Merge samba.org:/home/paulus/kernel/linux-2.5

into samba.org:/home/paulus/kernel/for-linus-ppc

arch/ppc/configs/lopec_defconfig

 #
-# Automatically generated by make menuconfig: don't edit
+# Automatically generated make config: don't edit
 #
 # CONFIG_UID16 is not set
 # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+
 #
 # Loadable module support
 #
@@ -23,7 +32,7 @@ CONFIG_KMOD=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_6xx=y
-# CONFIG_4xx is not set
+# CONFIG_40x is not set
 # CONFIG_POWER3 is not set
 # CONFIG_8xx is not set
 # CONFIG_PPC_ISERIES is not set
@@ -31,49 +40,58 @@ CONFIG_6xx=y
 CONFIG_PPC_STD_MMU=y
 # CONFIG_ALL_PPC is not set
 # CONFIG_APUS is not set
-# CONFIG_SPRUCE is not set
+# CONFIG_WILLOW is not set
 # CONFIG_PCORE is not set
+# CONFIG_POWERPMC250 is not set
+# CONFIG_EV64260 is not set
+# CONFIG_SPRUCE is not set
 # CONFIG_MENF1 is not set
 CONFIG_LOPEC=y
 # CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
+# CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
+# CONFIG_ADIR is not set
 # CONFIG_K2 is not set
 # CONFIG_GEMINI is not set
 # CONFIG_ZX4500 is not set
-# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_EPIC_SERIAL_MODE=y
 # CONFIG_SMP is not set
-# CONFIG_ALTIVEC is not set
+# CONFIG_PREEMPT is not set
+CONFIG_ALTIVEC=y
 # CONFIG_TAU is not set
 
 #
 # General setup
 #
 # CONFIG_HIGHMEM is not set
+# CONFIG_HIGHPTE is not set
+# CONFIG_ADVANCED_OPTIONS is not set
 # CONFIG_ISA is not set
 # CONFIG_EISA is not set
 # CONFIG_SBUS is not set
 # CONFIG_MCA is not set
 CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_SYSCTL=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_KCORE_ELF=y
 CONFIG_BINFMT_ELF=y
 CONFIG_KERNEL_ELF=y
 CONFIG_BINFMT_MISC=m
-# CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_PCI_NAMES=y
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
 # CONFIG_PCMCIA is not set
 
 #
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
-# CONFIG_PPC_RTC is not set
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="ip=on"
 
 #
 # Memory Technology Devices (MTD)
@@ -91,15 +109,17 @@ CONFIG_BINFMT_MISC=m
 # Block devices
 #
 # CONFIG_BLK_DEV_FD is not set
-# CONFIG_VIODASD is not set
 # CONFIG_BLK_DEV_XD is not set
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_INITRD is not set
 
 #
@@ -111,6 +131,7 @@ CONFIG_BINFMT_MISC=m
 # CONFIG_MD_RAID0 is not set
 # CONFIG_MD_RAID1 is not set
 # CONFIG_MD_RAID5 is not set
+# CONFIG_MD_MULTIPATH is not set
 # CONFIG_BLK_DEV_LVM is not set
 
 #
@@ -118,11 +139,8 @@ CONFIG_BINFMT_MISC=m
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK=y
-# CONFIG_RTNETLINK is not set
 # CONFIG_NETLINK_DEV is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_FILTER is not set
 CONFIG_UNIX=y
 CONFIG_INET=y
@@ -130,27 +148,29 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 CONFIG_SYN_COOKIES=y
-
-#
-#   IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
 # CONFIG_IPV6 is not set
 # CONFIG_KHTTPD is not set
 # CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+
+#
+#  
+#
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# Appletalk devices
+#
+# CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
@@ -170,22 +190,97 @@ CONFIG_SYN_COOKIES=y
 #
 # ATA/IDE/MFM/RLL support
 #
-# CONFIG_IDE is not set
-# CONFIG_BLK_DEV_IDE_MODES is not set
+CONFIG_IDE=y
+
+#
+# ATA and ATAPI Block devices
+#
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_HD_IDE is not set
 # CONFIG_BLK_DEV_HD is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_IDEDISK_STROKE is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+
+#
+# ATA host chip set support
+#
+# CONFIG_BLK_DEV_CMD640 is not set
+# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
+# CONFIG_BLK_DEV_ISAPNP is not set
+# CONFIG_BLK_DEV_RZ1000 is not set
+
+#
+#   PCI host chip set support
+#
+# CONFIG_BLK_DEV_OFFBOARD is not set
+# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_IDEDMA_ONLYDISK=y
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_IDE_TCQ is not set
+# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
+# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_AEC6280_BURST is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_WDC_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_HPT34X_AUTODMA is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_PDC202XX is not set
+# CONFIG_PDC202XX_BURST is not set
+# CONFIG_PDC202XX_FORCE is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIS5513 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_SL82C105=y
+# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_ATAPI=y
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_ATARAID is not set
+# CONFIG_BLK_DEV_ATARAID_PDC is not set
+# CONFIG_BLK_DEV_ATARAID_HPT is not set
 
 #
 # SCSI support
 #
 CONFIG_SCSI=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
 CONFIG_BLK_DEV_SD=y
 CONFIG_SD_EXTRA_DEVS=40
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
-# CONFIG_SCSI_DEBUG_QUEUES is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
 # CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_REPORT_LUNS is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
 
@@ -195,11 +290,9 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_7000FASST is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AHA1740 is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_AM53C974 is not set
@@ -218,15 +311,11 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_NCR53C7xx is not set
-# CONFIG_SCSI_NCR53C8XX is not set
-CONFIG_SCSI_SYM53C8XX=y
-CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
-CONFIG_SCSI_NCR53C8XX_SYNC=20
-# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set
-# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PCI2000 is not set
 # CONFIG_SCSI_PCI2220I is not set
@@ -235,20 +324,32 @@ CONFIG_SCSI_NCR53C8XX_SYNC=20
 # CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_SIM710 is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_MESH is not set
-# CONFIG_SCSI_MAC53C94 is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support (EXPERIMENTAL)
 #
 # CONFIG_IEEE1394 is not set
 
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
 #
 # Network device support
 #
@@ -258,7 +359,7 @@ CONFIG_NETDEVICES=y
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
@@ -268,17 +369,13 @@ CONFIG_NETDEVICES=y
 # Ethernet (10 or 100Mbit)
 #
 CONFIG_NET_ETHERNET=y
-# CONFIG_ARM_AM79C961A is not set
 # CONFIG_MACE is not set
 # CONFIG_BMAC is not set
-# CONFIG_GMAC is not set
-# CONFIG_NCR885E is not set
 # CONFIG_OAKNET is not set
 # CONFIG_SUNLANCE is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNBMAC is not set
 # CONFIG_SUNQE is not set
-# CONFIG_SUNLANCE is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_LANCE is not set
@@ -291,42 +388,41 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_APRICOT is not set
 # CONFIG_CS89x0 is not set
-# CONFIG_TULIP is not set
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_DE4X5 is not set
 # CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-CONFIG_EEPRO100=y
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
 # CONFIG_LNE390 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_NE3210 is not set
 # CONFIG_ES3210 is not set
+# CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_NEW_RX_RESET is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_WINBOND_840 is not set
+# CONFIG_VIA_RHINE_MMIO is not set
 # CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
 #
 # CONFIG_ACENIC is not set
-# CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
 # CONFIG_MYRI_SBUS is not set
+# CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_SK98LIN is not set
-# CONFIG_VETH is not set
+# CONFIG_TIGON3 is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
@@ -351,6 +447,11 @@ CONFIG_EEPRO100=y
 #
 # CONFIG_WAN is not set
 
+#
+# Tulip family network device support
+#
+# CONFIG_NET_TULIP is not set
+
 #
 # Amateur Radio support
 #
@@ -364,7 +465,7 @@ CONFIG_EEPRO100=y
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -379,12 +480,86 @@ CONFIG_EEPRO100=y
 #
 # Frame-buffer support
 #
-# CONFIG_FB is not set
-
-#
-# Input core support
-#
-# CONFIG_INPUT is not set
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FB_CLGEN is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S3TRIO is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+# CONFIG_FB_MATROX_MYSTIQUE is not set
+# CONFIG_FB_MATROX_G100 is not set
+# CONFIG_FB_MATROX_G450 is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FBCON_ADVANCED is not set
+CONFIG_FBCON_CFB8=y
+CONFIG_FBCON_CFB16=y
+CONFIG_FBCON_CFB24=y
+CONFIG_FBCON_CFB32=y
+# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
+# CONFIG_FBCON_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Input device support
+#
+CONFIG_INPUT=m
+CONFIG_INPUT_KEYBDEV=m
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_INPUT_EMU10K1 is not set
+# CONFIG_GAMEPORT_PCIGAME is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+# CONFIG_SERIO is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
 
 #
 # Macintosh device drivers
@@ -393,14 +568,14 @@ CONFIG_EEPRO100=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
 CONFIG_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 # CONFIG_SERIAL_EXTENDED is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_UNIX98_PTY_COUNT=256
-# CONFIG_VIOCONS is not set
 
 #
 # I2C support
@@ -412,13 +587,7 @@ CONFIG_UNIX98_PTY_COUNT=256
 #
 # CONFIG_BUSMOUSE is not set
 # CONFIG_MOUSE is not set
-
-#
-# Joysticks
-#
-# CONFIG_JOYSTICK is not set
 # CONFIG_QIC02_TAPE is not set
-# CONFIG_VIOTAPE is not set
 
 #
 # Watchdog Cards
@@ -427,10 +596,11 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_SONYPI is not set
 
 #
 # Ftape, the floppy tape device driver
@@ -442,32 +612,71 @@ CONFIG_UNIX98_PTY_COUNT=256
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+CONFIG_VIDEO_PROC_FS=y
+# CONFIG_I2C_PARPORT is not set
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZORAN_BUZ is not set
+# CONFIG_VIDEO_ZORAN_DC10 is not set
+# CONFIG_VIDEO_ZORAN_LML33 is not set
+# CONFIG_VIDEO_ZR36120 is not set
+# CONFIG_VIDEO_MEYE is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
 
 #
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
 # CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_FAT_FS is not set
 # CONFIG_MSDOS_FS is not set
 # CONFIG_UMSDOS_FS is not set
 # CONFIG_VFAT_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
+CONFIG_RAMFS=y
 # CONFIG_ISO9660_FS is not set
 # CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
@@ -481,7 +690,7 @@ CONFIG_DEVPTS_FS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_QNX4FS_RW is not set
 # CONFIG_ROMFS_FS is not set
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UDF_FS is not set
 # CONFIG_UDF_RW is not set
@@ -492,14 +701,17 @@ CONFIG_DEVPTS_FS=y
 # Network File Systems
 #
 # CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 # CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
 CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -510,6 +722,7 @@ CONFIG_LOCKD_V4=y
 # CONFIG_NCPFS_SMALLDOS is not set
 # CONFIG_NCPFS_NLS is not set
 # CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
 
 #
 # Partition Types
@@ -527,49 +740,152 @@ CONFIG_MSDOS_PARTITION=y
 #
 # USB support
 #
-CONFIG_USB=y
+CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
 CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_LONG_TIMEOUT is not set
 # CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-CONFIG_USB_OHCI=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD_ALT is not set
+
+#
+# USB Device Class drivers
+#
 # CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_ACM is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_ACM=m
 # CONFIG_USB_PRINTER is not set
-# CONFIG_USB_DC2XX is not set
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDDEV is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+
+#
+# USB Imaging devices
+#
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
+CONFIG_USB_SCANNER=m
 # CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
 # CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
 # CONFIG_USB_OV511 is not set
 # CONFIG_USB_PWC is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_PLUSB is not set
-# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_SE401=m
+# CONFIG_USB_STV680 is not set
+
+#
+# USB Network adaptors
+#
 # CONFIG_USB_CATC is not set
-# CONFIG_USB_NET1080 is not set
+# CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
 # CONFIG_USB_USS720 is not set
 
 #
 # USB Serial Converter support
 #
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+CONFIG_USB_SERIAL_VISOR=m
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
+# CONFIG_USB_BRLVGER is not set
 
 #
 # Bluetooth support
 #
 # CONFIG_BLUEZ is not set
 
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+# CONFIG_ZLIB_INFLATE is not set
+# CONFIG_ZLIB_DEFLATE is not set
+
 #
 # Kernel hacking
 #
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_KGDB is not set
-CONFIG_XMON=y
+# CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set

arch/ppc/configs/sandpoint_defconfig

@@ -4,17 +4,26 @@
 # CONFIG_UID16 is not set
 # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_HAVE_DEC_LOCK=y
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
 
+#
+# General setup
+#
+CONFIG_NET=y
+CONFIG_SYSVIPC=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+
 #
 # Loadable module support
 #
 CONFIG_MODULES=y
-CONFIG_MODVERSIONS=y
+# CONFIG_MODVERSIONS is not set
 CONFIG_KMOD=y
 
 #
@@ -23,7 +32,7 @@ CONFIG_KMOD=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_6xx=y
-# CONFIG_4xx is not set
+# CONFIG_40x is not set
 # CONFIG_POWER3 is not set
 # CONFIG_8xx is not set
 # CONFIG_PPC_ISERIES is not set
@@ -31,25 +40,29 @@ CONFIG_6xx=y
 CONFIG_PPC_STD_MMU=y
 # CONFIG_ALL_PPC is not set
 # CONFIG_APUS is not set
-# CONFIG_SPRUCE is not set
+# CONFIG_WILLOW is not set
 # CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
+# CONFIG_EV64260 is not set
+# CONFIG_SPRUCE is not set
 # CONFIG_MENF1 is not set
 # CONFIG_LOPEC is not set
 # CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
+# CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 CONFIG_SANDPOINT=y
 # CONFIG_ADIR is not set
 # CONFIG_K2 is not set
+# CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
-# CONFIG_WILLOW is not set
 # CONFIG_ZX4500 is not set
-# CONFIG_MPC10X_STORE_GATHERING is not set
 CONFIG_SANDPOINT_X3=y
 CONFIG_EPIC_SERIAL_MODE=y
+# CONFIG_MPC10X_STORE_GATHERING is not set
 # CONFIG_SMP is not set
+# CONFIG_PREEMPT is not set
 CONFIG_ALTIVEC=y
 # CONFIG_TAU is not set
 
@@ -57,28 +70,28 @@ CONFIG_ALTIVEC=y
 # General setup
 #
 # CONFIG_HIGHMEM is not set
+# CONFIG_ADVANCED_OPTIONS is not set
 # CONFIG_ISA is not set
 # CONFIG_EISA is not set
 # CONFIG_SBUS is not set
 # CONFIG_MCA is not set
 CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_SYSCTL=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_KCORE_ELF=y
 CONFIG_BINFMT_ELF=y
 CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_MISC=y
+CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_NAMES is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
+
+#
+# PCMCIA/CardBus support
+#
 # CONFIG_PCMCIA is not set
 
 #
 # Parallel port support
 #
 # CONFIG_PARPORT is not set
-CONFIG_PPC_RTC=y
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -91,6 +104,7 @@ CONFIG_PPC_RTC=y
 #
 # CONFIG_PNP is not set
 # CONFIG_ISAPNP is not set
+# CONFIG_PNPBIOS is not set
 
 #
 # Block devices
@@ -100,7 +114,9 @@ CONFIG_PPC_RTC=y
 # CONFIG_PARIDE is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_CISS_SCSI_TAPE is not set
 # CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
@@ -124,14 +140,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-CONFIG_NETLINK=y
-# CONFIG_RTNETLINK is not set
 # CONFIG_NETLINK_DEV is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_FILTER is not set
 CONFIG_UNIX=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_PNP=y
 # CONFIG_IP_PNP_DHCP is not set
@@ -139,10 +153,11 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 # CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_IPV6 is not set
-# CONFIG_KHTTPD is not set
 # CONFIG_ATM is not set
 # CONFIG_VLAN_8021Q is not set
 
