Merge branch 'next-s5pv210' into for-next

arch/arm/configs/s5pc110_defconfig

-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_S5PV210=y
-CONFIG_S3C_LOWLEVEL_UART_PORT=1
-CONFIG_MACH_SMDKC110=y
-CONFIG_VMSPLIT_2G=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CRAMFS=y
-CONFIG_ROMFS_FS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_MUTEXES=y
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_S3C_UART=1
-CONFIG_CRC_CCITT=y

arch/arm/configs/s5pv210_defconfig

@@ -7,6 +7,11 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_S5PV210=y
 CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_DEV_FB=y
+CONFIG_S5PV210_SETUP_FB_24BPP=y
+CONFIG_MACH_AQUILA=y
+CONFIG_MACH_GONI=y
+CONFIG_MACH_SMDKC110=y
 CONFIG_MACH_SMDKV210=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT=y

arch/arm/mach-s5pv210/Kconfig

@@ -27,11 +27,21 @@ config S5PV210_SETUP_I2C2
 	help
 	  Common setup code for i2c bus 2.
 
+config S5PV210_SETUP_IDE
+	bool
+	help
+	  Common setup code for S5PV210 IDE GPIO configurations
+
 config S5PV210_SETUP_FB_24BPP
 	bool
 	help
           Common setup code for S5PV210 with an 24bpp RGB display helper.
 
+config S5PV210_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for keypad.
+
 config S5PV210_SETUP_SDHCI
         bool
         select S5PV210_SETUP_SDHCI_GPIO
@@ -43,14 +53,19 @@ config S5PV210_SETUP_SDHCI_GPIO
 	help
 	  Common setup code for SDHCI gpio.
 
-# machine support
+menu "S5PC110 Machines"
 
 config MACH_AQUILA
-	bool "Samsung Aquila"
+	bool "Aquila"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
 	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_SDHCI
 	select S3C_DEV_FB
+	select S5PC110_DEV_ONENAND
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
@@ -58,34 +73,70 @@ config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S5PC110_DEV_ONENAND
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
 
+config MACH_SMDKC110
+	bool "SMDKC110"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select SAMSUNG_DEV_IDE
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_WATCHDOG
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	help
+	  Machine support for Samsung SMDKC110
+	  S5PC110(MCP) is one of package option of S5PV210
+
+endmenu
+
 config S5PC110_DEV_ONENAND
 	bool
 	help
 	  Compile in platform device definition for OneNAND1 controller
 
+menu "S5PV210 Machines"
+
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
 	select SAMSUNG_DEV_ADC
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_TS
+	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select HAVE_S3C_RTC
 	select HAVE_S3C2410_WATCHDOG
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung SMDKV210
 
-config MACH_SMDKC110
-	bool "SMDKC110"
-	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
-	select S3C_DEV_WDT
-	select HAVE_S3C2410_WATCHDOG
-	help
-	  Machine support for Samsung SMDKC110
-	  S5PC110(MCP) is one of package option of S5PV210
+endmenu
 
 endif

arch/arm/mach-s5pv210/Makefile

@@ -31,5 +31,7 @@ obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
 obj-$(CONFIG_S5PV210_SETUP_FB_24BPP)	+= setup-fb-24bpp.o
 obj-$(CONFIG_S5PV210_SETUP_I2C1) 	+= setup-i2c1.o
 obj-$(CONFIG_S5PV210_SETUP_I2C2) 	+= setup-i2c2.o
+obj-$(CONFIG_S5PV210_SETUP_IDE)		+= setup-ide.o
+obj-$(CONFIG_S5PV210_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o

arch/arm/mach-s5pv210/cpu.c

@@ -32,8 +32,11 @@
 #include <plat/devs.h>
 #include <plat/clock.h>
 #include <plat/s5pv210.h>
+#include <plat/ata-core.h>
 #include <plat/iic-core.h>
+#include <plat/keypad-core.h>
 #include <plat/sdhci.h>
+#include <plat/reset.h>
 
