Commit 9f6ad1ce authored by Guenter Roeck's avatar Guenter Roeck

hwmon: (pmbus) Fix LINEAR16 data format

LINEAR16 data format is unsigned, not signed. Impact is that affected
attributes report negative values in the upper half of the supported
value range.
Signed-off-by: default avatarGuenter Roeck <guenter.roeck@ericsson.com>
parent 8677011a
......@@ -359,20 +359,21 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
static int pmbus_reg2data_linear(struct pmbus_data *data,
struct pmbus_sensor *sensor)
{
s16 exponent, mantissa;
s16 exponent;
s32 mantissa;
long val;
if (sensor->class == PSC_VOLTAGE_OUT) {
if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
exponent = data->exponent;
mantissa = (s16) sensor->data;
} else {
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
exponent = (sensor->data >> 11) & 0x001f;
mantissa = sensor->data & 0x07ff;
if (exponent > 0x0f)
exponent |= 0xffe0; /* sign extend exponent */
if (mantissa > 0x03ff)
mantissa |= 0xf800; /* sign extend mantissa */
mantissa |= 0xfffff800; /* sign extend mantissa */
}
val = mantissa;
......@@ -454,19 +455,18 @@ static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
static u16 pmbus_data2reg_linear(struct pmbus_data *data,
enum pmbus_sensor_classes class, long val)
{
s16 exponent = 0, mantissa = 0;
s16 exponent = 0, mantissa;
bool negative = false;
/* simple case */
if (val == 0)
return 0;
if (val < 0) {
negative = true;
val = -val;
}
if (class == PSC_VOLTAGE_OUT) {
/* LINEAR16 does not support negative voltages */
if (val < 0)
return 0;
/*
* For a static exponents, we don't have a choice
* but to adjust the value to it.
......@@ -476,9 +476,12 @@ static u16 pmbus_data2reg_linear(struct pmbus_data *data,
else
val >>= data->exponent;
val = DIV_ROUND_CLOSEST(val, 1000);
if (val > 0x7fff)
val = 0x7fff;
return negative ? -val : val;
return val & 0xffff;
}
if (val < 0) {
negative = true;
val = -val;
}
/* Power is in uW. Convert to mW before converting. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment