[ATM]: Forward port br2864 to 2.5.x

include/linux/atmbr2684.h

+#ifndef _LINUX_ATMBR2684_H
+#define _LINUX_ATMBR2684_H
+
+#include <linux/atm.h>
+#include <linux/if.h>		/* For IFNAMSIZ */
+
+/*
+ * Type of media we're bridging (ethernet, token ring, etc)  Currently only
+ * ethernet is supported
+ */
+#define BR2684_MEDIA_ETHERNET	(0)	/* 802.3 */
+#define BR2684_MEDIA_802_4	(1)	/* 802.4 */
+#define BR2684_MEDIA_TR		(2)	/* 802.5 - token ring */
+#define BR2684_MEDIA_FDDI	(3)
+#define BR2684_MEDIA_802_6	(4)	/* 802.6 */
+
+/*
+ * Is there FCS inbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSIN_NO		(0)
+#define BR2684_FCSIN_IGNORE	(1)
+#define BR2684_FCSIN_VERIFY	(2)
+
+/*
+ * Is there FCS outbound on this VC?  This currently isn't supported.
+ */
+#define BR2684_FCSOUT_NO	(0)
+#define BR2684_FCSOUT_SENDZERO	(1)
+#define BR2684_FCSOUT_GENERATE	(2)
+
+/*
+ * Does this VC include LLC encapsulation?
+ */
+#define BR2684_ENCAPS_VC	(0)	/* VC-mux */
+#define BR2684_ENCAPS_LLC	(1)
+#define BR2684_ENCAPS_AUTODETECT (2)	/* Unsuported */
+
+/*
+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_newif_br2684 {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
+	int		media;		/* BR2684_MEDIA_* */
+	char		ifname[IFNAMSIZ];
+	int		mtu;
+};
+
+/*
+ * This structure is used to specify a br2684 interface - either by a
+ * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name
+ */
+#define BR2684_FIND_BYNOTHING	(0)
+#define BR2684_FIND_BYNUM	(1)
+#define BR2684_FIND_BYIFNAME	(2)
+struct br2684_if_spec {
+	int method;			/* BR2684_FIND_* */
+	union {
+		char		ifname[IFNAMSIZ];
+		int		devnum;
+	} spec;
+};
+
+/*
+ * This is for the ATM_SETBACKEND call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+struct atm_backend_br2684 {
+	atm_backend_t	backend_num;	/* ATM_BACKEND_BR2684 */
+	struct br2684_if_spec ifspec;
+	int	fcs_in;		/* BR2684_FCSIN_* */
+	int	fcs_out;	/* BR2684_FCSOUT_* */
+	int	fcs_auto;	/* 1: fcs_{in,out} disabled if no FCS rx'ed */
+	int	encaps;		/* BR2684_ENCAPS_* */
+	int	has_vpiid;	/* 1: use vpn_id - Unsupported */
+	__u8	vpn_id[7];
+	int	send_padding;	/* unsupported */
+	int	min_size;	/* we will pad smaller packets than this */
+};
+
+/*
+ * The BR2684_SETFILT ioctl is an experimental mechanism for folks
+ * terminating a large number of IP-only vcc's.  When netfilter allows
+ * efficient per-if in/out filters, this support will be removed
+ */
+struct br2684_filter {
+	__u32	prefix;		/* network byte order */
+	__u32	netmask;	/* 0 = disable filter */
+};
+
+struct br2684_filter_set {
+	struct br2684_if_spec ifspec;
+	struct br2684_filter filter;
+};
+
+#define BR2684_SETFILT	_IOW( 'a', ATMIOC_BACKEND + 0, \
+				struct br2684_filter_set)
+
+#endif /* _LINUX_ATMBR2684_H */

include/linux/atmdev.h

@@ -96,6 +96,8 @@ struct atm_dev_stats {
 					/* enable or disable single-copy */
 #define ATM_SETBACKEND	_IOW('a',ATMIOC_SPECIAL+2,atm_backend_t)
 					/* set backend handler */
+#define ATM_NEWBACKENDIF _IOW('a',ATMIOC_SPECIAL+3,atm_backend_t)
+					/* use backend to make new if */
 
 /*
  * These are backend handkers that can be set via the ATM_SETBACKEND call
@@ -104,7 +106,7 @@ struct atm_dev_stats {
  */
 #define ATM_BACKEND_RAW		0	
 #define ATM_BACKEND_PPP		1	/* PPPoATM - RFC2364 */
-#define ATM_BACKEND_BR_2684	2	/* Bridged RFC1483/2684 */
+#define ATM_BACKEND_BR2684	2	/* Bridged RFC1483/2684 */
 
 /* for ATM_GETTYPE */
 #define ATM_ITFTYP_LEN	8	/* maximum length of interface type name */

net/Kconfig

@@ -266,6 +266,23 @@ config ATM_MPOA
 	  subnetwork boundaries. These shortcut connections bypass routers
 	  enhancing overall network performance.
 
+config ATM_BR2684
+	tristate "RFC1483/2684 Bridged protocols"
+	depends on ATM && INET
+	help
+	  ATM PVCs can carry ethernet PDUs according to rfc2684 (formerly 1483)
+	  This device will act like an ethernet from the kernels point of view,
+	  with the traffic being carried by ATM PVCs (currently 1 PVC/device).
+	  This is sometimes used over DSL lines.  If in doubt, say N.
+
+config ATM_BR2684_IPFILTER
+	bool "Per-VC IP filter kludge"
+	depends on ATM_BR2684
+	help
+	  This is an experimental mechanism for users who need to terminating a
+	  large number of IP-only vcc's.  Do not enable this unless you are sure
+	  you know what you are doing.
+
 config VLAN_8021Q
 	tristate "802.1Q VLAN Support"
 

net/atm/Makefile

@@ -7,6 +7,7 @@ mpoa-objs	:= mpc.o mpoa_caches.o mpoa_proc.o
 obj-$(CONFIG_ATM) := addr.o pvc.o signaling.o svc.o common.o atm_misc.o raw.o resources.o
 
 obj-$(CONFIG_ATM_CLIP) += clip.o ipcommon.o
+obj-$(CONFIG_ATM_BR2684) += br2684.o ipcommon.o
 obj-$(CONFIG_NET_SCH_ATM) += ipcommon.o
 obj-$(CONFIG_PROC_FS) += proc.o
 

net/atm/common.c

@@ -62,6 +62,13 @@ int (*pppoatm_ioctl_hook)(struct atm_vcc *, unsigned int, unsigned long);
 EXPORT_SYMBOL(pppoatm_ioctl_hook);
 #endif
 
+#if defined(CONFIG_ATM_BR2684) || defined(CONFIG_ATM_BR2684_MODULE)
+int (*br2684_ioctl_hook)(struct atm_vcc *, unsigned int, unsigned long);
+#ifdef CONFIG_ATM_BR2684_MODULE
+EXPORT_SYMBOL(br2684_ioctl_hook);
+#endif
+#endif
+
 #include "resources.h"		/* atm_find_dev */
 #include "common.h"		/* prototypes */
 #include "protocols.h"		/* atm_init_<transport> */
@@ -784,6 +791,13 @@ int atm_ioctl(struct socket *sock,unsigned int cmd,unsigned long arg)
 		if (ret_val != -ENOIOCTLCMD)
 			goto done;
 	}
+#endif
+#if defined(CONFIG_ATM_BR2684) || defined(CONFIG_ATM_BR2684_MODULE)
+	if (br2684_ioctl_hook) {
+		ret_val = br2684_ioctl_hook(vcc, cmd, arg);
+		if (ret_val != -ENOIOCTLCMD)
+			goto done;
+	}
 #endif
 	if (get_user(buf,&((struct atmif_sioc *) arg)->arg)) {
 		ret_val = -EFAULT;