Commit a5ac1ead authored by Martin Blumenstingl's avatar Martin Blumenstingl Committed by Neil Armstrong

clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel

The cpu_div3 clock (cpu_in divided by 3) generates a signal with a duty
cycle of 33%. The CPU clock however requires a clock signal with a duty
cycle of 50% to run stable.
cpu_div3 was observed to be problematic when cycling through all
available CPU frequencies (with additional patches on top of this one)
while running "stress --cpu 4" in the background. This caused sporadic
hangs where the whole system would fully lock up.

Amlogic's 3.10 kernel code also does not use the cpu_div3 clock either
when changing the CPU clock.
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarNeil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20181115224048.13511-3-martin.blumenstingl@googlemail.com
parent d6e81845
......@@ -608,20 +608,27 @@ static struct clk_regmap meson8b_cpu_scale_div = {
},
};
static u32 mux_table_cpu_scale_out_sel[] = { 0, 1, 3 };
static struct clk_regmap meson8b_cpu_scale_out_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_SYS_CPU_CLK_CNTL0,
.mask = 0x3,
.shift = 2,
.table = mux_table_cpu_scale_out_sel,
},
.hw.init = &(struct clk_init_data){
.name = "cpu_scale_out_sel",
.ops = &clk_regmap_mux_ro_ops,
/*
* NOTE: We are skipping the parent with value 0x2 (which is
* "cpu_div3") because it results in a duty cycle of 33% which
* makes the system unstable and can result in a lockup of the
* whole system.
*/
.parent_names = (const char *[]) { "cpu_in_sel",
"cpu_div2",
"cpu_div3",
"cpu_scale_div" },
.num_parents = 4,
.num_parents = 3,
.flags = CLK_SET_RATE_PARENT,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment