Commit a4188ba8 authored by Jeff Garzik's avatar Jeff Garzik

Merge mandrakesoft.com:/home/jgarzik/vanilla/linus-2.5

into mandrakesoft.com:/home/jgarzik/repo/net-drivers-2.5
parents ace5d474 21d5fc57
...@@ -128,12 +128,7 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ...@@ -128,12 +128,7 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#define E100_DEFAULT_TCB MAX_TCB #define E100_DEFAULT_TCB MAX_TCB
#define E100_MIN_TCB 2*TX_FRAME_CNT + 3 /* make room for at least 2 interrupts */ #define E100_MIN_TCB 2*TX_FRAME_CNT + 3 /* make room for at least 2 interrupts */
#ifdef __ia64__
/* We can't use too many DMAble buffers on IA64 machines with >4 GB mem */
#define E100_MAX_TCB 64
#else
#define E100_MAX_TCB 1024 #define E100_MAX_TCB 1024
#endif /* __ia64__ */
#define E100_DEFAULT_RFD MAX_RFD #define E100_DEFAULT_RFD MAX_RFD
#define E100_MIN_RFD 8 #define E100_MIN_RFD 8
...@@ -766,6 +761,8 @@ typedef enum _non_tx_cmd_state_t { ...@@ -766,6 +761,8 @@ typedef enum _non_tx_cmd_state_t {
#define IPCB_INSERTVLAN_ENABLE BIT_1 #define IPCB_INSERTVLAN_ENABLE BIT_1
#define IPCB_IP_ACTIVATION_DEFAULT IPCB_HARDWAREPARSING_ENABLE #define IPCB_IP_ACTIVATION_DEFAULT IPCB_HARDWAREPARSING_ENABLE
#define FOLD_CSUM(_XSUM) ((((_XSUM << 16) | (_XSUM >> 16)) + _XSUM) >> 16)
/* Transmit Buffer Descriptor (TBD)*/ /* Transmit Buffer Descriptor (TBD)*/
typedef struct _tbd_t { typedef struct _tbd_t {
u32 tbd_buf_addr; /* Physical Transmit Buffer Address */ u32 tbd_buf_addr; /* Physical Transmit Buffer Address */
...@@ -1008,6 +1005,11 @@ struct e100_private { ...@@ -1008,6 +1005,11 @@ struct e100_private {
u32 wolopts; u32 wolopts;
u16 ip_lbytes; u16 ip_lbytes;
#endif #endif
#ifdef CONFIG_PM
u32 pci_state[16];
#endif
}; };
#define E100_AUTONEG 0 #define E100_AUTONEG 0
...@@ -1030,4 +1032,9 @@ extern unsigned char e100_selftest(struct e100_private *bdp, u32 *st_timeout, ...@@ -1030,4 +1032,9 @@ extern unsigned char e100_selftest(struct e100_private *bdp, u32 *st_timeout,
extern unsigned char e100_get_link_state(struct e100_private *bdp); extern unsigned char e100_get_link_state(struct e100_private *bdp);
extern unsigned char e100_wait_scb(struct e100_private *bdp); extern unsigned char e100_wait_scb(struct e100_private *bdp);
extern void e100_deisolate_driver(struct e100_private *bdp,
u8 recover, u8 full_reset);
extern unsigned char e100_hw_reset_recover(struct e100_private *bdp,
u32 reset_cmd);
#endif #endif
...@@ -69,6 +69,10 @@ ANY LOSS OF USE; DATA, OR PROFITS; OR BUSINESS INTERUPTION) HOWEVER CAUSED ...@@ -69,6 +69,10 @@ ANY LOSS OF USE; DATA, OR PROFITS; OR BUSINESS INTERUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
Portions (C) 2002 Red Hat, Inc. under the terms of the GNU GPL v2.
*******************************************************************************/ *******************************************************************************/
/********************************************************************** /**********************************************************************
...@@ -152,7 +156,7 @@ eeprom_set_semaphore(struct e100_private *adapter) ...@@ -152,7 +156,7 @@ eeprom_set_semaphore(struct e100_private *adapter)
} }
set_current_state(TASK_UNINTERRUPTIBLE); set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1); schedule_timeout(1+(HZ-1)/100);
} }
return false; return false;
} }
...@@ -252,19 +256,12 @@ e100_eeprom_size(struct e100_private *adapter) ...@@ -252,19 +256,12 @@ e100_eeprom_size(struct e100_private *adapter)
// Returns: bits in an address for that size eeprom // Returns: bits in an address for that size eeprom
//---------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------
static u16 static inline int
eeprom_address_size(u16 size) eeprom_address_size(u16 size)
{ {
switch (size) { int isize = size;
case 64:
return 6; return ffs(isize);
case 128:
return 7;
case 256:
return 8;
}
return 0; //fix compiler warning or error!
} }
//---------------------------------------------------------------------------------------- //----------------------------------------------------------------------------------------
...@@ -348,6 +345,7 @@ shift_out_bits(struct e100_private *adapter, u16 data, u16 count) ...@@ -348,6 +345,7 @@ shift_out_bits(struct e100_private *adapter, u16 data, u16 count)
x |= EEDI; x |= EEDI;
writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter));
readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
raise_clock(adapter, &x); raise_clock(adapter, &x);
lower_clock(adapter, &x); lower_clock(adapter, &x);
...@@ -374,6 +372,7 @@ raise_clock(struct e100_private *adapter, u16 *x) ...@@ -374,6 +372,7 @@ raise_clock(struct e100_private *adapter, u16 *x)
{ {
*x = *x | EESK; *x = *x | EESK;
writew(*x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(*x, &CSR_EEPROM_CONTROL_FIELD(adapter));
readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
} }
...@@ -393,6 +392,7 @@ lower_clock(struct e100_private *adapter, u16 *x) ...@@ -393,6 +392,7 @@ lower_clock(struct e100_private *adapter, u16 *x)
{ {
*x = *x & ~EESK; *x = *x & ~EESK;
writew(*x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(*x, &CSR_EEPROM_CONTROL_FIELD(adapter));
readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
} }
...@@ -498,7 +498,7 @@ e100_eeprom_write_word(struct e100_private *adapter, u16 reg, u16 data) ...@@ -498,7 +498,7 @@ e100_eeprom_write_word(struct e100_private *adapter, u16 reg, u16 data)
x = readw(&CSR_EEPROM_CONTROL_FIELD(adapter)); x = readw(&CSR_EEPROM_CONTROL_FIELD(adapter));
x &= ~(EEDI | EEDO | EESK); x &= ~(EEDI | EEDO | EESK);
writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter));
wmb(); readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
x |= EECS; x |= EECS;
writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter));
...@@ -587,7 +587,7 @@ eeprom_wait_cmd_done(struct e100_private *adapter) ...@@ -587,7 +587,7 @@ eeprom_wait_cmd_done(struct e100_private *adapter)
return true; return true;
set_current_state(TASK_UNINTERRUPTIBLE); set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1); schedule_timeout(1+(HZ-1)/100);
} }
return false; return false;
...@@ -606,9 +606,10 @@ eeprom_stand_by(struct e100_private *adapter) ...@@ -606,9 +606,10 @@ eeprom_stand_by(struct e100_private *adapter)
x = readw(&CSR_EEPROM_CONTROL_FIELD(adapter)); x = readw(&CSR_EEPROM_CONTROL_FIELD(adapter));
x &= ~(EECS | EESK); x &= ~(EECS | EESK);
writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter));
wmb(); readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
x |= EECS; x |= EECS;
writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter)); writew(x, &CSR_EEPROM_CONTROL_FIELD(adapter));
readw(&(adapter->scb->scb_status)); /* flush command to card */
udelay(EEPROM_STALL_TIME); udelay(EEPROM_STALL_TIME);
} }
...@@ -69,6 +69,10 @@ ANY LOSS OF USE; DATA, OR PROFITS; OR BUSINESS INTERUPTION) HOWEVER CAUSED ...@@ -69,6 +69,10 @@ ANY LOSS OF USE; DATA, OR PROFITS; OR BUSINESS INTERUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR
TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
Portions (C) 2002 Red Hat, Inc. under the terms of the GNU GPL v2.
