
# CONFIG_ARM_ERRATA_460075 is not set
CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/nfs nfsroot=192.168.0.101:/shared/nfs ip=dhcp"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_NEON=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=m
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_IMX is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_MXC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_MXC is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ICEDCC is not set
# CONFIG_OC_ETM is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
arch/arm/mach-mx2/Kconfig
View file @ 9b1489e9
......@@ -37,6 +37,7 @@ config MACH_MX27ADS
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
depends on MACH_MX27
select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
......@@ -100,6 +101,7 @@ config MACH_IMX27LITE
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
depends on MACH_MX27
select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
......
arch/arm/mach-mx2/mach-pca100.c
View file @ 9b1489e9
......@@ -25,7 +25,11 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
......@@ -38,12 +42,19 @@
#include <mach/spi.h>
#endif
#include <mach/imx-uart.h>
#include <mach/audmux.h>
#include <mach/ssi.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
static int pca100_pins[] = {
/* UART1 */
PE12_PF_UART1_TXD,
......@@ -92,6 +103,34 @@ static int pca100_pins[] = {
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
/* OTG */
OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PC9_PF_USBOTG_DATA0,
PC10_PF_USBOTG_DATA2,
PC11_PF_USBOTG_DATA1,
PC12_PF_USBOTG_DATA4,
PC13_PF_USBOTG_DATA3,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
/* USBH2 */
USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
};
static struct imxuart_platform_data uart_pdata = {
......@@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
};
#endif
static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
udelay(2);
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
gpio_set_value(GPIO_PORTC + 22, 0);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
gpio_set_value(GPIO_PORTC + 28, 0);
udelay(10);
gpio_set_value(GPIO_PORTC + 28, 1);
mxc_gpio_mode(PC20_PF_SSI1_FS);
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
static struct imx_ssi_platform_data pca100_ssi_pdata = {
.ac97_reset = pca100_ac97_cold_reset,
.ac97_warm_reset = pca100_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
};
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
......@@ -182,15 +252,73 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pca100_sdhc2_exit,
};
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
return 0;
}
static struct mxc_usbh_platform_data otg_pdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int usbh2_phy_init(struct platform_device *pdev)
{
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
return 0;
}
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct fsl_usb2_platform_data otg_device_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static int otg_mode_host;
static int __init pca100_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", pca100_otg_mode);
static void __init pca100_init(void)
{
int ret;
/* SSI unit */
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(3) |
MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
MXC_AUDMUX_V1_PCR_RXDSEL(3));
mxc_audmux_v1_configure_port(3,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(0) |
MXC_AUDMUX_V1_PCR_TFSDIR |
MXC_AUDMUX_V1_PCR_RXDSEL(0));
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
......@@ -220,6 +348,29 @@ static void __init pca100_init(void)
mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
#endif
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
if (!otg_mode_host) {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......
arch/arm/mach-mx2/mach-pcm038.c
View file @ 9b1489e9
......@@ -40,6 +40,8 @@
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
......@@ -96,6 +98,19 @@ static int pcm038_pins[] = {
PC17_PF_SSI4_RXD,
PC18_PF_SSI4_TXD,
PC19_PF_SSI4_CLK,
/* USB host */
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
};
/*
......@@ -277,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
}
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
......@@ -309,6 +329,8 @@ static void __init pcm038_init(void)
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
......
arch/arm/mach-mx25/Kconfig
View file @ 9b1489e9
......@@ -3,7 +3,6 @@ if ARCH_MX25
comment "MX25 platforms:"
config MACH_MX25_3DS
select ARCH_MXC_IOMUX_V3
bool "Support MX25PDK (3DS) Platform"
endif
arch/arm/mach-mx25/clock.c
View file @ 9b1489e9
......@@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk)
return get_rate_per(5);
}
static unsigned long get_rate_lcdc(struct clk *clk)
{
return get_rate_per(7);
}
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
......@@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
......@@ -183,6 +190,7 @@ DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
......@@ -216,6 +224,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
};
int __init mx25_clocks_init(void)
......@@ -233,6 +242,9 @@ int __init mx25_clocks_init(void)
__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
/* Clock source for lcdc is upll */
__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
......
arch/arm/mach-mx25/devices.c
View file @ 9b1489e9
......@@ -477,3 +477,26 @@ struct platform_device mx25_rtc_device = {
.num_resources = ARRAY_SIZE(mx25_rtc_resources),
.resource = mx25_rtc_resources,
};
static struct resource mx25_fb_resources[] = {
{
.start = MX25_LCDC_BASE_ADDR,
.end = MX25_LCDC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_LCDC,
.end = MX25_INT_LCDC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx25_fb_device = {
.name = "imx-fb",
.id = 0,
.resource = mx25_fb_resources,
.num_resources = ARRAY_SIZE(mx25_fb_resources),
.dev = {
.coherent_dma_mask = 0xFFFFFFFF,
},
};
arch/arm/mach-mx25/devices.h
View file @ 9b1489e9
......@@ -20,3 +20,4 @@ extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
extern struct platform_device mxc_nand_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
arch/arm/mach-mx25/mach-mx25pdk.c
View file @ 9b1489e9
......@@ -35,6 +35,7 @@
#include <mach/imx-uart.h>
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
#include "devices.h"
#include <mach/iomux-mx25.h>
......@@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = {
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
MX25_PAD_LD2__LD2,
MX25_PAD_LD3__LD3,
MX25_PAD_LD4__LD4,
MX25_PAD_LD5__LD5,
MX25_PAD_LD6__LD6,
MX25_PAD_LD7__LD7,
MX25_PAD_LD8__LD8,
MX25_PAD_LD9__LD9,
MX25_PAD_LD10__LD10,
MX25_PAD_LD11__LD11,
MX25_PAD_LD12__LD12,
MX25_PAD_LD13__LD13,
MX25_PAD_LD14__LD14,
MX25_PAD_LD15__LD15,
MX25_PAD_GPIO_E__LD16,
MX25_PAD_GPIO_F__LD17,
MX25_PAD_HSYNC__HSYNC,
MX25_PAD_VSYNC__VSYNC,
MX25_PAD_LSCLK__LSCLK,
MX25_PAD_OE_ACD__OE_ACD,
MX25_PAD_CONTRAST__CONTRAST,
};
static struct fec_platform_data mx25_fec_pdata = {
......@@ -83,6 +109,34 @@ static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
.flash_bbt = 1,
};
static struct imx_fb_videomode mx25pdk_modes[] = {
{
.mode = {
.name = "CRT-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683,
.left_margin = 45,
.right_margin = 114,
.upper_margin = 33,
.lower_margin = 11,
.hsync_len = 1,
.vsync_len = 1,
},
.bpp = 16,
.pcr = 0xFA208B80,
},
};
static struct imx_fb_platform_data mx25pdk_fb_pdata = {
.mode = mx25pdk_modes,
.num_modes = ARRAY_SIZE(mx25pdk_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
......@@ -92,6 +146,7 @@ static void __init mx25pdk_init(void)
mxc_register_device(&mxc_usbh2, NULL);
mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
mxc_register_device(&mx25_rtc_device, NULL);
mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
......
arch/arm/mach-mx3/Kconfig
View file @ 9b1489e9
......@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
......@@ -86,6 +87,7 @@ config MACH_QONG
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
......
arch/arm/mach-mx3/Makefile
View file @ 9b1489e9
......@@ -18,7 +18,7 @@ obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
......
arch/arm/mach-mx3/mach-mx31ads.c
View file @ 9b1489e9
......@@ -483,6 +483,19 @@ static void mxc_init_i2c(void)
}
#endif
static unsigned int ssi_pins[] = {
MX31_PIN_SFS5__SFS5,
MX31_PIN_SCK5__SCK5,
MX31_PIN_SRXD5__SRXD5,
MX31_PIN_STXD5__STXD5,
};
static void mxc_init_audio(void)
{
mxc_register_device(&imx_ssi_device0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
......@@ -518,6 +531,7 @@ static void __init mxc_board_init(void)
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
mxc_init_audio();
}
static void __init mx31ads_timer_init(void)
......
arch/arm/mach-mx3/mach-mx31moboard.c
View file @ 9b1489e9
......@@ -96,9 +96,6 @@ static unsigned int moboard_pins[] = {
/* LEDs */
MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
/* SPI1 */
MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
......@@ -352,9 +349,7 @@ static struct fsl_usb2_platform_data usb_pdata = {
static int moboard_usbh2_hw_init(struct platform_device *pdev)
{
int ret = gpio_request(USBH2_EN_B, "usbh2-en");
if (ret)
return ret;
int ret;
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
......@@ -371,6 +366,9 @@ static int moboard_usbh2_hw_init(struct platform_device *pdev)
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
ret = gpio_request(USBH2_EN_B, "usbh2-en");
if (ret)
return ret;
gpio_direction_output(USBH2_EN_B, 0);
return 0;
......@@ -431,34 +429,6 @@ static struct platform_device mx31moboard_leds_device = {
},
};
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void mx31moboard_init_sel_gpios(void)
{
if (!gpio_request(SEL0, "sel0")) {
gpio_direction_input(SEL0);
gpio_export(SEL0, true);
}
if (!gpio_request(SEL1, "sel1")) {
gpio_direction_input(SEL1);
gpio_export(SEL1, true);
}
if (!gpio_request(SEL2, "sel2")) {
gpio_direction_input(SEL2);
gpio_export(SEL2, true);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
static struct ipu_platform_data mx3_ipu_data = {
.irq_base = MXC_IPU_IRQ_START,
};
......@@ -518,8 +488,6 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxc_uart_device4, &uart4_pdata);
mx31moboard_init_sel_gpios();
mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
......@@ -552,6 +520,9 @@ static void __init mxc_board_init(void)
case MX31MARXBOT:
mx31moboard_marxbot_init();
break;
case MX31SMARTBOT:
mx31moboard_smartbot_init();
break;
default:
printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
mx31moboard_baseboard);
......
arch/arm/mach-mx3/mach-pcm037.c
View file @ 9b1489e9
......@@ -33,6 +33,9 @@
#include <linux/irq.h>
#include <linux/fsl_devices.h>
#include <linux/can/platform/sja1000.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <media/soc_camera.h>
......@@ -51,6 +54,8 @@
#include <mach/mx3_camera.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
#include "pcm037.h"
......@@ -172,19 +177,7 @@ static unsigned int pcm037_pins[] = {
MX31_PIN_CSI_VSYNC__CSI_VSYNC,
/* GPIO */
IOMUX_MODE(MX31_PIN_ATA_DMACK, IOMUX_CONFIG_GPIO),
};
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
static struct resource pcm037_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static int usbotg_pins[] = {
/* OTG */
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
......@@ -197,39 +190,29 @@ static int usbotg_pins[] = {
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
MX31_PIN_USBOTG_STP__USBOTG_STP,
/* USB host 2 */
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
};
/* USB OTG HS port */
static int __init gpio_usbotg_hs_activate(void)
{
int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
ARRAY_SIZE(usbotg_pins), "usbotg");
if (ret < 0) {
printk(KERN_ERR "Cannot set up OTG pins\n");
return ret;
}
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
return 0;
}
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
/* OTG config */
static struct fsl_usb2_platform_data usb_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
static struct resource pcm037_flash_resource = {
.start = 0xa0000000,
.end = 0xa1ffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device pcm037_flash = {
......@@ -561,16 +544,65 @@ static struct platform_device pcm970_sja1000 = {
.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
};
static struct mxc_usbh_platform_data otg_pdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct fsl_usb2_platform_data otg_device_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static int otg_mode_host;
static int __init pcm037_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", pcm037_otg_mode);
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
int ret;
u32 tmp;
mxc_iomux_set_gpr(MUX_PGP_UH2, 1);
mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
"pcm037");
#define H2_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS \
| PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, H2_PAD_CFG);
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, H2_PAD_CFG); /* USBH2_DATA0 */
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, H2_PAD_CFG); /* USBH2_DATA1 */
mxc_iomux_set_pad(MX31_PIN_SRXD6, H2_PAD_CFG); /* USBH2_DATA2 */
mxc_iomux_set_pad(MX31_PIN_STXD6, H2_PAD_CFG); /* USBH2_DATA3 */
mxc_iomux_set_pad(MX31_PIN_SFS3, H2_PAD_CFG); /* USBH2_DATA4 */
mxc_iomux_set_pad(MX31_PIN_SCK3, H2_PAD_CFG); /* USBH2_DATA5 */
mxc_iomux_set_pad(MX31_PIN_SRXD3, H2_PAD_CFG); /* USBH2_DATA6 */
mxc_iomux_set_pad(MX31_PIN_STXD3, H2_PAD_CFG); /* USBH2_DATA7 */
if (pcm037_variant() == PCM037_EET)
mxc_iomux_setup_multiple_pins(pcm037_uart1_pins,
ARRAY_SIZE(pcm037_uart1_pins), "pcm037_uart1");
......@@ -608,8 +640,6 @@ static void __init mxc_board_init(void)
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
if (!gpio_usbotg_hs_activate())
mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
/* CSI */
/* Camera power: default - off */
......@@ -623,6 +653,23 @@ static void __init mxc_board_init(void)
mxc_register_device(&mx3_camera, &camera_pdata);
platform_device_register(&pcm970_sja1000);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
static void __init pcm037_timer_init(void)
......
arch/arm/mach-mx3/mach-pcm043.c
View file @ 9b1489e9
......@@ -26,8 +26,12 @@
#include <linux/gpio.h>
#include <linux/smc911x.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -44,6 +48,10 @@
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include <mach/audmux.h>
#include <mach/ssi.h>
#include "devices.h"
......@@ -205,6 +213,94 @@ static struct pad_desc pcm043_pads[] = {
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
/* gpio */
MX35_PAD_ATA_CS0__GPIO2_6,
/* USB host */
MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
/* SSI */
MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
};
#define AC97_GPIO_TXFS (1 * 32 + 31)
#define AC97_GPIO_TXD (1 * 32 + 28)
#define AC97_GPIO_RESET (1 * 32 + 0)
static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97)
{
struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
if (ret) {
printk("failed to get GPIO_TXFS: %d\n", ret);
return;
}
mxc_iomux_v3_setup_pad(&txfs_gpio);
/* warm reset */
gpio_direction_output(AC97_GPIO_TXFS, 1);
udelay(2);
gpio_set_value(AC97_GPIO_TXFS, 0);
gpio_free(AC97_GPIO_TXFS);
mxc_iomux_v3_setup_pad(&txfs);
}
static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97)
{
struct pad_desc txfs_gpio = MX35_PAD_STXFS4__GPIO2_31;
struct pad_desc txfs = MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS;
struct pad_desc txd_gpio = MX35_PAD_STXD4__GPIO2_28;
struct pad_desc txd = MX35_PAD_STXD4__AUDMUX_AUD4_TXD;
struct pad_desc reset_gpio = MX35_PAD_SD2_CMD__GPIO2_0;
int ret;
ret = gpio_request(AC97_GPIO_TXFS, "SSI");
if (ret)
goto err1;
ret = gpio_request(AC97_GPIO_TXD, "SSI");
if (ret)
goto err2;
ret = gpio_request(AC97_GPIO_RESET, "SSI");
if (ret)
goto err3;
mxc_iomux_v3_setup_pad(&txfs_gpio);
mxc_iomux_v3_setup_pad(&txd_gpio);
mxc_iomux_v3_setup_pad(&reset_gpio);
gpio_direction_output(AC97_GPIO_TXFS, 0);
gpio_direction_output(AC97_GPIO_TXD, 0);
/* cold reset */
gpio_direction_output(AC97_GPIO_RESET, 0);
udelay(10);
gpio_direction_output(AC97_GPIO_RESET, 1);
mxc_iomux_v3_setup_pad(&txd);
mxc_iomux_v3_setup_pad(&txfs);
gpio_free(AC97_GPIO_RESET);
err3:
gpio_free(AC97_GPIO_TXD);
err2:
gpio_free(AC97_GPIO_TXFS);
err1:
if (ret)
printk("%s failed with %d\n", __func__, ret);
mdelay(1);
}
static struct imx_ssi_platform_data pcm043_ssi_pdata = {
.ac97_reset = pcm043_ac97_cold_reset,
.ac97_warm_reset = pcm043_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
};
static struct mxc_nand_platform_data pcm037_nand_board_info = {
......@@ -212,6 +308,37 @@ static struct mxc_nand_platform_data pcm037_nand_board_info = {
.hw_ecc = 1,
};
static struct mxc_usbh_platform_data otg_pdata = {
.portsc = MXC_EHCI_MODE_UTMI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct mxc_usbh_platform_data usbh1_pdata = {
.portsc = MXC_EHCI_MODE_SERIAL,
.flags = MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY |
MXC_EHCI_IPPUE_DOWN,
};
static struct fsl_usb2_platform_data otg_device_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
};
static int otg_mode_host;
static int __init pcm043_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", pcm043_otg_mode);
/*
* Board specific initialization.
*/
......@@ -219,10 +346,23 @@ static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
mxc_audmux_v2_configure_port(3,
MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
MXC_AUDMUX_V2_PTCR_TFSEL(0) |
MXC_AUDMUX_V2_PTCR_TFSDIR,
MXC_AUDMUX_V2_PDCR_RXDSEL(0));
mxc_audmux_v2_configure_port(0,
MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */
MXC_AUDMUX_V2_PTCR_TCSEL(3) |
MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */
MXC_AUDMUX_V2_PDCR_RXDSEL(3));
platform_add_devices(devices, ARRAY_SIZE(devices));
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&imx_ssi_device0, &pcm043_ssi_pdata);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
......@@ -235,6 +375,20 @@ static void __init mxc_board_init(void)
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
mxc_register_device(&mx3_fb, &mx3fb_pdata);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
mxc_register_device(&mxc_usbh1, &usbh1_pdata);
#endif
if (!otg_mode_host)
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
static void __init pcm043_timer_init(void)
......
arch/arm/mach-mx3/mx31moboard-devboard.c
View file @ 9b1489e9
......@@ -49,6 +49,9 @@ static unsigned int devboard_pins[] = {
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct imxuart_platform_data uart_pdata = {
......@@ -108,6 +111,33 @@ static struct imxmmc_platform_data sdhc2_pdata = {
.exit = devboard_sdhc2_exit,
};
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void devboard_init_sel_gpios(void)
{
if (!gpio_request(SEL0, "sel0")) {
gpio_direction_input(SEL0);
gpio_export(SEL0, true);
}
if (!gpio_request(SEL1, "sel1")) {
gpio_direction_input(SEL1);
gpio_export(SEL1, true);
}
if (!gpio_request(SEL2, "sel2")) {
gpio_direction_input(SEL2);
gpio_export(SEL2, true);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
......@@ -196,5 +226,7 @@ void __init mx31moboard_devboard_init(void)
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
devboard_init_sel_gpios();
devboard_usbh1_init();
}
arch/arm/mach-mx3/mx31moboard-marxbot.c
View file @ 9b1489e9
......@@ -66,6 +66,9 @@ static unsigned int marxbot_pins[] = {
MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
/* SEL */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
......@@ -127,12 +130,12 @@ static struct imxmmc_platform_data sdhc2_pdata = {
static void dspics_resets_init(void)
{
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
gpio_direction_output(TRSLAT_RST_B, 1);
gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(DSPICS_RST_B, "dspics-rst")) {
gpio_direction_output(DSPICS_RST_B, 1);
gpio_direction_output(DSPICS_RST_B, 0);
gpio_export(DSPICS_RST_B, false);
}
}
......@@ -200,7 +203,7 @@ static int __init marxbot_cam_init(void)
int ret = gpio_request(CAM_CHOICE, "cam-choice");
if (ret)
return ret;
gpio_direction_output(CAM_CHOICE, 1);
gpio_direction_output(CAM_CHOICE, 0);
ret = gpio_request(BASECAM_RST_B, "basecam-reset");
if (ret)
......@@ -223,6 +226,34 @@ static int __init marxbot_cam_init(void)
return 0;
}
#define SEL0 IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define SEL1 IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define SEL2 IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void marxbot_init_sel_gpios(void)
{
if (!gpio_request(SEL0, "sel0")) {
gpio_direction_input(SEL0);
gpio_export(SEL0, true);
}
if (!gpio_request(SEL1, "sel1")) {
gpio_direction_input(SEL1);
gpio_export(SEL1, true);
}
if (!gpio_request(SEL2, "sel2")) {
gpio_direction_input(SEL2);
gpio_export(SEL2, true);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
......@@ -307,6 +338,8 @@ void __init mx31moboard_marxbot_init(void)
mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
"marxbot");
marxbot_init_sel_gpios();
dspics_resets_init();
mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
......
arch/arm/mach-mx3/mx31moboard-smartbot.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
#include <media/soc_camera.h>
#include "devices.h"
static unsigned int smartbot_pins[] = {
/* UART1 */
MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
/* CSI */
MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
/* ENABLES */
MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
};
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
#define CAM_POWER IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
#define CAM_RST_B IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
static int smartbot_cam_power(struct device *dev, int on)
{
gpio_set_value(CAM_POWER, !on);
return 0;
}
static int smartbot_cam_reset(struct device *dev)
{
gpio_set_value(CAM_RST_B, 0);
udelay(100);
gpio_set_value(CAM_RST_B, 1);
return 0;
}
static struct i2c_board_info smartbot_i2c_devices[] = {
{
I2C_BOARD_INFO("mt9t031", 0x5d),
},
};
static struct soc_camera_link base_iclink = {
.bus_id = 0, /* Must match with the camera ID */
.power = smartbot_cam_power,
.reset = smartbot_cam_reset,
.board_info = &smartbot_i2c_devices[0],
.i2c_adapter_id = 0,
.module_name = "mt9t031",
};
static struct platform_device smartbot_camera[] = {
{
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &base_iclink,
},
},
};
static struct platform_device *smartbot_cameras[] __initdata = {
&smartbot_camera[0],
};
static int __init smartbot_cam_init(void)
{
int ret = gpio_request(CAM_RST_B, "cam-reset");
if (ret)
return ret;
gpio_direction_output(CAM_RST_B, 1);
ret = gpio_request(CAM_POWER, "cam-standby");
if (ret)
return ret;
gpio_direction_output(CAM_POWER, 0);
return 0;
}
#define POWER_EN IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1)
#define DSPIC_RST_B IOMUX_TO_GPIO(MX31_PIN_DSR_DCE1)
#define TRSLAT_RST_B IOMUX_TO_GPIO(MX31_PIN_RI_DCE1)
#define SEL3 IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1)
static void smartbot_resets_init(void)
{
if (!gpio_request(POWER_EN, "power-enable")) {
gpio_direction_output(POWER_EN, 0);
gpio_export(POWER_EN, false);
}
if (!gpio_request(DSPIC_RST_B, "dspic-rst")) {
gpio_direction_output(DSPIC_RST_B, 0);
gpio_export(DSPIC_RST_B, false);
}
if (!gpio_request(TRSLAT_RST_B, "translator-rst")) {
gpio_direction_output(TRSLAT_RST_B, 0);
gpio_export(TRSLAT_RST_B, false);
}
if (!gpio_request(SEL3, "sel3")) {
gpio_direction_input(SEL3);
gpio_export(SEL3, true);
}
}
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_smartbot_init(void)
{
printk(KERN_INFO "Initializing mx31smartbot peripherals\n");
mxc_iomux_setup_multiple_pins(smartbot_pins, ARRAY_SIZE(smartbot_pins),
"smartbot");
mxc_register_device(&mxc_uart_device1, &uart_pdata);
smartbot_resets_init();
smartbot_cam_init();
platform_add_devices(smartbot_cameras, ARRAY_SIZE(smartbot_cameras));
}
arch/arm/mach-mx5/Kconfig 0 → 100644
View file @ 9b1489e9
if ARCH_MX5
config ARCH_MX51
bool
default y
select MXC_TZIC
select ARCH_MXC_IOMUX_V3
comment "MX5 platforms:"
config MACH_MX51_BABBAGE
bool "Support MX51 BABBAGE platforms"
help
Include support for MX51 Babbage platform, also known as MX51EVK in
u-boot. This includes specific configurations for the board and its
peripherals.
endif
arch/arm/mach-mx5/Makefile 0 → 100644
View file @ 9b1489e9
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := cpu.o mm.o clock-mx51.o devices.o
obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
arch/arm/mach-mx5/Makefile.boot 0 → 100644
View file @ 9b1489e9
zreladdr-y := 0x90008000
params_phys-y := 0x90000100
initrd_phys-y := 0x90800000
arch/arm/mach-mx5/board-mx51_babbage.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx51.h>
#include <asm/irq.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "devices.h"
static struct platform_device *devices[] __initdata = {
&mxc_fec_device,
};
static struct pad_desc mx51babbage_pads[] = {
/* UART1 */
MX51_PAD_UART1_RXD__UART1_RXD,
MX51_PAD_UART1_TXD__UART1_TXD,
MX51_PAD_UART1_RTS__UART1_RTS,
MX51_PAD_UART1_CTS__UART1_CTS,
/* UART2 */
MX51_PAD_UART2_RXD__UART2_RXD,
MX51_PAD_UART2_TXD__UART2_TXD,
/* UART3 */
MX51_PAD_EIM_D25__UART3_RXD,
MX51_PAD_EIM_D26__UART3_TXD,
MX51_PAD_EIM_D27__UART3_RTS,
MX51_PAD_EIM_D24__UART3_CTS,
};
/* Serial ports */
#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
static inline void mxc_init_imx_uart(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
}
#else /* !SERIAL_IMX */
static inline void mxc_init_imx_uart(void)
{
}
#endif /* SERIAL_IMX */
/*
* Board specific initialization.
*/
static void __init mxc_board_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
ARRAY_SIZE(mx51babbage_pads));
mxc_init_imx_uart();
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init mx51_babbage_timer_init(void)
{
mx51_clocks_init(32768, 24000000, 22579200, 0);
}
static struct sys_timer mxc_timer = {
.init = mx51_babbage_timer_init,
};
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
.phys_io = MX51_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX51_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.map_io = mx51_map_io,
.init_irq = mx51_init_irq,
.init_machine = mxc_board_init,
.timer = &mxc_timer,
MACHINE_END
arch/arm/mach-mx5/clock-mx51.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <asm/clkdev.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/clock.h>
#include "crm_regs.h"
/* External clock values passed-in by the board code */
static unsigned long external_high_reference, external_low_reference;
static unsigned long oscillator_reference, ckih2_reference;
static struct clk osc_clk;
static struct clk pll1_main_clk;
static struct clk pll1_sw_clk;
static struct clk pll2_sw_clk;
static struct clk pll3_sw_clk;
static struct clk lp_apm_clk;
static struct clk periph_apm_clk;
static struct clk ahb_clk;
static struct clk ipg_clk;
#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
static int _clk_ccgr_enable(struct clk *clk)
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
reg |= MXC_CCM_CCGRx_MOD_ON << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
return 0;
}
static void _clk_ccgr_disable(struct clk *clk)
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
reg &= ~(MXC_CCM_CCGRx_MOD_OFF << clk->enable_shift);
__raw_writel(reg, clk->enable_reg);
}
static void _clk_ccgr_disable_inwait(struct clk *clk)
{
u32 reg;
reg = __raw_readl(clk->enable_reg);
reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
reg |= MXC_CCM_CCGRx_MOD_IDLE << clk->enable_shift;
__raw_writel(reg, clk->enable_reg);
}
/*
* For the 4-to-1 muxed input clock
*/
static inline u32 _get_mux(struct clk *parent, struct clk *m0,
struct clk *m1, struct clk *m2, struct clk *m3)
{
if (parent == m0)
return 0;
else if (parent == m1)
return 1;
else if (parent == m2)
return 2;
else if (parent == m3)
return 3;
else
BUG();
return -EINVAL;
}
static inline void __iomem *_get_pll_base(struct clk *pll)
{
if (pll == &pll1_main_clk)
return MX51_DPLL1_BASE;
else if (pll == &pll2_sw_clk)
return MX51_DPLL2_BASE;
else if (pll == &pll3_sw_clk)
return MX51_DPLL3_BASE;
else
BUG();
return NULL;
}
static unsigned long clk_pll_get_rate(struct clk *clk)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
void __iomem *pllbase;
s64 temp;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
pllbase = _get_pll_base(clk);
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
if (pll_hfsm == 0) {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
} else {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
}
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
/* Sign extend to 32-bits */
if (mfn >= 0x04000000) {
mfn |= 0xFC000000;
mfn_abs = -mfn;
}
ref_clk = 2 * parent_rate;
if (dbl != 0)
ref_clk *= 2;
ref_clk /= (pdf + 1);
temp = (u64) ref_clk * mfn_abs;
do_div(temp, mfd + 1);
if (mfn < 0)
temp = -temp;
temp = (ref_clk * mfi) + temp;
return temp;
}
static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg;
void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
unsigned long pll_hfsm, dp_ctl;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
pllbase = _get_pll_base(clk);
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
while (++pdf < 16 && mfi < 5)
mfi = rate * (pdf+1) / quad_parent_rate;
if (mfi > 15)
return -EINVAL;
pdf--;
temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
do_div(temp64, quad_parent_rate/1000000);
mfn = (long)temp64;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
if (pll_hfsm == 0) {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
} else {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
}
return 0;
}
static int _clk_pll_enable(struct clk *clk)
{
u32 reg;
void __iomem *pllbase;
int i = 0;
pllbase = _get_pll_base(clk);
reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
/* Wait for lock */
do {
reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
if (reg & MXC_PLL_DP_CTL_LRF)
break;
udelay(1);
} while (++i < MAX_DPLL_WAIT_TRIES);
if (i == MAX_DPLL_WAIT_TRIES) {
pr_err("MX5: pll locking failed\n");
return -EINVAL;
}
return 0;
}
static void _clk_pll_disable(struct clk *clk)
{
u32 reg;
void __iomem *pllbase;
pllbase = _get_pll_base(clk);
reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
}
static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, step;
reg = __raw_readl(MXC_CCM_CCSR);
/* When switching from pll_main_clk to a bypass clock, first select a
* multiplexed clock in 'step_sel', then shift the glitchless mux
* 'pll1_sw_clk_sel'.
