ixgbe: Fix led interface for X557 devices

The X557 devices use a different interface to the LED for the port.
This patch reflect that change.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe_type.h

@@ -1830,6 +1830,9 @@ enum {
 #define IXGBE_LED_IVRT(_i)       IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
 #define IXGBE_LED_BLINK(_i)      IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
 #define IXGBE_LED_MODE_MASK(_i)  IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+#define IXGBE_X557_LED_MANUAL_SET_MASK	BIT(8)
+#define IXGBE_X557_MAX_LED_INDEX	3
+#define IXGBE_X557_LED_PROVISIONING	0xC430
 
 /* LED modes */
 #define IXGBE_LED_LINK_UP       0x0

drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

@@ -2114,6 +2114,50 @@ static s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw)
 	return ixgbe_enable_lasi_ext_t_x550em(hw);
 }
 
+/**
+ *  ixgbe_led_on_t_x550em - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @led_idx: led number to turn on
+ **/
+s32 ixgbe_led_on_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+	u16 phy_data;
+
+	if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+		return IXGBE_ERR_PARAM;
+
+	/* To turn on the LED, set mode to ON. */
+	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+	phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK;
+	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_led_off_t_x550em - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @led_idx: led number to turn off
+ **/
+s32 ixgbe_led_off_t_x550em(struct ixgbe_hw *hw, u32 led_idx)
+{
+	u16 phy_data;
+
+	if (led_idx >= IXGBE_X557_MAX_LED_INDEX)
+		return IXGBE_ERR_PARAM;
+
+	/* To turn on the LED, set mode to ON. */
+	hw->phy.ops.read_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data);
+	phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK;
+	hw->phy.ops.write_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx,
+			      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data);
+
+	return 0;
+}
+
 /** ixgbe_get_lcd_x550em - Determine lowest common denominator
  *  @hw: pointer to hardware structure
  *  @lcd_speed: pointer to lowest common link speed
@@ -2853,8 +2897,6 @@ static s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
 	.write_analog_reg8		= NULL, \
 	.set_rxpba			= &ixgbe_set_rxpba_generic, \
 	.check_link			= &ixgbe_check_mac_link_generic, \
-	.led_on				= &ixgbe_led_on_generic, \
-	.led_off			= &ixgbe_led_off_generic, \
 	.blink_led_start		= &ixgbe_blink_led_start_X540, \
 	.blink_led_stop			= &ixgbe_blink_led_stop_X540, \
 	.set_rar			= &ixgbe_set_rar_generic, \
@@ -2886,6 +2928,8 @@ static s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr,
 
 static const struct ixgbe_mac_operations mac_ops_X550 = {
 	X550_COMMON_MAC
+	.led_on			= ixgbe_led_on_generic,
+	.led_off		= ixgbe_led_off_generic,
 	.reset_hw		= &ixgbe_reset_hw_X540,
 	.get_media_type		= &ixgbe_get_media_type_X540,
 	.get_san_mac_addr	= &ixgbe_get_san_mac_addr_generic,
@@ -2904,6 +2948,8 @@ static const struct ixgbe_mac_operations mac_ops_X550 = {
 
 static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
 	X550_COMMON_MAC
+	.led_on			= ixgbe_led_on_t_x550em,
+	.led_off		= ixgbe_led_off_t_x550em,
 	.reset_hw		= &ixgbe_reset_hw_X550em,
 	.get_media_type		= &ixgbe_get_media_type_X550em,
 	.get_san_mac_addr	= NULL,
@@ -2922,6 +2968,8 @@ static const struct ixgbe_mac_operations mac_ops_X550EM_x = {
 
 static struct ixgbe_mac_operations mac_ops_x550em_a = {
 	X550_COMMON_MAC
+	.led_on			= ixgbe_led_on_t_x550em,
+	.led_off		= ixgbe_led_off_t_x550em,
 	.reset_hw		= ixgbe_reset_hw_X550em,
 	.get_media_type		= ixgbe_get_media_type_X550em,
 	.get_san_mac_addr	= NULL,