 /* Initial IO mappings */
 
@@ -69,6 +72,11 @@ static void s5pv210_idle(void)
 	local_irq_enable();
 }
 
+static void s5pv210_sw_reset(void)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
 /* s5pv210_map_io
  *
  * register the standard cpu IO areas
@@ -79,18 +87,23 @@ void __init s5pv210_map_io(void)
 #ifdef CONFIG_S3C_DEV_ADC
 	s3c_device_adc.name	= "s3c64xx-adc";
 #endif
-
 	iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
 
 	/* initialise device information early */
 	s5pv210_default_sdhci0();
 	s5pv210_default_sdhci1();
 	s5pv210_default_sdhci2();
+	s5pv210_default_sdhci3();
+
+	s3c_cfcon_setname("s5pv210-pata");
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
 	s3c_i2c2_setname("s3c2440-i2c");
+
+	/* Use s5pv210-keypad instead of samsung-keypad */
+	samsung_keypad_setname("s5pv210-keypad");
 }
 
 void __init s5pv210_init_clocks(int xtal)
@@ -138,5 +151,8 @@ int __init s5pv210_init(void)
 	/* set idle function */
 	pm_idle = s5pv210_idle;
 
+	/* set sw_reset function */
+	s5p_reset_hook = s5pv210_sw_reset;
+
 	return sysdev_register(&s5pv210_sysdev);
 }

arch/arm/mach-s5pv210/dev-onenand.c

@@ -27,9 +27,14 @@ static struct resource s5pc110_onenand_resources[] = {
 	},
 	[1] = {
 		.start	= S5PC110_PA_ONENAND_DMA,
-		.end	= S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+		.end	= S5PC110_PA_ONENAND_DMA + SZ_8K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
+	[2] = {
+		.start	= IRQ_ONENAND_AUDI,
+		.end	= IRQ_ONENAND_AUDI,
+		.flags	= IORESOURCE_IRQ,
+	},
 };
 
 struct platform_device s5pc110_device_onenand = {

arch/arm/mach-s5pv210/gpiolib.c

@@ -206,6 +206,20 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 			.ngpio	= S5PV210_GPIO_MP03_NR,
 			.label	= "MP03",
 		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP04(0),
+			.ngpio	= S5PV210_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV210_MP05(0),
+			.ngpio	= S5PV210_GPIO_MP05_NR,
+			.label	= "MP05",
+		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC00),
 		.config	= &gpio_cfg_noint,

arch/arm/mach-s5pv210/include/mach/gpio.h

@@ -52,6 +52,8 @@
 #define S5PV210_GPIO_MP01_NR	(8)
 #define S5PV210_GPIO_MP02_NR	(4)
 #define S5PV210_GPIO_MP03_NR	(8)
+#define S5PV210_GPIO_MP04_NR	(8)
+#define S5PV210_GPIO_MP05_NR	(8)
 
 /* GPIO bank numbers */
 
@@ -94,6 +96,8 @@ enum s5p_gpio_number {
 	S5PV210_GPIO_MP01_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_J4),
 	S5PV210_GPIO_MP02_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP01),
 	S5PV210_GPIO_MP03_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP02),
+	S5PV210_GPIO_MP04_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP03),
+	S5PV210_GPIO_MP05_START	= S5PV210_GPIO_NEXT(S5PV210_GPIO_MP04),
 };
 
 /* S5PV210 GPIO number definitions */
@@ -127,13 +131,15 @@ enum s5p_gpio_number {
 #define S5PV210_MP01(_nr)	(S5PV210_GPIO_MP01_START + (_nr))
 #define S5PV210_MP02(_nr)	(S5PV210_GPIO_MP02_START + (_nr))
 #define S5PV210_MP03(_nr)	(S5PV210_GPIO_MP03_START + (_nr))
+#define S5PV210_MP04(_nr)	(S5PV210_GPIO_MP04_START + (_nr))
+#define S5PV210_MP05(_nr)	(S5PV210_GPIO_MP05_START + (_nr))
 
 /* the end of the S5PV210 specific gpios */
-#define S5PV210_GPIO_END	(S5PV210_MP03(S5PV210_GPIO_MP03_NR) + 1)
+#define S5PV210_GPIO_END	(S5PV210_MP05(S5PV210_GPIO_MP05_NR) + 1)
 #define S3C_GPIO_END		S5PV210_GPIO_END
 
-/* define the number of gpios we need to the one after the MP03() range */
-#define ARCH_NR_GPIOS		(S5PV210_MP03(S5PV210_GPIO_MP03_NR) +	\
+/* define the number of gpios we need to the one after the MP05() range */
+#define ARCH_NR_GPIOS		(S5PV210_MP05(S5PV210_GPIO_MP05_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
 #include <asm-generic/gpio.h>

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -45,7 +45,7 @@
 #define IRQ_IEMIEC		S5P_IRQ_VIC1(6)
 #define IRQ_ONENAND		S5P_IRQ_VIC1(7)
 #define IRQ_NFC			S5P_IRQ_VIC1(8)
-#define IRQ_CFC			S5P_IRQ_VIC1(9)
+#define IRQ_CFCON		S5P_IRQ_VIC1(9)
 #define IRQ_UART0		S5P_IRQ_VIC1(10)
 #define IRQ_UART1		S5P_IRQ_VIC1(11)
 #define IRQ_UART2		S5P_IRQ_VIC1(12)

arch/arm/mach-s5pv210/include/mach/map.h

@@ -32,6 +32,8 @@
 #define S5PV210_PA_SPI0		0xE1300000
 #define S5PV210_PA_SPI1		0xE1400000
 
+#define S5PV210_PA_KEYPAD	(0xE1600000)
+
 #define S5PV210_PA_IIC0		(0xE1800000)
 #define S5PV210_PA_IIC1		(0xFAB00000)
 #define S5PV210_PA_IIC2		(0xE1A00000)
@@ -43,6 +45,7 @@
 
 #define S5PV210_PA_WATCHDOG	(0xE2700000)
 
+#define S5PV210_PA_RTC		(0xE2800000)
 #define S5PV210_PA_UART		(0xE2900000)
 
 #define S5P_PA_UART0		(S5PV210_PA_UART + 0x0)
@@ -54,6 +57,8 @@
 
 #define S5PV210_PA_SROMC	(0xE8000000)
 
+#define S5PV210_PA_CFCON	(0xE8200000)
+
 #define S5PV210_PA_MDMA		0xFA200000
 #define S5PV210_PA_PDMA0	0xE0900000
 #define S5PV210_PA_PDMA1	0xE0A00000
@@ -97,12 +102,16 @@
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
 #define S3C_PA_HSMMC1		S5PV210_PA_HSMMC(1)
 #define S3C_PA_HSMMC2		S5PV210_PA_HSMMC(2)
+#define S3C_PA_HSMMC3		S5PV210_PA_HSMMC(3)
 #define S3C_PA_IIC		S5PV210_PA_IIC0
 #define S3C_PA_IIC1		S5PV210_PA_IIC1
 #define S3C_PA_IIC2		S5PV210_PA_IIC2
 #define S3C_PA_FB		S5PV210_PA_FB
+#define S3C_PA_RTC		S5PV210_PA_RTC
 #define S3C_PA_WDT		S5PV210_PA_WATCHDOG
 
 #define SAMSUNG_PA_ADC		S5PV210_PA_ADC
+#define SAMSUNG_PA_CFCON	S5PV210_PA_CFCON
+#define SAMSUNG_PA_KEYPAD	S5PV210_PA_KEYPAD
 
 #endif /* __ASM_ARCH_MAP_H */

arch/arm/mach-s5pv210/include/mach/memory.h

@@ -16,8 +16,13 @@
 #define PHYS_OFFSET		UL(0x20000000)
 #define CONSISTENT_DMA_SIZE	(SZ_8M + SZ_4M + SZ_2M)
 
