Commit 9cbc1b68 authored by Robert Hancock's avatar Robert Hancock Committed by David S. Miller

net: axienet: Support shared interrupts

Specify IRQF_SHARED to support shared interrupts. If the interrupt
handler is called and the device is not indicating an interrupt,
just return IRQ_NONE rather than spewing error messages.
Signed-off-by: default avatarRobert Hancock <hancock@sedsystems.ca>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 867d03bc
...@@ -809,7 +809,7 @@ static void axienet_recv(struct net_device *ndev) ...@@ -809,7 +809,7 @@ static void axienet_recv(struct net_device *ndev)
* @irq: irq number * @irq: irq number
* @_ndev: net_device pointer * @_ndev: net_device pointer
* *
* Return: IRQ_HANDLED for all cases. * Return: IRQ_HANDLED if device generated a TX interrupt, IRQ_NONE otherwise.
* *
* This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done"
* to complete the BD processing. * to complete the BD processing.
...@@ -828,7 +828,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev) ...@@ -828,7 +828,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
goto out; goto out;
} }
if (!(status & XAXIDMA_IRQ_ALL_MASK)) if (!(status & XAXIDMA_IRQ_ALL_MASK))
dev_err(&ndev->dev, "No interrupts asserted in Tx path\n"); return IRQ_NONE;
if (status & XAXIDMA_IRQ_ERROR_MASK) { if (status & XAXIDMA_IRQ_ERROR_MASK) {
dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status); dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status);
dev_err(&ndev->dev, "Current BD is at: 0x%x\n", dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
...@@ -858,7 +858,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev) ...@@ -858,7 +858,7 @@ static irqreturn_t axienet_tx_irq(int irq, void *_ndev)
* @irq: irq number * @irq: irq number
* @_ndev: net_device pointer * @_ndev: net_device pointer
* *
* Return: IRQ_HANDLED for all cases. * Return: IRQ_HANDLED if device generated a RX interrupt, IRQ_NONE otherwise.
* *
* This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD
* processing. * processing.
...@@ -877,7 +877,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev) ...@@ -877,7 +877,7 @@ static irqreturn_t axienet_rx_irq(int irq, void *_ndev)
goto out; goto out;
} }
if (!(status & XAXIDMA_IRQ_ALL_MASK)) if (!(status & XAXIDMA_IRQ_ALL_MASK))
dev_err(&ndev->dev, "No interrupts asserted in Rx path\n"); return IRQ_NONE;
if (status & XAXIDMA_IRQ_ERROR_MASK) { if (status & XAXIDMA_IRQ_ERROR_MASK) {
dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status); dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status);
dev_err(&ndev->dev, "Current BD is at: 0x%x\n", dev_err(&ndev->dev, "Current BD is at: 0x%x\n",
...@@ -953,11 +953,13 @@ static int axienet_open(struct net_device *ndev) ...@@ -953,11 +953,13 @@ static int axienet_open(struct net_device *ndev)
(unsigned long) lp); (unsigned long) lp);
/* Enable interrupts for Axi DMA Tx */ /* Enable interrupts for Axi DMA Tx */
ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); ret = request_irq(lp->tx_irq, axienet_tx_irq, IRQF_SHARED,
ndev->name, ndev);
if (ret) if (ret)
goto err_tx_irq; goto err_tx_irq;
/* Enable interrupts for Axi DMA Rx */ /* Enable interrupts for Axi DMA Rx */
ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); ret = request_irq(lp->rx_irq, axienet_rx_irq, IRQF_SHARED,
ndev->name, ndev);
if (ret) if (ret)
goto err_rx_irq; goto err_rx_irq;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment