Merge ath-current from ath.git

ath.git fixes for 4.8. Major changes:

ath10k

* fix racy rx status retrieval from htt context
* QCA9887 support is not experimental anymore, remove the warning message

ath9k

* fix regression with led GPIOs
* fix AR5416 GPIO access warning

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -1525,7 +1525,7 @@ static void ath10k_htt_rx_h_filter(struct ath10k *ar,
 static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt)
 {
 	struct ath10k *ar = htt->ar;
-	static struct ieee80211_rx_status rx_status;
+	struct ieee80211_rx_status *rx_status = &htt->rx_status;
 	struct sk_buff_head amsdu;
 	int ret;
 
@@ -1549,11 +1549,11 @@ static int ath10k_htt_rx_handle_amsdu(struct ath10k_htt *htt)
 		return ret;
 	}
 
-	ath10k_htt_rx_h_ppdu(ar, &amsdu, &rx_status, 0xffff);
+	ath10k_htt_rx_h_ppdu(ar, &amsdu, rx_status, 0xffff);
 	ath10k_htt_rx_h_unchain(ar, &amsdu, ret > 0);
-	ath10k_htt_rx_h_filter(ar, &amsdu, &rx_status);
-	ath10k_htt_rx_h_mpdu(ar, &amsdu, &rx_status);
-	ath10k_htt_rx_h_deliver(ar, &amsdu, &rx_status);
+	ath10k_htt_rx_h_filter(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_mpdu(ar, &amsdu, rx_status);
+	ath10k_htt_rx_h_deliver(ar, &amsdu, rx_status);
 
 	return 0;
 }

drivers/net/wireless/ath/ath10k/pci.c

@@ -3162,7 +3162,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 		pci_hard_reset = ath10k_pci_qca988x_chip_reset;
 		break;
 	case QCA9887_1_0_DEVICE_ID:
-		dev_warn(&pdev->dev, "QCA9887 support is still experimental, there are likely bugs. You have been warned.\n");
 		hw_rev = ATH10K_HW_QCA9887;
 		pci_ps = false;
 		pci_soft_reset = ath10k_pci_warm_reset;

drivers/net/wireless/ath/ath9k/hw.c

@@ -2482,6 +2482,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		return -EINVAL;
 	}
 
+	ath9k_gpio_cap_init(ah);
+
 	if (AR_SREV_9485(ah) ||
 	    AR_SREV_9285(ah) ||
 	    AR_SREV_9330(ah) ||
@@ -2531,8 +2533,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah)
 	else
 		pCap->hw_caps &= ~ATH9K_HW_CAP_HT;
 
-	ath9k_gpio_cap_init(ah);
-
 	if (AR_SREV_9160_10_OR_LATER(ah) || AR_SREV_9100(ah))
 		pCap->rts_aggr_limit = ATH_AMPDU_LIMIT_MAX;
 	else

drivers/net/wireless/ath/ath9k/main.c

@@ -718,9 +718,12 @@ static int ath9k_start(struct ieee80211_hw *hw)
 	if (!ath_complete_reset(sc, false))
 		ah->reset_power_on = false;
 
-	if (ah->led_pin >= 0)
+	if (ah->led_pin >= 0) {
 		ath9k_hw_set_gpio(ah, ah->led_pin,
 				  (ah->config.led_active_high) ? 1 : 0);
+		ath9k_hw_gpio_request_out(ah, ah->led_pin, NULL,
+					  AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+	}
 
 	/*
 	 * Reset key cache to sane defaults (all entries cleared) instead of
@@ -864,9 +867,11 @@ static void ath9k_stop(struct ieee80211_hw *hw)
 
 	spin_lock_bh(&sc->sc_pcu_lock);
 
-	if (ah->led_pin >= 0)
+	if (ah->led_pin >= 0) {
 		ath9k_hw_set_gpio(ah, ah->led_pin,
 				  (ah->config.led_active_high) ? 0 : 1);
+		ath9k_hw_gpio_request_in(ah, ah->led_pin, NULL);
+	}
 
 	ath_prepare_reset(sc);