Merge tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 - add types for USB Type C and PD chargers
 - add act8945a charger driver
 - add ACPI/DT bindings for goldfish-battery
 - add support for versatile reset controller
 - misc fixes

* tag 'for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (24 commits)
  power: pm2301-charger: use __maybe_unused to hide pm functions
  power: ipaq-micro-battery: use __maybe_unused to hide pm functions
  power_supply: 88pm860x_charger: do not pass NULL to power_supply_put
  jz4740-battery: Correct voltage change check
  power_supply: lp8788-charger: initialize boolean 'found'
  goldfish: Enable ACPI-based enumeration for goldfish battery
  power: goldfish_battery: add devicetree bindings
  power: act8945a: add charger driver for ACT8945A
  power: add documentation for ACT8945A's charger DT bindings
  ARM: dts: n900: Rename isp1704 to isp1707 to match correct name
  power_supply: bq27xxx_battery: Add of modalias and match table when CONFIG_OF is enabled
  power_supply: bq2415x_charger: Add of modalias and match table when CONFIG_OF is enabled
  power_supply: bq2415x_charger: Do not add acpi modalias when CONFIG_ACPI is not enabled
  power_supply: isp1704_charger: Add compatible of match for nxp,isp1707
  power_supply: isp1704_charger: Error messages when probe fail
  power_supply: Add types for USB Type C and PD chargers
  power: bq24735-charger: add 'ti,external-control' option
  power: bq24735-charger: document 'ti,external-control' option
  power: bq24735-charger: fix failed i2c with ac-detect
  power: reset: Fix dependencies for !HAS_IOMEM archs
  ...

Documentation/devicetree/bindings/goldfish/battery.txt

+Android Goldfish Battery
+
+Android goldfish battery device generated by android emulator.
+
+Required properties:
+
+- compatible : should contain "google,goldfish-battery" to match emulator
+- reg        : <registers mapping>
+- interrupts : <interrupt mapping>
+
+Example:
+
+	goldfish_battery@9020000 {
+		compatible = "google,goldfish-battery";
+		reg = <0x9020000 0x1000>;
+		interrupts = <0x3>;
+	};

Documentation/devicetree/bindings/power/act8945a-charger.txt

+Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
+
+Required properties:
+ - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
+ - active-semi,chglev-gpios: charge current level phandle with args
+   as described in ../gpio/gpio.txt.
+
+Optional properties:
+ - active-semi,check-battery-temperature: boolean to check the battery
+   temperature or not.
+ - active-semi,input-voltage-threshold-microvolt: unit: mV;
+   Specifies the charger's input over-voltage threshold value;
+   The value can be: 6600, 7000, 7500, 8000; default: 6600
+ - active-semi,precondition-timeout: unit: minutes;
+   Specifies the charger's PRECONDITION safety timer setting value;
+   The value can be: 40, 60, 80, 0; If 0, it means to disable this timer;
+   default: 40.
+ - active-semi,total-timeout: unit: hours;
+   Specifies the charger's total safety timer setting value;
+   The value can be: 3, 4, 5, 0; If 0, it means to disable this timer;
+   default: 3.
+
+Example:
+	pmic@5b {
+		compatible = "active-semi,act8945a";
+		reg = <0x5b>;
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_charger_chglev>;
+		active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+		active-semi,input-voltage-threshold-microvolt = <6600>;
+		active-semi,precondition-timeout = <40>;
+		active-semi,total-timeout = <3>;
+	};

Documentation/devicetree/bindings/power_supply/ti,bq24735.txt

@@ -22,6 +22,9 @@ Optional properties :
    value must be between 128mA and 8.064A with a 128mA step resolution. The
    POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
    more information about the InputCurrent (0x3fh) register.
+ - ti,external-control : Indicates that the charger is configured externally
+   and that the host should not attempt to enable/disable charging or set the
+   charge voltage/current.
 
 Example:
 

arch/arm/boot/dts/omap3-n900.dts

@@ -107,8 +107,8 @@ proximity_sensor {
 		};
 	};
 
-	isp1704: isp1704 {
-		compatible = "nxp,isp1704";
+	isp1707: isp1707 {
+		compatible = "nxp,isp1707";
 		nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
 		usb-phy = <&usb2_phy>;
 	};
@@ -618,7 +618,7 @@ bq24150a: bq24150a@6b {
 		ti,termination-current = <100>;
 		ti,resistor-sense = <68>;
 
-		ti,usb-charger-detection = <&isp1704>;
+		ti,usb-charger-detection = <&isp1707>;
 	};
 };
 

drivers/power/88pm860x_charger.c

@@ -435,7 +435,7 @@ static irqreturn_t pm860x_temp_handler(int irq, void *data)
 
 	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
 	if (!psy)
-		goto out;
+		return IRQ_HANDLED;
 	ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
 	if (ret)
 		goto out;

drivers/power/Kconfig

@@ -75,6 +75,13 @@ config BATTERY_88PM860X
 	help
 	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
 
+config BATTERY_ACT8945A
+	tristate "Active-semi ACT8945A charger driver"
+	depends on MFD_ACT8945A || COMPILE_TEST
+	help
+	  Say Y here to enable support for power supply provided by
+	  Active-semi ActivePath ACT8945A charger.
+
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
 	depends on W1 && W1_SLAVE_DS2760

drivers/power/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
+obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o

drivers/power/act8945a_charger.c

+/*
+ * Power supply driver for the Active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+static const char *act8945a_charger_model = "ACT8945A";
+static const char *act8945a_charger_manufacturer = "Active-semi";
+
+/**
+ * ACT8945A Charger Register Map
+ */
+
+/* 0x70: Reserved */
+#define ACT8945A_APCH_CFG		0x71
+#define ACT8945A_APCH_STATUS		0x78
+#define ACT8945A_APCH_CTRL		0x79
+#define ACT8945A_APCH_STATE		0x7A
+
+/* ACT8945A_APCH_CFG */
+#define APCH_CFG_OVPSET			(0x3 << 0)
+#define APCH_CFG_OVPSET_6V6		(0x0 << 0)
+#define APCH_CFG_OVPSET_7V		(0x1 << 0)
+#define APCH_CFG_OVPSET_7V5		(0x2 << 0)
+#define APCH_CFG_OVPSET_8V		(0x3 << 0)
+#define APCH_CFG_PRETIMO		(0x3 << 2)
+#define APCH_CFG_PRETIMO_40_MIN		(0x0 << 2)
+#define APCH_CFG_PRETIMO_60_MIN		(0x1 << 2)
+#define APCH_CFG_PRETIMO_80_MIN		(0x2 << 2)
+#define APCH_CFG_PRETIMO_DISABLED	(0x3 << 2)
+#define APCH_CFG_TOTTIMO		(0x3 << 4)
+#define APCH_CFG_TOTTIMO_3_HOUR		(0x0 << 4)
+#define APCH_CFG_TOTTIMO_4_HOUR		(0x1 << 4)
+#define APCH_CFG_TOTTIMO_5_HOUR		(0x2 << 4)
+#define APCH_CFG_TOTTIMO_DISABLED	(0x3 << 4)
+#define APCH_CFG_SUSCHG			(0x1 << 7)
+
+#define APCH_STATUS_CHGDAT		BIT(0)
+#define APCH_STATUS_INDAT		BIT(1)
+#define APCH_STATUS_TEMPDAT		BIT(2)
+#define APCH_STATUS_TIMRDAT		BIT(3)
+#define APCH_STATUS_CHGSTAT		BIT(4)
+#define APCH_STATUS_INSTAT		BIT(5)
+#define APCH_STATUS_TEMPSTAT		BIT(6)
+#define APCH_STATUS_TIMRSTAT		BIT(7)
+
+#define APCH_CTRL_CHGEOCOUT		BIT(0)
+#define APCH_CTRL_INDIS			BIT(1)
+#define APCH_CTRL_TEMPOUT		BIT(2)
+#define APCH_CTRL_TIMRPRE		BIT(3)
+#define APCH_CTRL_CHGEOCIN		BIT(4)
+#define APCH_CTRL_INCON			BIT(5)
+#define APCH_CTRL_TEMPIN		BIT(6)
+#define APCH_CTRL_TIMRTOT		BIT(7)
+
+#define APCH_STATE_ACINSTAT		(0x1 << 1)
+#define APCH_STATE_CSTATE		(0x3 << 4)
+#define APCH_STATE_CSTATE_SHIFT		4
+#define APCH_STATE_CSTATE_DISABLED	0x00
+#define APCH_STATE_CSTATE_EOC		0x01
+#define APCH_STATE_CSTATE_FAST		0x02
+#define APCH_STATE_CSTATE_PRE		0x03
+
+struct act8945a_charger {
+	struct regmap *regmap;
+	bool battery_temperature;
+};
+
+static int act8945a_get_charger_state(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status, state;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	if (state == APCH_STATE_CSTATE_EOC) {
+		if (status & APCH_STATUS_CHGDAT)
+			*val = POWER_SUPPLY_STATUS_FULL;
+		else
+			*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else if ((state == APCH_STATE_CSTATE_FAST) ||
+		   (state == APCH_STATE_CSTATE_PRE)) {
+		*val = POWER_SUPPLY_STATUS_CHARGING;
+	} else {
+		*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	}
+
+	return 0;
+}
+
+static int act8945a_get_charge_type(struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int state;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+	if (ret < 0)
+		return ret;
+
+	state &= APCH_STATE_CSTATE;
+	state >>= APCH_STATE_CSTATE_SHIFT;
+
+	switch (state) {
+	case APCH_STATE_CSTATE_PRE:
+		*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+		break;
+	case APCH_STATE_CSTATE_FAST:
+		*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+		break;
+	case APCH_STATE_CSTATE_EOC:
+	case APCH_STATE_CSTATE_DISABLED:
+	default:
+		*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+	}
+
+	return 0;
+}
+
+static int act8945a_get_battery_health(struct act8945a_charger *charger,
+				       struct regmap *regmap, int *val)
+{
+	int ret;
+	unsigned int status;
+
+	ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+	if (ret < 0)
+		return ret;
+
+	if (charger->battery_temperature && !(status & APCH_STATUS_TEMPDAT))
+		*val = POWER_SUPPLY_HEALTH_OVERHEAT;
+	else if (!(status & APCH_STATUS_INDAT))
+		*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+	else if (status & APCH_STATUS_TIMRDAT)
+		*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+	else
+		*val = POWER_SUPPLY_HEALTH_GOOD;
+
+	return 0;
+}
+
+static enum power_supply_property act8945a_charger_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER
+};
+
+static int act8945a_charger_get_property(struct power_supply *psy,
+					 enum power_supply_property prop,
+					 union power_supply_propval *val)
+{
+	struct act8945a_charger *charger = power_supply_get_drvdata(psy);
+	struct regmap *regmap = charger->regmap;
+	int ret = 0;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = act8945a_get_charger_state(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		ret = act8945a_get_charge_type(regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_HEALTH:
+		ret = act8945a_get_battery_health(charger,
+						  regmap, &val->intval);
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = act8945a_charger_model;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = act8945a_charger_manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct power_supply_desc act8945a_charger_desc = {
+	.name		= "act8945a-charger",
+	.type		= POWER_SUPPLY_TYPE_BATTERY,
+	.get_property	= act8945a_charger_get_property,
+	.properties	= act8945a_charger_props,
+	.num_properties	= ARRAY_SIZE(act8945a_charger_props),
+};
+
+#define DEFAULT_TOTAL_TIME_OUT		3
+#define DEFAULT_PRE_TIME_OUT		40
+#define DEFAULT_INPUT_OVP_THRESHOLD	6600
+
+static int act8945a_charger_config(struct device *dev,
+				   struct act8945a_charger *charger)
+{
+	struct device_node *np = dev->of_node;
+	enum of_gpio_flags flags;
+	struct regmap *regmap = charger->regmap;
+
+	u32 total_time_out;
+	u32 pre_time_out;
+	u32 input_voltage_threshold;
+	int chglev_pin;
+
+	unsigned int value = 0;
+
+	if (!np) {
+		dev_err(dev, "no charger of node\n");
+		return -EINVAL;
+	}
+
+	charger->battery_temperature = of_property_read_bool(np,
+				"active-semi,check-battery-temperature");
+
+	chglev_pin = of_get_named_gpio_flags(np,
+				"active-semi,chglev-gpios", 0, &flags);
+
+	if (gpio_is_valid(chglev_pin)) {
+		gpio_set_value(chglev_pin,
+			       ((flags == OF_GPIO_ACTIVE_LOW) ? 0 : 1));
+	}
+
+	if (of_property_read_u32(np,
+				 "active-semi,input-voltage-threshold-microvolt",
+				 &input_voltage_threshold))
+		input_voltage_threshold = DEFAULT_INPUT_OVP_THRESHOLD;
+
+	if (of_property_read_u32(np,
+				 "active-semi,precondition-timeout",
+				 &pre_time_out))
+		pre_time_out = DEFAULT_PRE_TIME_OUT;
+
+	if (of_property_read_u32(np, "active-semi,total-timeout",
+				 &total_time_out))
+		total_time_out = DEFAULT_TOTAL_TIME_OUT;
+
+	switch (input_voltage_threshold) {
+	case 8000:
+		value |= APCH_CFG_OVPSET_8V;
+		break;
+	case 7500:
+		value |= APCH_CFG_OVPSET_7V5;
+		break;
+	case 7000:
+		value |= APCH_CFG_OVPSET_7V;
+		break;
+	case 6600:
+	default:
+		value |= APCH_CFG_OVPSET_6V6;
+		break;
+	}
+
+	switch (pre_time_out) {
+	case 60:
+		value |= APCH_CFG_PRETIMO_60_MIN;
+		break;
+	case 80:
+		value |= APCH_CFG_PRETIMO_80_MIN;
+		break;
+	case 0:
+		value |= APCH_CFG_PRETIMO_DISABLED;
+		break;
+	case 40:
+	default:
+		value |= APCH_CFG_PRETIMO_40_MIN;
+		break;
+	}
+
+	switch (total_time_out) {
+	case 4:
+		value |= APCH_CFG_TOTTIMO_4_HOUR;
+		break;
+	case 5:
+		value |= APCH_CFG_TOTTIMO_5_HOUR;
+		break;
+	case 0:
+		value |= APCH_CFG_TOTTIMO_DISABLED;
+		break;
+	case 3:
+	default:
+		value |= APCH_CFG_TOTTIMO_3_HOUR;
+		break;
+	}
+
+	return regmap_write(regmap, ACT8945A_APCH_CFG, value);
+}
+
+static int act8945a_charger_probe(struct platform_device *pdev)
+{
+	struct act8945a_charger *charger;
+	struct power_supply *psy;
+	struct power_supply_config psy_cfg = {};
+	int ret;
+
+	charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!charger->regmap) {
+		dev_err(&pdev->dev, "Parent did not provide regmap\n");
+		return -EINVAL;
+	}
+
+	ret = act8945a_charger_config(pdev->dev.parent, charger);
+	if (ret)
+		return ret;
+
+	psy_cfg.of_node	= pdev->dev.parent->of_node;
+	psy_cfg.drv_data = charger;
+
+	psy = devm_power_supply_register(&pdev->dev,
+					 &act8945a_charger_desc,
+					 &psy_cfg);
+	if (IS_ERR(psy)) {
+		dev_err(&pdev->dev, "failed to register power supply\n");
+		return PTR_ERR(psy);
+	}
+
+	return 0;
+}
+
+static struct platform_driver act8945a_charger_driver = {
+	.driver	= {
+		.name = "act8945a-charger",
+	},
+	.probe	= act8945a_charger_probe,
+};
+module_platform_driver(act8945a_charger_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");

