arm64: dts: stratix10: Support Ethernet Jumbo frame

Properly specify the RX and TX FIFO size which is important
for Jumbo frames.
Update the max-frame-size to support Jumbo frames.
Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi

@@ -137,6 +137,8 @@ gmac0: ethernet@ff800000 {
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC0_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
 			status = "disabled";
 		};
 
@@ -150,6 +152,8 @@ gmac1: ethernet@ff802000 {
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC1_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
 			status = "disabled";
 		};
 
@@ -163,6 +167,8 @@ gmac2: ethernet@ff804000 {
 			reset-names = "stmmaceth", "stmmaceth-ocp";
 			clocks = <&clkmgr STRATIX10_EMAC2_CLK>;
 			clock-names = "stmmaceth";
+			tx-fifo-depth = <16384>;
+			rx-fifo-depth = <16384>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts

@@ -76,7 +76,7 @@ &gmac0 {
 	phy-mode = "rgmii";
 	phy-handle = <&phy0>;
 
-	max-frame-size = <3800>;
+	max-frame-size = <9000>;
 
 	mdio0 {
 		#address-cells = <1>;