Skip to content

L
linux
Commit 9b9556ec authored by Moritz Muehlenhoff's avatar Moritz Muehlenhoff Committed by Greg Kroah-Hartman
Browse files
Options

Staging: wlan-ng: Replace WLAN_LOG_WARNING() with printk() 

Signed-off-by: default avatarMoritz Muehlenhoff <jmm@debian.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent edbd606c
Hide whitespace changes
Inline Side-by-side
Showing with 29 additions and 31 deletions
drivers/staging/wlan-ng/hfa384x_usb.c
View file @ 9b9556ec
......@@ -427,7 +427,7 @@ submit_rx_urb(hfa384x_t *hw, gfp_t memflags)
/* Check whether we need to reset the RX pipe */
if (result == -EPIPE) {
WLAN_LOG_WARNING("%s rx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s rx pipe stalled: requesting reset\n",
hw->wlandev->netdev->name);
if ( !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags) )
schedule_work(&hw->usb_work);
......@@ -476,7 +476,7 @@ submit_tx_urb(hfa384x_t *hw, struct urb *tx_urb, gfp_t memflags)
/* Test whether we need to reset the TX pipe */
if (result == -EPIPE) {
WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s tx pipe stalled: requesting reset\n",
netdev->name);
set_bit(WORK_TX_HALT, &hw->usb_flags);
schedule_work(&hw->usb_work);
......@@ -809,7 +809,7 @@ static int usbctlx_rrid_completor_fn(usbctlx_completor_t *head)
/* Validate the length, note body len calculation in bytes */
if ( rridresult.riddata_len != complete->riddatalen ) {
WLAN_LOG_WARNING(
printk(KERN_WARNING
"RID len mismatch, rid=0x%04x hlen=%d fwlen=%d\n",
rridresult.rid,
complete->riddatalen,
......@@ -1499,7 +1499,7 @@ static int hfa384x_usbctlx_complete_sync(hfa384x_t *hw,
if (ctlx->state == CTLX_COMPLETE) {
result = completor->complete(completor);
} else {
WLAN_LOG_WARNING("CTLX[%d] error: state(%s)\n",
printk(KERN_WARNING "CTLX[%d] error: state(%s)\n",
hfa384x2host_16(ctlx->outbuf.type),
ctlxstr(ctlx->state));
result = -EIO;
......@@ -2255,7 +2255,7 @@ hfa384x_drvr_flashdl_write(
hw->bufinfo.page, hw->bufinfo.offset, dlbufaddr);
#if 0
WLAN_LOG_WARNING("dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr, hw->bufinfo.len, hw->dltimeout);
printk(KERN_WARNING "dlbuf@0x%06lx len=%d to=%d\n", dlbufaddr, hw->bufinfo.len, hw->dltimeout);
#endif
/* Calculations to determine how many fills of the dlbuffer to do
* and how many USB wmemreq's to do for each fill. At this point
......@@ -2764,7 +2764,7 @@ int hfa384x_drvr_readpda(hfa384x_t *hw, void *buf, unsigned int len)
len); /* units of bytes */
if (result) {
WLAN_LOG_WARNING(
printk(KERN_WARNING
"Read from index %zd failed, continuing\n",
i );
continue;
......@@ -2941,10 +2941,10 @@ int hfa384x_drvr_start(hfa384x_t *hw)
WLAN_LOG_DEBUG(0, "but second attempt succeeded. All should be ok\n");
}
} else if (result2 != 0) {
WLAN_LOG_WARNING(
printk(KERN_WARNING
"First cmd_initialize() succeeded, but second attempt failed (result=%d)\n",
result2);
WLAN_LOG_WARNING("Most likely the card will be functional\n");
printk(KERN_WARNING "Most likely the card will be functional\n");
goto done;
}
......@@ -3036,7 +3036,7 @@ int hfa384x_drvr_txframe(hfa384x_t *hw, struct sk_buff *skb, p80211_hdr_t *p8021
char *ptr;
if (hw->tx_urb.status == -EINPROGRESS) {
WLAN_LOG_WARNING("TX URB already in use\n");
printk(KERN_WARNING "TX URB already in use\n");
result = 3;
goto exit;
}
......@@ -3423,7 +3423,7 @@ hfa384x_usbctlxq_run(hfa384x_t *hw)
* this CTLX back in the "pending" queue
* and schedule a reset ...
*/
WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s tx pipe stalled: requesting reset\n",
hw->wlandev->netdev->name);
list_move(&head->list, &hw->ctlxq.pending);
set_bit(WORK_TX_HALT, &hw->usb_flags);
......@@ -3432,7 +3432,7 @@ hfa384x_usbctlxq_run(hfa384x_t *hw)
}
if (result == -ESHUTDOWN) {
WLAN_LOG_WARNING("%s urb shutdown!\n",
printk(KERN_WARNING "%s urb shutdown!\n",
hw->wlandev->netdev->name);
break;
}
......@@ -3508,7 +3508,7 @@ static void hfa384x_usbin_callback(struct urb *urb)
break;
case -EPIPE:
WLAN_LOG_WARNING("%s rx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s rx pipe stalled: requesting reset\n",
wlandev->netdev->name);
if ( !test_and_set_bit(WORK_RX_HALT, &hw->usb_flags) )
schedule_work(&hw->usb_work);
......@@ -3698,7 +3698,7 @@ static void hfa384x_usbin_ctlx(hfa384x_t *hw, hfa384x_usbin_t *usbin,
* Check that our message is what we're expecting ...
*/
if (ctlx->outbuf.type != intype) {
WLAN_LOG_WARNING("Expected IN[%d], received IN[%d] - ignored.\n",
printk(KERN_WARNING "Expected IN[%d], received IN[%d] - ignored.\n",
hfa384x2host_16(ctlx->outbuf.type),
hfa384x2host_16(intype));
goto unlock;
......@@ -3877,7 +3877,7 @@ static void hfa384x_usbin_rx(wlandevice_t *wlandev, struct sk_buff *skb)
break;
default:
WLAN_LOG_WARNING("Received frame on unsupported port=%d\n",
printk(KERN_WARNING "Received frame on unsupported port=%d\n",
HFA384x_RXSTATUS_MACPORT_GET(usbin->rxfrm.desc.status) );
goto done;
break;
......@@ -4057,7 +4057,7 @@ static void hfa384x_usbout_callback(struct urb *urb)
case -EPIPE:
{
hfa384x_t *hw = wlandev->priv;
WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s tx pipe stalled: requesting reset\n",
wlandev->netdev->name);
if ( !test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) )
schedule_work(&hw->usb_work);
......@@ -4193,7 +4193,7 @@ static void hfa384x_ctlxout_callback(struct urb *urb)
/* If the pipe has stalled then we need to reset it */
if ( (urb->status == -EPIPE) &&
!test_and_set_bit(WORK_TX_HALT, &hw->usb_flags) ) {
WLAN_LOG_WARNING("%s tx pipe stalled: requesting reset\n",
printk(KERN_WARNING "%s tx pipe stalled: requesting reset\n",
hw->wlandev->netdev->name);
schedule_work(&hw->usb_work);
}
......
drivers/staging/wlan-ng/p80211conv.c
View file @ 9b9556ec
......@@ -235,7 +235,7 @@ int skb_ether_to_p80211( wlandevice_t *wlandev, u32 ethconv, struct sk_buff *skb
skb->len,
(wlandev->hostwep & HOSTWEP_DEFAULTKEY_MASK),
p80211_wep->iv, p80211_wep->icv))) {
WLAN_LOG_WARNING("Host en-WEP failed, dropping frame (%d).\n", foo);
printk(KERN_WARNING "Host en-WEP failed, dropping frame (%d).\n", foo);
return 2;
}
fc |= cpu_to_le16(WLAN_SET_FC_ISWEP(1));
......
drivers/staging/wlan-ng/p80211netdev.c
View file @ 9b9556ec
......@@ -1155,7 +1155,7 @@ static void p80211knetdev_tx_timeout( netdevice_t *netdev)
if (wlandev->tx_timeout) {
wlandev->tx_timeout(wlandev);
} else {
WLAN_LOG_WARNING("Implement tx_timeout for %s\n",
printk(KERN_WARNING "Implement tx_timeout for %s\n",
wlandev->nsdname);
netif_wake_queue(wlandev->netdev);
}
......