drivers/power/bq2415x_charger.c

@@ -1759,6 +1759,7 @@ static const struct i2c_device_id bq2415x_i2c_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
 
+#ifdef CONFIG_ACPI
 static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
 	{ "BQ2415X", BQUNKNOWN },
 	{ "BQ241500", BQ24150 },
@@ -1776,10 +1777,31 @@ static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq2415x_of_match_table[] = {
+	{ .compatible = "ti,bq24150" },
+	{ .compatible = "ti,bq24150a" },
+	{ .compatible = "ti,bq24151" },
+	{ .compatible = "ti,bq24151a" },
+	{ .compatible = "ti,bq24152" },
+	{ .compatible = "ti,bq24153" },
+	{ .compatible = "ti,bq24153a" },
+	{ .compatible = "ti,bq24155" },
+	{ .compatible = "ti,bq24156" },
+	{ .compatible = "ti,bq24156a" },
+	{ .compatible = "ti,bq24157s" },
+	{ .compatible = "ti,bq24158" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq2415x_of_match_table);
+#endif
 
 static struct i2c_driver bq2415x_driver = {
 	.driver = {
 		.name = "bq2415x-charger",
+		.of_match_table = of_match_ptr(bq2415x_of_match_table),
 		.acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
 	},
 	.probe = bq2415x_probe,

drivers/power/bq24735-charger.c

@@ -48,6 +48,8 @@ struct bq24735 {
 	struct power_supply_desc	charger_desc;
 	struct i2c_client		*client;
 	struct bq24735_platform		*pdata;
+	struct mutex			lock;
+	bool				charging;
 };
 
 static inline struct bq24735 *to_bq24735(struct power_supply *psy)
@@ -56,9 +58,23 @@ static inline struct bq24735 *to_bq24735(struct power_supply *psy)
 }
 
 static enum power_supply_property bq24735_charger_properties[] = {
+	POWER_SUPPLY_PROP_STATUS,
 	POWER_SUPPLY_PROP_ONLINE,
 };
 
+static int bq24735_charger_property_is_writeable(struct power_supply *psy,
+						 enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return 1;
+	default:
+		break;
+	}
+
+	return 0;
+}
+
 static inline int bq24735_write_word(struct i2c_client *client, u8 reg,
 				     u16 value)
 {
@@ -90,6 +106,9 @@ static int bq24735_update_word(struct i2c_client *client, u8 reg,
 
 static inline int bq24735_enable_charging(struct bq24735 *charger)
 {
+	if (charger->pdata->ext_control)
+		return 0;
+
 	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
 				   BQ24735_CHG_OPT_CHARGE_DISABLE,
 				   ~BQ24735_CHG_OPT_CHARGE_DISABLE);
@@ -97,6 +116,9 @@ static inline int bq24735_enable_charging(struct bq24735 *charger)
 
 static inline int bq24735_disable_charging(struct bq24735 *charger)
 {
+	if (charger->pdata->ext_control)
+		return 0;
+
 	return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
 				   BQ24735_CHG_OPT_CHARGE_DISABLE,
 				   BQ24735_CHG_OPT_CHARGE_DISABLE);
@@ -108,6 +130,9 @@ static int bq24735_config_charger(struct bq24735 *charger)
 	int ret;
 	u16 value;
 
+	if (pdata->ext_control)
+		return 0;
+
 	if (pdata->charge_current) {
 		value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
 
@@ -174,16 +199,30 @@ static bool bq24735_charger_is_present(struct bq24735 *charger)
 	return false;
 }
 
+static int bq24735_charger_is_charging(struct bq24735 *charger)
+{
+	int ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+
+	if (ret < 0)
+		return ret;
+
+	return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
 static irqreturn_t bq24735_charger_isr(int irq, void *devid)
 {
 	struct power_supply *psy = devid;
 	struct bq24735 *charger = to_bq24735(psy);
 
-	if (bq24735_charger_is_present(charger))
+	mutex_lock(&charger->lock);
+
+	if (charger->charging && bq24735_charger_is_present(charger))
 		bq24735_enable_charging(charger);
 	else
 		bq24735_disable_charging(charger);
 
+	mutex_unlock(&charger->lock);
+
 	power_supply_changed(psy);
 
 	return IRQ_HANDLED;
@@ -199,9 +238,62 @@ static int bq24735_charger_get_property(struct power_supply *psy,
 	case POWER_SUPPLY_PROP_ONLINE:
 		val->intval = bq24735_charger_is_present(charger) ? 1 : 0;
 		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (bq24735_charger_is_charging(charger)) {
+		case 1:
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+			break;
+		case 0:
+			val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+			break;
+		default:
+			val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+			break;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bq24735_charger_set_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					const union power_supply_propval *val)
+{
+	struct bq24735 *charger = to_bq24735(psy);
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		switch (val->intval) {
+		case POWER_SUPPLY_STATUS_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = true;
+			ret = bq24735_enable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			bq24735_config_charger(charger);
+			break;
+		case POWER_SUPPLY_STATUS_DISCHARGING:
+		case POWER_SUPPLY_STATUS_NOT_CHARGING:
+			mutex_lock(&charger->lock);
+			charger->charging = false;
+			ret = bq24735_disable_charging(charger);
+			mutex_unlock(&charger->lock);
+			if (ret)
+				return ret;
+			break;
 		default:
 			return -EINVAL;
 		}
+		power_supply_changed(psy);
+		break;
+	default:
+		return -EPERM;
+	}
 
 	return 0;
 }
@@ -239,6 +331,8 @@ static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
 	if (!ret)
 		pdata->input_current = val;
 
+	pdata->ext_control = of_property_read_bool(np, "ti,external-control");
+
 	return pdata;
 }
 
@@ -255,6 +349,8 @@ static int bq24735_charger_probe(struct i2c_client *client,
 	if (!charger)
 		return -ENOMEM;
 
+	mutex_init(&charger->lock);
+	charger->charging = true;
 	charger->pdata = client->dev.platform_data;
 
 	if (IS_ENABLED(CONFIG_OF) && !charger->pdata && client->dev.of_node)
@@ -285,6 +381,9 @@ static int bq24735_charger_probe(struct i2c_client *client,
 	supply_desc->properties = bq24735_charger_properties;
 	supply_desc->num_properties = ARRAY_SIZE(bq24735_charger_properties);
 	supply_desc->get_property = bq24735_charger_get_property;
+	supply_desc->set_property = bq24735_charger_set_property;
+	supply_desc->property_is_writeable =
+				bq24735_charger_property_is_writeable;
 
 	psy_cfg.supplied_to = charger->pdata->supplied_to;
 	psy_cfg.num_supplicants = charger->pdata->num_supplicants;
@@ -293,6 +392,21 @@ static int bq24735_charger_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, charger);
 
+	if (gpio_is_valid(charger->pdata->status_gpio)) {
+		ret = devm_gpio_request(&client->dev,
+					charger->pdata->status_gpio,
+					name);
+		if (ret) {
+			dev_err(&client->dev,
+				"Failed GPIO request for GPIO %d: %d\n",
+				charger->pdata->status_gpio, ret);
+		}
+
+		charger->pdata->status_gpio_valid = !ret;
+	}
+
+	if (!charger->pdata->status_gpio_valid
+	    || bq24735_charger_is_present(charger)) {
 		ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
 		if (ret < 0) {
 			dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
@@ -313,18 +427,6 @@ static int bq24735_charger_probe(struct i2c_client *client,
 				"device id mismatch. 0x000b != 0x%04x\n", ret);
 			return -ENODEV;
 		}
-
-	if (gpio_is_valid(charger->pdata->status_gpio)) {
-		ret = devm_gpio_request(&client->dev,
-					charger->pdata->status_gpio,
-					name);
-		if (ret) {
-			dev_err(&client->dev,
-				"Failed GPIO request for GPIO %d: %d\n",
-				charger->pdata->status_gpio, ret);
-		}
-
-		charger->pdata->status_gpio_valid = !ret;
 	}
 
 	ret = bq24735_config_charger(charger);

drivers/power/bq27xxx_battery.c

@@ -46,6 +46,7 @@
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <linux/power/bq27xxx_battery.h>
 
@@ -1090,16 +1091,27 @@ static const struct platform_device_id bq27xxx_battery_platform_id_table[] = {
 };
 MODULE_DEVICE_TABLE(platform, bq27xxx_battery_platform_id_table);
 
+#ifdef CONFIG_OF
+static const struct of_device_id bq27xxx_battery_platform_of_match_table[] = {
+	{ .compatible = "ti,bq27000" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq27xxx_battery_platform_of_match_table);
+#endif
+
 static struct platform_driver bq27xxx_battery_platform_driver = {
 	.probe	= bq27xxx_battery_platform_probe,
 	.remove = bq27xxx_battery_platform_remove,
 	.driver = {
 		.name = "bq27000-battery",
+		.of_match_table = of_match_ptr(bq27xxx_battery_platform_of_match_table),
 	},
 	.id_table = bq27xxx_battery_platform_id_table,
 };
 module_platform_driver(bq27xxx_battery_platform_driver);
 
+MODULE_ALIAS("platform:bq27000-battery");
+
 MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
 MODULE_DESCRIPTION("BQ27xxx battery monitor driver");
 MODULE_LICENSE("GPL");

drivers/power/bq27xxx_battery_i2c.c

@@ -166,9 +166,33 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
 
+#ifdef CONFIG_OF
+static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
+	{ .compatible = "ti,bq27200" },
+	{ .compatible = "ti,bq27210" },
+	{ .compatible = "ti,bq27500" },
+	{ .compatible = "ti,bq27510" },
+	{ .compatible = "ti,bq27520" },
+	{ .compatible = "ti,bq27530" },
+	{ .compatible = "ti,bq27531" },
+	{ .compatible = "ti,bq27541" },
+	{ .compatible = "ti,bq27542" },
+	{ .compatible = "ti,bq27546" },
+	{ .compatible = "ti,bq27742" },
+	{ .compatible = "ti,bq27545" },
+	{ .compatible = "ti,bq27421" },
+	{ .compatible = "ti,bq27425" },
+	{ .compatible = "ti,bq27441" },
+	{ .compatible = "ti,bq27621" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
+#endif
+
 static struct i2c_driver bq27xxx_battery_i2c_driver = {
 	.driver = {
 		.name = "bq27xxx-battery",
+		.of_match_table = of_match_ptr(bq27xxx_battery_i2c_of_match_table),
 	},
 	.probe = bq27xxx_battery_i2c_probe,
 	.remove = bq27xxx_battery_i2c_remove,

drivers/power/collie_battery.c

@@ -26,7 +26,6 @@
 static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
 static struct work_struct bat_work;
 static struct ucb1x00 *ucb;
-static int wakeup_enabled;
 
 struct collie_bat {
 	int status;
@@ -291,6 +290,8 @@ static struct gpio collie_batt_gpios[] = {
 };
 
 #ifdef CONFIG_PM
+static int wakeup_enabled;
+
 static int collie_bat_suspend(struct ucb1x00_dev *dev)
 {
 	/* flush all pending status updates */

drivers/power/goldfish_battery.c

@@ -24,6 +24,7 @@
 #include <linux/pci.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/acpi.h>
 
 struct goldfish_battery_data {
 	void __iomem *reg_base;
@@ -227,11 +228,25 @@ static int goldfish_battery_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id goldfish_battery_of_match[] = {
+	{ .compatible = "google,goldfish-battery", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, goldfish_battery_of_match);
+
+static const struct acpi_device_id goldfish_battery_acpi_match[] = {
+	{ "GFSH0001", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_battery_acpi_match);
+
 static struct platform_driver goldfish_battery_device = {
 	.probe		= goldfish_battery_probe,
 	.remove		= goldfish_battery_remove,
 	.driver = {
-		.name = "goldfish-battery"
+		.name = "goldfish-battery",
+		.of_match_table = goldfish_battery_of_match,
+		.acpi_match_table = ACPI_PTR(goldfish_battery_acpi_match),
 	}
 };
 module_platform_driver(goldfish_battery_device);

drivers/power/ipaq_micro_battery.c

@@ -281,7 +281,7 @@ static int micro_batt_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int micro_batt_suspend(struct device *dev)
+static int __maybe_unused micro_batt_suspend(struct device *dev)
 {
 	struct micro_battery *mb = dev_get_drvdata(dev);
 
@@ -289,7 +289,7 @@ static int micro_batt_suspend(struct device *dev)
 	return 0;
 }
 
-static int micro_batt_resume(struct device *dev)
+static int __maybe_unused micro_batt_resume(struct device *dev)
 {
 	struct micro_battery *mb = dev_get_drvdata(dev);
 

drivers/power/isp1704_charger.c

@@ -411,8 +411,10 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 	if (np) {
 		int gpio = of_get_named_gpio(np, "nxp,enable-gpio", 0);
 
-		if (gpio < 0)
+		if (gpio < 0) {
+			dev_err(&pdev->dev, "missing DT GPIO nxp,enable-gpio\n");
 			return gpio;
+		}
 
 		pdata = devm_kzalloc(&pdev->dev,
 			sizeof(struct isp1704_charger_data), GFP_KERNEL);
@@ -422,9 +424,11 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 
 		ret = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
 					GPIOF_OUT_INIT_HIGH, "isp1704_reset");
-		if (ret)
+		if (ret) {
+			dev_err(&pdev->dev, "gpio request failed\n");
 			goto fail0;
 		}
+	}
 
 	if (!pdata) {
 		dev_err(&pdev->dev, "missing platform data!\n");
@@ -443,6 +447,7 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 
 	if (IS_ERR(isp->phy)) {
 		ret = PTR_ERR(isp->phy);
+		dev_err(&pdev->dev, "usb_get_phy failed\n");
 		goto fail0;
 	}
 
@@ -452,8 +457,10 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 	isp1704_charger_set_power(isp, 1);
 
 	ret = isp1704_test_ulpi(isp);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(&pdev->dev, "isp1704_test_ulpi failed\n");
 		goto fail1;
+	}
 
 	isp->psy_desc.name		= "isp1704";
 	isp->psy_desc.type		= POWER_SUPPLY_TYPE_USB;
@@ -466,6 +473,7 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 	isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg);
 	if (IS_ERR(isp->psy)) {
 		ret = PTR_ERR(isp->psy);
+		dev_err(&pdev->dev, "power_supply_register failed\n");
 		goto fail1;
 	}
 
@@ -478,8 +486,10 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 	isp->nb.notifier_call = isp1704_notifier_call;
 
 	ret = usb_register_notifier(isp->phy, &isp->nb);
-	if (ret)
+	if (ret) {
+		dev_err(&pdev->dev, "usb_register_notifier failed\n");
 		goto fail2;
+	}
 
 	dev_info(isp->dev, "registered with product id %s\n", isp->model);
 
@@ -526,6 +536,7 @@ static int isp1704_charger_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id omap_isp1704_of_match[] = {
 	{ .compatible = "nxp,isp1704", },
+	{ .compatible = "nxp,isp1707", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);

drivers/power/jz4740-battery.c

@@ -208,7 +208,7 @@ static void jz_battery_update(struct jz_battery *jz_battery)
 	}
 
 	voltage = jz_battery_read_voltage(jz_battery);
-	if (abs(voltage - jz_battery->voltage) < 50000) {
+	if (voltage >= 0 && abs(voltage - jz_battery->voltage) > 50000) {
 		jz_battery->voltage = voltage;
 		has_changed = true;
 	}

drivers/power/lp8788-charger.c

@@ -455,7 +455,7 @@ static void lp8788_charger_event(struct work_struct *work)
 
 static bool lp8788_find_irq_id(struct lp8788_charger *pchg, int virq, int *id)
 {
-	bool found;
+	bool found = false;
 	int i;
 
 	for (i = 0; i < pchg->num_irqs; i++) {

drivers/power/pm2301_charger.c

@@ -911,11 +911,7 @@ static struct pm2xxx_irq pm2xxx_charger_irq[] = {
 	{"PM2XXX_IRQ_INT", pm2xxx_irq_int},
 };
 
-#ifdef CONFIG_PM
-
-#ifdef CONFIG_PM_SLEEP
-
-static int pm2xxx_wall_charger_resume(struct device *dev)
+static int __maybe_unused pm2xxx_wall_charger_resume(struct device *dev)
 {
 	struct i2c_client *i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
@@ -931,7 +927,7 @@ static int pm2xxx_wall_charger_resume(struct device *dev)
 	return 0;
 }
 
-static int pm2xxx_wall_charger_suspend(struct device *dev)
+static int __maybe_unused pm2xxx_wall_charger_suspend(struct device *dev)
 {
 	struct i2c_client *i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
@@ -949,9 +945,7 @@ static int pm2xxx_wall_charger_suspend(struct device *dev)
 	return 0;
 }
 
-#endif
-
-static int  pm2xxx_runtime_suspend(struct device *dev)
+static int __maybe_unused pm2xxx_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
@@ -962,7 +956,7 @@ static int  pm2xxx_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int  pm2xxx_runtime_resume(struct device *dev)
+static int __maybe_unused pm2xxx_runtime_resume(struct device *dev)
 {
 	struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
 	struct pm2xxx_charger *pm2;
@@ -975,15 +969,11 @@ static int  pm2xxx_runtime_resume(struct device *dev)
 	return 0;
 }
 
-static const struct dev_pm_ops pm2xxx_pm_ops = {
+static const struct dev_pm_ops pm2xxx_pm_ops __maybe_unused = {
 	SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend,
 		pm2xxx_wall_charger_resume)
 	SET_RUNTIME_PM_OPS(pm2xxx_runtime_suspend, pm2xxx_runtime_resume, NULL)
 };
-#define  PM2XXX_PM_OPS (&pm2xxx_pm_ops)
-#else
-#define  PM2XXX_PM_OPS  NULL
-#endif
 
 static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
 		const struct i2c_device_id *id)
@@ -1244,7 +1234,7 @@ static struct i2c_driver pm2xxx_charger_driver = {
 	.remove = pm2xxx_wall_charger_remove,
 	.driver = {
 		.name = "pm2xxx-wall_charger",
-		.pm = PM2XXX_PM_OPS,
+		.pm = IS_ENABLED(CONFIG_PM) ? &pm2xxx_pm_ops : NULL,
 	},
 	.id_table = pm2xxx_id,
 };

drivers/power/power_supply_sysfs.c

@@ -45,7 +45,8 @@ static ssize_t power_supply_show_property(struct device *dev,
 					  char *buf) {
 	static char *type_text[] = {
 		"Unknown", "Battery", "UPS", "Mains", "USB",
-		"USB_DCP", "USB_CDP", "USB_ACA"
+		"USB_DCP", "USB_CDP", "USB_ACA", "USB_C",
+		"USB_PD", "USB_PD_DRP"
 	};
 	static char *status_text[] = {
 		"Unknown", "Charging", "Discharging", "Not charging", "Full"

drivers/power/reset/Kconfig

@@ -148,6 +148,7 @@ config POWER_RESET_KEYSTONE
 config POWER_RESET_SYSCON
 	bool "Generic SYSCON regmap reset driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select MFD_SYSCON
 	help
 	  Reboot support for generic SYSCON mapped register reset.
@@ -155,6 +156,7 @@ config POWER_RESET_SYSCON
 config POWER_RESET_SYSCON_POWEROFF
 	bool "Generic SYSCON regmap poweroff driver"
 	depends on OF
+	depends on HAS_IOMEM
 	select MFD_SYSCON
 	help
 	  Poweroff support for generic SYSCON mapped register poweroff.

drivers/power/reset/arm-versatile-reboot.c

@@ -18,8 +18,8 @@
 #define INTEGRATOR_HDR_LOCK_OFFSET	0x14
 #define INTEGRATOR_CM_CTRL_RESET	(1 << 3)
 
-#define REALVIEW_SYS_LOCK_OFFSET	0x20
-#define REALVIEW_SYS_RESETCTL_OFFSET	0x40
+#define VERSATILE_SYS_LOCK_OFFSET	0x20
+#define VERSATILE_SYS_RESETCTL_OFFSET	0x40
 
 /* Magic unlocking token used on all Versatile boards */
 #define VERSATILE_LOCK_VAL		0xA05F
@@ -29,6 +29,7 @@
  */
 enum versatile_reboot {
 	INTEGRATOR_REBOOT_CM,
+	VERSATILE_REBOOT_CM,
 	REALVIEW_REBOOT_EB,
 	REALVIEW_REBOOT_PB1176,
 	REALVIEW_REBOOT_PB11MP,
@@ -45,6 +46,10 @@ static const struct of_device_id versatile_reboot_of_match[] = {
 		.compatible = "arm,core-module-integrator",
 		.data = (void *)INTEGRATOR_REBOOT_CM
 	},
+	{
+		.compatible = "arm,core-module-versatile",
+		.data = (void *)VERSATILE_REBOOT_CM,
+	},
 	{
 		.compatible = "arm,realview-eb-syscon",
 		.data = (void *)REALVIEW_REBOOT_EB,
@@ -82,33 +87,43 @@ static int versatile_reboot(struct notifier_block *this, unsigned long mode,
 				   INTEGRATOR_CM_CTRL_RESET,
 				   INTEGRATOR_CM_CTRL_RESET);
 		break;
+	case VERSATILE_REBOOT_CM:
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+			     VERSATILE_LOCK_VAL);
+		regmap_update_bits(syscon_regmap,
+				   VERSATILE_SYS_RESETCTL_OFFSET,
+				   0x0107,
+				   0x0105);
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+			     0);
+		break;
 	case REALVIEW_REBOOT_EB:
-		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
 			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap,
-			     REALVIEW_SYS_RESETCTL_OFFSET, 0x0008);
+			     VERSATILE_SYS_RESETCTL_OFFSET, 0x0008);
 		break;
 	case REALVIEW_REBOOT_PB1176:
-		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
 			     VERSATILE_LOCK_VAL);
 		regmap_write(syscon_regmap,
-			     REALVIEW_SYS_RESETCTL_OFFSET, 0x0100);
+			     VERSATILE_SYS_RESETCTL_OFFSET, 0x0100);
 		break;
 	case REALVIEW_REBOOT_PB11MP:
 	case REALVIEW_REBOOT_PBA8:
-		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
 			     VERSATILE_LOCK_VAL);
-		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
 			     0x0000);
-		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
 			     0x0004);
 		break;
 	case REALVIEW_REBOOT_PBX:
-		regmap_write(syscon_regmap, REALVIEW_SYS_LOCK_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
 			     VERSATILE_LOCK_VAL);
-		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
 			     0x00f0);
-		regmap_write(syscon_regmap, REALVIEW_SYS_RESETCTL_OFFSET,
+		regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
 			     0x00f4);
 		break;
 	}

include/linux/power/bq24735-charger.h

@@ -32,6 +32,8 @@ struct bq24735_platform {
 	int status_gpio_active_low;
 	bool status_gpio_valid;
 
+	bool ext_control;
+
 	char **supplied_to;
 	size_t num_supplicants;
 };

include/linux/power_supply.h

@@ -163,6 +163,9 @@ enum power_supply_type {
 	POWER_SUPPLY_TYPE_USB_DCP,	/* Dedicated Charging Port */
 	POWER_SUPPLY_TYPE_USB_CDP,	/* Charging Downstream Port */
 	POWER_SUPPLY_TYPE_USB_ACA,	/* Accessory Charger Adapters */
+	POWER_SUPPLY_TYPE_USB_TYPE_C,	/* Type C Port */
+	POWER_SUPPLY_TYPE_USB_PD,	/* Power Delivery Port */
+	POWER_SUPPLY_TYPE_USB_PD_DRP,	/* PD Dual Role Port */
 };
 
 enum power_supply_notifier_events {