Skip to content

L
linux
Commit a3800d8f authored by Kumar Gala's avatar Kumar Gala Committed by Linus Torvalds
Browse files
Options

[PATCH] ppc32: Remove board support for ADIR 

Support for the ADIR board is no longer maintained and thus being removed
Signed-off-by: default avatarKumar Gala <kumar.gala@freescale.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 4b4dc822
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 1493 deletions
arch/ppc/Kconfig
View file @ a3800d8f
......@@ -637,9 +637,6 @@ config SANDPOINT
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
config ADIR
bool "SBS-Adirondack"
config K2
bool "SBS-K2"
......
arch/ppc/configs/adir_defconfig deleted 100644 → 0
View file @ 4b4dc822
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_EMBEDDED is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_POWER3 is not set
# CONFIG_8xx is not set
#
# IBM 4xx options
#
# CONFIG_8260 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
# CONFIG_WILLOW_2 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
# CONFIG_SPRUCE is not set
# CONFIG_LOPEC is not set
# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
CONFIG_ADIR=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_OTHER is not set
CONFIG_PARPORT_1284=y
# CONFIG_PPC601_SYNC_FIX is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_REPORT_LUNS is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C7xx is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
CONFIG_SCSI_NCR53C8XX=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_OAKNET is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Userland interfaces
#
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_BLUETOOTH_TTY is not set
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
#
# Input core support is needed for USB HID input layer or HIDBP support
#
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_VISOR=m
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
arch/ppc/platforms/Makefile
View file @ a3800d8f
......@@ -21,7 +21,6 @@ obj-$(CONFIG_CPU_FREQ_PMAC) += pmac_cpufreq.o
endif
obj-$(CONFIG_PMAC_BACKLIGHT) += pmac_backlight.o
obj-$(CONFIG_PREP_RESIDUAL) += residual.o
obj-$(CONFIG_ADIR) += adir_setup.o adir_pic.o adir_pci.o
obj-$(CONFIG_PQ2ADS) += pq2ads.o
obj-$(CONFIG_TQM8260) += tqm8260_setup.o
obj-$(CONFIG_CPCI690) += cpci690.o
......
arch/ppc/platforms/adir.h deleted 100644 → 0
View file @ 4b4dc822
/*
* arch/ppc/platforms/adir.h
*
* Definitions for SBS Adirondack board support
*
* By Michael Sokolov <msokolov@ivan.Harhan.ORG>
*/
#ifndef __PPC_PLATFORMS_ADIR_H
#define __PPC_PLATFORMS_ADIR_H
/*
* SBS Adirondack definitions
*/
/* PPC physical address space layout. We use the one set up by the firmware. */
#define ADIR_PCI32_MEM_BASE 0x80000000
#define ADIR_PCI32_MEM_SIZE 0x20000000
#define ADIR_PCI64_MEM_BASE 0xA0000000
#define ADIR_PCI64_MEM_SIZE 0x20000000
#define ADIR_PCI32_IO_BASE 0xC0000000
#define ADIR_PCI32_IO_SIZE 0x10000000
#define ADIR_PCI64_IO_BASE 0xD0000000
#define ADIR_PCI64_IO_SIZE 0x10000000
#define ADIR_PCI64_PHB 0xFF400000
#define ADIR_PCI32_PHB 0xFF500000
#define ADIR_PCI64_CONFIG_ADDR (ADIR_PCI64_PHB + 0x000f8000)
#define ADIR_PCI64_CONFIG_DATA (ADIR_PCI64_PHB + 0x000f8010)
#define ADIR_PCI32_CONFIG_ADDR (ADIR_PCI32_PHB + 0x000f8000)
#define ADIR_PCI32_CONFIG_DATA (ADIR_PCI32_PHB + 0x000f8010)
/* System memory as seen from PCI */
#define ADIR_PCI_SYS_MEM_BASE 0x80000000
/* Static virtual mapping of PCI I/O */
#define ADIR_PCI32_VIRT_IO_BASE 0xFE000000
#define ADIR_PCI32_VIRT_IO_SIZE 0x01000000
#define ADIR_PCI64_VIRT_IO_BASE 0xFF000000
#define ADIR_PCI64_VIRT_IO_SIZE 0x01000000
/* Registers */
#define ADIR_NVRAM_RTC_ADDR 0x74
#define ADIR_NVRAM_RTC_DATA 0x75
#define ADIR_BOARD_ID_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF0)
#define ADIR_CPLD1REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF1)
#define ADIR_CPLD2REV_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF2)
#define ADIR_FLASHCTL_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF3)
#define ADIR_CPC710_STAT_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF4)
#define ADIR_CLOCK_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF5)
#define ADIR_GPIO_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF8)
#define ADIR_MISC_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFF9)
#define ADIR_LED_REG (ADIR_PCI32_VIRT_IO_BASE + 0x08FFFA)
#define ADIR_CLOCK_REG_PD 0x10
#define ADIR_CLOCK_REG_SPREAD 0x08
#define ADIR_CLOCK_REG_SEL133 0x04
#define ADIR_CLOCK_REG_SEL1 0x02
#define ADIR_CLOCK_REG_SEL0 0x01
#define ADIR_PROCA_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF0)
#define ADIR_PROCB_INT_MASK (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF2)
#define ADIR_PROCA_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF4)
#define ADIR_PROCB_INT_STAT (ADIR_PCI32_VIRT_IO_BASE + 0x0EFFF6)
/* Linux IRQ numbers */
#define ADIR_IRQ_NONE -1
#define ADIR_IRQ_SERIAL2 3
#define ADIR_IRQ_SERIAL1 4
#define ADIR_IRQ_FDC 6
#define ADIR_IRQ_PARALLEL 7
#define ADIR_IRQ_VIA_AUDIO 10
#define ADIR_IRQ_VIA_USB 11
#define ADIR_IRQ_IDE0 14
#define ADIR_IRQ_IDE1 15
#define ADIR_IRQ_PCI0_INTA 16
#define ADIR_IRQ_PCI0_INTB 17
#define ADIR_IRQ_PCI0_INTC 18
#define ADIR_IRQ_PCI0_INTD 19
#define ADIR_IRQ_PCI1_INTA 20
#define ADIR_IRQ_PCI1_INTB 21
#define ADIR_IRQ_PCI1_INTC 22
#define ADIR_IRQ_PCI1_INTD 23
#define ADIR_IRQ_MBSCSI 24 /* motherboard SCSI */
#define ADIR_IRQ_MBETH1 25 /* motherboard Ethernet 1 */
#define ADIR_IRQ_MBETH0 26 /* motherboard Ethernet 0 */
#define ADIR_IRQ_CPC710_INT1 27
#define ADIR_IRQ_CPC710_INT2 28
#define ADIR_IRQ_VT82C686_NMI 29
#define ADIR_IRQ_VT82C686_INTR 30
#define ADIR_IRQ_INTERPROC 31
#endif /* __PPC_PLATFORMS_ADIR_H */
arch/ppc/platforms/adir_pci.c deleted 100644 → 0
View file @ 4b4dc822
/*
* arch/ppc/platforms/adir_pci.c
*
* PCI support for SBS Adirondack
*
* By Michael Sokolov <msokolov@ivan.Harhan.ORG>
* based on the K2 version by Matt Porter <mporter@mvista.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <syslib/cpc710.h>
#include "adir.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif /* DEBUG */
static inline int __init
adir_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
#define PCIIRQ(a,b,c,d) {ADIR_IRQ_##a,ADIR_IRQ_##b,ADIR_IRQ_##c,ADIR_IRQ_##d},
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
/*
* The three PCI devices on the motherboard have dedicated lines to the
* CPLD interrupt controller, bypassing the standard PCI INTA-D and the
* PC interrupt controller. All other PCI devices (slots) have usual
* staggered INTA-D lines, resulting in 8 lines total (PCI0 INTA-D and
* PCI1 INTA-D). All 8 go to the CPLD interrupt controller. PCI0 INTA-D
* also go to the south bridge, so we have the option of taking them
* via the CPLD interrupt controller or via the south bridge 8259
* 8258 thingy. PCI1 INTA-D can only be taken via the CPLD interrupt
* controller. We take all PCI interrupts via the CPLD interrupt
* controller as recommended by SBS.
*
* We also have some monkey business with the PCI devices within the
* VT82C686B south bridge itself. This chip actually has 7 functions on
* its IDSEL. Function 0 is the actual south bridge, function 1 is IDE,
* and function 4 is some special stuff. The other 4 functions are just
* regular PCI devices bundled in the chip. 2 and 3 are USB UHCIs and 5
* and 6 are audio (not supported on the Adirondack).
*
* This is where the monkey business begins. PCI devices are supposed
* to signal normal PCI interrupts. But the 4 functions in question are
* located in the south bridge chip, which is designed with the
* assumption that it will be fielding PCI INTA-D interrupts rather
* than generating them. Here's what it does. Each of the functions in
* question routes its interrupt to one of the IRQs on the 8259 thingy.
* Which one? It looks at the Interrupt Line register in the PCI config
* space, even though the PCI spec says it's for BIOS/OS interaction
* only.
*
* How do we deal with this? We take these interrupts via 8259 IRQs as
* we have to. We return the desired IRQ numbers from this routine when
* called for the functions in question. The PCI scan code will then
* stick our return value into the Interrupt Line register in the PCI
* config space, and the interrupt will actually go there. We identify
* these functions within the south bridge IDSEL by their interrupt pin
* numbers, as the VT82C686B has 04 in the Interrupt Pin register for
* USB and 03 for audio.
*/
if (!hose->index) {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
/* south bridge */ PCIIRQ(IDE0, NONE, VIA_AUDIO, VIA_USB)
/* Ethernet 0 */ PCIIRQ(MBETH0, MBETH0, MBETH0, MBETH0)
/* PCI0 slot 1 */ PCIIRQ(PCI0_INTB, PCI0_INTC, PCI0_INTD, PCI0_INTA)
/* PCI0 slot 2 */ PCIIRQ(PCI0_INTC, PCI0_INTD, PCI0_INTA, PCI0_INTB)
/* PCI0 slot 3 */ PCIIRQ(PCI0_INTD, PCI0_INTA, PCI0_INTB, PCI0_INTC)
};
const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
} else {
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
/* Ethernet 1 */ PCIIRQ(MBETH1, MBETH1, MBETH1, MBETH1)
/* SCSI */ PCIIRQ(MBSCSI, MBSCSI, MBSCSI, MBSCSI)
/* PCI1 slot 1 */ PCIIRQ(PCI1_INTB, PCI1_INTC, PCI1_INTD, PCI1_INTA)
/* PCI1 slot 2 */ PCIIRQ(PCI1_INTC, PCI1_INTD, PCI1_INTA, PCI1_INTB)
/* PCI1 slot 3 */ PCIIRQ(PCI1_INTD, PCI1_INTA, PCI1_INTB, PCI1_INTC)
};
const long min_idsel = 3, max_idsel = 7, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
#undef PCIIRQ
}
static void
adir_pcibios_fixup_resources(struct pci_dev *dev)
{
int i;
if ((dev->vendor == PCI_VENDOR_ID_IBM) &&
(dev->device == PCI_DEVICE_ID_IBM_CPC710_PCI64))
{
DBG("Fixup CPC710 resources\n");
for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
{
dev->resource[i].start = 0;
dev->resource[i].end = 0;
}
}
}
/*
* CPC710 DD3 has an errata causing it to hang the system if a type 0 config
* cycle is attempted on its PCI32 interface with a device number > 21.
* CPC710's PCI bridges map device numbers 1 through 21 to AD11 through AD31.
* Per the PCI spec it MUST accept all other device numbers and do nothing, and
* software MUST scan all device numbers without assuming how IDSELs are
* mapped. However, as the CPC710 DD3's errata causes such correct scanning
* procedure to hang the system, we have no choice but to introduce this hack
* of knowingly avoiding device numbers > 21 on PCI0,
*/
static int
adir_exclude_device(u_char bus, u_char devfn)
{
if ((bus == 0) && (PCI_SLOT(devfn) > 21))
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
void adir_find_bridges(void)
{
struct pci_controller *hose_a, *hose_b;
/* Setup PCI32 hose */
hose_a = pcibios_alloc_controller();
if (!hose_a)
return;
hose_a->first_busno = 0;
hose_a->last_busno = 0xff;
hose_a->pci_mem_offset = ADIR_PCI32_MEM_BASE;
hose_a->io_space.start = 0;
hose_a->io_space.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
hose_a->mem_space.start = 0;
hose_a->mem_space.end = ADIR_PCI32_MEM_SIZE - 1;
hose_a->io_resource.start = 0;
hose_a->io_resource.end = ADIR_PCI32_VIRT_IO_SIZE - 1;
hose_a->io_resource.flags = IORESOURCE_IO;
hose_a->mem_resources[0].start = ADIR_PCI32_MEM_BASE;
hose_a->mem_resources[0].end = ADIR_PCI32_MEM_BASE +
ADIR_PCI32_MEM_SIZE - 1;
hose_a->mem_resources[0].flags = IORESOURCE_MEM;
hose_a->io_base_phys = ADIR_PCI32_IO_BASE;
hose_a->io_base_virt = (void *) ADIR_PCI32_VIRT_IO_BASE;
ppc_md.pci_exclude_device = adir_exclude_device;
setup_indirect_pci(hose_a, ADIR_PCI32_CONFIG_ADDR,
ADIR_PCI32_CONFIG_DATA);
/* Initialize PCI32 bus registers */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_BUS_NUMBER,
hose_a->first_busno);
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER,
hose_a->last_busno);
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
/* Write out correct max subordinate bus number for hose A */
early_write_config_byte(hose_a,
hose_a->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER,
hose_a->last_busno);
/* Setup PCI64 hose */
hose_b = pcibios_alloc_controller();
if (!hose_b)
return;
hose_b->first_busno = hose_a->last_busno + 1;
hose_b->last_busno = 0xff;
hose_b->pci_mem_offset = ADIR_PCI64_MEM_BASE;
hose_b->io_space.start = 0;
hose_b->io_space.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
hose_b->mem_space.start = 0;
hose_b->mem_space.end = ADIR_PCI64_MEM_SIZE - 1;
hose_b->io_resource.start = 0;
hose_b->io_resource.end = ADIR_PCI64_VIRT_IO_SIZE - 1;
hose_b->io_resource.flags = IORESOURCE_IO;
hose_b->mem_resources[0].start = ADIR_PCI64_MEM_BASE;
hose_b->mem_resources[0].end = ADIR_PCI64_MEM_BASE +
ADIR_PCI64_MEM_SIZE - 1;
hose_b->mem_resources[0].flags = IORESOURCE_MEM;
hose_b->io_base_phys = ADIR_PCI64_IO_BASE;
hose_b->io_base_virt = (void *) ADIR_PCI64_VIRT_IO_BASE;
setup_indirect_pci(hose_b, ADIR_PCI64_CONFIG_ADDR,
ADIR_PCI64_CONFIG_DATA);
/* Initialize PCI64 bus registers */
early_write_config_byte(hose_b,
0,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER,
0xff);
early_write_config_byte(hose_b,
0,
PCI_DEVFN(0, 0),
CPC710_BUS_NUMBER,
hose_b->first_busno);
hose_b->last_busno = pciauto_bus_scan(hose_b,
hose_b->first_busno);
/* Write out correct max subordinate bus number for hose B */
early_write_config_byte(hose_b,
hose_b->first_busno,
PCI_DEVFN(0, 0),
CPC710_SUB_BUS_NUMBER,
hose_b->last_busno);
ppc_md.pcibios_fixup = NULL;
ppc_md.pcibios_fixup_resources = adir_pcibios_fixup_resources;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = adir_map_irq;
}
arch/ppc/platforms/adir_pic.c deleted 100644 → 0
View file @ 4b4dc822
/*
* arch/ppc/platforms/adir_pic.c
*
* Interrupt controller support for SBS Adirondack
*
* By Michael Sokolov <msokolov@ivan.Harhan.ORG>
* based on the K2 and SCM versions by Matt Porter <mporter@mvista.com>
*/
#include <linux/stddef.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include "adir.h"
static void adir_onboard_pic_enable(unsigned int irq);
static void adir_onboard_pic_disable(unsigned int irq);
__init static void
adir_onboard_pic_init(void)
{
volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
/* Disable all Adirondack onboard interrupts */
out_be16(maskreg, 0xFFFF);
}
static int
adir_onboard_pic_get_irq(void)
{
volatile u_short *statreg = (volatile u_short *) ADIR_PROCA_INT_STAT;
int irq;
u_short int_status, int_test;
int_status = in_be16(statreg);
for (irq = 0, int_test = 1; irq < 16; irq++, int_test <<= 1) {
if (int_status & int_test)
break;
}
if (irq == 16)
return -1;
return (irq+16);
}
static void
adir_onboard_pic_enable(unsigned int irq)
{
volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
/* Change irq to Adirondack onboard native value */
irq -= 16;
/* Enable requested irq number */
out_be16(maskreg, in_be16(maskreg) & ~(1 << irq));
}
static void
adir_onboard_pic_disable(unsigned int irq)
{
volatile u_short *maskreg = (volatile u_short *) ADIR_PROCA_INT_MASK;
/* Change irq to Adirondack onboard native value */
irq -= 16;
/* Disable requested irq number */
out_be16(maskreg, in_be16(maskreg) | (1 << irq));
}
static struct hw_interrupt_type adir_onboard_pic = {
" ADIR PIC ",
NULL,
NULL,
adir_onboard_pic_enable, /* unmask */
adir_onboard_pic_disable, /* mask */
adir_onboard_pic_disable, /* mask and ack */
NULL,
NULL
};
static struct irqaction noop_action = {
.handler = no_action,
.flags = SA_INTERRUPT,
.mask = CPU_MASK_NONE,
.name = "82c59 primary cascade",
};
/*
* Linux interrupt values are assigned as follows:
*
* 0-15 VT82C686 8259 interrupts
* 16-31 Adirondack CPLD interrupts
*/
__init void
adir_init_IRQ(void)
{
int i;
/* Initialize the cascaded 8259's on the VT82C686 */
for (i=0; i<16; i++)
irq_desc[i].handler = &i8259_pic;
i8259_init(NULL);
/* Initialize Adirondack CPLD PIC and enable 8259 interrupt cascade */
for (i=16; i<32; i++)
irq_desc[i].handler = &adir_onboard_pic;
adir_onboard_pic_init();
/* Enable 8259 interrupt cascade */
setup_irq(ADIR_IRQ_VT82C686_INTR, &noop_action);
}
int
adir_get_irq(struct pt_regs *regs)
{
int irq;
if ((irq = adir_onboard_pic_get_irq()) < 0)
return irq;
if (irq == ADIR_IRQ_VT82C686_INTR)
irq = i8259_irq(regs);
return irq;
}
arch/ppc/platforms/adir_setup.c deleted 100644 → 0
View file @ 4b4dc822
/*
* arch/ppc/platforms/adir_setup.c
*
* Board setup routines for SBS Adirondack
*
* By Michael Sokolov <msokolov@ivan.Harhan.ORG>
* based on the K2 version by Matt Porter <mporter@mvista.com>
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include "adir.h"
extern void adir_init_IRQ(void);
extern int adir_get_irq(struct pt_regs *);
extern void adir_find_bridges(void);
extern unsigned long loops_per_jiffy;
static unsigned int cpu_750cx[16] = {
5, 15, 14, 0, 4, 13, 0, 9, 6, 11, 8, 10, 16, 12, 7, 0
};
static int
adir_get_bus_speed(void)
{
if (!(*((u_char *) ADIR_CLOCK_REG) & ADIR_CLOCK_REG_SEL133))
return 100000000;
else
return 133333333;
}
static int
adir_get_cpu_speed(void)
{
unsigned long hid1;
int cpu_speed;
hid1 = mfspr(SPRN_HID1) >> 28;
hid1 = cpu_750cx[hid1];
cpu_speed = adir_get_bus_speed()*hid1/2;
return cpu_speed;
}
static void __init
adir_calibrate_decr(void)
{
int freq, divisor = 4;
/* determine processor bus speed */
freq = adir_get_bus_speed();
tb_ticks_per_jiffy = freq / HZ / divisor;
tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
}
static int
adir_show_cpuinfo(struct seq_file *m)
{
seq_printf(m, "vendor\t\t: SBS\n");
seq_printf(m, "machine\t\t: Adirondack\n");
seq_printf(m, "cpu speed\t: %dMhz\n", adir_get_cpu_speed()/1000000);
seq_printf(m, "bus speed\t: %dMhz\n", adir_get_bus_speed()/1000000);
seq_printf(m, "memory type\t: SDRAM\n");
return 0;
}
extern char cmd_line[];
TODC_ALLOC();
static void __init
adir_setup_arch(void)
{
unsigned int cpu;
/* Setup TODC access */
TODC_INIT(TODC_TYPE_MC146818, ADIR_NVRAM_RTC_ADDR, 0,
ADIR_NVRAM_RTC_DATA, 8);
/* init to some ~sane value until calibrate_delay() runs */
loops_per_jiffy = 50000000/HZ;
/* Setup PCI host bridges */
adir_find_bridges();
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_SDA1;
#endif
/* Identify the system */
printk("System Identification: SBS Adirondack - PowerPC 750CXe @ %d Mhz\n", adir_get_cpu_speed()/1000000);
printk("SBS Adirondack port (C) 2001 SBS Technologies, Inc.\n");
/* Identify the CPU manufacturer */
cpu = mfspr(SPRN_PVR);
printk("CPU manufacturer: IBM [rev=%04x]\n", (cpu & 0xffff));
}
static void
adir_restart(char *cmd)
{
local_irq_disable();
/* SRR0 has system reset vector, SRR1 has default MSR value */
/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
__asm__ __volatile__
("lis 3,0xfff0\n\t"
"ori 3,3,0x0100\n\t"
"mtspr 26,3\n\t"
"li 3,0\n\t"
"mtspr 27,3\n\t"
"rfi\n\t");
for(;;);
}
static void
adir_power_off(void)
{
for(;;);
}
static void
adir_halt(void)
{
adir_restart(NULL);
}
static unsigned long __init
adir_find_end_of_memory(void)
{
return boot_mem_size;
}
static void __init
adir_map_io(void)
{
io_block_mapping(ADIR_PCI32_VIRT_IO_BASE, ADIR_PCI32_IO_BASE,
ADIR_PCI32_VIRT_IO_SIZE, _PAGE_IO);
io_block_mapping(ADIR_PCI64_VIRT_IO_BASE, ADIR_PCI64_IO_BASE,
ADIR_PCI64_VIRT_IO_SIZE, _PAGE_IO);
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
/*
* On the Adirondack we use bi_recs and pass the pointer to them in R3.
*/
parse_bootinfo((struct bi_record *) (r3 + KERNELBASE));
/* Remember, isa_io_base is virtual but isa_mem_base is physical! */
isa_io_base = ADIR_PCI32_VIRT_IO_BASE;
isa_mem_base = ADIR_PCI32_MEM_BASE;
pci_dram_offset = ADIR_PCI_SYS_MEM_BASE;
ppc_md.setup_arch = adir_setup_arch;
ppc_md.show_cpuinfo = adir_show_cpuinfo;
ppc_md.irq_canonicalize = NULL;
ppc_md.init_IRQ = adir_init_IRQ;
ppc_md.get_irq = adir_get_irq;
ppc_md.init = NULL;
ppc_md.find_end_of_memory = adir_find_end_of_memory;
ppc_md.setup_io_mappings = adir_map_io;
ppc_md.restart = adir_restart;
ppc_md.power_off = adir_power_off;
ppc_md.halt = adir_halt;
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_mc146818_read_val;
ppc_md.nvram_write_val = todc_mc146818_write_val;
ppc_md.calibrate_decr = adir_calibrate_decr;
}
arch/ppc/syslib/Makefile
View file @ a3800d8f
......@@ -43,8 +43,6 @@ obj-$(CONFIG_PPC_PMAC) += open_pic.o indirect_pci.o
obj-$(CONFIG_POWER4) += open_pic2.o
obj-$(CONFIG_PPC_CHRP) += open_pic.o indirect_pci.o i8259.o
obj-$(CONFIG_PPC_PREP) += open_pic.o indirect_pci.o i8259.o todc_time.o
obj-$(CONFIG_ADIR) += i8259.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_BAMBOO) += indirect_pci.o pci_auto.o todc_time.o
obj-$(CONFIG_CPCI690) += todc_time.o pci_auto.o
obj-$(CONFIG_EBONY) += indirect_pci.o pci_auto.o todc_time.o
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7