-/* Maximum of 256MiB in one bank */
-#define MAX_PHYSMEM_BITS	32
+/*
+ * Sparsemem support
+ * Physical memory can be located from 0x20000000 to 0x7fffffff,
+ * so MAX_PHYSMEM_BITS is 31.
+ */
+
+#define MAX_PHYSMEM_BITS	31
 #define SECTION_SIZE_BITS	28
 
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -90,6 +90,8 @@
 #define S5P_CLKDIV0_PCLK66_SHIFT	(28)
 #define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
 
+#define S5P_SWRESET		S5P_CLKREG(0x2000)
+
 /* Registers related to power management */
 #define S5P_PWR_CFG		S5P_CLKREG(0xC000)
 #define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)

arch/arm/mach-s5pv210/mach-aquila.c

@@ -13,6 +13,12 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 #include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -23,11 +29,13 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -39,38 +47,44 @@
 
 #define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define S5PV210_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
-static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
+static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
 	[0] = {
 		.hwport		= 0,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		/*
+		 * Actually UART0 can support 256 bytes fifo, but aquila board
+		 * supports 128 bytes fifo because of initial chip bug
+		 */
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
@@ -116,19 +130,376 @@ static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data aquila_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo7_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data aquila_ldo17_data = {
+	.constraints	= {
+		.name		= "CAM_8M_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data aquila_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data aquila_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data aquila_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data aquila_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data aquila_regulators[] = {
+	{ MAX8998_LDO2,  &aquila_ldo2_data },
+	{ MAX8998_LDO3,  &aquila_ldo3_data },
+	{ MAX8998_LDO4,  &aquila_ldo4_data },
+	{ MAX8998_LDO5,  &aquila_ldo5_data },
+	{ MAX8998_LDO6,  &aquila_ldo6_data },
+	{ MAX8998_LDO7,  &aquila_ldo7_data },
+	{ MAX8998_LDO8,  &aquila_ldo8_data },
+	{ MAX8998_LDO9,  &aquila_ldo9_data },
+	{ MAX8998_LDO10, &aquila_ldo10_data },
+	{ MAX8998_LDO11, &aquila_ldo11_data },
+	{ MAX8998_LDO12, &aquila_ldo12_data },
+	{ MAX8998_LDO13, &aquila_ldo13_data },
+	{ MAX8998_LDO14, &aquila_ldo14_data },
+	{ MAX8998_LDO15, &aquila_ldo15_data },
+	{ MAX8998_LDO16, &aquila_ldo16_data },
+	{ MAX8998_LDO17, &aquila_ldo17_data },
+	{ MAX8998_BUCK1, &aquila_buck1_data },
+	{ MAX8998_BUCK2, &aquila_buck2_data },
+	{ MAX8998_BUCK3, &aquila_buck3_data },
+	{ MAX8998_BUCK4, &aquila_buck4_data },
+};
+
+static struct max8998_platform_data aquila_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(aquila_regulators),
+	.regulators	= aquila_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device aquila_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data = &aquila_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &aquila_max8998_pdata,
+	},
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button aquila_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data aquila_gpio_keys_data = {
+	.buttons	= aquila_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(aquila_gpio_keys_table),
+};
+
+static struct platform_device aquila_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &aquila_gpio_keys_data,
+	},
+};
+
+static void __init aquila_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define AQUILA_EXT_FLASH_EN	S5PV210_MP05(4)
+#define AQUILA_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= AQUILA_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static void aquila_setup_sdhci(void)
+{
+	gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
+	gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
+
+	s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
+};
+
 static struct platform_device *aquila_devices[] __initdata = {
+	&aquila_i2c_gpio_pmic,
+	&aquila_device_gpiokeys,
 	&s3c_device_fb,
+	&s5pc110_device_onenand,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
 };
 
 static void __init aquila_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
 	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkv210_uartcfgs, ARRAY_SIZE(smdkv210_uartcfgs));
+	s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
 }
 
 static void __init aquila_machine_init(void)
 {
+	/* PMIC */
+	aquila_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	aquila_setup_sdhci();
+
 	/* FB */
 	s3c_fb_set_platdata(&aquila_lcd_pdata);
 

arch/arm/mach-s5pv210/mach-goni.c

@@ -12,6 +12,13 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/fb.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/mfd/max8998.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -20,11 +27,15 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-fb.h>
 
+#include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/fb.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -36,9 +47,7 @@
 
 #define S5PV210_ULCON_DEFAULT	S3C2410_LCON_CS8
 
-#define S5PV210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
+#define S5PV210_UFCON_DEFAULT	S3C2410_UFCON_FIFOMODE
 
 static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
 	[0] = {
@@ -46,32 +55,413 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
 	},
 	[1] = {
 		.hwport		= 1,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
 	},
 	[2] = {
 		.hwport		= 2,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 	[3] = {
 		.hwport		= 3,
 		.flags		= 0,
 		.ucon		= S5PV210_UCON_DEFAULT,
 		.ulcon		= S5PV210_ULCON_DEFAULT,
-		.ufcon		= S5PV210_UFCON_DEFAULT,
+		.ufcon		= S5PV210_UFCON_DEFAULT |
+			S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
 	},
 };
 
+/* Frame Buffer */
+static struct s3c_fb_pd_win goni_fb_win0 = {
+	.win_mode = {
+		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
+		.left_margin	= 16,
+		.right_margin	= 16,
+		.upper_margin	= 3,
+		.lower_margin	= 28,
+		.hsync_len	= 2,
+		.vsync_len	= 2,
+		.xres		= 480,
+		.yres		= 800,
+		.refresh	= 55,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
+	.win[0]		= &goni_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
+			  VIDCON0_CLKSEL_LCD,
+	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
+			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
+};
+
+/* MAX8998 regulators */
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+
+static struct regulator_init_data goni_ldo2_data = {
+	.constraints	= {
+		.name		= "VALIVE_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_ldo3_data = {
+	.constraints	= {
+		.name		= "VUSB/MIPI_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo4_data = {
+	.constraints	= {
+		.name		= "VDAC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo5_data = {
+	.constraints	= {
+		.name		= "VTF_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo6_data = {
+	.constraints	= {
+		.name		= "VCC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo7_data = {
+	.constraints	= {
+		.name		= "VLCD_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo8_data = {
+	.constraints	= {
+		.name		= "VUSB/VADC_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo9_data = {
+	.constraints	= {
+		.name		= "VCC/VCAM_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo10_data = {
+	.constraints	= {
+		.name		= "VPLL_1.1V",
+		.min_uV		= 1100000,
+		.max_uV		= 1100000,
+		.apply_uV	= 1,
+		.boot_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo11_data = {
+	.constraints	= {
+		.name		= "CAM_IO_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo12_data = {
+	.constraints	= {
+		.name		= "CAM_ISP_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo13_data = {
+	.constraints	= {
+		.name		= "CAM_A_2.8V",
+		.min_uV		= 2800000,
+		.max_uV		= 2800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo14_data = {
+	.constraints	= {
+		.name		= "CAM_CIF_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo15_data = {
+	.constraints	= {
+		.name		= "CAM_AF_3.3V",
+		.min_uV		= 3300000,
+		.max_uV		= 3300000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo16_data = {
+	.constraints	= {
+		.name		= "VMIPI_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct regulator_init_data goni_ldo17_data = {
+	.constraints	= {
+		.name		= "VCC_3.0V_LCD",
+		.min_uV		= 3000000,
+		.max_uV		= 3000000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+/* BUCK */
+static struct regulator_consumer_supply buck1_consumer[] = {
+	{	.supply	= "vddarm", },
+};
+
+static struct regulator_consumer_supply buck2_consumer[] = {
+	{	.supply	= "vddint", },
+};
+
+static struct regulator_init_data goni_buck1_data = {
+	.constraints	= {
+		.name		= "VARM_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
+	.consumer_supplies	= buck1_consumer,
+};
+
+static struct regulator_init_data goni_buck2_data = {
+	.constraints	= {
+		.name		= "VINT_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
+	.consumer_supplies	= buck2_consumer,
+};
+
+static struct regulator_init_data goni_buck3_data = {
+	.constraints	= {
+		.name		= "VCC_1.8V",
+		.min_uV		= 1800000,
+		.max_uV		= 1800000,
+		.apply_uV	= 1,
+		.state_mem	= {
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data goni_buck4_data = {
+	.constraints	= {
+		.name		= "CAM_CORE_1.2V",
+		.min_uV		= 1200000,
+		.max_uV		= 1200000,
+		.apply_uV	= 1,
+		.always_on	= 1,
+	},
+};
+
+static struct max8998_regulator_data goni_regulators[] = {
+	{ MAX8998_LDO2,  &goni_ldo2_data },
+	{ MAX8998_LDO3,  &goni_ldo3_data },
+	{ MAX8998_LDO4,  &goni_ldo4_data },
+	{ MAX8998_LDO5,  &goni_ldo5_data },
+	{ MAX8998_LDO6,  &goni_ldo6_data },
+	{ MAX8998_LDO7,  &goni_ldo7_data },
+	{ MAX8998_LDO8,  &goni_ldo8_data },
+	{ MAX8998_LDO9,  &goni_ldo9_data },
+	{ MAX8998_LDO10, &goni_ldo10_data },
+	{ MAX8998_LDO11, &goni_ldo11_data },
+	{ MAX8998_LDO12, &goni_ldo12_data },
+	{ MAX8998_LDO13, &goni_ldo13_data },
+	{ MAX8998_LDO14, &goni_ldo14_data },
+	{ MAX8998_LDO15, &goni_ldo15_data },
+	{ MAX8998_LDO16, &goni_ldo16_data },
+	{ MAX8998_LDO17, &goni_ldo17_data },
+	{ MAX8998_BUCK1, &goni_buck1_data },
+	{ MAX8998_BUCK2, &goni_buck2_data },
+	{ MAX8998_BUCK3, &goni_buck3_data },
+	{ MAX8998_BUCK4, &goni_buck4_data },
+};
+
+static struct max8998_platform_data goni_max8998_pdata = {
+	.num_regulators	= ARRAY_SIZE(goni_regulators),
+	.regulators	= goni_regulators,
+};
+#endif
+
+/* GPIO I2C PMIC */
+#define AP_I2C_GPIO_PMIC_BUS_4	4
+static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
+	.sda_pin	= S5PV210_GPJ4(0),	/* XMSMCSN */
+	.scl_pin	= S5PV210_GPJ4(3),	/* XMSMIRQN */
+};
+
+static struct platform_device goni_i2c_gpio_pmic = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_PMIC_BUS_4,
+	.dev		= {
+		.platform_data	= &goni_i2c_gpio_pmic_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
+#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
+	{
+		/* 0xCC when SRAD = 0 */
+		I2C_BOARD_INFO("max8998", 0xCC >> 1),
+		.platform_data = &goni_max8998_pdata,
+	},
+#endif
+};
+
+/* PMIC Power button */
+static struct gpio_keys_button goni_gpio_keys_table[] = {
+	{
+		.code 		= KEY_POWER,
+		.gpio		= S5PV210_GPH2(6),
+		.desc		= "gpio-keys: KEY_POWER",
+		.type		= EV_KEY,
+		.active_low	= 1,
+		.wakeup		= 1,
+		.debounce_interval = 1,
+	},
+};
+
+static struct gpio_keys_platform_data goni_gpio_keys_data = {
+	.buttons	= goni_gpio_keys_table,
+	.nbuttons	= ARRAY_SIZE(goni_gpio_keys_table),
+};
+
+static struct platform_device goni_device_gpiokeys = {
+	.name = "gpio-keys",
+	.dev = {
+		.platform_data = &goni_gpio_keys_data,
+	},
+};
+
+static void __init goni_pmic_init(void)
+{
+	/* AP_PMIC_IRQ: EINT7 */
+	s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
+
+	/* nPower: EINT22 */
+	s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
+}
+
+/* MoviNAND */
+static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
+	/* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define GONI_EXT_FLASH_EN	S5PV210_MP05(4)
+#define GONI_EXT_FLASH_CD	S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
+	.max_width		= 4,
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= GONI_EXT_FLASH_CD,
+	.ext_cd_gpio_invert	= 1,
+};
+
+static void goni_setup_sdhci(void)
+{
+	gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
+	gpio_direction_output(GONI_EXT_FLASH_EN, 1);
+
+	s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
+	s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
+	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
+};
+
 static struct platform_device *goni_devices[] __initdata = {
+	&s3c_device_fb,
+	&s5pc110_device_onenand,
+	&goni_i2c_gpio_pmic,
+	&goni_device_gpiokeys,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
 };
 
 static void __init goni_map_io(void)
@@ -83,6 +473,16 @@ static void __init goni_map_io(void)
 
 static void __init goni_machine_init(void)
 {
+	/* PMIC */
+	goni_pmic_init();
+	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
+			ARRAY_SIZE(i2c_gpio_pmic_devs));
+	/* SDHCI */
+	goni_setup_sdhci();
+
+	/* FB */
+	s3c_fb_set_platdata(&goni_lcd_pdata);
+
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
+#include <linux/i2c.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -25,6 +26,8 @@
 #include <plat/s5pv210.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -71,12 +74,33 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	},
 };
 
+static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
 static struct platform_device *smdkc110_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s3c_device_cfcon,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&s3c_device_rtc,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkc110_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static void __init smdkc110_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -86,6 +110,18 @@ static void __init smdkc110_map_io(void)
 
 static void __init smdkc110_machine_init(void)
 {
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkc110_i2c_devs0,
+			ARRAY_SIZE(smdkc110_i2c_devs0));
+	i2c_register_board_info(1, smdkc110_i2c_devs1,
+			ARRAY_SIZE(smdkc110_i2c_devs1));
+	i2c_register_board_info(2, smdkc110_i2c_devs2,
+			ARRAY_SIZE(smdkc110_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkc110_ide_pdata);
+
 	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));
 }
 

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -10,6 +10,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
@@ -27,6 +28,9 @@
 #include <plat/cpu.h>
 #include <plat/adc.h>
 #include <plat/ts.h>
+#include <plat/ata.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -73,14 +77,59 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
 	},
 };
 
+static struct s3c_ide_platdata smdkv210_ide_pdata __initdata = {
+	.setup_gpio	= s5pv210_ide_setup_gpio,
+};
+
+static uint32_t smdkv210_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
+	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
+	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
+	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
+};
+
+static struct matrix_keymap_data smdkv210_keymap_data __initdata = {
+	.keymap		= smdkv210_keymap,
+	.keymap_size	= ARRAY_SIZE(smdkv210_keymap),
+};
+
+static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
+	.keymap_data	= &smdkv210_keymap_data,
+	.rows		= 8,
+	.cols		= 8,
+};
+
 static struct platform_device *smdkv210_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
 	&s3c_device_adc,
+	&s3c_device_cfcon,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&samsung_device_keypad,
+	&s3c_device_rtc,
 	&s3c_device_ts,
 	&s3c_device_wdt,
 };
 
+static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
+	{ I2C_BOARD_INFO("24c08", 0x50), },     /* Samsung S524AD0XD1 */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs1[] __initdata = {
+	/* To Be Updated */
+};
+
+static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = {
+	/* To Be Updated */
+};
+
 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
 	.delay			= 10000,
 	.presc			= 49,
@@ -96,7 +145,21 @@ static void __init smdkv210_map_io(void)
 