drivers/staging/wlan-ng/prism2mgmt.c
View file @ 9b9556ec
......@@ -183,7 +183,7 @@ int prism2mgmt_scan(wlandevice_t *wlandev, void *msgp)
}
result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPASSIVESCANCTRL, word);
if ( result ) {
WLAN_LOG_WARNING("Passive scan not supported with "
printk(KERN_WARNING "Passive scan not supported with "
"current firmware. (<1.5.1)\n");
}
}
......
drivers/staging/wlan-ng/prism2mib.c
View file @ 9b9556ec
......@@ -729,7 +729,7 @@ void *data)
if (!isget)
if ((*uint32) % 2) {
WLAN_LOG_WARNING("Attempt to set odd number "
printk(KERN_WARNING "Attempt to set odd number "
"FragmentationThreshold\n");
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
return(0);
......
drivers/staging/wlan-ng/prism2sta.c
View file @ 9b9556ec
......@@ -446,7 +446,7 @@ static int prism2sta_mlmerequest(wlandevice_t *wlandev, p80211msg_t *msg)
break;
}
default:
WLAN_LOG_WARNING("Unknown mgmt request message 0x%08x", msg->msgcode);
printk(KERN_WARNING "Unknown mgmt request message 0x%08x", msg->msgcode);
break;
}
......@@ -511,7 +511,7 @@ u32 prism2sta_ifstate(wlandevice_t *wlandev, u32 ifstate)
result = P80211ENUM_resultcode_success;
break;
case WLAN_MSD_RUNNING:
WLAN_LOG_WARNING(
printk(KERN_WARNING
"Cannot enter fwload state from enable state,"
"you must disable first.\n");
result = P80211ENUM_resultcode_invalid_parameters;
......@@ -1467,7 +1467,7 @@ void prism2sta_processing_defer(struct work_struct *data)
default:
/* This is bad, IO port problems? */
WLAN_LOG_WARNING(
printk(KERN_WARNING
"unknown linkstatus=0x%02x\n", hw->link_status);
goto failed;
break;
......@@ -1557,14 +1557,14 @@ static void prism2sta_inf_assocstatus(wlandevice_t *wlandev,
if (i >= hw->authlist.cnt) {
if (rec.assocstatus != HFA384x_ASSOCSTATUS_AUTHFAIL)
WLAN_LOG_WARNING("assocstatus info frame received for non-authenticated station.\n");
printk(KERN_WARNING "assocstatus info frame received for non-authenticated station.\n");
} else {
hw->authlist.assoc[i] =
(rec.assocstatus == HFA384x_ASSOCSTATUS_STAASSOC ||
rec.assocstatus == HFA384x_ASSOCSTATUS_REASSOC);
if (rec.assocstatus == HFA384x_ASSOCSTATUS_AUTHFAIL)
WLAN_LOG_WARNING("authfail assocstatus info frame received for authenticated station.\n");
printk(KERN_WARNING "authfail assocstatus info frame received for authenticated station.\n");
}
return;
......@@ -1887,16 +1887,16 @@ void prism2sta_ev_info(wlandevice_t *wlandev, hfa384x_InfFrame_t *inf)
prism2sta_inf_psusercnt(wlandev, inf);
break;
case HFA384x_IT_KEYIDCHANGED:
WLAN_LOG_WARNING("Unhandled IT_KEYIDCHANGED\n");
printk(KERN_WARNING "Unhandled IT_KEYIDCHANGED\n");
break;
case HFA384x_IT_ASSOCREQ:
WLAN_LOG_WARNING("Unhandled IT_ASSOCREQ\n");
printk(KERN_WARNING "Unhandled IT_ASSOCREQ\n");
break;
case HFA384x_IT_MICFAILURE:
WLAN_LOG_WARNING("Unhandled IT_MICFAILURE\n");
printk(KERN_WARNING "Unhandled IT_MICFAILURE\n");
break;
default:
WLAN_LOG_WARNING(
printk(KERN_WARNING
"Unknown info type=0x%02x\n", inf->infotype);
break;
}
......
drivers/staging/wlan-ng/wlan_compat.h
View file @ 9b9556ec
......@@ -58,8 +58,6 @@
#include <linux/hardirq.h>
#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args);
#if defined(WLAN_INCLUDE_DEBUG)
#define WLAN_HEX_DUMP( l, x, p, n) if( WLAN_DBVAR >= (l) ){ \
int __i__; \
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7