Merge tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management and ACPI fixes from Rafael Wysocki:
 "These fix one recent regression (cpufreq core), fix up two features
  added recently (ACPI CPPC support, SCPI support in the arm_big_little
  cpufreq driver) and fix three older bugs in the intel_pstate driver.

  Specifics:

   - Fix a recent regression in the cpufreq core causing it to fail to
     clean up sysfs directories properly on cpufreq driver removal
     (Viresh Kumar).

   - Fix a build problem in the SCPI support code recently added to the
     arm_big_little cpufreq driver (Punit Agrawal).

   - Fix up the recently added CPPC cpufreq frontend to process the CPU
     coordination information provided by the platform firmware
     correctly (Ashwin Chaugule).

   - Fix the intel_pstate driver to behave as intended when switched
     over to the "performance" mode via sysfs if hardware-driven P-state
     selection (HWP) is enabled (Alexandra Yates).

   - Fix two rounding errors in the intel_pstate driver that sometimes
     cause it to use lower P-states than requested (Prarit Bhargava)"

* tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_pstate: Fix "performance" mode behavior with HWP enabled
  cpufreq: SCPI: Depend on SCPI clk driver
  cpufreq: intel_pstate: Fix limits->max_perf rounding error
  cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error
  cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev()
  cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly

drivers/cpufreq/Kconfig.arm

@@ -202,7 +202,7 @@ config ARM_SA1110_CPUFREQ
 
 config ARM_SCPI_CPUFREQ
         tristate "SCPI based CPUfreq driver"
-	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL
+	depends on ARM_BIG_LITTLE_CPUFREQ && ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
         help
 	  This adds the CPUfreq driver support for ARM big.LITTLE platforms
 	  using SCPI protocol for CPU power management.

drivers/cpufreq/cppc_cpufreq.c

@@ -98,10 +98,11 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->max = cpu->perf_caps.highest_perf;
 	policy->cpuinfo.min_freq = policy->min;
 	policy->cpuinfo.max_freq = policy->max;
+	policy->shared_type = cpu->shared_type;
 
 	if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
 		cpumask_copy(policy->cpus, cpu->shared_cpu_map);
-	else {
+	else if (policy->shared_type == CPUFREQ_SHARED_TYPE_ALL) {
 		/* Support only SW_ANY for now. */
 		pr_debug("Unsupported CPU co-ord type\n");
 		return -EFAULT;

drivers/cpufreq/cpufreq.c

@@ -1401,13 +1401,10 @@ static void cpufreq_remove_dev(struct device *dev, struct subsys_interface *sif)
 	}
 
 	cpumask_clear_cpu(cpu, policy->real_cpus);
+	remove_cpu_dev_symlink(policy, cpu);
 
-	if (cpumask_empty(policy->real_cpus)) {
+	if (cpumask_empty(policy->real_cpus))
 		cpufreq_policy_free(policy, true);
-		return;
-	}
-
-	remove_cpu_dev_symlink(policy, cpu);
 }
 
 static void handle_update(struct work_struct *work)

drivers/cpufreq/intel_pstate.c

@@ -1101,6 +1101,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 	    policy->max >= policy->cpuinfo.max_freq) {
 		pr_debug("intel_pstate: set performance\n");
 		limits = &performance_limits;
+		if (hwp_active)
+			intel_pstate_hwp_set();
 		return 0;
 	}
 
@@ -1108,7 +1110,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 	limits = &powersave_limits;
 	limits->min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
 	limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, 0 , 100);
-	limits->max_policy_pct = (policy->max * 100) / policy->cpuinfo.max_freq;
+	limits->max_policy_pct = DIV_ROUND_UP(policy->max * 100,
+					      policy->cpuinfo.max_freq);
 	limits->max_policy_pct = clamp_t(int, limits->max_policy_pct, 0 , 100);
 
 	/* Normalize user input to [min_policy_pct, max_policy_pct] */
@@ -1120,6 +1123,7 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 				   limits->max_sysfs_pct);
 	limits->max_perf_pct = max(limits->min_policy_pct,
 				   limits->max_perf_pct);
+	limits->max_perf = round_up(limits->max_perf, 8);
 
 	/* Make sure min_perf_pct <= max_perf_pct */
 	limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);