*******************************************************************************/ *******************************************************************************/
/********************************************************************** /**********************************************************************
...@@ -122,7 +126,6 @@ static int e100_do_ethtool_ioctl(struct net_device *, struct ifreq *); ...@@ -122,7 +126,6 @@ static int e100_do_ethtool_ioctl(struct net_device *, struct ifreq *);
static void e100_get_speed_duplex_caps(struct e100_private *); static void e100_get_speed_duplex_caps(struct e100_private *);
static int e100_ethtool_get_settings(struct net_device *, struct ifreq *); static int e100_ethtool_get_settings(struct net_device *, struct ifreq *);
static int e100_ethtool_set_settings(struct net_device *, struct ifreq *); static int e100_ethtool_set_settings(struct net_device *, struct ifreq *);
static void e100_set_speed_duplex(struct e100_private *);
#ifdef ETHTOOL_GDRVINFO #ifdef ETHTOOL_GDRVINFO
static int e100_ethtool_get_drvinfo(struct net_device *, struct ifreq *); static int e100_ethtool_get_drvinfo(struct net_device *, struct ifreq *);
...@@ -163,7 +166,8 @@ static void e100_non_tx_background(unsigned long); ...@@ -163,7 +166,8 @@ static void e100_non_tx_background(unsigned long);
/* Global Data structures and variables */ /* Global Data structures and variables */
char e100_copyright[] __devinitdata = "Copyright (c) 2002 Intel Corporation"; char e100_copyright[] __devinitdata = "Copyright (c) 2002 Intel Corporation";
#define E100_VERSION "2.0.20-pre1" #define E100_VERSION "2.0.22-pre1"
#define E100_FULL_DRIVER_NAME "Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver " #define E100_FULL_DRIVER_NAME "Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver "
const char *e100_version = E100_VERSION; const char *e100_version = E100_VERSION;
...@@ -171,6 +175,13 @@ const char *e100_full_driver_name = E100_FULL_DRIVER_NAME E100_VERSION; ...@@ -171,6 +175,13 @@ const char *e100_full_driver_name = E100_FULL_DRIVER_NAME E100_VERSION;
char *e100_short_driver_name = "e100"; char *e100_short_driver_name = "e100";
static int e100nics = 0; static int e100nics = 0;
#ifdef CONFIG_PM
static int e100_save_state(struct pci_dev *pcid, u32 state);
static int e100_suspend(struct pci_dev *pcid, u32 state);
static int e100_enable_wake(struct pci_dev *pcid, u32 state, int enable);
static int e100_resume(struct pci_dev *pcid);
#endif
/*********************************************************************/ /*********************************************************************/
/*! This is a GCC extension to ANSI C. /*! This is a GCC extension to ANSI C.
* See the item "Labeled Elements in Initializers" in the section * See the item "Labeled Elements in Initializers" in the section
...@@ -203,6 +214,7 @@ struct net_device_stats *e100_get_stats(struct net_device *); ...@@ -203,6 +214,7 @@ struct net_device_stats *e100_get_stats(struct net_device *);
static void e100intr(int, void *, struct pt_regs *); static void e100intr(int, void *, struct pt_regs *);
static void e100_print_brd_conf(struct e100_private *); static void e100_print_brd_conf(struct e100_private *);
static void e100_set_multi(struct net_device *); static void e100_set_multi(struct net_device *);
void e100_set_speed_duplex(struct e100_private *);
char *e100_get_brand_msg(struct e100_private *); char *e100_get_brand_msg(struct e100_private *);
static u8 e100_pci_setup(struct pci_dev *, struct e100_private *); static u8 e100_pci_setup(struct pci_dev *, struct e100_private *);
...@@ -517,6 +529,7 @@ e100_dis_intr(struct e100_private *bdp) ...@@ -517,6 +529,7 @@ e100_dis_intr(struct e100_private *bdp)
{ {
/* Disable interrupts on our PCI board by setting the mask bit */ /* Disable interrupts on our PCI board by setting the mask bit */
writeb(SCB_INT_MASK, &bdp->scb->scb_cmd_hi); writeb(SCB_INT_MASK, &bdp->scb->scb_cmd_hi);
readw(&(bdp->scb->scb_status)); /* flushes last write, read-safe */
} }
/** /**
...@@ -537,6 +550,7 @@ e100_trigger_SWI(struct e100_private *bdp) ...@@ -537,6 +550,7 @@ e100_trigger_SWI(struct e100_private *bdp)
{ {
/* Trigger interrupt on our PCI board by asserting SWI bit */ /* Trigger interrupt on our PCI board by asserting SWI bit */
writeb(SCB_SOFT_INT, &bdp->scb->scb_cmd_hi); writeb(SCB_SOFT_INT, &bdp->scb->scb_cmd_hi);
readw(&(bdp->scb->scb_status)); /* flushes last write, read-safe */
} }
static int __devinit static int __devinit
...@@ -728,8 +742,15 @@ e100_remove1(struct pci_dev *pcid) ...@@ -728,8 +742,15 @@ e100_remove1(struct pci_dev *pcid)
} }
#ifdef ETHTOOL_GWOL #ifdef ETHTOOL_GWOL
/* Set up wol options and enable PME */ /* Set up wol options and enable PME if wol is enabled */
e100_do_wol(pcid, bdp); if (bdp->wolopts) {
e100_do_wol(pcid, bdp);
/* Enable PME for power state D3 */
pci_enable_wake(pcid, 3, 1);
/* Set power state to D1 in case driver is RELOADED */
/* If system powers down, device is switched from D1 to D3 */
pci_set_power_state(pcid, 1);
}
#endif #endif
e100_clear_structs(dev); e100_clear_structs(dev);
...@@ -744,8 +765,15 @@ static struct pci_driver e100_driver = { ...@@ -744,8 +765,15 @@ static struct pci_driver e100_driver = {
id_table: e100_id_table, id_table: e100_id_table,
probe: e100_found1, probe: e100_found1,
remove: __devexit_p(e100_remove1), remove: __devexit_p(e100_remove1),
#ifdef CONFIG_PM
suspend: e100_suspend,
resume: e100_resume,
save_state: e100_save_state,
enable_wake: e100_enable_wake,
#else
suspend: NULL, suspend: NULL,
resume: NULL, resume: NULL,
#endif
}; };
static int __init static int __init
...@@ -1194,7 +1222,7 @@ e100_set_multi(struct net_device *dev) ...@@ -1194,7 +1222,7 @@ e100_set_multi(struct net_device *dev)
/* reconfigure the chip if something has changed in its config space */ /* reconfigure the chip if something has changed in its config space */
e100_config(bdp); e100_config(bdp);
if ((promisc_enbl) || (mulcast_enbl)) { if (promisc_enbl || mulcast_enbl) {
goto exit; /* no need for Multicast Cmd */ goto exit; /* no need for Multicast Cmd */
} }
...@@ -1996,8 +2024,9 @@ e100_rx_srv(struct e100_private *bdp, u32 max_number_of_rfds, ...@@ -1996,8 +2024,9 @@ e100_rx_srv(struct e100_private *bdp, u32 max_number_of_rfds,
if (max_number_of_rfds && (rfd_cnt >= max_number_of_rfds)) { if (max_number_of_rfds && (rfd_cnt >= max_number_of_rfds)) {
break; break;
} }
if (list_empty(&(bdp->active_rx_list))) if (list_empty(&(bdp->active_rx_list))) {
break; break;
}
rx_struct = list_entry(bdp->active_rx_list.next, rx_struct = list_entry(bdp->active_rx_list.next,
struct rx_list_elem, list_elem); struct rx_list_elem, list_elem);
...@@ -2030,10 +2059,8 @@ e100_rx_srv(struct e100_private *bdp, u32 max_number_of_rfds, ...@@ -2030,10 +2059,8 @@ e100_rx_srv(struct e100_private *bdp, u32 max_number_of_rfds,
(data_sz + bdp->rfd_size), (data_sz + bdp->rfd_size),
PCI_DMA_FROMDEVICE); PCI_DMA_FROMDEVICE);
// we unmap using DMA_TODEVICE to avoid another memcpy from the
// bounce buffer
pci_unmap_single(bdp->pdev, rx_struct->dma_addr, pci_unmap_single(bdp->pdev, rx_struct->dma_addr,
sizeof (rfd_t), PCI_DMA_TODEVICE); sizeof (rfd_t), PCI_DMA_FROMDEVICE);
list_add(&(rx_struct->list_elem), &(bdp->rx_struct_pool)); list_add(&(rx_struct->list_elem), &(bdp->rx_struct_pool));
...@@ -2146,6 +2173,34 @@ e100_refresh_txthld(struct e100_private *bdp) ...@@ -2146,6 +2173,34 @@ e100_refresh_txthld(struct e100_private *bdp)
} /* end underrun check */ } /* end underrun check */
} }
#ifdef E100_ZEROCOPY
/**
* e100_pseudo_hdr_csum - compute IP pseudo-header checksum
* @ip: points to the header of the IP packet
*
* Return the 16 bit checksum of the IP pseudo-header.,which is computed
* on the fields: IP src, IP dst, next protocol, payload length.
* The checksum vaule is returned in network byte order.
*/
static inline u16
e100_pseudo_hdr_csum(const struct iphdr *ip)
{
u32 pseudo = 0;
u32 payload_len = 0;
payload_len = ntohs(ip->tot_len) - (ip->ihl * 4);
pseudo += htons(payload_len);
pseudo += (ip->protocol << 8);
pseudo += ip->saddr & 0x0000ffff;
pseudo += (ip->saddr & 0xffff0000) >> 16;
pseudo += ip->daddr & 0x0000ffff;
pseudo += (ip->daddr & 0xffff0000) >> 16;
return FOLD_CSUM(pseudo);
}
#endif /* E100_ZEROCOPY */
/** /**
* e100_prepare_xmit_buff - prepare a buffer for transmission * e100_prepare_xmit_buff - prepare a buffer for transmission
* @bdp: atapter's private data struct * @bdp: atapter's private data struct
...@@ -2204,10 +2259,9 @@ e100_prepare_xmit_buff(struct e100_private *bdp, struct sk_buff *skb) ...@@ -2204,10 +2259,9 @@ e100_prepare_xmit_buff(struct e100_private *bdp, struct sk_buff *skb)
chksum = &(udp->check); chksum = &(udp->check);
} }
*chksum = csum_tcpudp_magic(ip->daddr, ip->saddr, *chksum = e100_pseudo_hdr_csum(ip);
sizeof (struct tcphdr),
ip->protocol, 0);
} }
} else { } else {
if (bdp->flags & USE_IPCB) { if (bdp->flags & USE_IPCB) {
tcb->tcbu.ipcb.ip_activation_high = tcb->tcbu.ipcb.ip_activation_high =
...@@ -2319,9 +2373,8 @@ e100_start_cu(struct e100_private *bdp, tcb_t *tcb) ...@@ -2319,9 +2373,8 @@ e100_start_cu(struct e100_private *bdp, tcb_t *tcb)
if (!e100_wait_cus_idle(bdp)) if (!e100_wait_cus_idle(bdp))
printk("%s cu_start: timeout waiting for cu\n", printk("%s cu_start: timeout waiting for cu\n",
bdp->device->name); bdp->device->name);
if (!e100_wait_exec_cmplx(bdp, (u32) (tcb->tcb_phys), if (!e100_wait_exec_cmplx(bdp, (u32) (tcb->tcb_phys),
SCB_CUC_START)) { SCB_CUC_START)) {
printk("%s cu_start: timeout waiting for scb\n", printk("%s cu_start: timeout waiting for scb\n",
bdp->device->name); bdp->device->name);
e100_exec_cmplx(bdp, (u32) (tcb->tcb_phys), e100_exec_cmplx(bdp, (u32) (tcb->tcb_phys),
...@@ -2378,6 +2431,7 @@ e100_selftest(struct e100_private *bdp, u32 *st_timeout, u32 *st_result) ...@@ -2378,6 +2431,7 @@ e100_selftest(struct e100_private *bdp, u32 *st_timeout, u32 *st_result)
/* Do the port command */ /* Do the port command */
writel(selftest_cmd, &bdp->scb->scb_port); writel(selftest_cmd, &bdp->scb->scb_port);
readw(&(bdp->scb->scb_status)); /* flushes last write, read-safe */
/* Wait at least 10 milliseconds for the self-test to complete */ /* Wait at least 10 milliseconds for the self-test to complete */
set_current_state(TASK_UNINTERRUPTIBLE); set_current_state(TASK_UNINTERRUPTIBLE);
...@@ -2386,8 +2440,6 @@ e100_selftest(struct e100_private *bdp, u32 *st_timeout, u32 *st_result) ...@@ -2386,8 +2440,6 @@ e100_selftest(struct e100_private *bdp, u32 *st_timeout, u32 *st_result)
/* disable interrupts since the're now enabled */ /* disable interrupts since the're now enabled */
e100_dis_intr(bdp); e100_dis_intr(bdp);
rmb();
/* if The First Self Test DWORD Still Zero, We've timed out. If the /* if The First Self Test DWORD Still Zero, We've timed out. If the
* second DWORD is not zero then we have an error. */ * second DWORD is not zero then we have an error. */
if ((bdp->selftest->st_sign == 0) || (bdp->selftest->st_result != 0)) { if ((bdp->selftest->st_sign == 0) || (bdp->selftest->st_result != 0)) {
...@@ -2681,7 +2733,7 @@ e100_exec_non_cu_cmd(struct e100_private *bdp, nxmit_cb_entry_t *command) ...@@ -2681,7 +2733,7 @@ e100_exec_non_cu_cmd(struct e100_private *bdp, nxmit_cb_entry_t *command)
wmb(); wmb();
if (in_interrupt()) if (in_interrupt() || netif_running(bdp->device))
return e100_delayed_exec_non_cu_cmd(bdp, command); return e100_delayed_exec_non_cu_cmd(bdp, command);
spin_lock_bh(&(bdp->bd_non_tx_lock)); spin_lock_bh(&(bdp->bd_non_tx_lock));
...@@ -2711,7 +2763,7 @@ e100_exec_non_cu_cmd(struct e100_private *bdp, nxmit_cb_entry_t *command) ...@@ -2711,7 +2763,7 @@ e100_exec_non_cu_cmd(struct e100_private *bdp, nxmit_cb_entry_t *command)
bdp->next_cu_cmd = START_WAIT; bdp->next_cu_cmd = START_WAIT;
spin_unlock_irqrestore(&(bdp->bd_lock), lock_flag); spin_unlock_irqrestore(&(bdp->bd_lock), lock_flag);
/* now wait for completion of non-cu CB up to 20 msec*/ /* now wait for completion of non-cu CB up to 20 msec */
expiration_time = jiffies + HZ / 50 + 1; expiration_time = jiffies + HZ / 50 + 1;
while (time_before(jiffies, expiration_time)) { while (time_before(jiffies, expiration_time)) {
rmb(); rmb();
...@@ -2754,6 +2806,7 @@ e100_sw_reset(struct e100_private *bdp, u32 reset_cmd) ...@@ -2754,6 +2806,7 @@ e100_sw_reset(struct e100_private *bdp, u32 reset_cmd)
{ {
/* Do a selective reset first to avoid a potential PCI hang */ /* Do a selective reset first to avoid a potential PCI hang */
writel(PORT_SELECTIVE_RESET, &bdp->scb->scb_port); writel(PORT_SELECTIVE_RESET, &bdp->scb->scb_port);
readw(&(bdp->scb->scb_status)); /* flushes last write, read-safe */
/* wait for the reset to take effect */ /* wait for the reset to take effect */
udelay(20); udelay(20);
...@@ -3086,13 +3139,140 @@ e100_isolate_driver(struct e100_private *bdp) ...@@ -3086,13 +3139,140 @@ e100_isolate_driver(struct e100_private *bdp)
del_timer_sync(&bdp->watchdog_timer); del_timer_sync(&bdp->watchdog_timer);
netif_stop_queue(bdp->device); if (netif_running(bdp->device))
netif_stop_queue(bdp->device);
bdp->last_tcb = NULL; bdp->last_tcb = NULL;
e100_sw_reset(bdp, PORT_SELECTIVE_RESET); e100_sw_reset(bdp, PORT_SELECTIVE_RESET);
} }
void
e100_set_speed_duplex(struct e100_private *bdp)
{
e100_phy_set_speed_duplex(bdp, true);
e100_config_fc(bdp); /* re-config flow-control if necessary */
e100_config(bdp);
}
static void
e100_tcb_add_C_bit(struct e100_private *bdp)
{
tcb_t *tcb = (tcb_t *) bdp->tcb_pool.data;
int i;
for (i = 0; i < bdp->params.TxDescriptors; i++, tcb++) {
tcb->tcb_hdr.cb_status |= cpu_to_le16(CB_STATUS_COMPLETE);
}
}
/*
* Procedure: e100_hw_reset_recover
*
* Description: This routine will recover the hw after reset.
*
* Arguments:
* bdp - Ptr to this card's e100_bdconfig structure
* reset_cmd - s/w reset or selective reset.
*
* Returns:
* true upon success
* false upon failure
*/
unsigned char
e100_hw_reset_recover(struct e100_private *bdp, u32 reset_cmd)
{
bdp->last_tcb = NULL;
if (reset_cmd == PORT_SOFTWARE_RESET) {
/*load CU & RU base */
if (!e100_wait_exec_cmplx(bdp, 0, SCB_CUC_LOAD_BASE)) {
return false;
}
if (e100_load_microcode(bdp)) {
bdp->flags |= DF_UCODE_LOADED;
}
if (!e100_wait_exec_cmplx(bdp, 0, SCB_RUC_LOAD_BASE)) {
return false;
}
/* Issue the load dump counters address command */
if (!e100_wait_exec_cmplx(bdp, bdp->stat_cnt_phys,
SCB_CUC_DUMP_ADDR)) {
return false;
}
if (!e100_setup_iaaddr(bdp, bdp->device->dev_addr)) {
printk(KERN_ERR
"e100_hw_reset_recover: setup iaaddr failed\n");
return false;
}
e100_set_multi_exec(bdp->device);
/* Change for 82558 enhancement */
/* If 82558/9 and if the user has enabled flow control, set up * the
* Flow Control Reg. in the CSR */
if ((bdp->flags & IS_BACHELOR)
&& (bdp->params.b_params & PRM_FC)) {
writeb(DFLT_FC_THLD,
&bdp->scb->scb_ext.d101_scb.scb_fc_thld);
writeb(DFLT_FC_CMD,
&bdp->scb->scb_ext.d101_scb.scb_fc_xon_xoff);
}
}
e100_force_config(bdp);
return true;
}
void
e100_deisolate_driver(struct e100_private *bdp, u8 recover, u8 full_init)
{
if (full_init) {
e100_sw_reset(bdp, PORT_SOFTWARE_RESET);
if (!e100_hw_reset_recover(bdp, PORT_SOFTWARE_RESET))
printk(KERN_ERR "e100_deisolate_driver:"
" HW SOFTWARE reset recover failed\n");
}
if (recover) {
bdp->next_cu_cmd = START_WAIT;
bdp->last_tcb = NULL;
/* lets reset the chip */
if (!full_init) {
e100_sw_reset(bdp, PORT_SELECTIVE_RESET);
if (!e100_hw_reset_recover(bdp, PORT_SELECTIVE_RESET)) {
printk(KERN_ERR "e100_deisolate_driver:"
" HW reset recover failed\n");
}
}
e100_start_ru(bdp);
/* relaunch watchdog timer in 2 sec */
mod_timer(&(bdp->watchdog_timer), jiffies + (2 * HZ));
// we must clear tcbs since we may have lost Tx intrrupt
// or have unsent frames on the tcb chain
e100_tcb_add_C_bit(bdp);
e100_tx_srv(bdp);
e100_set_intr_mask(bdp);
if (netif_running(bdp->device))
netif_wake_queue(bdp->device);
}
bdp->driver_isolated = false;
}
#ifdef E100_ETHTOOL_IOCTL #ifdef E100_ETHTOOL_IOCTL
static int static int
e100_do_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr) e100_do_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
...@@ -3458,14 +3638,6 @@ e100_get_speed_duplex_caps(struct e100_private *bdp) ...@@ -3458,14 +3638,6 @@ e100_get_speed_duplex_caps(struct e100_private *bdp)
} }
static void
e100_set_speed_duplex(struct e100_private *bdp)
{
e100_phy_set_speed_duplex(bdp, true);
e100_config_fc(bdp); /* re-config flow-control if necessary */
e100_config(bdp);
}
#ifdef ETHTOOL_GWOL #ifdef ETHTOOL_GWOL
static unsigned char static unsigned char
e100_setup_filter(struct e100_private *bdp) e100_setup_filter(struct e100_private *bdp)
...@@ -3510,32 +3682,19 @@ e100_setup_filter(struct e100_private *bdp) ...@@ -3510,32 +3682,19 @@ e100_setup_filter(struct e100_private *bdp)
static void static void
e100_do_wol(struct pci_dev *pcid, struct e100_private *bdp) e100_do_wol(struct pci_dev *pcid, struct e100_private *bdp)
{ {
int enable = 0; e100_config_wol(bdp);
u32 state = 0;
if (bdp->wolopts) {
e100_config_wol(bdp);
if (!e100_config(bdp)) { if (e100_config(bdp)) {
printk("e100_config WOL options failed\n"); if (bdp->wolopts & (WAKE_UCAST | WAKE_ARP))
goto exit; if (!e100_setup_filter(bdp))
} printk(KERN_ERR
"e100_config WOL options failed\n");
if (bdp->wolopts & (WAKE_UCAST | WAKE_ARP)) { } else {
if (!e100_setup_filter(bdp)) { printk(KERN_ERR "e100_config WOL failed\n");
printk("e100_config WOL options failed\n");
goto exit;
}
state = 1;
pci_set_power_state(pcid, state);
}
enable = 1;
} }
exit:
pci_enable_wake(pcid, state, enable);
} }
static u16 static u16
e100_get_ip_lbytes(struct net_device *dev) e100_get_ip_lbytes(struct net_device *dev)
{ {
struct in_ifaddr *ifa; struct in_ifaddr *ifa;
...@@ -3795,3 +3954,84 @@ e100_non_tx_background(unsigned long ptr) ...@@ -3795,3 +3954,84 @@ e100_non_tx_background(unsigned long ptr)
} }
spin_unlock_bh(&(bdp->bd_non_tx_lock)); spin_unlock_bh(&(bdp->bd_non_tx_lock));
} }
#ifdef CONFIG_PM
static int
e100_save_state(struct pci_dev *pcid, u32 state)
{
struct net_device *dev;
struct e100_private *bdp;
/* Actually, PCI PM does NOT call this entry */
if (!(dev = (struct net_device *) pci_get_drvdata(pcid)))
return -1;
bdp = dev->priv;
pci_save_state(pcid, bdp->pci_state);
return 0;
}
static int
e100_suspend(struct pci_dev *pcid, u32 state)
{
struct net_device *netdev = pci_get_drvdata(pcid);
struct e100_private *bdp = netdev->priv;
e100_isolate_driver(bdp);
e100_save_state(pcid, state);
/* If wol is enabled */
#ifdef ETHTOOL_GWOL
if (bdp->wolopts) {
bdp->ip_lbytes = e100_get_ip_lbytes(netdev);
e100_do_wol(pcid, bdp);
pci_enable_wake(pcid, 3, 1); /* Enable PME for power state D3 */
pci_set_power_state(pcid, 3); /* Set power state to D3. */
} else {
/* Disable bus mastering */
pci_disable_device(pcid);
pci_set_power_state(pcid, state);
}
#else
pci_disable_device(pcid);
pci_set_power_state(pcid, state);
#endif
return 0;
}
static int
e100_resume(struct pci_dev *pcid)
{
struct net_device *netdev = pci_get_drvdata(pcid);
struct e100_private *bdp = netdev->priv;
u8 recover = false;
u8 full_init = false;
pci_set_power_state(pcid, 0);
pci_enable_wake(pcid, 0, 0); /* Clear PME status and disable PME */
pci_restore_state(pcid, bdp->pci_state);
if (netif_running(netdev)) {
recover = true;
}
#ifdef ETHTOOL_GWOL
if (bdp->wolopts & (WAKE_UCAST | WAKE_ARP)) {
full_init = true;
}
#endif
e100_deisolate_driver(bdp, recover, full_init);
return 0;
}
static int
e100_enable_wake(struct pci_dev *pcid, u32 state, int enable)
{
/* Driver doesn't need to do anything because it will enable */
/* wol when suspended. */
/* Actually, PCI PM does NOT call this entry. */
return 0;
}
#endif /* CONFIG_PM */
...@@ -769,7 +769,7 @@ e100_set_fc(struct e100_private *bdp) ...@@ -769,7 +769,7 @@ e100_set_fc(struct e100_private *bdp)
* Arguments: bdp - Pointer to the e100_private structure for the board * Arguments: bdp - Pointer to the e100_private structure for the board
* *
* Returns: true if link state was changed * Returns: true if link state was changed
* B_FLASE otherwise * false otherwise
* *
*/ */
unsigned char unsigned char
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment