Commit 9be5f3e9 authored by Paul Cercueil's avatar Paul Cercueil Committed by James Hogan

MIPS: ingenic: Initial JZ4770 support

Provide just enough bits (clocks, clocksource, uart) to allow a kernel
to boot on the JZ4770 SoC to a initramfs userspace.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Reviewed-by: default avatarPrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Reviewed-by: default avatarJames Hogan <jhogan@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maarten ter Huurne <maarten@treewalker.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/18487/Signed-off-by: default avatarJames Hogan <jhogan@kernel.org>
parent ce0d60f7
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/clock/jz4770-cgu.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ingenic,jz4770";
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
intc: interrupt-controller@10001000 {
compatible = "ingenic,jz4770-intc";
reg = <0x10001000 0x40>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpuintc>;
interrupts = <2>;
};
ext: ext {
compatible = "fixed-clock";
#clock-cells = <0>;
};
osc32k: osc32k {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
cgu: jz4770-cgu@10000000 {
compatible = "ingenic,jz4770-cgu";
reg = <0x10000000 0x100>;
clocks = <&ext>, <&osc32k>;
clock-names = "ext", "osc32k";
#clock-cells = <1>;
};
pinctrl: pin-controller@10010000 {
compatible = "ingenic,jz4770-pinctrl";
reg = <0x10010000 0x600>;
#address-cells = <1>;
#size-cells = <0>;
gpa: gpio@0 {
compatible = "ingenic,jz4770-gpio";
reg = <0>;
gpio-controller;
gpio-ranges = <&pinctrl 0 0 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <17>;
};
gpb: gpio@1 {
compatible = "ingenic,jz4770-gpio";
reg = <1>;
gpio-controller;
gpio-ranges = <&pinctrl 0 32 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <16>;
};
gpc: gpio@2 {
compatible = "ingenic,jz4770-gpio";
reg = <2>;
gpio-controller;
gpio-ranges = <&pinctrl 0 64 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <15>;
};
gpd: gpio@3 {
compatible = "ingenic,jz4770-gpio";
reg = <3>;
gpio-controller;
gpio-ranges = <&pinctrl 0 96 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <14>;
};
gpe: gpio@4 {
compatible = "ingenic,jz4770-gpio";
reg = <4>;
gpio-controller;
gpio-ranges = <&pinctrl 0 128 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <13>;
};
gpf: gpio@5 {
compatible = "ingenic,jz4770-gpio";
reg = <5>;
gpio-controller;
gpio-ranges = <&pinctrl 0 160 32>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&intc>;
interrupts = <12>;
};
};
uart0: serial@10030000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10030000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART0>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <5>;
status = "disabled";
};
uart1: serial@10031000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10031000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART1>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <4>;
status = "disabled";
};
uart2: serial@10032000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10032000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART2>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <3>;
status = "disabled";
};
uart3: serial@10033000 {
compatible = "ingenic,jz4770-uart";
reg = <0x10033000 0x100>;
clocks = <&ext>, <&cgu JZ4770_CLK_UART3>;
clock-names = "baud", "module";
interrupt-parent = <&intc>;
interrupts = <2>;
status = "disabled";
};
uhc: uhc@13430000 {
compatible = "generic-ohci";
reg = <0x13430000 0x1000>;
clocks = <&cgu JZ4770_CLK_UHC>, <&cgu JZ4770_CLK_UHC_PHY>;
assigned-clocks = <&cgu JZ4770_CLK_UHC>;
assigned-clock-rates = <48000000>;
interrupt-parent = <&intc>;
interrupts = <20>;
status = "disabled";
};
};
...@@ -18,6 +18,12 @@ config MACH_JZ4740 ...@@ -18,6 +18,12 @@ config MACH_JZ4740
bool bool
select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R1
config MACH_JZ4770
bool
select MIPS_CPU_SCACHE
select SYS_HAS_CPU_MIPS32_R2
select SYS_SUPPORTS_HIGHMEM
config MACH_JZ4780 config MACH_JZ4780
bool bool
select MIPS_CPU_SCACHE select MIPS_CPU_SCACHE
......
...@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = { ...@@ -113,7 +113,7 @@ static struct clock_event_device jz4740_clockevent = {
#ifdef CONFIG_MACH_JZ4740 #ifdef CONFIG_MACH_JZ4740
.irq = JZ4740_IRQ_TCU0, .irq = JZ4740_IRQ_TCU0,
#endif #endif
#ifdef CONFIG_MACH_JZ4780 #if defined(CONFIG_MACH_JZ4770) || defined(CONFIG_MACH_JZ4780)
.irq = JZ4780_IRQ_TCU2, .irq = JZ4780_IRQ_TCU2,
#endif #endif
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment