Merge branch 'cleanup/kconfig' into next/drivers

This resolves a conflict between the new sti reset
controller driver and the Kconfig cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/Kconfig

@@ -306,9 +306,11 @@ choice
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
 	depends on MMU
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
@@ -907,16 +909,18 @@ config ARCH_MULTI_V4_V5
 config ARCH_MULTI_V6
 	bool "ARMv6 based platforms (ARM11)"
 	select ARCH_MULTI_V6_V7
-	select CPU_V6
+	select CPU_V6K
 
 config ARCH_MULTI_V7
 	bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
 	default y
 	select ARCH_MULTI_V6_V7
 	select CPU_V7
+	select HAVE_SMP
 
 config ARCH_MULTI_V6_V7
 	bool
+	select MIGHT_HAVE_CACHE_L2X0
 
 config ARCH_MULTI_CPU_AUTO
 	def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
@@ -924,6 +928,13 @@ config ARCH_MULTI_CPU_AUTO
 
 endmenu
 
+config ARCH_VIRT
+	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -1049,8 +1060,6 @@ source "arch/arm/mach-versatile/Kconfig"
 source "arch/arm/mach-vexpress/Kconfig"
 source "arch/arm/plat-versatile/Kconfig"
 
-source "arch/arm/mach-virt/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
 source "arch/arm/mach-w90x900/Kconfig"

arch/arm/Makefile

@@ -200,7 +200,6 @@ machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
-machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq

arch/arm/mach-bcm/Kconfig

@@ -16,12 +16,7 @@ config ARCH_BCM_MOBILE
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
-	select CPU_V7
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_TIME
 	select GPIO_BCM_KONA
-	select SPARSE_IRQ
 	select TICK_ONESHOT
 	select CACHE_L2X0
 	select HAVE_ARM_ARCH_TIMER

arch/arm/mach-bcm2835/Kconfig

@@ -4,10 +4,6 @@ config ARCH_BCM2835
 	select ARM_AMBA
 	select ARM_ERRATA_411920
 	select ARM_TIMER_SP804
-	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select CPU_V6
-	select GENERIC_CLOCKEVENTS
 	select PINCTRL
 	select PINCTRL_BCM2835
 	help

arch/arm/mach-berlin/Kconfig

 config ARCH_BERLIN
 	bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
 	select ARM_GIC
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select COMMON_CLK
 	select DW_APB_ICTL
 	select DW_APB_TIMER_OF
 
@@ -16,12 +14,10 @@ config MACH_BERLIN_BG2
 	select CACHE_L2X0
 	select CPU_PJ4B
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 
 config MACH_BERLIN_BG2CD
 	bool "Marvell Armada 1500-mini (BG2CD)"
 	select CACHE_L2X0
-	select CPU_V7
 	select HAVE_ARM_TWD if SMP
 
 endmenu

arch/arm/mach-cns3xxx/Kconfig

 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
 	select ARM_GIC
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
 	help

arch/arm/mach-highbank/Kconfig

@@ -5,7 +5,6 @@ config ARCH_HIGHBANK
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
@@ -14,14 +13,8 @@ config ARCH_HIGHBANK
 	select ARM_PSCI
 	select ARM_TIMER_SP804
 	select CACHE_L2X0
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select MAILBOX
 	select PL320_MBOX
-	select SPARSE_IRQ
-	select USE_OF
 	select ZONE_DMA if ARM_LPAE

arch/arm/mach-hisi/Kconfig

@@ -3,13 +3,9 @@ config ARCH_HI3xxx
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CACHE_L2X0
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SINGLE
 	help

arch/arm/mach-imx/Kconfig

@@ -2,18 +2,11 @@ config ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
-	select ARM_PATCH_PHYS_VIRT
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
-	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select SOC_BUS
-	select SPARSE_IRQ
-	select USE_OF
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -121,7 +114,6 @@ config SOC_IMX31
 config SOC_IMX35
 	bool
 	select ARCH_MXC_IOMUX_V3
-	select CPU_V6K
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
@@ -132,7 +124,6 @@ config SOC_IMX5
 	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_OPP
 	select ARCH_MXC_IOMUX_V3
-	select CPU_V7
 	select MXC_TZIC
 
 config	SOC_IMX51
@@ -792,14 +783,12 @@ config SOC_IMX6Q
 	select ARM_ERRATA_764369 if SMP
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
-	select HAVE_SMP
 	select MFD_SYSCON
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
@@ -817,7 +806,6 @@ config SOC_IMX6SL
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
@@ -833,9 +821,7 @@ config SOC_IMX6SL
 
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
-	select CPU_V7
 	select ARM_GIC
-	select CLKSRC_OF
 	select PINCTRL_VF610
 	select VF_PIT_TIMER
 	select PL310_ERRATA_588369 if CACHE_PL310

arch/arm/mach-keystone/Kconfig

 config ARCH_KEYSTONE
 	bool "Texas Instruments Keystone Devices"
 	depends on ARCH_MULTI_V7
-	select CPU_V7
 	select ARM_GIC
 	select HAVE_ARM_ARCH_TIMER
-	select HAVE_SMP
 	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_ERRATA_798181 if SMP
 	select COMMON_CLK_KEYSTONE
 	select ARCH_SUPPORTS_BIG_ENDIAN

arch/arm/mach-moxart/Kconfig

@@ -2,14 +2,9 @@ config ARCH_MOXART
 	bool "MOXA ART SoC" if ARCH_MULTI_V4T
 	select CPU_FA526
 	select ARM_DMA_MEM_BUFFERABLE
-	select USE_OF
-	select CLKSRC_OF
 	select CLKSRC_MMIO
-	select HAVE_CLK
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select PHYLIB if NETDEVICES
 	help
 	  Say Y here if you want to run your kernel on hardware with a

arch/arm/mach-mvebu/Kconfig

@@ -2,15 +2,10 @@ config ARCH_MVEBU
 	bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
 	select PINCTRL
 	select PLAT_ORION
-	select SPARSE_IRQ
-	select CLKDEV_LOOKUP
 	select MVEBU_MBUS
 	select ZONE_DMA if ARM_LPAE
 	select ARCH_REQUIRE_GPIOLIB
@@ -24,7 +19,6 @@ menu "Marvell SOC with device tree"
 config MACH_ARMADA_370_XP
 	bool
 	select ARMADA_370_XP_TIMER
-	select HAVE_SMP
 	select CACHE_L2X0
 	select CPU_PJ4B
 

arch/arm/mach-mxs/Kconfig

@@ -16,11 +16,7 @@ config ARCH_MXS
 	bool "Freescale MXS (i.MX23, i.MX28) support"
 	depends on ARCH_MULTI_V5
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select HAVE_CLK_PREPARE
 	select PINCTRL
 	select SOC_BUS
 	select SOC_IMX23

arch/arm/mach-nomadik/Kconfig

@@ -6,16 +6,11 @@ config ARCH_NOMADIK
 	select ARM_VIC
 	select CLKSRC_NOMADIK_MTU
 	select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_NOMADIK
 	select PINCTRL_STN8815
-	select SPARSE_IRQ
-	select USE_OF
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 

arch/arm/mach-nspire/Kconfig

@@ -3,14 +3,9 @@ config ARCH_NSPIRE
 	depends on ARCH_MULTI_V4_V5
 	depends on MMU
 	select CPU_ARM926T
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select SPARSE_IRQ
 	select ARM_AMBA
 	select ARM_VIC
 	select ARM_TIMER_SP804
-	select USE_OF
-	select CLKSRC_OF
 	help
 	  This enables support for systems using the TI-NSPIRE CPU

arch/arm/mach-omap2/Kconfig

@@ -6,7 +6,6 @@ config ARCH_OMAP2
 	depends on ARCH_MULTI_V6
 	select ARCH_OMAP2PLUS
 	select CPU_V6
-	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
 
 config ARCH_OMAP3
@@ -15,8 +14,6 @@ config ARCH_OMAP3
 	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
 	select OMAP_INTERCONNECT
 	select PM_OPP if PM
 	select PM_RUNTIME if CPU_IDLE
@@ -33,10 +30,8 @@ config ARCH_OMAP4
 	select ARM_ERRATA_720789
 	select ARM_GIC
 	select CACHE_L2X0
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
@@ -52,10 +47,8 @@ config SOC_OMAP5
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select ARM_ERRATA_798181 if SMP
 
@@ -64,15 +57,11 @@ config SOC_AM33XX
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
 
 config SOC_AM43XX
 	bool "TI AM43x"
 	depends on ARCH_MULTI_V7
-	select CPU_V7
 	select ARCH_OMAP2PLUS
-	select MULTI_IRQ_HANDLER
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
 
@@ -82,8 +71,6 @@ config SOC_DRA7XX
 	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
-	select CPU_V7
-	select HAVE_SMP
 	select HAVE_ARM_ARCH_TIMER
 	select IRQ_CROSSBAR
 
@@ -95,17 +82,13 @@ config ARCH_OMAP2PLUS
 	select ARCH_OMAP
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MACH_OMAP_GENERIC
 	select OMAP_DM_TIMER
 	select PINCTRL
 	select PROC_DEVICETREE if PROC_FS
 	select SOC_BUS
-	select SPARSE_IRQ
 	select TI_PRIV_EDMA
-	select USE_OF
 	help
 	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
 

arch/arm/mach-picoxcell/Kconfig

 config ARCH_PICOXCELL
 	bool "Picochip PicoXcell" if ARCH_MULTI_V6
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select CPU_V6K
 	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select NO_IOPORT
-	select SPARSE_IRQ
-	select USE_OF

arch/arm/mach-prima2/Kconfig

 config ARCH_SIRF
 	bool "CSR SiRF" if ARCH_MULTI_V7
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select PINCTRL
 	select PINCTRL_SIRF
@@ -17,7 +15,6 @@ menu "CSR SiRF atlas6/primaII/Marco/Polo Specific Features"
 config ARCH_ATLAS6
 	bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
 	default y
-	select CPU_V7
 	select SIRF_IRQ
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
@@ -25,7 +22,6 @@ config ARCH_ATLAS6
 config ARCH_PRIMA2
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
 	default y
-	select CPU_V7
 	select SIRF_IRQ
 	select ZONE_DMA
 	help
@@ -35,9 +31,7 @@ config ARCH_MARCO
 	bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
 	default y
 	select ARM_GIC
-	select CPU_V7
 	select HAVE_ARM_SCU if SMP
-	select HAVE_SMP
 	select SMP_ON_UP if SMP
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform

arch/arm/mach-rockchip/Kconfig

@@ -6,9 +6,6 @@ config ARCH_ROCKCHIP
 	select ARM_GIC
 	select CACHE_L2X0
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select DW_APB_TIMER_OF
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK

arch/arm/mach-shmobile/Kconfig

@@ -5,18 +5,13 @@ config ARCH_SHMOBILE_MULTI
 	bool "Renesas ARM SoCs" if ARCH_MULTI_V7
 	depends on MMU
 	select ARCH_SHMOBILE
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select ARM_GIC
-	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select NO_IOPORT
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
 
 if ARCH_SHMOBILE_MULTI
 

arch/arm/mach-socfpga/Kconfig

 config ARCH_SOCFPGA
 	bool "Altera SOCFPGA family" if ARCH_MULTI_V7
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
 	select ARM_GIC
 	select CACHE_L2X0
-	select COMMON_CLK
-	select CPU_V7
 	select DW_APB_TIMER_OF
-	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
 	select MFD_SYSCON
-	select SPARSE_IRQ
-	select USE_OF

arch/arm/mach-spear/Kconfig

@@ -8,8 +8,6 @@ menuconfig PLAT_SPEAR
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select CLKSRC_MMIO
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 
 if PLAT_SPEAR
 
@@ -18,14 +16,10 @@ config ARCH_SPEAR13XX
 	depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
 	select ARCH_HAS_CPUFREQ
 	select ARM_GIC
-	select CPU_V7
 	select GPIO_SPEAR_SPICS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
-	select USE_OF
 	help
 	  Supports for ARM's SPEAR13XX family
 
@@ -50,9 +44,7 @@ config ARCH_SPEAR3XX
 	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
-	select CPU_ARM926T
 	select PINCTRL
-	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family
 
@@ -83,14 +75,12 @@ config ARCH_SPEAR6XX
 	depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
 	depends on !ARCH_SPEAR13XX
 	select ARM_VIC
-	select CPU_ARM926T
 	help
 	  Supports for ARM's SPEAR6XX family
 
 config MACH_SPEAR600
 	def_bool y
 	depends on ARCH_SPEAR6XX
-	select USE_OF
 	help
 	  Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
 

arch/arm/mach-sti/Kconfig

 menuconfig ARCH_STI
 	bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
-	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
 	select ARM_GIC
 	select ARM_GLOBAL_TIMER
 	select PINCTRL
 	select PINCTRL_ST
 	select MFD_SYSCON
 	select ARCH_HAS_RESET_CONTROLLER
-	select MIGHT_HAVE_CACHE_L2X0
-	select HAVE_SMP
 	select HAVE_ARM_SCU if SMP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_ERRATA_754322