*
* When switching back, do it in reverse order
*/
if (parent == &pll1_main_clk) {
/* Switch to pll1_main_clk */
reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
__raw_writel(reg, MXC_CCM_CCSR);
/* step_clk mux switched to lp_apm, to save power. */
reg = __raw_readl(MXC_CCM_CCSR);
reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
MXC_CCM_CCSR_STEP_SEL_OFFSET);
} else {
if (parent == &lp_apm_clk) {
step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
} else if (parent == &pll2_sw_clk) {
step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
} else if (parent == &pll3_sw_clk) {
step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
} else
return -EINVAL;
reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
__raw_writel(reg, MXC_CCM_CCSR);
/* Switch to step_clk */
reg = __raw_readl(MXC_CCM_CCSR);
reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
}
__raw_writel(reg, MXC_CCM_CCSR);
return 0;
}
static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
{
u32 reg, div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
reg = __raw_readl(MXC_CCM_CCSR);
if (clk->parent == &pll2_sw_clk) {
div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
} else if (clk->parent == &pll3_sw_clk) {
div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
} else
div = 1;
return parent_rate / div;
}
static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg;
reg = __raw_readl(MXC_CCM_CCSR);
if (parent == &pll2_sw_clk)
reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
else
reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
__raw_writel(reg, MXC_CCM_CCSR);
return 0;
}
static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg;
if (parent == &osc_clk)
reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
else
return -EINVAL;
__raw_writel(reg, MXC_CCM_CCSR);
return 0;
}
static unsigned long clk_arm_get_rate(struct clk *clk)
{
u32 cacrr, div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
cacrr = __raw_readl(MXC_CCM_CACRR);
div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
return parent_rate / div;
}
static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, mux;
int i = 0;
mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
__raw_writel(reg, MXC_CCM_CBCMR);
/* Wait for lock */
do {
reg = __raw_readl(MXC_CCM_CDHIPR);
if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
break;
udelay(1);
} while (++i < MAX_DPLL_WAIT_TRIES);
if (i == MAX_DPLL_WAIT_TRIES) {
pr_err("MX5: Set parent for periph_apm clock failed\n");
return -EINVAL;
}
return 0;
}
static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg;
reg = __raw_readl(MXC_CCM_CBCDR);
if (parent == &pll2_sw_clk)
reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
else if (parent == &periph_apm_clk)
reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
else
return -EINVAL;
__raw_writel(reg, MXC_CCM_CBCDR);
return 0;
}
static struct clk main_bus_clk = {
.parent = &pll2_sw_clk,
.set_parent = _clk_main_bus_set_parent,
};
static unsigned long clk_ahb_get_rate(struct clk *clk)
{
u32 reg, div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
reg = __raw_readl(MXC_CCM_CBCDR);
div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
return parent_rate / div;
}
static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
{
u32 reg, div;
unsigned long parent_rate;
int i = 0;
parent_rate = clk_get_rate(clk->parent);
div = parent_rate / rate;
if (div > 8 || div < 1 || ((parent_rate / div) != rate))
return -EINVAL;
reg = __raw_readl(MXC_CCM_CBCDR);
reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
__raw_writel(reg, MXC_CCM_CBCDR);
/* Wait for lock */
do {
reg = __raw_readl(MXC_CCM_CDHIPR);
if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
break;
udelay(1);
} while (++i < MAX_DPLL_WAIT_TRIES);
if (i == MAX_DPLL_WAIT_TRIES) {
pr_err("MX5: clk_ahb_set_rate failed\n");
return -EINVAL;
}
return 0;
}
static unsigned long _clk_ahb_round_rate(struct clk *clk,
unsigned long rate)
{
u32 div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
div = parent_rate / rate;
if (div > 8)
div = 8;
else if (div == 0)
div++;
return parent_rate / div;
}
static int _clk_max_enable(struct clk *clk)
{
u32 reg;
_clk_ccgr_enable(clk);
/* Handshake with MAX when LPM is entered. */
reg = __raw_readl(MXC_CCM_CLPCR);
reg &= ~MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
return 0;
}
static void _clk_max_disable(struct clk *clk)
{
u32 reg;
_clk_ccgr_disable_inwait(clk);
/* No Handshake with MAX when LPM is entered as its disabled. */
reg = __raw_readl(MXC_CCM_CLPCR);
reg |= MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS;
__raw_writel(reg, MXC_CCM_CLPCR);
}
static unsigned long clk_ipg_get_rate(struct clk *clk)
{
u32 reg, div;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
reg = __raw_readl(MXC_CCM_CBCDR);
div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
return parent_rate / div;
}
static unsigned long clk_ipg_per_get_rate(struct clk *clk)
{
u32 reg, prediv1, prediv2, podf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
/* the main_bus_clk is the one before the DVFS engine */
reg = __raw_readl(MXC_CCM_CBCDR);
prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
return parent_rate / (prediv1 * prediv2 * podf);
} else if (clk->parent == &ipg_clk)
return parent_rate;
else
BUG();
}
static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg;
reg = __raw_readl(MXC_CCM_CBCMR);
reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
if (parent == &ipg_clk)
reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
else if (parent == &lp_apm_clk)
reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
else if (parent != &main_bus_clk)
return -EINVAL;
__raw_writel(reg, MXC_CCM_CBCMR);
return 0;
}
static unsigned long clk_uart_get_rate(struct clk *clk)
{
u32 reg, prediv, podf;
unsigned long parent_rate;
parent_rate = clk_get_rate(clk->parent);
reg = __raw_readl(MXC_CCM_CSCDR1);
prediv = ((reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >>
MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET) + 1;
podf = ((reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >>
MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET) + 1;
return parent_rate / (prediv * podf);
}
static int _clk_uart_set_parent(struct clk *clk, struct clk *parent)
{
u32 reg, mux;
mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, &pll3_sw_clk,
&lp_apm_clk);
reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_UART_CLK_SEL_MASK;
reg |= mux << MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET;
__raw_writel(reg, MXC_CCM_CSCMR1);
return 0;
}
static unsigned long get_high_reference_clock_rate(struct clk *clk)
{
return external_high_reference;
}
static unsigned long get_low_reference_clock_rate(struct clk *clk)
{
return external_low_reference;
}
static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
{
return oscillator_reference;
}
static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
{
return ckih2_reference;
}
/* External high frequency clock */
static struct clk ckih_clk = {
.get_rate = get_high_reference_clock_rate,
};
static struct clk ckih2_clk = {
.get_rate = get_ckih2_reference_clock_rate,
};
static struct clk osc_clk = {
.get_rate = get_oscillator_reference_clock_rate,
};
/* External low frequency (32kHz) clock */
static struct clk ckil_clk = {
.get_rate = get_low_reference_clock_rate,
};
static struct clk pll1_main_clk = {
.parent = &osc_clk,
.get_rate = clk_pll_get_rate,
.enable = _clk_pll_enable,
.disable = _clk_pll_disable,
};
/* Clock tree block diagram (WIP):
* CCM: Clock Controller Module
*
* PLL output -> |
* | CCM Switcher -> CCM_CLK_ROOT_GEN ->
* PLL bypass -> |
*
*/
/* PLL1 SW supplies to ARM core */
static struct clk pll1_sw_clk = {
.parent = &pll1_main_clk,
.set_parent = _clk_pll1_sw_set_parent,
.get_rate = clk_pll1_sw_get_rate,
};
/* PLL2 SW supplies to AXI/AHB/IP buses */
static struct clk pll2_sw_clk = {
.parent = &osc_clk,
.get_rate = clk_pll_get_rate,
.set_rate = _clk_pll_set_rate,
.set_parent = _clk_pll2_sw_set_parent,
.enable = _clk_pll_enable,
.disable = _clk_pll_disable,
};
/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
static struct clk pll3_sw_clk = {
.parent = &osc_clk,
.set_rate = _clk_pll_set_rate,
.get_rate = clk_pll_get_rate,
.enable = _clk_pll_enable,
.disable = _clk_pll_disable,
};
/* Low-power Audio Playback Mode clock */
static struct clk lp_apm_clk = {
.parent = &osc_clk,
.set_parent = _clk_lp_apm_set_parent,
};
static struct clk periph_apm_clk = {
.parent = &pll1_sw_clk,
.set_parent = _clk_periph_apm_set_parent,
};
static struct clk cpu_clk = {
.parent = &pll1_sw_clk,
.get_rate = clk_arm_get_rate,
};
static struct clk ahb_clk = {
.parent = &main_bus_clk,
.get_rate = clk_ahb_get_rate,
.set_rate = _clk_ahb_set_rate,
.round_rate = _clk_ahb_round_rate,
};
/* Main IP interface clock for access to registers */
static struct clk ipg_clk = {
.parent = &ahb_clk,
.get_rate = clk_ipg_get_rate,
};
static struct clk ipg_perclk = {
.parent = &lp_apm_clk,
.get_rate = clk_ipg_per_get_rate,
.set_parent = _clk_ipg_per_set_parent,
};
static struct clk uart_root_clk = {
.parent = &pll2_sw_clk,
.get_rate = clk_uart_get_rate,
.set_parent = _clk_uart_set_parent,
};
static struct clk ahb_max_clk = {
.parent = &ahb_clk,
.enable_reg = MXC_CCM_CCGR0,
.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
.enable = _clk_max_enable,
.disable = _clk_max_disable,
};
static struct clk aips_tz1_clk = {
.parent = &ahb_clk,
.secondary = &ahb_max_clk,
.enable_reg = MXC_CCM_CCGR0,
.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
.enable = _clk_ccgr_enable,
.disable = _clk_ccgr_disable_inwait,
};
static struct clk aips_tz2_clk = {
.parent = &ahb_clk,
.secondary = &ahb_max_clk,
.enable_reg = MXC_CCM_CCGR0,
.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
.enable = _clk_ccgr_enable,
.disable = _clk_ccgr_disable_inwait,
};
static struct clk gpt_32k_clk = {
.id = 0,
.parent = &ckil_clk,
};
#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
static struct clk name = { \
.id = i, \
.enable_reg = er, \
.enable_shift = es, \
.get_rate = gr, \
.set_rate = sr, \
.enable = _clk_ccgr_enable, \
.disable = _clk_ccgr_disable, \
.parent = p, \
.secondary = s, \
}
/* DEFINE_CLOCK(name, id, enable_reg, enable_shift,
get_rate, set_rate, parent, secondary); */
/* Shared peripheral bus arbiter */
DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
NULL, NULL, &ipg_clk, NULL);
/* UART */
DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
NULL, NULL, &uart_root_clk, NULL);
DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
NULL, NULL, &uart_root_clk, NULL);
DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
NULL, NULL, &uart_root_clk, NULL);
DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
NULL, NULL, &ipg_clk, &aips_tz1_clk);
DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
NULL, NULL, &ipg_clk, &spba_clk);
/* GPT */
DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
NULL, NULL, &ipg_perclk, NULL);
DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
NULL, NULL, &ipg_clk, NULL);
/* FEC */
DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
NULL, NULL, &ipg_clk, NULL);
#define _REGISTER_CLOCK(d, n, c) \
{ \
.dev_id = d, \
.con_id = n, \
.clk = &c, \
},
static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
};
static void clk_tree_init(void)
{
u32 reg;
ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
/*
* Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
* 8MHz, its derived from lp_apm.
*
* FIXME: Verify if true for all boards
*/
reg = __raw_readl(MXC_CCM_CBCDR);
reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
__raw_writel(reg, MXC_CCM_CBCDR);
}
int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2)
{
int i;
external_low_reference = ckil;
external_high_reference = ckih1;
ckih2_reference = ckih2;
oscillator_reference = osc;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
clk_tree_init();
clk_enable(&cpu_clk);
clk_enable(&main_bus_clk);
/* System timer */
mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
MX51_MXC_INT_GPT);
return 0;
}
arch/arm/mach-mx5/cpu.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*
* This file contains the CPU initialization code.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <asm/io.h>
static int __init post_cpu_init(void)
{
unsigned int reg;
void __iomem *base;
if (!cpu_is_mx51())
return 0;
base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
__raw_writel(0x0, base + 0x40);
__raw_writel(0x0, base + 0x44);
__raw_writel(0x0, base + 0x48);
__raw_writel(0x0, base + 0x4C);
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
__raw_writel(0x0, base + 0x40);
__raw_writel(0x0, base + 0x44);
__raw_writel(0x0, base + 0x48);
__raw_writel(0x0, base + 0x4C);
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
return 0;
}
postcore_initcall(post_cpu_init);
arch/arm/mach-mx5/crm_regs.h 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
#define MX51_CCM_BASE MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
#define MX51_DPLL1_BASE MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
#define MX51_DPLL2_BASE MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
#define MX51_DPLL3_BASE MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
#define MX51_CORTEXA8_BASE MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
#define MX51_GPC_BASE MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
#define MXC_PLL_DP_CONFIG 0x04
#define MXC_PLL_DP_OP 0x08
#define MXC_PLL_DP_MFD 0x0C
#define MXC_PLL_DP_MFN 0x10
#define MXC_PLL_DP_MFNMINUS 0x14
#define MXC_PLL_DP_MFNPLUS 0x18
#define MXC_PLL_DP_HFS_OP 0x1C
#define MXC_PLL_DP_HFS_MFD 0x20
#define MXC_PLL_DP_HFS_MFN 0x24
#define MXC_PLL_DP_MFN_TOGC 0x28
#define MXC_PLL_DP_DESTAT 0x2c
/* PLL Register Bit definitions */
#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
#define MXC_PLL_DP_CTL_ADE 0x800
#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
#define MXC_PLL_DP_CTL_HFSM 0x80
#define MXC_PLL_DP_CTL_PRE 0x40
#define MXC_PLL_DP_CTL_UPEN 0x20
#define MXC_PLL_DP_CTL_RST 0x10
#define MXC_PLL_DP_CTL_RCP 0x8
#define MXC_PLL_DP_CTL_PLM 0x4
#define MXC_PLL_DP_CTL_BRM0 0x2
#define MXC_PLL_DP_CTL_LRF 0x1
#define MXC_PLL_DP_CONFIG_BIST 0x8
#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
#define MXC_PLL_DP_CONFIG_AREN 0x2
#define MXC_PLL_DP_CONFIG_LDREQ 0x1
#define MXC_PLL_DP_OP_MFI_OFFSET 4
#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
#define MXC_PLL_DP_OP_PDF_OFFSET 0
#define MXC_PLL_DP_OP_PDF_MASK 0xF
#define MXC_PLL_DP_MFD_OFFSET 0
#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
#define MXC_PLL_DP_MFN_OFFSET 0x0
#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
/* Register addresses of CCM*/
#define MXC_CCM_CCR (MX51_CCM_BASE + 0x00)
#define MXC_CCM_CCDR (MX51_CCM_BASE + 0x04)
#define MXC_CCM_CSR (MX51_CCM_BASE + 0x08)
#define MXC_CCM_CCSR (MX51_CCM_BASE + 0x0C)
#define MXC_CCM_CACRR (MX51_CCM_BASE + 0x10)
#define MXC_CCM_CBCDR (MX51_CCM_BASE + 0x14)
#define MXC_CCM_CBCMR (MX51_CCM_BASE + 0x18)
#define MXC_CCM_CSCMR1 (MX51_CCM_BASE + 0x1C)
#define MXC_CCM_CSCMR2 (MX51_CCM_BASE + 0x20)
#define MXC_CCM_CSCDR1 (MX51_CCM_BASE + 0x24)
#define MXC_CCM_CS1CDR (MX51_CCM_BASE + 0x28)
#define MXC_CCM_CS2CDR (MX51_CCM_BASE + 0x2C)
#define MXC_CCM_CDCDR (MX51_CCM_BASE + 0x30)
#define MXC_CCM_CHSCDR (MX51_CCM_BASE + 0x34)
#define MXC_CCM_CSCDR2 (MX51_CCM_BASE + 0x38)
#define MXC_CCM_CSCDR3 (MX51_CCM_BASE + 0x3C)
#define MXC_CCM_CSCDR4 (MX51_CCM_BASE + 0x40)
#define MXC_CCM_CWDR (MX51_CCM_BASE + 0x44)
#define MXC_CCM_CDHIPR (MX51_CCM_BASE + 0x48)
#define MXC_CCM_CDCR (MX51_CCM_BASE + 0x4C)
#define MXC_CCM_CTOR (MX51_CCM_BASE + 0x50)
#define MXC_CCM_CLPCR (MX51_CCM_BASE + 0x54)
#define MXC_CCM_CISR (MX51_CCM_BASE + 0x58)
#define MXC_CCM_CIMR (MX51_CCM_BASE + 0x5C)
#define MXC_CCM_CCOSR (MX51_CCM_BASE + 0x60)
#define MXC_CCM_CGPR (MX51_CCM_BASE + 0x64)
#define MXC_CCM_CCGR0 (MX51_CCM_BASE + 0x68)
#define MXC_CCM_CCGR1 (MX51_CCM_BASE + 0x6C)
#define MXC_CCM_CCGR2 (MX51_CCM_BASE + 0x70)
#define MXC_CCM_CCGR3 (MX51_CCM_BASE + 0x74)
#define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78)
#define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C)
#define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80)
#define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84)
/* Define the bits in register CCR */
#define MXC_CCM_CCR_COSC_EN (1 << 12)
#define MXC_CCM_CCR_FPM_MULT_MASK (1 << 11)
#define MXC_CCM_CCR_CAMP2_EN (1 << 10)
#define MXC_CCM_CCR_CAMP1_EN (1 << 9)
#define MXC_CCM_CCR_FPM_EN (1 << 8)
#define MXC_CCM_CCR_OSCNT_OFFSET (0)
#define MXC_CCM_CCR_OSCNT_MASK (0xFF)
/* Define the bits in register CCDR */
#define MXC_CCM_CCDR_HSC_HS_MASK (0x1 << 18)
#define MXC_CCM_CCDR_IPU_HS_MASK (0x1 << 17)
#define MXC_CCM_CCDR_EMI_HS_MASK (0x1 << 16)
/* Define the bits in register CSR */
#define MXC_CCM_CSR_COSR_READY (1 << 5)
#define MXC_CCM_CSR_LVS_VALUE (1 << 4)
#define MXC_CCM_CSR_CAMP2_READY (1 << 3)
#define MXC_CCM_CSR_CAMP1_READY (1 << 2)
#define MXC_CCM_CSR_FPM_READY (1 << 1)
#define MXC_CCM_CSR_REF_EN_B (1 << 0)
/* Define the bits in register CCSR */
#define MXC_CCM_CCSR_LP_APM_SEL (0x1 << 9)
#define MXC_CCM_CCSR_STEP_SEL_OFFSET (7)
#define MXC_CCM_CCSR_STEP_SEL_MASK (0x3 << 7)
#define MXC_CCM_CCSR_STEP_SEL_LP_APM 0
#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS 1 /* Only when JTAG connected? */
#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
#define MXC_CCM_CCSR_PLL2_PODF_OFFSET (5)
#define MXC_CCM_CCSR_PLL2_PODF_MASK (0x3 << 5)
#define MXC_CCM_CCSR_PLL3_PODF_OFFSET (3)
#define MXC_CCM_CCSR_PLL3_PODF_MASK (0x3 << 3)
#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL (1 << 2) /* 0: pll1_main_clk,
1: step_clk */
#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL (1 << 1)
#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL (1 << 0)
/* Define the bits in register CACRR */
#define MXC_CCM_CACRR_ARM_PODF_OFFSET (0)
#define MXC_CCM_CACRR_ARM_PODF_MASK (0x7)
/* Define the bits in register CBCDR */
#define MXC_CCM_CBCDR_EMI_CLK_SEL (0x1 << 26)
#define MXC_CCM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET (30)
#define MXC_CCM_CBCDR_DDR_HF_SEL (0x1 << 30)
#define MXC_CCM_CBCDR_DDR_PODF_OFFSET (27)
#define MXC_CCM_CBCDR_DDR_PODF_MASK (0x7 << 27)
#define MXC_CCM_CBCDR_EMI_PODF_OFFSET (22)
#define MXC_CCM_CBCDR_EMI_PODF_MASK (0x7 << 22)
#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET (19)
#define MXC_CCM_CBCDR_AXI_B_PODF_MASK (0x7 << 19)
#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET (16)
#define MXC_CCM_CBCDR_AXI_A_PODF_MASK (0x7 << 16)
#define MXC_CCM_CBCDR_NFC_PODF_OFFSET (13)
#define MXC_CCM_CBCDR_NFC_PODF_MASK (0x7 << 13)
#define MXC_CCM_CBCDR_AHB_PODF_OFFSET (10)
#define MXC_CCM_CBCDR_AHB_PODF_MASK (0x7 << 10)
#define MXC_CCM_CBCDR_IPG_PODF_OFFSET (8)
#define MXC_CCM_CBCDR_IPG_PODF_MASK (0x3 << 8)
#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET (6)
#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK (0x3 << 6)
#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET (3)
#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK (0x7 << 3)
#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET (0)
#define MXC_CCM_CBCDR_PERCLK_PODF_MASK (0x7)
/* Define the bits in register CBCMR */
#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET (14)
#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK (0x3 << 14)
#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET (12)
#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK (0x3 << 12)
#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET (10)
#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK (0x3 << 10)
#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET (8)
#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK (0x3 << 8)
#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET (6)
#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK (0x3 << 6)
#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET (4)
#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK (0x3 << 4)
#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET (14)
#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK (0x3 << 14)
#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL (0x1 << 1)
#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL (0x1 << 0)
/* Define the bits in register CSCMR1 */
#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET (30)
#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK (0x3 << 30)
#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET (28)
#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK (0x3 << 28)
#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET (26)
#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL (0x1 << 26)
#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET (24)
#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK (0x3 << 24)
#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET (22)
#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK (0x3 << 22)
#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET (20)
#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK (0x3 << 20)
#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL (0x1 << 19)
#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL (0x1 << 18)
#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET (16)
#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK (0x3 << 16)
#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET (14)
#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK (0x3 << 14)
#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET (12)
#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK (0x3 << 12)
#define MXC_CCM_CSCMR1_SSI3_CLK_SEL (0x1 << 11)
#define MXC_CCM_CSCMR1_VPU_RCLK_SEL (0x1 << 10)
#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET (8)
#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK (0x3 << 8)
#define MXC_CCM_CSCMR1_TVE_CLK_SEL (0x1 << 7)
#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL (0x1 << 6)
#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET (4)
#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK (0x3 << 4)
#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET (2)
#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK (0x3 << 2)
#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL (0x1 << 1)
#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL (0x1)
/* Define the bits in register CSCMR2 */
#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n) (26+n*3)
#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n) (0x7 << (26+n*3))
#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET (24)
#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK (0x3 << 24)
#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET (22)
#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK (0x3 << 22)
#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET (20)
#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK (0x3 << 20)
#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET (18)
#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK (0x3 << 18)
#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET (16)
#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK (0x3 << 16)
#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET (14)
#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK (0x3 << 14)
#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET (12)
#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK (0x3 << 12)
#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET (10)
#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK (0x3 << 10)
#define MXC_CCM_CSCMR2_SLIMBUS_COM (0x1 << 9)
#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET (6)
#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK (0x7 << 6)
#define MXC_CCM_CSCMR2_SPDIF1_COM (1 << 5)
#define MXC_CCM_CSCMR2_SPDIF0_COM (1 << 4)
#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET (2)
#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK (0x3 << 2)
#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET (0)
#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK (0x3)
/* Define the bits in register CSCDR1 */
#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET (22)
#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK (0x7 << 22)
#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET (19)
#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK (0x7 << 19)
#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET (16)
#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK (0x7 << 16)
#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET (14)
#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK (0x3 << 14)
#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET (11)
#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK (0x7 << 11)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET (8)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK (0x7 << 8)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET (6)
#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK (0x3 << 6)
#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET (3)
#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK (0x7 << 3)
#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET (0)
#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK (0x7)
/* Define the bits in register CS1CDR and CS2CDR */
#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET (22)
#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK (0x7 << 22)
#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET (16)
#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK (0x3F << 16)
#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET (6)
#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK (0x7 << 6)
#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET (0)
#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK (0x3F)
#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET (22)
#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK (0x7 << 22)
#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET (16)
#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK (0x3F << 16)
#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET (6)
#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK (0x7 << 6)
#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET (0)
#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK (0x3F)
/* Define the bits in register CDCDR */
#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET (28)
#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK (0x7 << 28)
#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET (25)
#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK (0x7 << 25)
#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET (19)
#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK (0x3F << 19)
#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET (16)
#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK (0x7 << 16)
#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET (9)
#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK (0x3F << 9)
#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET (6)
#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK (0x7 << 6)
#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET (3)
#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK (0x7 << 3)
#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET (0)
#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK (0x7)
/* Define the bits in register CHSCCDR */
#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET (12)
#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK (0x7 << 12)
#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET (6)
#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK (0x3F << 6)
#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET (3)
#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK (0x7 << 3)
#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET (0)
#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK (0x7)
/* Define the bits in register CSCDR2 */
#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET (25)
#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK (0x7 << 25)
#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET (19)
#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK (0x3F << 19)
#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET (16)
#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK (0x7 << 16)
#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET (9)
#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK (0x3F << 9)
#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET (6)
#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK (0x7 << 6)
#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET (0)
#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK (0x3F)
/* Define the bits in register CSCDR3 */
#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET (16)
#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK (0x7 << 16)
#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET (9)
#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK (0x3F << 9)
#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET (6)
#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK (0x7 << 6)
#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET (0)
#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK (0x3F)
/* Define the bits in register CSCDR4 */
#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET (16)
#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK (0x7 << 16)
#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET (9)
#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK (0x3F << 9)
#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET (6)
#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK (0x7 << 6)
#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET (0)
#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK (0x3F)
/* Define the bits in register CDHIPR */
#define MXC_CCM_CDHIPR_ARM_PODF_BUSY (1 << 16)
#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY (1 << 8)
#define MXC_CCM_CDHIPR_DDR_PODF_BUSY (1 << 7)
#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY (1 << 6)
#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY (1 << 5)
#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY (1 << 4)
#define MXC_CCM_CDHIPR_AHB_PODF_BUSY (1 << 3)
#define MXC_CCM_CDHIPR_EMI_PODF_BUSY (1 << 2)
#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY (1 << 1)
#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY (1 << 0)
/* Define the bits in register CDCR */
#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER (0x1 << 2)
#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET (0)
#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK (0x3)
/* Define the bits in register CLPCR */
#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS (0x1 << 23)
#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS (0x1 << 22)
#define MXC_CCM_CLPCR_BYPASS_MAX_LPM_HS (0x1 << 21)
#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS (0x1 << 20)
#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS (0x1 << 19)
#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS (0x1 << 18)
#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS (0x1 << 17)
#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS (0x1 << 16)
#define MXC_CCM_CLPCR_COSC_PWRDOWN (0x1 << 11)
#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET (9)
#define MXC_CCM_CLPCR_STBY_COUNT_MASK (0x3 << 9)
#define MXC_CCM_CLPCR_VSTBY (0x1 << 8)
#define MXC_CCM_CLPCR_DIS_REF_OSC (0x1 << 7)
#define MXC_CCM_CLPCR_SBYOS (0x1 << 6)
#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET (3)
#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK (0x3 << 3)
#define MXC_CCM_CLPCR_LPM_OFFSET (0)
#define MXC_CCM_CLPCR_LPM_MASK (0x3)
/* Define the bits in register CISR */
#define MXC_CCM_CISR_ARM_PODF_LOADED (0x1 << 25)
#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
#define MXC_CCM_CISR_AHB_PODF_LOADED (0x1 << 20)
#define MXC_CCM_CISR_EMI_PODF_LOADED (0x1 << 19)
#define MXC_CCM_CISR_AXI_B_PODF_LOADED (0x1 << 18)
#define MXC_CCM_CISR_AXI_A_PODF_LOADED (0x1 << 17)
#define MXC_CCM_CISR_DIVIDER_LOADED (0x1 << 16)
#define MXC_CCM_CISR_COSC_READY (0x1 << 6)
#define MXC_CCM_CISR_CKIH2_READY (0x1 << 5)
#define MXC_CCM_CISR_CKIH_READY (0x1 << 4)
#define MXC_CCM_CISR_FPM_READY (0x1 << 3)
#define MXC_CCM_CISR_LRF_PLL3 (0x1 << 2)
#define MXC_CCM_CISR_LRF_PLL2 (0x1 << 1)
#define MXC_CCM_CISR_LRF_PLL1 (0x1)
/* Define the bits in register CIMR */
#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED (0x1 << 25)
#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED (0x1 << 21)
#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED (0x1 << 20)
#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED (0x1 << 19)
#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED (0x1 << 18)
#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED (0x1 << 17)
#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED (0x1 << 16)
#define MXC_CCM_CIMR_MASK_COSC_READY (0x1 << 5)
#define MXC_CCM_CIMR_MASK_CKIH_READY (0x1 << 4)
#define MXC_CCM_CIMR_MASK_FPM_READY (0x1 << 3)
#define MXC_CCM_CIMR_MASK_LRF_PLL3 (0x1 << 2)
#define MXC_CCM_CIMR_MASK_LRF_PLL2 (0x1 << 1)
#define MXC_CCM_CIMR_MASK_LRF_PLL1 (0x1)
/* Define the bits in register CCOSR */
#define MXC_CCM_CCOSR_CKO2_EN_OFFSET (0x1 << 24)
#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET (21)
#define MXC_CCM_CCOSR_CKO2_DIV_MASK (0x7 << 21)
#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET (16)
#define MXC_CCM_CCOSR_CKO2_SEL_MASK (0x1F << 16)
#define MXC_CCM_CCOSR_CKOL_EN (0x1 << 7)
#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET (4)
#define MXC_CCM_CCOSR_CKOL_DIV_MASK (0x7 << 4)
#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET (0)
#define MXC_CCM_CCOSR_CKOL_SEL_MASK (0xF)
/* Define the bits in registers CGPR */
#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE (0x1 << 4)
#define MXC_CCM_CGPR_FPM_SEL (0x1 << 3)
#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET (0)
#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK (0x7)
/* Define the bits in registers CCGRx */
#define MXC_CCM_CCGRx_CG_MASK 0x3
#define MXC_CCM_CCGRx_MOD_OFF 0x0
#define MXC_CCM_CCGRx_MOD_ON 0x3
#define MXC_CCM_CCGRx_MOD_IDLE 0x1
#define MXC_CCM_CCGRx_CG15_MASK (0x3 << 30)
#define MXC_CCM_CCGRx_CG14_MASK (0x3 << 28)
#define MXC_CCM_CCGRx_CG13_MASK (0x3 << 26)
#define MXC_CCM_CCGRx_CG12_MASK (0x3 << 24)
#define MXC_CCM_CCGRx_CG11_MASK (0x3 << 22)
#define MXC_CCM_CCGRx_CG10_MASK (0x3 << 20)
#define MXC_CCM_CCGRx_CG9_MASK (0x3 << 18)
#define MXC_CCM_CCGRx_CG8_MASK (0x3 << 16)
#define MXC_CCM_CCGRx_CG5_MASK (0x3 << 10)
#define MXC_CCM_CCGRx_CG4_MASK (0x3 << 8)
#define MXC_CCM_CCGRx_CG3_MASK (0x3 << 6)
#define MXC_CCM_CCGRx_CG2_MASK (0x3 << 4)
#define MXC_CCM_CCGRx_CG1_MASK (0x3 << 2)
#define MXC_CCM_CCGRx_CG0_MASK (0x3 << 0)
#define MXC_CCM_CCGRx_CG15_OFFSET 30
#define MXC_CCM_CCGRx_CG14_OFFSET 28
#define MXC_CCM_CCGRx_CG13_OFFSET 26
#define MXC_CCM_CCGRx_CG12_OFFSET 24
#define MXC_CCM_CCGRx_CG11_OFFSET 22
#define MXC_CCM_CCGRx_CG10_OFFSET 20
#define MXC_CCM_CCGRx_CG9_OFFSET 18
#define MXC_CCM_CCGRx_CG8_OFFSET 16
#define MXC_CCM_CCGRx_CG7_OFFSET 14
#define MXC_CCM_CCGRx_CG6_OFFSET 12
#define MXC_CCM_CCGRx_CG5_OFFSET 10
#define MXC_CCM_CCGRx_CG4_OFFSET 8
#define MXC_CCM_CCGRx_CG3_OFFSET 6
#define MXC_CCM_CCGRx_CG2_OFFSET 4
#define MXC_CCM_CCGRx_CG1_OFFSET 2
#define MXC_CCM_CCGRx_CG0_OFFSET 0
#define MXC_DPTC_LP_BASE (MX51_GPC_BASE + 0x80)
#define MXC_DPTC_GP_BASE (MX51_GPC_BASE + 0x100)
#define MXC_DVFS_CORE_BASE (MX51_GPC_BASE + 0x180)
#define MXC_DPTC_PER_BASE (MX51_GPC_BASE + 0x1C0)
#define MXC_PGC_IPU_BASE (MX51_GPC_BASE + 0x220)
#define MXC_PGC_VPU_BASE (MX51_GPC_BASE + 0x240)
#define MXC_PGC_GPU_BASE (MX51_GPC_BASE + 0x260)
#define MXC_SRPG_NEON_BASE (MX51_GPC_BASE + 0x280)
#define MXC_SRPG_ARM_BASE (MX51_GPC_BASE + 0x2A0)
#define MXC_SRPG_EMPGC0_BASE (MX51_GPC_BASE + 0x2C0)
#define MXC_SRPG_EMPGC1_BASE (MX51_GPC_BASE + 0x2D0)
#define MXC_SRPG_MEGAMIX_BASE (MX51_GPC_BASE + 0x2E0)
#define MXC_SRPG_EMI_BASE (MX51_GPC_BASE + 0x300)
/* CORTEXA8 platform */
#define MXC_CORTEXA8_PLAT_PVID (MX51_CORTEXA8_BASE + 0x0)
#define MXC_CORTEXA8_PLAT_GPC (MX51_CORTEXA8_BASE + 0x4)
#define MXC_CORTEXA8_PLAT_PIC (MX51_CORTEXA8_BASE + 0x8)
#define MXC_CORTEXA8_PLAT_LPC (MX51_CORTEXA8_BASE + 0xC)
#define MXC_CORTEXA8_PLAT_NEON_LPC (MX51_CORTEXA8_BASE + 0x10)
#define MXC_CORTEXA8_PLAT_ICGC (MX51_CORTEXA8_BASE + 0x14)
#define MXC_CORTEXA8_PLAT_AMC (MX51_CORTEXA8_BASE + 0x18)
#define MXC_CORTEXA8_PLAT_NMC (MX51_CORTEXA8_BASE + 0x20)
#define MXC_CORTEXA8_PLAT_NMS (MX51_CORTEXA8_BASE + 0x24)
/* DVFS CORE */
#define MXC_DVFSTHRS (MXC_DVFS_CORE_BASE + 0x00)
#define MXC_DVFSCOUN (MXC_DVFS_CORE_BASE + 0x04)
#define MXC_DVFSSIG1 (MXC_DVFS_CORE_BASE + 0x08)
#define MXC_DVFSSIG0 (MXC_DVFS_CORE_BASE + 0x0C)
#define MXC_DVFSGPC0 (MXC_DVFS_CORE_BASE + 0x10)
#define MXC_DVFSGPC1 (MXC_DVFS_CORE_BASE + 0x14)
#define MXC_DVFSGPBT (MXC_DVFS_CORE_BASE + 0x18)
#define MXC_DVFSEMAC (MXC_DVFS_CORE_BASE + 0x1C)
#define MXC_DVFSCNTR (MXC_DVFS_CORE_BASE + 0x20)
#define MXC_DVFSLTR0_0 (MXC_DVFS_CORE_BASE + 0x24)
#define MXC_DVFSLTR0_1 (MXC_DVFS_CORE_BASE + 0x28)
#define MXC_DVFSLTR1_0 (MXC_DVFS_CORE_BASE + 0x2C)
#define MXC_DVFSLTR1_1 (MXC_DVFS_CORE_BASE + 0x30)
#define MXC_DVFSPT0 (MXC_DVFS_CORE_BASE + 0x34)
#define MXC_DVFSPT1 (MXC_DVFS_CORE_BASE + 0x38)
#define MXC_DVFSPT2 (MXC_DVFS_CORE_BASE + 0x3C)
#define MXC_DVFSPT3 (MXC_DVFS_CORE_BASE + 0x40)
/* GPC */
#define MXC_GPC_CNTR (MX51_GPC_BASE + 0x0)
#define MXC_GPC_PGR (MX51_GPC_BASE + 0x4)
#define MXC_GPC_VCR (MX51_GPC_BASE + 0x8)
#define MXC_GPC_ALL_PU (MX51_GPC_BASE + 0xC)
#define MXC_GPC_NEON (MX51_GPC_BASE + 0x10)
#define MXC_GPC_PGR_ARMPG_OFFSET 8
#define MXC_GPC_PGR_ARMPG_MASK (3 << 8)
/* PGC */
#define MXC_PGC_IPU_PGCR (MXC_PGC_IPU_BASE + 0x0)
#define MXC_PGC_IPU_PGSR (MXC_PGC_IPU_BASE + 0xC)
#define MXC_PGC_VPU_PGCR (MXC_PGC_VPU_BASE + 0x0)
#define MXC_PGC_VPU_PGSR (MXC_PGC_VPU_BASE + 0xC)
#define MXC_PGC_GPU_PGCR (MXC_PGC_GPU_BASE + 0x0)
#define MXC_PGC_GPU_PGSR (MXC_PGC_GPU_BASE + 0xC)
#define MXC_PGCR_PCR 1
#define MXC_SRPGCR_PCR 1
#define MXC_EMPGCR_PCR 1
#define MXC_PGSR_PSR 1
#define MXC_CORTEXA8_PLAT_LPC_DSM (1 << 0)
#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM (1 << 1)
/* SRPG */
#define MXC_SRPG_NEON_SRPGCR (MXC_SRPG_NEON_BASE + 0x0)
#define MXC_SRPG_NEON_PUPSCR (MXC_SRPG_NEON_BASE + 0x4)
#define MXC_SRPG_NEON_PDNSCR (MXC_SRPG_NEON_BASE + 0x8)
#define MXC_SRPG_ARM_SRPGCR (MXC_SRPG_ARM_BASE + 0x0)
#define MXC_SRPG_ARM_PUPSCR (MXC_SRPG_ARM_BASE + 0x4)
#define MXC_SRPG_ARM_PDNSCR (MXC_SRPG_ARM_BASE + 0x8)
#define MXC_SRPG_EMPGC0_SRPGCR (MXC_SRPG_EMPGC0_BASE + 0x0)
#define MXC_SRPG_EMPGC0_PUPSCR (MXC_SRPG_EMPGC0_BASE + 0x4)
#define MXC_SRPG_EMPGC0_PDNSCR (MXC_SRPG_EMPGC0_BASE + 0x8)
#define MXC_SRPG_EMPGC1_SRPGCR (MXC_SRPG_EMPGC1_BASE + 0x0)
#define MXC_SRPG_EMPGC1_PUPSCR (MXC_SRPG_EMPGC1_BASE + 0x4)
#define MXC_SRPG_EMPGC1_PDNSCR (MXC_SRPG_EMPGC1_BASE + 0x8)
#define MXC_SRPG_MEGAMIX_SRPGCR (MXC_SRPG_MEGAMIX_BASE + 0x0)
#define MXC_SRPG_MEGAMIX_PUPSCR (MXC_SRPG_MEGAMIX_BASE + 0x4)
#define MXC_SRPG_MEGAMIX_PDNSCR (MXC_SRPG_MEGAMIX_BASE + 0x8)
#define MXC_SRPGC_EMI_SRPGCR (MXC_SRPGC_EMI_BASE + 0x0)
#define MXC_SRPGC_EMI_PUPSCR (MXC_SRPGC_EMI_BASE + 0x4)
#define MXC_SRPGC_EMI_PDNSCR (MXC_SRPGC_EMI_BASE + 0x8)
#endif /* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
arch/arm/mach-mx5/devices.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/imx-uart.h>
static struct resource uart0[] = {
{
.start = MX51_UART1_BASE_ADDR,
.end = MX51_UART1_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MX51_MXC_INT_UART1,
.end = MX51_MXC_INT_UART1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_uart_device0 = {
.name = "imx-uart",
.id = 0,
.resource = uart0,
.num_resources = ARRAY_SIZE(uart0),
};
static struct resource uart1[] = {
{
.start = MX51_UART2_BASE_ADDR,
.end = MX51_UART2_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MX51_MXC_INT_UART2,
.end = MX51_MXC_INT_UART2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_uart_device1 = {
.name = "imx-uart",
.id = 1,
.resource = uart1,
.num_resources = ARRAY_SIZE(uart1),
};
static struct resource uart2[] = {
{
.start = MX51_UART3_BASE_ADDR,
.end = MX51_UART3_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MX51_MXC_INT_UART3,
.end = MX51_MXC_INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_uart_device2 = {
.name = "imx-uart",
.id = 2,
.resource = uart2,
.num_resources = ARRAY_SIZE(uart2),
};
static struct resource mxc_fec_resources[] = {
{
.start = MX51_MXC_FEC_BASE_ADDR,
.end = MX51_MXC_FEC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MX51_MXC_INT_FEC,
.end = MX51_MXC_INT_FEC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_fec_device = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_fec_resources),
.resource = mxc_fec_resources,
};
/* Dummy definition to allow compiling in AVIC and TZIC simultaneously */
int __init mxc_register_gpios(void)
{
return 0;
}
arch/arm/mach-mx5/devices.h 0 → 100644
View file @ 9b1489e9
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
extern struct platform_device mxc_uart_device2;
extern struct platform_device mxc_fec_device;
arch/arm/mach-mx5/mm.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*
* Create static mapping between physical to virtual memory.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/iomux-v3.h>
/*
* Define the MX51 memory map.
*/
static struct map_desc mxc_io_desc[] __initdata = {
{
.virtual = MX51_IRAM_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_IRAM_BASE_ADDR),
.length = MX51_IRAM_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_DEBUG_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_DEBUG_BASE_ADDR),
.length = MX51_DEBUG_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_TZIC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR),
.length = MX51_TZIC_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_AIPS1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR),
.length = MX51_AIPS1_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_SPBA0_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_SPBA0_BASE_ADDR),
.length = MX51_SPBA0_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_AIPS2_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR),
.length = MX51_AIPS2_SIZE,
.type = MT_DEVICE
}, {
.virtual = MX51_NFC_AXI_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR),
.length = MX51_NFC_AXI_SIZE,
.type = MT_DEVICE
},
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx51_map_io(void)
{
u32 tzic_addr;
if (mx51_revision() < MX51_CHIP_REV_2_0)
tzic_addr = 0x8FFFC000;
else
tzic_addr = 0xE0003000;
mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr);
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
void __init mx51_init_irq(void)
{
tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
}
arch/arm/plat-mxc/Kconfig
View file @ 9b1489e9
......@@ -23,6 +23,8 @@ config ARCH_MX2
config ARCH_MX25
bool "MX25-based"
select CPU_ARM926T
select ARCH_MXC_IOMUX_V3
select HAVE_FB_IMX
help
This enables support for systems based on the Freescale i.MX25 family
......@@ -38,6 +40,12 @@ config ARCH_MXC91231
help
This enables support for systems based on the Freescale MXC91231 family
config ARCH_MX5
bool "MX5-based"
select CPU_V7
help
This enables support for systems based on the Freescale i.MX51 family
endchoice
source "arch/arm/mach-mx1/Kconfig"
......@@ -45,6 +53,7 @@ source "arch/arm/mach-mx2/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
source "arch/arm/mach-mx25/Kconfig"
source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
endmenu
......@@ -58,6 +67,14 @@ config MXC_IRQ_PRIOR
requirements for timing.
Say N here, unless you have a specialized requirement.
config MXC_TZIC
bool "Enable TrustZone Interrupt Controller"
depends on ARCH_MX51
help
This will be automatically selected for all processors
containing this interrupt controller.
Say N here only if you are really sure.
config MXC_PWM
tristate "Enable PWM driver"
select HAVE_PWM
......
arch/arm/plat-mxc/Makefile
View file @ 9b1489e9
......@@ -5,6 +5,9 @@
# Common support
obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
# MX51 uses the TZIC interrupt controller, older platforms use AVIC (irq.o)
obj-$(CONFIG_MXC_TZIC) += tzic.o
obj-$(CONFIG_ARCH_MX1) += dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += dma-mx1-mx2.o
obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o
......
arch/arm/plat-mxc/ehci.c
View file @ 9b1489e9
......@@ -25,23 +25,35 @@
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX31_OTG_SIC_SHIFT 29
#define MX31_OTG_SIC_MASK (0xf << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT)
#define MX31_OTG_PM_BIT (1 << 24)
#define MX31_H2_SIC_SHIFT 21
#define MX31_H2_SIC_MASK (0xf << MX31_H2_SIC_SHIFT)
#define MX31_H2_SIC_MASK (0x3 << MX31_H2_SIC_SHIFT)
#define MX31_H2_PM_BIT (1 << 16)
#define MX31_H2_DT_BIT (1 << 5)
#define MX31_H1_SIC_SHIFT 13
#define MX31_H1_SIC_MASK (0xf << MX31_H1_SIC_SHIFT)
#define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT)
#define MX31_H1_PM_BIT (1 << 8)
#define MX31_H1_DT_BIT (1 << 4)
#define MX35_OTG_SIC_SHIFT 29
#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT)
#define MX35_OTG_PM_BIT (1 << 24)
#define MX35_H1_SIC_SHIFT 21
#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT)
#define MX35_H1_PM_BIT (1 << 8)
#define MX35_H1_IPPUE_UP_BIT (1 << 7)
#define MX35_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX35_H1_TLL_BIT (1 << 5)
#define MX35_H1_USBTE_BIT (1 << 4)
int mxc_set_usbcontrol(int port, unsigned int flags)
{
unsigned int v;
#ifdef CONFIG_ARCH_MX3
if (cpu_is_mx31()) {
v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
......@@ -51,15 +63,15 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
if (flags & MXC_EHCI_POWER_PINS_ENABLED)
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
......@@ -67,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
......@@ -77,6 +89,8 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
......@@ -84,6 +98,94 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
return 0;
}
if (cpu_is_mx35()) {
v = readl(MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX35_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX35_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX35_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX35_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX35_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX35_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX35_IO_ADDRESS(MX35_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_ARCH_MX3 */
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27()) {
/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
* are identical
*/
v = readl(MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_OTG_PM_BIT;
break;
case 1: /* H1 port */
v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H1_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H1_DT_BIT;
break;
case 2: /* H2 port */
v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK)
<< MX31_H2_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX31_H2_PM_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX31_H2_DT_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX27_IO_ADDRESS(MX27_OTG_BASE_ADDR +
USBCTRL_OTGBASE_OFFSET));
return 0;
}
#endif /* CONFIG_MACH_MX27 */
printk(KERN_WARNING
"%s() unable to setup USBCONTROL for this CPU\n", __func__);
return -EINVAL;
......
arch/arm/plat-mxc/include/mach/board-mx31moboard.h
View file @ 9b1489e9
......@@ -25,6 +25,7 @@ enum mx31moboard_boards {
MX31NOBOARD = 0,
MX31DEVBOARD = 1,
MX31MARXBOT = 2,
MX31SMARTBOT = 3,
};
/*
......@@ -34,6 +35,7 @@ enum mx31moboard_boards {
extern void mx31moboard_devboard_init(void);
extern void mx31moboard_marxbot_init(void);
extern void mx31moboard_smartbot_init(void);
#endif
......
arch/arm/plat-mxc/include/mach/common.h
View file @ 9b1489e9
......@@ -20,14 +20,17 @@ extern void mx25_map_io(void);
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
extern void mx51_map_io(void);
extern void mxc91231_map_io(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
extern void mx21_init_irq(void);
extern void mx25_init_irq(void);
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
extern void mx51_init_irq(void);
extern void mxc91231_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
......@@ -36,6 +39,8 @@ extern int mx25_clocks_init(void);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
......
arch/arm/plat-mxc/include/mach/debug-macro.S
View file @ 9b1489e9
......@@ -45,6 +45,15 @@
#define UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#endif
#ifdef CONFIG_ARCH_MX5
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#include <mach/mx51.h>
#define UART_PADDR MX51_UART1_BASE_ADDR
#define UART_VADDR MX51_AIPS1_IO_ADDRESS(MX51_UART1_BASE_ADDR)
#endif
#ifdef CONFIG_ARCH_MXC91231
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
......
arch/arm/plat-mxc/include/mach/entry-macro.S
View file @ 9b1489e9
/*
* Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
......@@ -18,11 +18,16 @@
.endm
.macro get_irqnr_preamble, base, tmp
#ifndef CONFIG_MXC_TZIC
ldr \base, =avic_base
ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
#elif defined CONFIG_MXC_TZIC
ldr \base, =tzic_base
ldr \base, [\base]
#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
......@@ -32,6 +37,7 @@
@ and returns its number in irqnr
@ and returns if an interrupt occured in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#ifndef CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
......@@ -44,6 +50,32 @@
bicne \tmp, \irqstat, #0xFFFFFFE0
strne \tmp, [\base, #AVIC_NIMASK]
streq r4, [\base, #AVIC_NIMASK]
#endif
#elif defined CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending.
@ 0xD80 is HIPND0 register
mov \irqnr, #0
mov \irqstat, #0x0D80
1000:
ldr \tmp, [\irqstat, \base]
cmp \tmp, #0
bne 1001f
addeq \irqnr, \irqnr, #32
addeq \irqstat, \irqstat, #4
cmp \irqnr, #128
blo 1000b
b 2001f
1001: mov \irqstat, #1
1002: tst \tmp, \irqstat
bne 2002f
movs \tmp, \tmp, lsr #1
addne \irqnr, \irqnr, #1
bne 1002b
2001:
mov \irqnr, #0
2002:
movs \irqnr, \irqnr
#endif
.endm
......
arch/arm/plat-mxc/include/mach/hardware.h
View file @ 9b1489e9
......@@ -27,6 +27,10 @@
(((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
(addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
#ifdef CONFIG_ARCH_MX5
#include <mach/mx51.h>
#endif
#ifdef CONFIG_ARCH_MX3
#include <mach/mx3x.h>
#include <mach/mx31.h>
......
arch/arm/plat-mxc/include/mach/iomux-mx25.h
View file @ 9b1489e9
......@@ -449,9 +449,11 @@
#define MX25_PAD_GPIO_C__CAN2_TX IOMUX_PAD(0x3f8, 0x1fc, 0x16, 0, 0, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_D__GPIO_D IOMUX_PAD(0x3fc, 0x200, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_E__LD16 IOMUX_PAD(0x400, 0x204, 0x02, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_D__CAN2_RX IOMUX_PAD(0x3fc, 0x200, 0x16, 0x484, 1, PAD_CTL_PUS_22K_UP)
#define MX25_PAD_GPIO_E__GPIO_E IOMUX_PAD(0x400, 0x204, 0x10, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__LD17 IOMUX_PAD(0x404, 0x208, 0x02, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_E__AUD7_TXD IOMUX_PAD(0x400, 0x204, 0x14, 0, 0, NO_PAD_CTRL)
#define MX25_PAD_GPIO_F__GPIO_F IOMUX_PAD(0x404, 0x208, 0x10, 0, 0, NO_PAD_CTRL)
......
arch/arm/plat-mxc/include/mach/iomux-mx51.h 0 → 100644
View file @ 9b1489e9
/*
* Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#ifndef __MACH_IOMUX_MX51_H__
#define __MACH_IOMUX_MX51_H__
#include <mach/iomux-v3.h>
/*
* various IOMUX alternate output functions (1-7)
*/
typedef enum iomux_config {
IOMUX_CONFIG_ALT0,
IOMUX_CONFIG_ALT1,
IOMUX_CONFIG_ALT2,
IOMUX_CONFIG_ALT3,
IOMUX_CONFIG_ALT4,
IOMUX_CONFIG_ALT5,
IOMUX_CONFIG_ALT6,
IOMUX_CONFIG_ALT7,
IOMUX_CONFIG_GPIO, /* added to help user use GPIO mode */
IOMUX_CONFIG_SION = 0x1 << 4, /* LOOPBACK:MUX SION bit */
} iomux_pin_cfg_t;
/* Pad control groupings */
#define MX51_UART1_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_DSE_HIGH)
#define MX51_UART2_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
#define MX51_UART3_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
/*
* The naming convention for the pad modes is MX51_PAD_<padname>__<padmode>
* If <padname> or <padmode> refers to a GPIO, it is named
* GPIO_<unit>_<num> see also iomux-v3.h
*/
/*
* FIXME: This was converted using scripts from existing Freescale code to
* this form used upstream. Need to verify the name format.
*/
/* PAD MUX ALT INPSE PATH PADCTRL */
#define MX51_PAD_GPIO_2_0__EIM_D16 IOMUX_PAD(0x3f0, 0x05c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_1__EIM_D17 IOMUX_PAD(0x3f4, 0x060, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_2__EIM_D18 IOMUX_PAD(0x3f8, 0x064, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_3__EIM_D19 IOMUX_PAD(0x3fc, 0x068, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_4__EIM_D20 IOMUX_PAD(0x400, 0x06c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_5__EIM_D21 IOMUX_PAD(0x404, 0x070, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_6__EIM_D22 IOMUX_PAD(0x408, 0x074, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_7__EIM_D23 IOMUX_PAD(0x40c, 0x078, 1, 0x0, 0, NO_PAD_CTRL)
/* Babbage UART3 */
#define MX51_PAD_EIM_D24__UART3_CTS IOMUX_PAD(0x410, 0x07c, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
#define MX51_PAD_EIM_D25__UART3_RXD IOMUX_PAD(0x414, 0x080, IOMUX_CONFIG_ALT3, 0x9f4, 0, MX51_UART3_PAD_CTRL)
#define MX51_PAD_EIM_D26__UART3_TXD IOMUX_PAD(0x418, 0x084, IOMUX_CONFIG_ALT3, 0x0, 0, MX51_UART3_PAD_CTRL)
#define MX51_PAD_EIM_D27__UART3_RTS IOMUX_PAD(0x41c, 0x088, IOMUX_CONFIG_ALT3, 0x9f0, 0, MX51_UART3_PAD_CTRL)
#define MX51_PAD_EIM_D28__EIM_D28 IOMUX_PAD(0x420, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D29__EIM_D29 IOMUX_PAD(0x424, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D30__EIM_D30 IOMUX_PAD(0x428, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_D31__EIM_D31 IOMUX_PAD(0x42c, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_10__EIM_A16 IOMUX_PAD(0x430, 0x09c, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_11__EIM_A17 IOMUX_PAD(0x434, 0x0a0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_12__EIM_A18 IOMUX_PAD(0x438, 0x0a4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_13__EIM_A19 IOMUX_PAD(0x43c, 0x0a8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_14__EIM_A20 IOMUX_PAD(0x440, 0x0ac, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_15__EIM_A21 IOMUX_PAD(0x444, 0x0b0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_16__EIM_A22 IOMUX_PAD(0x448, 0x0b4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_17__EIM_A23 IOMUX_PAD(0x44c, 0x0b8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_18__EIM_A24 IOMUX_PAD(0x450, 0x0bc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_19__EIM_A25 IOMUX_PAD(0x454, 0x0c0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_20__EIM_A26 IOMUX_PAD(0x458, 0x0c4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_21__EIM_A27 IOMUX_PAD(0x45c, 0x0c8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_EB0__EIM_EB0 IOMUX_PAD(0x460, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_EB1__EIM_EB1 IOMUX_PAD(0x464, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_22__EIM_EB2 IOMUX_PAD(0x468, 0x0d4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_23__EIM_EB3 IOMUX_PAD(0x46c, 0x0d8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_24__EIM_OE IOMUX_PAD(0x470, 0x0dc, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_25__EIM_CS0 IOMUX_PAD(0x474, 0x0e0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_26__EIM_CS1 IOMUX_PAD(0x478, 0x0e4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_27__EIM_CS2 IOMUX_PAD(0x47c, 0x0e8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_28__EIM_CS3 IOMUX_PAD(0x480, 0x0ec, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_29__EIM_CS4 IOMUX_PAD(0x484, 0x0f0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_30__EIM_CS5 IOMUX_PAD(0x488, 0x0f4, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_2_31__EIM_DTACK IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_1__EIM_LBA IOMUX_PAD(0x494, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_2__EIM_CRE IOMUX_PAD(0x4A0, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DRAM_CS1__DRAM_CS1 IOMUX_PAD(0x4D0, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_3__NANDF_WE_B IOMUX_PAD(0x4E4, 0x108, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_4__NANDF_RE_B IOMUX_PAD(0x4E8, 0x10C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_5__NANDF_ALE IOMUX_PAD(0x4EC, 0x110, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_6__NANDF_CLE IOMUX_PAD(0x4F0, 0x114, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_7__NANDF_WP_B IOMUX_PAD(0x4F4, 0x118, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_8__NANDF_RB0 IOMUX_PAD(0x4F8, 0x11C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_9__NANDF_RB1 IOMUX_PAD(0x4FC, 0x120, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_10__NANDF_RB2 IOMUX_PAD(0x500, 0x124, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_11__NANDF_RB3 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_12__GPIO_NAND IOMUX_PAD(0x514, 0x12C, 3, 0x0, 0, NO_PAD_CTRL)
/* REVISIT: Not sure of these values
#define MX51_PAD_GPIO_1___NANDF_RB4 IOMUX_PAD(, , , 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_13__NANDF_RB5 IOMUX_PAD(0x5D8, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_15__NANDF_RB7 IOMUX_PAD(0x5E0, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
*/
#define MX51_PAD_GPIO_3_14__NANDF_RB6 IOMUX_PAD(0x5DC, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_16__NANDF_CS0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_17__NANDF_CS1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_18__NANDF_CS2 IOMUX_PAD(0x520, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_19__NANDF_CS3 IOMUX_PAD(0x524, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_20__NANDF_CS4 IOMUX_PAD(0x528, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_21__NANDF_CS5 IOMUX_PAD(0x52C, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_22__NANDF_CS6 IOMUX_PAD(0x530, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_23__NANDF_CS7 IOMUX_PAD(0x534, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_24__NANDF_RDY_INT IOMUX_PAD(0x538, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_25__NANDF_D15 IOMUX_PAD(0x53C, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_26__NANDF_D14 IOMUX_PAD(0x540, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_27__NANDF_D13 IOMUX_PAD(0x544, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_28__NANDF_D12 IOMUX_PAD(0x548, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_29__NANDF_D11 IOMUX_PAD(0x54C, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_30__NANDF_D10 IOMUX_PAD(0x550, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_31__NANDF_D9 IOMUX_PAD(0x554, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_0__NANDF_D8 IOMUX_PAD(0x558, 0x170, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_1__NANDF_D7 IOMUX_PAD(0x55C, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_2__NANDF_D6 IOMUX_PAD(0x560, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_3__NANDF_D5 IOMUX_PAD(0x564, 0x17C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_4__NANDF_D4 IOMUX_PAD(0x568, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_5__NANDF_D3 IOMUX_PAD(0x56C, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_6__NANDF_D2 IOMUX_PAD(0x570, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_7__NANDF_D1 IOMUX_PAD(0x574, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_8__NANDF_D0 IOMUX_PAD(0x578, 0x190, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_12__CSI1_D8 IOMUX_PAD(0x57C, 0x194, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_13__CSI1_D9 IOMUX_PAD(0x580, 0x198, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D10__CSI1_D10 IOMUX_PAD(0x584, 0x19C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D11__CSI1_D11 IOMUX_PAD(0x588, 0x1A0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D12__CSI1_D12 IOMUX_PAD(0x58C, 0x1A4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D13__CSI1_D13 IOMUX_PAD(0x590, 0x1A8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D14__CSI1_D14 IOMUX_PAD(0x594, 0x1AC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D15__CSI1_D15 IOMUX_PAD(0x598, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D16__CSI1_D16 IOMUX_PAD(0x59C, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D17__CSI1_D17 IOMUX_PAD(0x5A0, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D18__CSI1_D18 IOMUX_PAD(0x5A4, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_D19__CSI1_D19 IOMUX_PAD(0x5A8, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_VSYNC__CSI1_VSYNC IOMUX_PAD(0x5AC, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_HSYNC__CSI1_HSYNC IOMUX_PAD(0x5B0, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_PIXCLK__CSI1_PIXCLK IOMUX_PAD(0x5B4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_MCLK__CSI1_MCLK IOMUX_PAD(0x5B8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI1_PKE0__CSI1_PKE0 IOMUX_PAD(0x860, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_9__CSI2_D12 IOMUX_PAD(0x5BC, 0x1CC, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_10__CSI2_D13 IOMUX_PAD(0x5C0, 0x1D0, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_11__CSI2_D14 IOMUX_PAD(0x5C4, 0x1D4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_12__CSI2_D15 IOMUX_PAD(0x5C8, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_11__CSI2_D16 IOMUX_PAD(0x5CC, 0x1DC, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_12__CSI2_D17 IOMUX_PAD(0x5D0, 0x1E0, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_11__CSI2_D18 IOMUX_PAD(0x5D4, 0x1E4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_12__CSI2_D19 IOMUX_PAD(0x5D8, 0x1E8, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_13__CSI2_VSYNC IOMUX_PAD(0x5DC, 0x1EC, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_14__CSI2_HSYNC IOMUX_PAD(0x5E0, 0x1F0, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_15__CSI2_PIXCLK IOMUX_PAD(0x5E4, 0x1F4, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_CSI2_PKE0__CSI2_PKE0 IOMUX_PAD(0x81C, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_16__I2C1_CLK IOMUX_PAD(0x5E8, 0x1F8, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_17__I2C1_DAT IOMUX_PAD(0x5EC, 0x1FC, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_18__AUD3_BB_TXD IOMUX_PAD(0x5F0, 0x200, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_19__AUD3_BB_RXD IOMUX_PAD(0x5F4, 0x204, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_20__AUD3_BB_CK IOMUX_PAD(0x5F8, 0x208, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_21__AUD3_BB_FS IOMUX_PAD(0x5FC, 0x20C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_22__CSPI1_MOSI IOMUX_PAD(0x600, 0x210, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_23__CSPI1_MISO IOMUX_PAD(0x604, 0x214, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_24__CSPI1_SS0 IOMUX_PAD(0x608, 0x218, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_25__CSPI1_SS1 IOMUX_PAD(0x60C, 0x21C, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_26__CSPI1_RDY IOMUX_PAD(0x610, 0x220, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_4_27__CSPI1_SCLK IOMUX_PAD(0x614, 0x224, 3, 0x0, 0, NO_PAD_CTRL)
/* Babbage UART1 */
#define MX51_PAD_UART1_RXD__UART1_RXD IOMUX_PAD(0x618, 0x228, IOMUX_CONFIG_ALT0, 0x9e4, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
#define MX51_PAD_UART1_TXD__UART1_TXD IOMUX_PAD(0x61C, 0x22C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL | PAD_CTL_SRE_FAST)
#define MX51_PAD_UART1_RTS__UART1_RTS IOMUX_PAD(0x620, 0x230, IOMUX_CONFIG_ALT0, 0x9e0, 0, MX51_UART1_PAD_CTRL)
#define MX51_PAD_UART1_CTS__UART1_CTS IOMUX_PAD(0x624, 0x234, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART1_PAD_CTRL)
/* Babbage UART2 */
#define MX51_PAD_UART2_RXD__UART2_RXD IOMUX_PAD(0x628, 0x238, IOMUX_CONFIG_ALT0, 0x9ec, 2, MX51_UART2_PAD_CTRL)
#define MX51_PAD_UART2_TXD__UART2_TXD IOMUX_PAD(0x62C, 0x23C, IOMUX_CONFIG_ALT0, 0x0, 0, MX51_UART2_PAD_CTRL)
#define MX51_PAD_GPIO_1_22__UART3_RXD IOMUX_PAD(0x630, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_23__UART3_TXD IOMUX_PAD(0x634, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_24__OWIRE_LINE IOMUX_PAD(0x638, 0x248, 3, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_ROW0__KEY_ROW0 IOMUX_PAD(0x63C, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_ROW1__KEY_ROW1 IOMUX_PAD(0x640, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_ROW2__KEY_ROW2 IOMUX_PAD(0x644, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_ROW3__KEY_ROW3 IOMUX_PAD(0x648, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL0__KEY_COL0 IOMUX_PAD(0x64C, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL1__KEY_COL1 IOMUX_PAD(0x650, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL2__KEY_COL2 IOMUX_PAD(0x654, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL3__KEY_COL3 IOMUX_PAD(0x658, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL4__KEY_COL4 IOMUX_PAD(0x65C, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_KEY_COL5__KEY_COL5 IOMUX_PAD(0x660, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_25__USBH1_CLK IOMUX_PAD(0x678, 0x278, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_26__USBH1_DIR IOMUX_PAD(0x67C, 0x27C, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_27__USBH1_STP IOMUX_PAD(0x680, 0x280, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_28__USBH1_NXT IOMUX_PAD(0x684, 0x284, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_11__USBH1_DATA0 IOMUX_PAD(0x688, 0x288, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_12__USBH1_DATA1 IOMUX_PAD(0x68C, 0x28C, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_13__USBH1_DATA2 IOMUX_PAD(0x690, 0x290, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_14__USBH1_DATA3 IOMUX_PAD(0x694, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_15__USBH1_DATA4 IOMUX_PAD(0x698, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_16__USBH1_DATA5 IOMUX_PAD(0x69C, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_17__USBH1_DATA6 IOMUX_PAD(0x6A0, 0x2A0, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_18__USBH1_DATA7 IOMUX_PAD(0x6A4, 0x2A4, 2, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_0__DI1_PIN11 IOMUX_PAD(0x6A8, 0x2A8, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_1__DI1_PIN12 IOMUX_PAD(0x6AC, 0x2AC, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_2__DI1_PIN13 IOMUX_PAD(0x6B0, 0x2B0, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_3__DI1_D0_CS IOMUX_PAD(0x6B4, 0x2B4, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_4__DI1_D1_CS IOMUX_PAD(0x6B8, 0x2B8, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_5__DISPB2_SER_DIN IOMUX_PAD(0x6BC, 0x2BC, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_6__DISPB2_SER_DIO IOMUX_PAD(0x6C0, 0x2C0, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_7__DISPB2_SER_CLK IOMUX_PAD(0x6C4, 0x2C4, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_3_8__DISPB2_SER_RS IOMUX_PAD(0x6C8, 0x2C8, 4, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT0__DISP1_DAT0 IOMUX_PAD(0x6CC, 0x2CC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT1__DISP1_DAT1 IOMUX_PAD(0x6D0, 0x2D0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT2__DISP1_DAT2 IOMUX_PAD(0x6D4, 0x2D4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT3__DISP1_DAT3 IOMUX_PAD(0x6D8, 0x2D8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT4__DISP1_DAT4 IOMUX_PAD(0x6DC, 0x2DC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT5__DISP1_DAT5 IOMUX_PAD(0x6E0, 0x2E0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT6__DISP1_DAT6 IOMUX_PAD(0x6E4, 0x2E4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT7__DISP1_DAT7 IOMUX_PAD(0x6E8, 0x2E8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT8__DISP1_DAT8 IOMUX_PAD(0x6EC, 0x2EC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT9__DISP1_DAT9 IOMUX_PAD(0x6F0, 0x2F0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT10__DISP1_DAT10 IOMUX_PAD(0x6F4, 0x2F4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT11__DISP1_DAT11 IOMUX_PAD(0x6F8, 0x2F8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT12__DISP1_DAT12 IOMUX_PAD(0x6FC, 0x2FC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT13__DISP1_DAT13 IOMUX_PAD(0x700, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT14__DISP1_DAT14 IOMUX_PAD(0x704, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT15__DISP1_DAT15 IOMUX_PAD(0x708, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT16__DISP1_DAT16 IOMUX_PAD(0x70C, 0x30C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT17__DISP1_DAT17 IOMUX_PAD(0x710, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT18__DISP1_DAT18 IOMUX_PAD(0x714, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT19__DISP1_DAT19 IOMUX_PAD(0x718, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT20__DISP1_DAT20 IOMUX_PAD(0x71C, 0x31C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT21__DISP1_DAT21 IOMUX_PAD(0x720, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT22__DISP1_DAT22 IOMUX_PAD(0x724, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP1_DAT23__DISP1_DAT23 IOMUX_PAD(0x728, 0x328, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI1_PIN3__DI1_PIN3 IOMUX_PAD(0x72C, 0x32C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI1_PIN2__DI1_PIN2 IOMUX_PAD(0x734, 0x330, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP1__DI_GP1 IOMUX_PAD(0x73C, 0x334, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP2__DI_GP2 IOMUX_PAD(0x740, 0x338, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP3__DI_GP3 IOMUX_PAD(0x744, 0x33C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI2_PIN4__DI2_PIN4 IOMUX_PAD(0x748, 0x340, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI2_PIN2__DI2_PIN2 IOMUX_PAD(0x74C, 0x344, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI2_PIN3__DI2_PIN3 IOMUX_PAD(0x750, 0x348, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK IOMUX_PAD(0x754, 0x34C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DI_GP4__DI_GP4 IOMUX_PAD(0x758, 0x350, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT0__DISP2_DAT0 IOMUX_PAD(0x75C, 0x354, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT1__DISP2_DAT1 IOMUX_PAD(0x760, 0x358, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT2__DISP2_DAT2 IOMUX_PAD(0x764, 0x35C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT3__DISP2_DAT3 IOMUX_PAD(0x768, 0x360, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT4__DISP2_DAT4 IOMUX_PAD(0x76C, 0x364, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT5__DISP2_DAT5 IOMUX_PAD(0x770, 0x368, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_19__DISP2_DAT6 IOMUX_PAD(0x774, 0x36C, 5, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_29__DISP2_DAT7 IOMUX_PAD(0x778, 0x370, 5, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_30__DISP2_DAT8 IOMUX_PAD(0x77C, 0x374, 5, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_31__DISP2_DAT9 IOMUX_PAD(0x780, 0x378, 5, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT10__DISP2_DAT10 IOMUX_PAD(0x784, 0x37C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT11__DISP2_DAT11 IOMUX_PAD(0x788, 0x380, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT12__DISP2_DAT12 IOMUX_PAD(0x78C, 0x384, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT13__DISP2_DAT13 IOMUX_PAD(0x790, 0x388, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT14__DISP2_DAT14 IOMUX_PAD(0x794, 0x38C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_DISP2_DAT15__DISP2_DAT15 IOMUX_PAD(0x798, 0x390, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_CMD__SD1_CMD IOMUX_PAD(0x79C, 0x394, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_CLK__SD1_CLK IOMUX_PAD(0x7A0, 0x398, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA0__SD1_DATA0 IOMUX_PAD(0x7A4, 0x39C, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA1__SD1_DATA1 IOMUX_PAD(0x7A8, 0x3A0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA2__SD1_DATA2 IOMUX_PAD(0x7AC, 0x3A4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD1_DATA3__SD1_DATA3 IOMUX_PAD(0x7B0, 0x3A8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_0__GPIO1_0 IOMUX_PAD(0x7B4, 0x3AC, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_1__GPIO1_1 IOMUX_PAD(0x7B8, 0x3B0, 1, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_CMD__SD2_CMD IOMUX_PAD(0x7BC, 0x3B4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_CLK__SD2_CLK IOMUX_PAD(0x7C0, 0x3B8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA0__SD2_DATA0 IOMUX_PAD(0x7C4, 0x3BC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA1__SD2_DATA1 IOMUX_PAD(0x7C8, 0x3C0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA2__SD2_DATA2 IOMUX_PAD(0x7CC, 0x3C4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_SD2_DATA3__SD2_DATA3 IOMUX_PAD(0x7D0, 0x3C8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_2__GPIO1_2 IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_3__GPIO1_3 IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_PMIC_INT_REQ__PMIC_INT_REQ IOMUX_PAD(0x7FC, 0x3D4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_4__GPIO1_4 IOMUX_PAD(0x804, 0x3D8, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_5__GPIO1_5 IOMUX_PAD(0x808, 0x3DC, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_6__GPIO1_6 IOMUX_PAD(0x80C, 0x3E0, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_7__GPIO1_7 IOMUX_PAD(0x810, 0x3E4, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_GPIO_1_8__GPIO1_8 IOMUX_PAD(0x814, 0x3E8, 0, 0x0, 1, \
(PAD_CTL_SRE_SLOW | PAD_CTL_DSE_MED | PAD_CTL_PUS_100K_UP | PAD_CTL_HYS))
#define MX51_PAD_GPIO_1_9__GPIO1_9 IOMUX_PAD(0x818, 0x3EC, 0, 0x0, 0, NO_PAD_CTRL)
/* EIM */
#define MX51_PAD_EIM_DA0__EIM_DA0 IOMUX_PAD(0x7a8, 0x01c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA1__EIM_DA1 IOMUX_PAD(0x7a8, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA2__EIM_DA2 IOMUX_PAD(0x7a8, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA3__EIM_DA3 IOMUX_PAD(0x7a8, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA4__EIM_DA4 IOMUX_PAD(0x7ac, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA5__EIM_DA5 IOMUX_PAD(0x7ac, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA6__EIM_DA6 IOMUX_PAD(0x7ac, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA7__EIM_DA7 IOMUX_PAD(0x7ac, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA8__EIM_DA8 IOMUX_PAD(0x7b0, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA9__EIM_DA9 IOMUX_PAD(0x7b0, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA10__EIM_DA10 IOMUX_PAD(0x7b0, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA11__EIM_DA11 IOMUX_PAD(0x7b0, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA12__EIM_DA12 IOMUX_PAD(0x7bc, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA13__EIM_DA13 IOMUX_PAD(0x7bc, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA14__EIM_DA14 IOMUX_PAD(0x7bc, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
#define MX51_PAD_EIM_DA15__EIM_DA15 IOMUX_PAD(0x7bc, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
#endif /* __MACH_IOMUX_MX51_H__ */
arch/arm/plat-mxc/include/mach/iomux-v3.h
View file @ 9b1489e9
......@@ -81,11 +81,13 @@ struct pad_desc {
#define PAD_CTL_ODE (1 << 3)
#define PAD_CTL_DSE_STANDARD (0 << 1)
#define PAD_CTL_DSE_HIGH (1 << 1)
#define PAD_CTL_DSE_MAX (2 << 1)
#define PAD_CTL_DSE_LOW (0 << 1)
#define PAD_CTL_DSE_MED (1 << 1)
#define PAD_CTL_DSE_HIGH (2 << 1)
#define PAD_CTL_DSE_MAX (3 << 1)
#define PAD_CTL_SRE_FAST (1 << 0)
#define PAD_CTL_SRE_SLOW (0 << 0)
/*
* setups a single pad in the iomuxer
......
arch/arm/plat-mxc/include/mach/irqs.h
View file @ 9b1489e9
......@@ -12,9 +12,13 @@
#define __ASM_ARCH_MXC_IRQS_H__
/*
* So far all i.MX SoCs have 64 internal interrupts
* SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64
*/
#ifdef CONFIG_MXC_TZIC
#define MXC_INTERNAL_IRQS 128
#else
#define MXC_INTERNAL_IRQS 64
#endif
#define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS
......@@ -25,6 +29,8 @@
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX25
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX5
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MXC91231
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX3
......@@ -52,6 +58,7 @@
#else
#define MX3_IPU_IRQS 0
#endif
/* REVISIT: Add IPU irqs on IMX51 */
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
......
arch/arm/plat-mxc/include/mach/memory.h
View file @ 9b1489e9
......@@ -16,6 +16,7 @@
#define MX25_PHYS_OFFSET UL(0x80000000)
#define MX27_PHYS_OFFSET UL(0xa0000000)
#define MX3x_PHYS_OFFSET UL(0x80000000)
#define MX51_PHYS_OFFSET UL(0x90000000)
#define MXC91231_PHYS_OFFSET UL(0x90000000)
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
......@@ -31,6 +32,8 @@
# define PHYS_OFFSET MX3x_PHYS_OFFSET
# elif defined CONFIG_ARCH_MXC91231
# define PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX5
# define PHYS_OFFSET MX51_PHYS_OFFSET
# endif
#endif
......
arch/arm/plat-mxc/include/mach/mx25.h
View file @ 9b1489e9
......@@ -33,10 +33,12 @@
#define MX25_FEC_BASE_ADDR 0x50038000
#define MX25_NFC_BASE_ADDR 0xbb000000
#define MX25_DRYICE_BASE_ADDR 0x53ffc000
#define MX25_LCDC_BASE_ADDR 0x53fbc000
#define MX25_INT_DRYICE 25
#define MX25_INT_FEC 57
#define MX25_INT_NANDFC 33
#define MX25_INT_LCDC 39
#if defined(IMX_NEEDS_DEPRECATED_SYMBOLS)
#define UART1_BASE_ADDR MX25_UART1_BASE_ADDR
......
arch/arm/plat-mxc/include/mach/mx51.h 0 → 100644
View file @ 9b1489e9
#ifndef __ASM_ARCH_MXC_MX51_H__
#define __ASM_ARCH_MXC_MX51_H__
/*
* MX51 memory map:
*
*
* Virt Phys Size What
* ---------------------------------------------------------------------------
* FA3E0000 1FFE0000 128K IRAM (SCCv2 RAM)
* 30000000 256M GPU
* 40000000 512M IPU
* FA200000 60000000 1M DEBUG
* FB100000 70000000 1M SPBA 0
* FB000000 73F00000 1M AIPS 1
* FB200000 83F00000 1M AIPS 2
* FA100000 8FFFC000 16K TZIC (interrupt controller)
* 90000000 256M CSD0 SDRAM/DDR
* A0000000 256M CSD1 SDRAM/DDR
* B0000000 128M CS0 Flash
* B8000000 128M CS1 Flash
* C0000000 128M CS2 Flash
* C8000000 64M CS3 Flash
* CC000000 32M CS4 SRAM
* CE000000 32M CS5 SRAM
* F9000000 CFFF0000 64K NFC (NAND Flash AXI)
*
*/
/*
* IRAM
*/
#define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */
#define MX51_IRAM_BASE_ADDR_VIRT 0xFA3E0000
#define MX51_IRAM_PARTITIONS 16
#define MX51_IRAM_PARTITIONS_TO1 12
#define MX51_IRAM_SIZE (MX51_IRAM_PARTITIONS * SZ_8K) /* 128KB */
/*
* NFC
*/
#define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */
#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000
#define MX51_NFC_AXI_SIZE SZ_64K
/*
* Graphics Memory of GPU
*/
#define MX51_GPU_BASE_ADDR 0x20000000
#define MX51_GPU2D_BASE_ADDR 0xD0000000
#define MX51_TZIC_BASE_ADDR 0x8FFFC000
#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000
#define MX51_TZIC_SIZE SZ_16K
#define MX51_DEBUG_BASE_ADDR 0x60000000
#define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000
#define MX51_DEBUG_SIZE SZ_1M
#define MX51_ETB_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00001000)
#define MX51_ETM_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00002000)
#define MX51_TPIU_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00003000)
#define MX51_CTI0_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00004000)
#define MX51_CTI1_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00005000)
#define MX51_CTI2_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00006000)
#define MX51_CTI3_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00007000)
#define MX51_CORTEX_DBG_BASE_ADDR (MX51_DEBUG_BASE_ADDR + 0x00008000)
/*
* SPBA global module enabled #0
*/
#define MX51_SPBA0_BASE_ADDR 0x70000000
#define MX51_SPBA0_BASE_ADDR_VIRT 0xFB100000
#define MX51_SPBA0_SIZE SZ_1M
#define MX51_MMC_SDHC1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00004000)
#define MX51_MMC_SDHC2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00008000)
#define MX51_UART3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0000C000)
#define MX51_CSPI1_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00010000)
#define MX51_SSI2_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00014000)
#define MX51_MMC_SDHC3_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00020000)
#define MX51_MMC_SDHC4_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00024000)
#define MX51_SPDIF_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00028000)
#define MX51_ATA_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00030000)
#define MX51_SLIM_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00034000)
#define MX51_HSI2C_DMA_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x00038000)
#define MX51_SPBA_CTRL_BASE_ADDR (MX51_SPBA0_BASE_ADDR + 0x0003C000)
/*
* defines for SPBA modules
*/
#define MX51_SPBA_SDHC1 0x04
#define MX51_SPBA_SDHC2 0x08
#define MX51_SPBA_UART3 0x0C
#define MX51_SPBA_CSPI1 0x10
#define MX51_SPBA_SSI2 0x14
#define MX51_SPBA_SDHC3 0x20
#define MX51_SPBA_SDHC4 0x24
#define MX51_SPBA_SPDIF 0x28
#define MX51_SPBA_ATA 0x30
#define MX51_SPBA_SLIM 0x34
#define MX51_SPBA_HSI2C 0x38
#define MX51_SPBA_CTRL 0x3C
/*
* AIPS 1
*/
#define MX51_AIPS1_BASE_ADDR 0x73F00000
#define MX51_AIPS1_BASE_ADDR_VIRT 0xFB000000
#define MX51_AIPS1_SIZE SZ_1M
#define MX51_OTG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00080000)
#define MX51_GPIO1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00084000)
#define MX51_GPIO2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00088000)
#define MX51_GPIO3_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0008C000)
#define MX51_GPIO4_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00090000)
#define MX51_KPP_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00094000)
#define MX51_WDOG_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x00098000)
#define MX51_WDOG2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x0009C000)
#define MX51_GPT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A0000)
#define MX51_SRTC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A4000)
#define MX51_IOMUXC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000A8000)
#define MX51_EPIT1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000AC000)
#define MX51_EPIT2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B0000)
#define MX51_PWM1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B4000)
#define MX51_PWM2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000B8000)
#define MX51_UART1_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000BC000)
#define MX51_UART2_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000C0000)
#define MX51_SRC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D0000)
#define MX51_CCM_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D4000)
#define MX51_GPC_BASE_ADDR (MX51_AIPS1_BASE_ADDR + 0x000D8000)
/*
* Defines for modules using static and dynamic DMA channels
*/
#define MX51_MXC_DMA_CHANNEL_IRAM 30
#define MX51_MXC_DMA_CHANNEL_SPDIF_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART1_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART1_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART2_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART2_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART3_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_UART3_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_MMC1 MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_MMC2 MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_SSI1_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_SSI1_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_SSI2_RX MXC_DMA_DYNAMIC_CHANNEL
#ifdef CONFIG_SDMA_IRAM
#define MX51_MXC_DMA_CHANNEL_SSI2_TX (MX51_MXC_DMA_CHANNEL_IRAM + 1)
#else /*CONFIG_SDMA_IRAM */
#define MX51_MXC_DMA_CHANNEL_SSI2_TX MXC_DMA_DYNAMIC_CHANNEL
#endif /*CONFIG_SDMA_IRAM */
#define MX51_MXC_DMA_CHANNEL_CSPI1_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI1_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI2_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI2_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI3_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_CSPI3_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_ATA_RX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_ATA_TX MXC_DMA_DYNAMIC_CHANNEL
#define MX51_MXC_DMA_CHANNEL_MEMORY MXC_DMA_DYNAMIC_CHANNEL
/*
* AIPS 2
*/
#define MX51_AIPS2_BASE_ADDR 0x83F00000
#define MX51_AIPS2_BASE_ADDR_VIRT 0xFB200000
#define MX51_AIPS2_SIZE SZ_1M
#define MX51_PLL1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00080000)
#define MX51_PLL2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00084000)
#define MX51_PLL3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00088000)
#define MX51_AHBMAX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00094000)
#define MX51_IIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x00098000)
#define MX51_CSU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x0009C000)
#define MX51_ARM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A0000)
#define MX51_OWIRE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A4000)
#define MX51_FIRI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000A8000)
#define MX51_CSPI2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000AC000)
#define MX51_SDMA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B0000)
#define MX51_SCC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B4000)
#define MX51_ROMCP_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000B8000)
#define MX51_RTIC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000BC000)
#define MX51_CSPI3_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C0000)
#define MX51_I2C2_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C4000)
#define MX51_I2C1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000C8000)
#define MX51_SSI1_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000CC000)
#define MX51_AUDMUX_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D0000)
#define MX51_M4IF_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D8000)
#define MX51_ESDCTL_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000D9000)
#define MX51_WEIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DA000)
#define MX51_NFC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DB000)
#define MX51_EMI_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DBF00)
#define MX51_MIPI_HSC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000DC000)
#define MX51_ATA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E0000)
#define MX51_SIM_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E4000)
#define MX51_SSI3BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000E8000)
#define MX51_MXC_FEC_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000EC000)
#define MX51_TVE_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F0000)
#define MX51_VPU_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F4000)
#define MX51_SAHARA_BASE_ADDR (MX51_AIPS2_BASE_ADDR + 0x000F8000)
/*
* Memory regions and CS
*/
#define MX51_GPU_CTRL_BASE_ADDR 0x30000000
#define MX51_IPU_CTRL_BASE_ADDR 0x40000000
#define MX51_CSD0_BASE_ADDR 0x90000000
#define MX51_CSD1_BASE_ADDR 0xA0000000
#define MX51_CS0_BASE_ADDR 0xB0000000
#define MX51_CS1_BASE_ADDR 0xB8000000
#define MX51_CS2_BASE_ADDR 0xC0000000
#define MX51_CS3_BASE_ADDR 0xC8000000
#define MX51_CS4_BASE_ADDR 0xCC000000
#define MX51_CS5_BASE_ADDR 0xCE000000
/* Does given address belongs to the specified memory region? */
#define ADDRESS_IN_REGION(addr, start, size) \
(((addr) >= (start)) && ((addr) < (start)+(size)))
/* Does given address belongs to the specified named `module'? */
#define MX51_IS_MODULE(addr, module) \
ADDRESS_IN_REGION(addr, MX51_ ## module ## _BASE_ADDR, \
MX51_ ## module ## _SIZE)
/*
* This macro defines the physical to virtual address mapping for all the
* peripheral modules. It is used by passing in the physical address as x
* and returning the virtual address. If the physical address is not mapped,
* it returns 0xDEADBEEF
*/
#define MX51_IO_ADDRESS(x) \
(void __iomem *) \
(MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \
MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \
0xDEADBEEF)
/*
* define the address mapping macros: in physical address order
*/
#define MX51_IRAM_IO_ADDRESS(x) \
(((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT)
#define MX51_TZIC_IO_ADDRESS(x) \
(((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT)
#define MX51_DEBUG_IO_ADDRESS(x) \
(((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT)
#define MX51_SPBA0_IO_ADDRESS(x) \
(((x) - MX51_SPBA0_BASE_ADDR) + MX51_SPBA0_BASE_ADDR_VIRT)
#define MX51_AIPS1_IO_ADDRESS(x) \
(((x) - MX51_AIPS1_BASE_ADDR) + MX51_AIPS1_BASE_ADDR_VIRT)
#define MX51_AIPS2_IO_ADDRESS(x) \
(((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT)
#define MX51_NFC_AXI_IO_ADDRESS(x) \
(((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT)
#define MX51_IS_MEM_DEVICE_NONSHARED(x) 0
/*
* DMA request assignments
*/
#define MX51_DMA_REQ_SSI3_TX1 47
#define MX51_DMA_REQ_SSI3_RX1 46
#define MX51_DMA_REQ_SPDIF 45
#define MX51_DMA_REQ_UART3_TX 44
#define MX51_DMA_REQ_UART3_RX 43
#define MX51_DMA_REQ_SLIM_B_TX 42
#define MX51_DMA_REQ_SDHC4 41
#define MX51_DMA_REQ_SDHC3 40
#define MX51_DMA_REQ_CSPI_TX 39
#define MX51_DMA_REQ_CSPI_RX 38
#define MX51_DMA_REQ_SSI3_TX2 37
#define MX51_DMA_REQ_IPU 36
#define MX51_DMA_REQ_SSI3_RX2 35
#define MX51_DMA_REQ_EPIT2 34
#define MX51_DMA_REQ_CTI2_1 33
#define MX51_DMA_REQ_EMI_WR 32
#define MX51_DMA_REQ_CTI2_0 31
#define MX51_DMA_REQ_EMI_RD 30
#define MX51_DMA_REQ_SSI1_TX1 29
#define MX51_DMA_REQ_SSI1_RX1 28
#define MX51_DMA_REQ_SSI1_TX2 27
#define MX51_DMA_REQ_SSI1_RX2 26
#define MX51_DMA_REQ_SSI2_TX1 25
#define MX51_DMA_REQ_SSI2_RX1 24
#define MX51_DMA_REQ_SSI2_TX2 23
#define MX51_DMA_REQ_SSI2_RX2 22
#define MX51_DMA_REQ_SDHC2 21
#define MX51_DMA_REQ_SDHC1 20
#define MX51_DMA_REQ_UART1_TX 19
#define MX51_DMA_REQ_UART1_RX 18
#define MX51_DMA_REQ_UART2_TX 17
#define MX51_DMA_REQ_UART2_RX 16
#define MX51_DMA_REQ_GPU 15
#define MX51_DMA_REQ_EXTREQ1 14
#define MX51_DMA_REQ_FIRI_TX 13
#define MX51_DMA_REQ_FIRI_RX 12
#define MX51_DMA_REQ_HS_I2C_RX 11
#define MX51_DMA_REQ_HS_I2C_TX 10
#define MX51_DMA_REQ_CSPI2_TX 9
#define MX51_DMA_REQ_CSPI2_RX 8
#define MX51_DMA_REQ_CSPI1_TX 7
#define MX51_DMA_REQ_CSPI1_RX 6
#define MX51_DMA_REQ_SLIM_B 5
#define MX51_DMA_REQ_ATA_TX_END 4
#define MX51_DMA_REQ_ATA_TX 3
#define MX51_DMA_REQ_ATA_RX 2
#define MX51_DMA_REQ_GPC 1
#define MX51_DMA_REQ_VPU 0
/*
* Interrupt numbers
*/
#define MX51_MXC_INT_BASE 0
#define MX51_MXC_INT_RESV0 0
#define MX51_MXC_INT_MMC_SDHC1 1
#define MX51_MXC_INT_MMC_SDHC2 2
#define MX51_MXC_INT_MMC_SDHC3 3
#define MX51_MXC_INT_MMC_SDHC4 4
#define MX51_MXC_INT_RESV5 5
#define MX51_MXC_INT_SDMA 6
#define MX51_MXC_INT_IOMUX 7
#define MX51_MXC_INT_NFC 8
#define MX51_MXC_INT_VPU 9
#define MX51_MXC_INT_IPU_ERR 10
#define MX51_MXC_INT_IPU_SYN 11
#define MX51_MXC_INT_GPU 12
#define MX51_MXC_INT_RESV13 13
#define MX51_MXC_INT_USB_H1 14
#define MX51_MXC_INT_EMI 15
#define MX51_MXC_INT_USB_H2 16
#define MX51_MXC_INT_USB_H3 17
#define MX51_MXC_INT_USB_OTG 18
#define MX51_MXC_INT_SAHARA_H0 19
#define MX51_MXC_INT_SAHARA_H1 20
#define MX51_MXC_INT_SCC_SMN 21
#define MX51_MXC_INT_SCC_STZ 22
#define MX51_MXC_INT_SCC_SCM 23
#define MX51_MXC_INT_SRTC_NTZ 24
#define MX51_MXC_INT_SRTC_TZ 25
#define MX51_MXC_INT_RTIC 26
#define MX51_MXC_INT_CSU 27
#define MX51_MXC_INT_SLIM_B 28
#define MX51_MXC_INT_SSI1 29
#define MX51_MXC_INT_SSI2 30
#define MX51_MXC_INT_UART1 31
#define MX51_MXC_INT_UART2 32
#define MX51_MXC_INT_UART3 33
#define MX51_MXC_INT_RESV34 34
#define MX51_MXC_INT_RESV35 35
#define MX51_MXC_INT_CSPI1 36
#define MX51_MXC_INT_CSPI2 37
#define MX51_MXC_INT_CSPI 38
#define MX51_MXC_INT_GPT 39
#define MX51_MXC_INT_EPIT1 40
#define MX51_MXC_INT_EPIT2 41
#define MX51_MXC_INT_GPIO1_INT7 42
#define MX51_MXC_INT_GPIO1_INT6 43
#define MX51_MXC_INT_GPIO1_INT5 44
#define MX51_MXC_INT_GPIO1_INT4 45
#define MX51_MXC_INT_GPIO1_INT3 46
#define MX51_MXC_INT_GPIO1_INT2 47
#define MX51_MXC_INT_GPIO1_INT1 48
#define MX51_MXC_INT_GPIO1_INT0 49
#define MX51_MXC_INT_GPIO1_LOW 50
#define MX51_MXC_INT_GPIO1_HIGH 51
#define MX51_MXC_INT_GPIO2_LOW 52
#define MX51_MXC_INT_GPIO2_HIGH 53
#define MX51_MXC_INT_GPIO3_LOW 54
#define MX51_MXC_INT_GPIO3_HIGH 55
#define MX51_MXC_INT_GPIO4_LOW 56
#define MX51_MXC_INT_GPIO4_HIGH 57
#define MX51_MXC_INT_WDOG1 58
#define MX51_MXC_INT_WDOG2 59
#define MX51_MXC_INT_KPP 60
#define MX51_MXC_INT_PWM1 61
#define MX51_MXC_INT_I2C1 62
#define MX51_MXC_INT_I2C2 63
#define MX51_MXC_INT_HS_I2C 64
#define MX51_MXC_INT_RESV65 65
#define MX51_MXC_INT_RESV66 66
#define MX51_MXC_INT_SIM_IPB 67
#define MX51_MXC_INT_SIM_DAT 68
#define MX51_MXC_INT_IIM 69
#define MX51_MXC_INT_ATA 70
#define MX51_MXC_INT_CCM1 71
#define MX51_MXC_INT_CCM2 72
#define MX51_MXC_INT_GPC1 73
#define MX51_MXC_INT_GPC2 74
#define MX51_MXC_INT_SRC 75
#define MX51_MXC_INT_NM 76
#define MX51_MXC_INT_PMU 77
#define MX51_MXC_INT_CTI_IRQ 78
#define MX51_MXC_INT_CTI1_TG0 79
#define MX51_MXC_INT_CTI1_TG1 80
#define MX51_MXC_INT_MCG_ERR 81
#define MX51_MXC_INT_MCG_TMR 82
#define MX51_MXC_INT_MCG_FUNC 83
#define MX51_MXC_INT_GPU2_IRQ 84
#define MX51_MXC_INT_GPU2_BUSY 85
#define MX51_MXC_INT_RESV86 86
#define MX51_MXC_INT_FEC 87
#define MX51_MXC_INT_OWIRE 88
#define MX51_MXC_INT_CTI1_TG2 89
#define MX51_MXC_INT_SJC 90
#define MX51_MXC_INT_SPDIF 91
#define MX51_MXC_INT_TVE 92
#define MX51_MXC_INT_FIRI 93
#define MX51_MXC_INT_PWM2 94
#define MX51_MXC_INT_SLIM_EXP 95
#define MX51_MXC_INT_SSI3 96
#define MX51_MXC_INT_EMI_BOOT 97
#define MX51_MXC_INT_CTI1_TG3 98
#define MX51_MXC_INT_SMC_RX 99
#define MX51_MXC_INT_VPU_IDLE 100
#define MX51_MXC_INT_EMI_NFC 101
#define MX51_MXC_INT_GPU_IDLE 102
/* silicon revisions specific to i.MX51 */
#define MX51_CHIP_REV_1_0 0x10
#define MX51_CHIP_REV_1_1 0x11
#define MX51_CHIP_REV_1_2 0x12
#define MX51_CHIP_REV_1_3 0x13
#define MX51_CHIP_REV_2_0 0x20
#define MX51_CHIP_REV_2_1 0x21
#define MX51_CHIP_REV_2_2 0x22
#define MX51_CHIP_REV_2_3 0x23
#define MX51_CHIP_REV_3_0 0x30
#define MX51_CHIP_REV_3_1 0x31
#define MX51_CHIP_REV_3_2 0x32
/* Mandatory defines used globally */
#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
extern unsigned int system_rev;
static inline unsigned int mx51_revision(void)
{
return system_rev;
}
#endif
#endif /* __ASM_ARCH_MXC_MX51_H__ */
arch/arm/plat-mxc/include/mach/mxc.h
View file @ 9b1489e9
......@@ -30,6 +30,7 @@
#define MXC_CPU_MX27 27
#define MXC_CPU_MX31 31
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MXC91231 91231
#ifndef __ASSEMBLY__
......@@ -108,6 +109,18 @@ extern unsigned int __mxc_cpu_type;
# define cpu_is_mx35() (0)
#endif
#ifdef CONFIG_ARCH_MX5
# ifdef mxc_cpu_type
# undef mxc_cpu_type
# define mxc_cpu_type __mxc_cpu_type
# else
# define mxc_cpu_type MXC_CPU_MX51
# endif
# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51)
#else
# define cpu_is_mx51() (0)
#endif
#ifdef CONFIG_ARCH_MXC91231
# ifdef mxc_cpu_type
# undef mxc_cpu_type
......
arch/arm/plat-mxc/include/mach/mxc_ehci.h
View file @ 9b1489e9
......@@ -22,6 +22,10 @@
#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5)
#define MXC_EHCI_TTL_ENABLED (1 << 6)
#define MXC_EHCI_INTERNAL_PHY (1 << 7)
#define MXC_EHCI_IPPUE_DOWN (1 << 8)
#define MXC_EHCI_IPPUE_UP (1 << 9)
struct mxc_usbh_platform_data {
int (*init)(struct platform_device *pdev);
int (*exit)(struct platform_device *pdev);
......
arch/arm/plat-mxc/include/mach/ssi.h 0 → 100644
View file @ 9b1489e9
#ifndef __MACH_SSI_H
#define __MACH_SSI_H
struct snd_ac97;
extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
struct imx_ssi_platform_data {
unsigned int flags;
#define IMX_SSI_DMA (1 << 0)
#define IMX_SSI_USE_AC97 (1 << 1)
void (*ac97_reset) (struct snd_ac97 *ac97);
void (*ac97_warm_reset)(struct snd_ac97 *ac97);
};
#endif /* __MACH_SSI_H */
arch/arm/plat-mxc/include/mach/timex.h
View file @ 9b1489e9
......@@ -28,6 +28,8 @@
#define CLOCK_TICK_RATE 16625000
#elif defined CONFIG_ARCH_MX25
#define CLOCK_TICK_RATE 16000000
#elif defined CONFIG_ARCH_MX5
#define CLOCK_TICK_RATE 8000000
#elif defined CONFIG_ARCH_MXC91231
#define CLOCK_TICK_RATE 13000000
#endif
......
arch/arm/plat-mxc/time.c
View file @ 9b1489e9
......@@ -30,9 +30,15 @@
#include <asm/mach/time.h>
#include <mach/common.h>
/*
* There are 2 versions of the timer hardware on Freescale MXC hardware.
* Version 1: MX1/MXL, MX21, MX27.
* Version 2: MX25, MX31, MX35, MX37, MX51
*/
/* defines common for all i.MX */
#define MXC_TCTL 0x00
#define MXC_TCTL_TEN (1 << 0)
#define MXC_TCTL_TEN (1 << 0) /* Enable module */
#define MXC_TPRER 0x04
/* MX1, MX21, MX27 */
......@@ -47,8 +53,8 @@
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
/* MX31, MX35, MX25, MXC91231 */
#define MX3_TCTL_WAITEN (1 << 3)
/* MX31, MX35, MX25, MXC91231, MX5 */
#define MX3_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define MX3_TCTL_CLK_IPG (1 << 6)
#define MX3_TCTL_FRR (1 << 9)
#define MX3_IR 0x0c
......@@ -57,6 +63,9 @@
#define MX3_TCN 0x24
#define MX3_TCMP 0x10
#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
#define timer_is_v2() (!timer_is_v1())
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
......@@ -66,7 +75,7 @@ static inline void gpt_irq_disable(void)
{
unsigned int tmp;
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
__raw_writel(0, timer_base + MX3_IR);
else {
tmp = __raw_readl(timer_base + MXC_TCTL);
......@@ -76,7 +85,7 @@ static inline void gpt_irq_disable(void)
static inline void gpt_irq_enable(void)
{
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
__raw_writel(1<<0, timer_base + MX3_IR);
else {
__raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
......@@ -86,11 +95,13 @@ static inline void gpt_irq_enable(void)
static void gpt_irq_acknowledge(void)
{
if (cpu_is_mx1())
__raw_writel(0, timer_base + MX1_2_TSTAT);
if (cpu_is_mx2())
__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v1()) {
if (cpu_is_mx1())
__raw_writel(0, timer_base + MX1_2_TSTAT);
else
__raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP,
timer_base + MX1_2_TSTAT);
} else if (timer_is_v2())
__raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
}
......@@ -117,7 +128,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
clocksource_mxc.read = mx3_get_cycles;
clocksource_mxc.mult = clocksource_hz2mult(c,
......@@ -180,7 +191,7 @@ static void mxc_set_mode(enum clock_event_mode mode,
if (mode != clockevent_mode) {
/* Set event time into far-far future */
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
__raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
timer_base + MX3_TCMP);
else
......@@ -233,7 +244,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
tstat = __raw_readl(timer_base + MX3_TSTAT);
else
tstat = __raw_readl(timer_base + MX1_2_TSTAT);
......@@ -264,7 +275,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
{
unsigned int c = clk_get_rate(timer_clk);
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
clockevent_mxc.set_next_event = mx3_set_next_event;
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
......@@ -296,7 +307,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
__raw_writel(0, timer_base + MXC_TCTL);
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (cpu_is_mx3() || cpu_is_mx25())
if (timer_is_v2())
tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
......
arch/arm/plat-mxc/tzic.c 0 → 100644
View file @ 9b1489e9
/*
* Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
/*
*****************************************
* TZIC Registers *
*****************************************
*/
#define TZIC_INTCNTL 0x0000 /* Control register */
#define TZIC_INTTYPE 0x0004 /* Controller Type register */
#define TZIC_IMPID 0x0008 /* Distributor Implementer Identification */
#define TZIC_PRIOMASK 0x000C /* Priority Mask Reg */
#define TZIC_SYNCCTRL 0x0010 /* Synchronizer Control register */
#define TZIC_DSMINT 0x0014 /* DSM interrupt Holdoffregister */
#define TZIC_INTSEC0(i) (0x0080 + ((i) << 2)) /* Interrupt Security Reg 0 */
#define TZIC_ENSET0(i) (0x0100 + ((i) << 2)) /* Enable Set Reg 0 */
#define TZIC_ENCLEAR0(i) (0x0180 + ((i) << 2)) /* Enable Clear Reg 0 */
#define TZIC_SRCSET0 0x0200 /* Source Set Register 0 */
#define TZIC_SRCCLAR0 0x0280 /* Source Clear Register 0 */
#define TZIC_PRIORITY0 0x0400 /* Priority Register 0 */
#define TZIC_PND0 0x0D00 /* Pending Register 0 */
#define TZIC_HIPND0 0x0D80 /* High Priority Pending Register */
#define TZIC_WAKEUP0(i) (0x0E00 + ((i) << 2)) /* Wakeup Config Register */
#define TZIC_SWINT 0x0F00 /* Software Interrupt Rigger Register */
#define TZIC_ID0 0x0FD0 /* Indentification Register 0 */
void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
/**
* tzic_mask_irq() - Disable interrupt number "irq" in the TZIC
*
* @param irq interrupt source number
*/
static void tzic_mask_irq(unsigned int irq)
{
int index, off;
index = irq >> 5;
off = irq & 0x1F;
__raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index));
}
/**
* tzic_unmask_irq() - Enable interrupt number "irq" in the TZIC
*
* @param irq interrupt source number
*/
static void tzic_unmask_irq(unsigned int irq)
{
int index, off;
index = irq >> 5;
off = irq & 0x1F;
__raw_writel(1 << off, tzic_base + TZIC_ENSET0(index));
}
static unsigned int wakeup_intr[4];
/**
* tzic_set_wake_irq() - Set interrupt number "irq" in the TZIC as a wake-up source.
*
* @param irq interrupt source number
* @param enable enable as wake-up if equal to non-zero
* disble as wake-up if equal to zero
*
* @return This function returns 0 on success.
*/
static int tzic_set_wake_irq(unsigned int irq, unsigned int enable)
{
unsigned int index, off;
index = irq >> 5;
off = irq & 0x1F;
if (index > 3)
return -EINVAL;
if (enable)
wakeup_intr[index] |= (1 << off);
else
wakeup_intr[index] &= ~(1 << off);
return 0;
}
static struct irq_chip mxc_tzic_chip = {
.name = "MXC_TZIC",
.ack = tzic_mask_irq,
.mask = tzic_mask_irq,
.unmask = tzic_unmask_irq,
.set_wake = tzic_set_wake_irq,
};
/*
* This function initializes the TZIC hardware and disables all the
* interrupts. It registers the interrupt enable and disable functions
* to the kernel for each interrupt source.
*/
void __init tzic_init_irq(void __iomem *irqbase)
{
int i;
tzic_base = irqbase;
/* put the TZIC into the reset value with
* all interrupts disabled
*/
i = __raw_readl(tzic_base + TZIC_INTCNTL);
__raw_writel(0x80010001, tzic_base + TZIC_INTCNTL);
__raw_writel(0x1f, tzic_base + TZIC_PRIOMASK);
__raw_writel(0x02, tzic_base + TZIC_SYNCCTRL);
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_INTSEC0(i));
/* disable all interrupts */
for (i = 0; i < 4; i++)
__raw_writel(0xFFFFFFFF, tzic_base + TZIC_ENCLEAR0(i));
/* all IRQ no FIQ Warning :: No selection */
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_tzic_chip);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID);
}
pr_info("TrustZone Interrupt Controller (TZIC) initialized\n");
}
/**
* tzic_enable_wake() - enable wakeup interrupt
*
* @param is_idle 1 if called in idle loop (ENSET0 register);
* 0 to be used when called from low power entry
* @return 0 if successful; non-zero otherwise
*/
int tzic_enable_wake(int is_idle)
{
unsigned int i, v;
__raw_writel(1, tzic_base + TZIC_DSMINT);
if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
return -EAGAIN;
for (i = 0; i < 4; i++) {
v = is_idle ? __raw_readl(TZIC_ENSET0(i)) : wakeup_intr[i];
__raw_writel(v, TZIC_WAKEUP0(i));
}
return 0;
}
drivers/serial/imx.c
View file @ 9b1489e9
......@@ -440,7 +440,7 @@ static irqreturn_t imx_rxint(int irq, void *dev_id)
temp = readl(sport->port.membase + USR2);
if (temp & USR2_BRCD) {
writel(temp | USR2_BRCD, sport->port.membase + USR2);
writel(USR2_BRCD, sport->port.membase + USR2);
if (uart_handle_break(&sport->port))
continue;
}
......
drivers/usb/gadget/fsl_mx3_udc.c
View file @ 9b1489e9
......@@ -17,6 +17,8 @@
#include <linux/fsl_devices.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
static struct clk *mxc_ahb_clk;
static struct clk *mxc_usb_clk;
......@@ -28,14 +30,16 @@ int fsl_udc_clk_init(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
if (IS_ERR(mxc_ahb_clk))
return PTR_ERR(mxc_ahb_clk);
if (!cpu_is_mx35()) {
mxc_ahb_clk = clk_get(&pdev->dev, "usb_ahb");
if (IS_ERR(mxc_ahb_clk))
return PTR_ERR(mxc_ahb_clk);
ret = clk_enable(mxc_ahb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
goto eenahb;
ret = clk_enable(mxc_ahb_clk);
if (ret < 0) {
dev_err(&pdev->dev, "clk_enable(\"usb_ahb\") failed\n");
goto eenahb;
}
}
/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
......@@ -50,6 +54,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
(freq < 59999000 || freq > 60001000)) {
dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
ret = -EINVAL;
goto eclkrate;
}
......@@ -66,9 +71,11 @@ int fsl_udc_clk_init(struct platform_device *pdev)
clk_put(mxc_usb_clk);
mxc_usb_clk = NULL;
egusb:
clk_disable(mxc_ahb_clk);
if (!cpu_is_mx35())
clk_disable(mxc_ahb_clk);
eenahb:
clk_put(mxc_ahb_clk);
if (!cpu_is_mx35())
clk_put(mxc_ahb_clk);
return ret;
}
......@@ -90,6 +97,8 @@ void fsl_udc_clk_release(void)
clk_disable(mxc_usb_clk);
clk_put(mxc_usb_clk);
}
clk_disable(mxc_ahb_clk);
clk_put(mxc_ahb_clk);
if (!cpu_is_mx35()) {
clk_disable(mxc_ahb_clk);
clk_put(mxc_ahb_clk);
}
}
drivers/video/Kconfig
View file @ 9b1489e9
......@@ -400,9 +400,12 @@ config FB_SA1100
If you plan to use the LCD display with your SA-1100 system, say
Y here.
config HAVE_FB_IMX
bool
config FB_IMX
tristate "Motorola i.MX LCD support"
depends on FB && (ARCH_MX1 || ARCH_MX2)
depends on FB && (HAVE_FB_IMX || ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7