Merge remote-tracking branch 'regmap/for-5.8' into regmap-next

drivers/base/regmap/regmap-i2c.c

@@ -246,6 +246,63 @@ static const struct regmap_bus regmap_i2c_smbus_i2c_block = {
 	.max_raw_write = I2C_SMBUS_BLOCK_MAX,
 };
 
+static int regmap_i2c_smbus_i2c_write_reg16(void *context, const void *data,
+				      size_t count)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+
+	if (count < 2)
+		return -EINVAL;
+
+	count--;
+	return i2c_smbus_write_i2c_block_data(i2c, ((u8 *)data)[0], count,
+					      (u8 *)data + 1);
+}
+
+static int regmap_i2c_smbus_i2c_read_reg16(void *context, const void *reg,
+				     size_t reg_size, void *val,
+				     size_t val_size)
+{
+	struct device *dev = context;
+	struct i2c_client *i2c = to_i2c_client(dev);
+	int ret, count, len = val_size;
+
+	if (reg_size != 2)
+		return -EINVAL;
+
+	ret = i2c_smbus_write_byte_data(i2c, ((u16 *)reg)[0] & 0xff,
+					((u16 *)reg)[0] >> 8);
+	if (ret < 0)
+		return ret;
+
+	count = 0;
+	do {
+		/* Current Address Read */
+		ret = i2c_smbus_read_byte(i2c);
+		if (ret < 0)
+			break;
+
+		*((u8 *)val++) = ret;
+		count++;
+		len--;
+	} while (len > 0);
+
+	if (count == val_size)
+		return 0;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static const struct regmap_bus regmap_i2c_smbus_i2c_block_reg16 = {
+	.write = regmap_i2c_smbus_i2c_write_reg16,
+	.read = regmap_i2c_smbus_i2c_read_reg16,
+	.max_raw_read = I2C_SMBUS_BLOCK_MAX,
+	.max_raw_write = I2C_SMBUS_BLOCK_MAX,
+};
+
 static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 					const struct regmap_config *config)
 {
@@ -255,6 +312,10 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_I2C_BLOCK))
 		return &regmap_i2c_smbus_i2c_block;
+	else if (config->val_bits == 8 && config->reg_bits == 16 &&
+		i2c_check_functionality(i2c->adapter,
+					I2C_FUNC_SMBUS_I2C_BLOCK))
+		return &regmap_i2c_smbus_i2c_block_reg16;
 	else if (config->val_bits == 16 && config->reg_bits == 8 &&
 		 i2c_check_functionality(i2c->adapter,
 					 I2C_FUNC_SMBUS_WORD_DATA))

drivers/base/regmap/regmap-irq.c

@@ -541,8 +541,9 @@ static const struct irq_domain_ops regmap_domain_ops = {
 };
 
 /**
- * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ * regmap_add_irq_chip_np() - Use standard regmap IRQ controller handling
  *
+ * @np: The device_node where the IRQ domain should be added to.
  * @map: The regmap for the device.
  * @irq: The IRQ the device uses to signal interrupts.
  * @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -556,9 +557,10 @@ static const struct irq_domain_ops regmap_domain_ops = {
  * register cache.  The chip driver is responsible for restoring the
  * register values used by the IRQ controller over suspend and resume.
  */
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
-			int irq_base, const struct regmap_irq_chip *chip,
-			struct regmap_irq_chip_data **data)
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+			   int irq_flags, int irq_base,
+			   const struct regmap_irq_chip *chip,
+			   struct regmap_irq_chip_data **data)
 {
 	struct regmap_irq_chip_data *d;
 	int i;
@@ -769,12 +771,10 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	}
 
 	if (irq_base)
-		d->domain = irq_domain_add_legacy(map->dev->of_node,
-						  chip->num_irqs, irq_base, 0,
-						  &regmap_domain_ops, d);
+		d->domain = irq_domain_add_legacy(np, chip->num_irqs, irq_base,
+						  0, &regmap_domain_ops, d);
 	else
-		d->domain = irq_domain_add_linear(map->dev->of_node,
-						  chip->num_irqs,
+		d->domain = irq_domain_add_linear(np, chip->num_irqs,
 						  &regmap_domain_ops, d);
 	if (!d->domain) {
 		dev_err(map->dev, "Failed to create IRQ domain\n");
@@ -808,6 +808,30 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 	kfree(d);
 	return ret;
 }
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip_np);
+
+/**
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ *
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * This is the same as regmap_add_irq_chip_np, except that the device
+ * node of the regmap is used.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+			int irq_base, const struct regmap_irq_chip *chip,
+			struct regmap_irq_chip_data **data)
+{
+	return regmap_add_irq_chip_np(map->dev->of_node, map, irq, irq_flags,
+				      irq_base, chip, data);
+}
 EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
 
 /**
@@ -875,9 +899,10 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
 }
 
 /**
- * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ * devm_regmap_add_irq_chip_np() - Resource manager regmap_add_irq_chip_np()
  *
  * @dev: The device pointer on which irq_chip belongs to.
+ * @np: The device_node where the IRQ domain should be added to.
  * @map: The regmap for the device.
  * @irq: The IRQ the device uses to signal interrupts
  * @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -890,10 +915,11 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
  * The &regmap_irq_chip_data will be automatically released when the device is
  * unbound.
  */
-int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
-			     int irq_flags, int irq_base,
-			     const struct regmap_irq_chip *chip,
-			     struct regmap_irq_chip_data **data)
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+				struct regmap *map, int irq, int irq_flags,
+				int irq_base,
+				const struct regmap_irq_chip *chip,
+				struct regmap_irq_chip_data **data)
 {
 	struct regmap_irq_chip_data **ptr, *d;
 	int ret;
@@ -903,8 +929,8 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 	if (!ptr)
 		return -ENOMEM;
 
-	ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base,
-				  chip, &d);
+	ret = regmap_add_irq_chip_np(np, map, irq, irq_flags, irq_base,
+				     chip, &d);
 	if (ret < 0) {
 		devres_free(ptr);
 		return ret;
@@ -915,6 +941,32 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 	*data = d;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_np);
+
+/**
+ * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The &regmap_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
+			     int irq_flags, int irq_base,
+			     const struct regmap_irq_chip *chip,
+			     struct regmap_irq_chip_data **data)
+{
+	return devm_regmap_add_irq_chip_np(dev, map->dev->of_node, map, irq,
+					   irq_flags, irq_base, chip, data);
+}
 EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
 
 /**

drivers/base/regmap/regmap.c

@@ -827,6 +827,7 @@ struct regmap *__regmap_init(struct device *dev,
 	} else if (!bus->read || !bus->write) {
 		map->reg_read = _regmap_bus_reg_read;
 		map->reg_write = _regmap_bus_reg_write;
+		map->reg_update_bits = bus->reg_update_bits;
 
 		map->defer_caching = false;
 		goto skip_format_initialization;
@@ -2936,6 +2937,28 @@ int regmap_update_bits_base(struct regmap *map, unsigned int reg,
 }
 EXPORT_SYMBOL_GPL(regmap_update_bits_base);
 
+/**
+ * regmap_test_bits() - Check if all specified bits are set in a register.
+ *
+ * @map: Register map to operate on
+ * @reg: Register to read from
+ * @bits: Bits to test
+ *
+ * Returns -1 if the underlying regmap_read() fails, 0 if at least one of the
+ * tested bits is not set and 1 if all tested bits are set.
+ */
+int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits)
+{
+	unsigned int val, ret;
+
+	ret = regmap_read(map, reg, &val);
+	if (ret)
+		return ret;
+
+	return (val & bits) == bits;
+}
+EXPORT_SYMBOL_GPL(regmap_test_bits);
+
 void regmap_async_complete_cb(struct regmap_async *async, int ret)
 {
 	struct regmap *map = async->map;

include/linux/regmap.h

@@ -17,10 +17,12 @@
 #include <linux/err.h>
 #include <linux/bug.h>
 #include <linux/lockdep.h>
+#include <linux/iopoll.h>
 
 struct module;
 struct clk;
 struct device;
+struct device_node;
 struct i2c_client;
 struct i3c_device;
 struct irq_domain;
@@ -71,6 +73,13 @@ struct reg_sequence {
 	unsigned int delay_us;
 };
 
+#define REG_SEQ(_reg, _def, _delay_us) {		\
+				.reg = _reg,		\
+				.def = _def,		\
+				.delay_us = _delay_us,	\
+				}
+#define REG_SEQ0(_reg, _def)	REG_SEQ(_reg, _def, 0)
+
 #define	regmap_update_bits(map, reg, mask, val) \
 	regmap_update_bits_base(map, reg, mask, val, NULL, false, false)
 #define	regmap_update_bits_async(map, reg, mask, val)\
@@ -122,26 +131,10 @@ struct reg_sequence {
  */
 #define regmap_read_poll_timeout(map, addr, val, cond, sleep_us, timeout_us) \
 ({ \
-	u64 __timeout_us = (timeout_us); \
-	unsigned long __sleep_us = (sleep_us); \
-	ktime_t __timeout = ktime_add_us(ktime_get(), __timeout_us); \
-	int __ret; \
-	might_sleep_if(__sleep_us); \
-	for (;;) { \
-		__ret = regmap_read((map), (addr), &(val)); \
-		if (__ret) \
-			break; \
-		if (cond) \
-			break; \
-		if ((__timeout_us) && \
-		    ktime_compare(ktime_get(), __timeout) > 0) { \
-			__ret = regmap_read((map), (addr), &(val)); \
-			break; \
-		} \
-		if (__sleep_us) \
-			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
-	} \
-	__ret ?: ((cond) ? 0 : -ETIMEDOUT); \
+	int __ret, __tmp; \
+	__tmp = read_poll_timeout(regmap_read, __ret, __ret || (cond), \
+			sleep_us, timeout_us, false, (map), (addr), &(val)); \
+	__ret ?: __tmp; \
 })
 
 /**
@@ -209,25 +202,10 @@ struct reg_sequence {
  */
 #define regmap_field_read_poll_timeout(field, val, cond, sleep_us, timeout_us) \
 ({ \
-	u64 __timeout_us = (timeout_us); \
-	unsigned long __sleep_us = (sleep_us); \
-	ktime_t timeout = ktime_add_us(ktime_get(), __timeout_us); \
-	int pollret; \
-	might_sleep_if(__sleep_us); \
-	for (;;) { \
-		pollret = regmap_field_read((field), &(val)); \
-		if (pollret) \
-			break; \
-		if (cond) \
-			break; \
-		if (__timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
-			pollret = regmap_field_read((field), &(val)); \
-			break; \
-		} \
-		if (__sleep_us) \
-			usleep_range((__sleep_us >> 2) + 1, __sleep_us); \
-	} \
-	pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
+	int __ret, __tmp; \
+	__tmp = read_poll_timeout(regmap_field_read, __ret, __ret || (cond), \
+			sleep_us, timeout_us, false, (field), &(val)); \
+	__ret ?: __tmp; \
 })
 
 #ifdef CONFIG_REGMAP
@@ -1111,6 +1089,21 @@ bool regmap_reg_in_ranges(unsigned int reg,
 			  const struct regmap_range *ranges,
 			  unsigned int nranges);
 
+static inline int regmap_set_bits(struct regmap *map,
+				  unsigned int reg, unsigned int bits)
+{
+	return regmap_update_bits_base(map, reg, bits, bits,
+				       NULL, false, false);
+}
+
+static inline int regmap_clear_bits(struct regmap *map,
+				    unsigned int reg, unsigned int bits)
+{
+	return regmap_update_bits_base(map, reg, bits, 0, NULL, false, false);
+}
+
+int regmap_test_bits(struct regmap *map, unsigned int reg, unsigned int bits);
+
 /**
  * struct reg_field - Description of an register field
  *
@@ -1134,6 +1127,14 @@ struct reg_field {
 				.msb = _msb,	\
 				}
 
+#define REG_FIELD_ID(_reg, _lsb, _msb, _size, _offset) {	\
+				.reg = _reg,			\
+				.lsb = _lsb,			\
+				.msb = _msb,			\
+				.id_size = _size,		\
+				.id_offset = _offset,		\
+				}
+
 struct regmap_field *regmap_field_alloc(struct regmap *regmap,
 		struct reg_field reg_field);
 void regmap_field_free(struct regmap_field *field);
@@ -1310,12 +1311,21 @@ struct regmap_irq_chip_data;
 int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
 			int irq_base, const struct regmap_irq_chip *chip,
 			struct regmap_irq_chip_data **data);
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+			   int irq_flags, int irq_base,
+			   const struct regmap_irq_chip *chip,
+			   struct regmap_irq_chip_data **data);
 void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
 
 int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
 			     int irq_flags, int irq_base,
 			     const struct regmap_irq_chip *chip,
 			     struct regmap_irq_chip_data **data);
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+				struct regmap *map, int irq, int irq_flags,
+				int irq_base,
+				const struct regmap_irq_chip *chip,
+				struct regmap_irq_chip_data **data);
 void devm_regmap_del_irq_chip(struct device *dev, int irq,
 			      struct regmap_irq_chip_data *data);
 
@@ -1410,6 +1420,27 @@ static inline int regmap_update_bits_base(struct regmap *map, unsigned int reg,
 	return -EINVAL;
 }
 
+static inline int regmap_set_bits(struct regmap *map,
+				  unsigned int reg, unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_clear_bits(struct regmap *map,
+				    unsigned int reg, unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
+static inline int regmap_test_bits(struct regmap *map,
+				   unsigned int reg, unsigned int bits)
+{
+	WARN_ONCE(1, "regmap API is disabled");
+	return -EINVAL;
+}
+
 static inline int regmap_field_update_bits_base(struct regmap_field *field,
 					unsigned int mask, unsigned int val,
 					bool *change, bool async, bool force)