arch/arm/mach-sunxi/Kconfig

@@ -5,14 +5,9 @@ config ARCH_SUNXI
 	select ARM_GIC
 	select ARM_PSCI
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select HAVE_SMP
 	select PINCTRL
 	select PINCTRL_SUNXI
 	select RESET_CONTROLLER
-	select SPARSE_IRQ
 	select SUN4I_TIMER
 	select SUN5I_HSTIMER

arch/arm/mach-tegra/Kconfig

@@ -5,24 +5,16 @@ config ARCH_TEGRA
 	select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
 	select ARM_GIC
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PINCTRL
 	select ARCH_HAS_RESET_CONTROLLER
 	select RESET_CONTROLLER
 	select SOC_BUS
-	select SPARSE_IRQ
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select USB_ULPI if USB_PHY
 	select USB_ULPI_VIEWPORT if USB_PHY
-	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems.
 

arch/arm/mach-u300/Kconfig

@@ -3,20 +3,14 @@ config ARCH_U300
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
 	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select PINCTRL
 	select PINCTRL_COH901
 	select PINCTRL_U300
-	select SPARSE_IRQ
 	select MFD_SYSCON
-	select USE_OF
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 

arch/arm/mach-ux500/Kconfig

@@ -11,13 +11,8 @@ config ARCH_U8500
 	select ARM_GIC
 	select CACHE_L2X0
 	select CLKSRC_NOMADIK_MTU
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_ABX500
 	select PINCTRL_NOMADIK
@@ -76,7 +71,6 @@ config UX500_AUTO_PLATFORM
 config MACH_UX500_DT
 	bool "Generic U8500 support using device tree"
 	depends on MACH_MOP500
-	select USE_OF
 
 endmenu
 

arch/arm/mach-vexpress/Kconfig

@@ -5,16 +5,11 @@ config ARCH_VEXPRESS
 	select ARM_AMBA
 	select ARM_GIC
 	select ARM_TIMER_SP804
-	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
-	select HAVE_SMP
 	select ICST
-	select MIGHT_HAVE_CACHE_L2X0
 	select NO_IOPORT
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD

arch/arm/mach-virt/Kconfig

-config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_GIC
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_PSCI
-	select HAVE_SMP
-	select CPU_V7
-	select SPARSE_IRQ
-	select USE_OF

arch/arm/mach-virt/Makefile

-#
-# Makefile for the linux kernel.
-#
-
-obj-y					:= virt.o

arch/arm/mach-virt/virt.c

-/*
- * Dummy Virtual Machine - does what it says on the tin.
- *
- * Copyright (C) 2012 ARM Ltd
- * Authors: Will Deacon <will.deacon@arm.com>,
- *          Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/smp.h>
-
-#include <asm/mach/arch.h>
-
-static void __init virt_init(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *virt_dt_match[] = {
-	"linux,dummy-virt",
-	"xen,xenvm",
-	NULL
-};
-
-DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
-	.init_machine	= virt_init,
-	.dt_compat	= virt_dt_match,
-MACHINE_END

arch/arm/mach-vt8500/Kconfig

@@ -3,8 +3,6 @@ config ARCH_VT8500
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
 	select VT8500_TIMER
 	select PINCTRL
 	help
@@ -21,7 +19,6 @@ config ARCH_WM8750
 	bool "WonderMedia WM8750"
 	depends on ARCH_MULTI_V6
 	select ARCH_VT8500
-	select CPU_V6
 	help
 	  Support for WonderMedia WM8750 System-on-Chip.
 
@@ -29,6 +26,5 @@ config ARCH_WM8850
 	bool "WonderMedia WM8850"
 	depends on ARCH_MULTI_V7
 	select ARCH_VT8500
-	select CPU_V7
 	help
 	  Support for WonderMedia WM8850 System-on-Chip.

arch/arm/mach-zynq/Kconfig

@@ -2,16 +2,9 @@ config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
-	select COMMON_CLK
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select ICST
-	select MIGHT_HAVE_CACHE_L2X0
-	select USE_OF
-	select HAVE_SMP
-	select SPARSE_IRQ
 	select CADENCE_TTC_TIMER
 	select ARM_GLOBAL_TIMER
 	help