 static void __init smdkv210_machine_init(void)
 {
+	samsung_keypad_set_platdata(&smdkv210_keypad_data);
 	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	s3c_i2c2_set_platdata(NULL);
+	i2c_register_board_info(0, smdkv210_i2c_devs0,
+			ARRAY_SIZE(smdkv210_i2c_devs0));
+	i2c_register_board_info(1, smdkv210_i2c_devs1,
+			ARRAY_SIZE(smdkv210_i2c_devs1));
+	i2c_register_board_info(2, smdkv210_i2c_devs2,
+			ARRAY_SIZE(smdkv210_i2c_devs2));
+
+	s3c_ide_set_platdata(&smdkv210_ide_pdata);
+
 	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
 }
 

arch/arm/mach-s5pv210/setup-ide.c

+/* linux/arch/arm/mach-s5pv210/setup-ide.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S5PV210 setup information for IDE
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+
+void s5pv210_ide_setup_gpio(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PV210_GPJ0(0); gpio <= S5PV210_GPJ0(7); gpio++) {
+		/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST,
+			CF_DMACK */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ2(0); gpio <= S5PV210_GPJ2(7); gpio++) {
+		/*CF_Data[0 - 7] */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ3(0); gpio <= S5PV210_GPJ3(7); gpio++) {
+		/* CF_Data[8 - 15] */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+
+	for (gpio = S5PV210_GPJ4(0); gpio <= S5PV210_GPJ4(3); gpio++) {
+		/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
+	}
+}

arch/arm/mach-s5pv210/setup-keypad.c

+/*
+ * linux/arch/arm/mach-s5pv210/setup-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
+{
+	unsigned int gpio, end;
+
+	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
+	end = S5PV210_GPH3(rows);
+	for (gpio = S5PV210_GPH3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
+	end = S5PV210_GPH2(cols);
+	for (gpio = S5PV210_GPH2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}

arch/arm/mach-s5pv210/setup-sdhci-gpio.c

@@ -102,3 +102,23 @@ void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 	s3c_gpio_setpull(S5PV210_GPG2(2), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S5PV210_GPG2(2), S3C_GPIO_SFN(2));
 }
+
+void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+
+	/* Set all the necessary GPG3[0:2] pins to special-function 2 */
+	for (gpio = S5PV210_GPG3(0); gpio < S5PV210_GPG3(2); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Data pin GPG3[3:6] to special-function 2 */
+	for (gpio = S5PV210_GPG3(3); gpio <= S5PV210_GPG3(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PV210_GPG3(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PV210_GPG3(2), S3C_GPIO_SFN(2));
+}

arch/arm/mach-s5pv210/setup-sdhci.c

@@ -26,9 +26,9 @@
 
 char *s5pv210_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",		/* HCLK */
-	[1] = "hsmmc",		/* HCLK */
+	/* [1] = "hsmmc",	- duplicate HCLK entry */
 	[2] = "sclk_mmc",	/* mmc_bus */
-	/*[4] = reserved */
+	/* [3] = NULL,		- reserved */
 };
 
 void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,

arch/arm/plat-samsung/include/plat/keypad-core.h

+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad-core.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung keypad controller core function
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_KEYPAD_CORE_H
+#define __ASM_ARCH_KEYPAD_CORE_H
+
+/* These function are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void samsung_keypad_setname(char *name)
+{
+#ifdef CONFIG_SAMSUNG_DEV_KEYPAD
+	samsung_device_keypad.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_KEYPAD_CORE_H */

arch/arm/plat-samsung/include/plat/sdhci.h

@@ -78,6 +78,7 @@ extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -266,10 +267,22 @@ static inline void s5pv210_default_sdhci2(void)
 static inline void s5pv210_default_sdhci2(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC2 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC3
+static inline void s5pv210_default_sdhci3(void)
+{
+	s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
+	s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
+	s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
+}
+#else
+static inline void s5pv210_default_sdhci3(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC3 */
+
 #else
 static inline void s5pv210_default_sdhci0(void) { }
 static inline void s5pv210_default_sdhci1(void) { }
 static inline void s5pv210_default_sdhci2(void) { }
+static inline void s5pv210_default_sdhci3(void) { }
 #endif /* CONFIG_S5PC100_SETUP_SDHCI */