@@ -151,6 +166,11 @@ CONFIG_IP_PNP_BOOTP=y
 #
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
+
+#
+# Appletalk devices
+#
+# CONFIG_DEV_APPLETALK is not set
 # CONFIG_DECNET is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_X25 is not set
@@ -171,50 +191,51 @@ CONFIG_IP_PNP_BOOTP=y
 # ATA/IDE/MFM/RLL support
 #
 CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
 CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
 # CONFIG_BLK_DEV_HD_IDE is not set
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_IDEDISK_STROKE is not set
+CONFIG_ATAPI=y
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_BLK_DEV_IDECS is not set
 
 #
-# IDE chipset support/bugfixes
+# ATA host controller support
 #
+# CONFIG_BLK_DEV_RZ1000 is not set
 # CONFIG_BLK_DEV_CMD640 is not set
 # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
 # CONFIG_BLK_DEV_ISAPNP is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
+
+#
+#   PCI host controller support
+#
+# CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_IDEDMA_PCI_AUTO is not set
+# CONFIG_IDEDMA_ONLYDISK is not set
 CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_IDE_TCQ is not set
+# CONFIG_BLK_DEV_IDE_TCQ_DEFAULT is not set
 # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_AEC62XX_TUNING is not set
+# CONFIG_AEC6280_BURST is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_WDC_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_AMD74XX_OVERRIDE is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_HPT34X_AUTODMA is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_PDC202XX is not set
@@ -226,9 +247,8 @@ CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_IDE_CHIPSETS is not set
-# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_IDEDMA_IVB is not set
-CONFIG_BLK_DEV_IDE_MODES=y
+# CONFIG_IDEDMA_AUTO is not set
 # CONFIG_BLK_DEV_ATARAID is not set
 # CONFIG_BLK_DEV_ATARAID_PDC is not set
 # CONFIG_BLK_DEV_ATARAID_HPT is not set
@@ -238,11 +258,30 @@ CONFIG_BLK_DEV_IDE_MODES=y
 #
 # CONFIG_SCSI is not set
 
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_BOOT is not set
+# CONFIG_FUSION_ISENSE is not set
+# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LAN is not set
+
 #
 # IEEE 1394 (FireWire) support (EXPERIMENTAL)
 #
 # CONFIG_IEEE1394 is not set
 
+#
+# I2O device support
+#
+# CONFIG_I2O is not set
+# CONFIG_I2O_PCI is not set
+# CONFIG_I2O_BLOCK is not set
+# CONFIG_I2O_LAN is not set
+# CONFIG_I2O_SCSI is not set
+# CONFIG_I2O_PROC is not set
+
 #
 # Network device support
 #
@@ -252,7 +291,7 @@ CONFIG_NETDEVICES=y
 # ARCnet devices
 #
 # CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
+CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
@@ -264,14 +303,20 @@ CONFIG_NETDEVICES=y
 CONFIG_NET_ETHERNET=y
 # CONFIG_MACE is not set
 # CONFIG_BMAC is not set
-# CONFIG_GMAC is not set
+# CONFIG_OAKNET is not set
 # CONFIG_SUNLANCE is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNBMAC is not set
 # CONFIG_SUNQE is not set
-# CONFIG_SUNLANCE is not set
 # CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+# CONFIG_ELMC is not set
+# CONFIG_ELMC_II is not set
+CONFIG_VORTEX=y
 # CONFIG_LANCE is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -282,13 +327,9 @@ CONFIG_NET_PCI=y
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_APRICOT is not set
 # CONFIG_CS89x0 is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_DE4X5 is not set
 # CONFIG_DGRS is not set
-# CONFIG_DM9102 is not set
-CONFIG_EEPRO100=y
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
 # CONFIG_LNE390 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -300,12 +341,13 @@ CONFIG_EEPRO100=y
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
+# CONFIG_8139_NEW_RX_RESET is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-# CONFIG_WINBOND_840 is not set
+# CONFIG_VIA_RHINE_MMIO is not set
 # CONFIG_NET_POCKET is not set
 
 #
@@ -313,15 +355,24 @@ CONFIG_EEPRO100=y
 #
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_TIGON3 is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
 
 #
@@ -342,6 +393,18 @@ CONFIG_EEPRO100=y
 #
 # CONFIG_WAN is not set
 
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+# CONFIG_TULIP_MMIO is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+
 #
 # Amateur Radio support
 #
@@ -355,12 +418,7 @@ CONFIG_EEPRO100=y
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
+# CONFIG_ISDN_BOOL is not set
 
 #
 # Console drivers
@@ -370,16 +428,129 @@ CONFIG_EEPRO100=y
 #
 # Frame-buffer support
 #
-# CONFIG_FB is not set
+CONFIG_FB=y
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FB_CLGEN is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S3TRIO is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+# CONFIG_FB_MATROX_MYSTIQUE is not set
+# CONFIG_FB_MATROX_G100 is not set
+# CONFIG_FB_MATROX_G450 is not set
+# CONFIG_FB_MATROX_MULTIHEAD is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FBCON_ADVANCED is not set
+CONFIG_FBCON_CFB8=y
+CONFIG_FBCON_CFB16=y
+CONFIG_FBCON_CFB24=y
+CONFIG_FBCON_CFB32=y
+CONFIG_FBCON_FONTWIDTH8_ONLY=y
+# CONFIG_FBCON_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
 
 #
-# Input core support
+# Userland interfaces
 #
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_KEYBDEV is not set
-# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_KEYBDEV=y
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
+# CONFIG_GAMEPORT_EMU10K1 is not set
+# CONFIG_GAMEPORT_VORTEX is not set
+# CONFIG_GAMEPORT_FM801 is not set
+# CONFIG_GAMEPORT_CS461x is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_I8042_REG_BASE=60
+CONFIG_I8042_KBD_IRQ=1
+CONFIG_I8042_AUX_IRQ=12
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PARKBD is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDDLER is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+# CONFIG_INPUT_JOYDUMP is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
 
 #
 # Macintosh device drivers
@@ -388,46 +559,51 @@ CONFIG_EEPRO100=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
-CONFIG_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_SERIAL_EXTENDED is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
 # CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
 
 #
-# I2C support
-#
-# CONFIG_I2C is not set
-
+# Serial drivers
 #
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_MOUSE is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+# CONFIG_SERIAL_8250_SHARE_IRQ is not set
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
-# Joysticks
+# Non-8250 serial port support
 #
-# CONFIG_INPUT_GAMEPORT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_UNIX98_PTY_COUNT=256
 
 #
-# Input core support is needed for gameports
+# I2C support
 #
+# CONFIG_I2C is not set
 
 #
-# Input core support is needed for joysticks
+# Mice
 #
+# CONFIG_BUSMOUSE is not set
+CONFIG_PSMOUSE=y
 # CONFIG_QIC02_TAPE is not set
 
 #
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_INTEL_RNG is not set
 # CONFIG_NVRAM is not set
 # CONFIG_RTC is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -438,25 +614,59 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_FTAPE is not set
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
+CONFIG_RAW_DRIVER=m
 
 #
 # Multimedia devices
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+CONFIG_VIDEO_PROC_FS=y
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+# CONFIG_VIDEO_ZORAN_BUZ is not set
+# CONFIG_VIDEO_ZORAN_DC10 is not set
+# CONFIG_VIDEO_ZORAN_LML33 is not set
+# CONFIG_VIDEO_ZR36120 is not set
+# CONFIG_VIDEO_MEYE is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_GEMTEK_PCI is not set
+# CONFIG_RADIO_MAXIRADIO is not set
+# CONFIG_RADIO_MAESTRO is not set
 
 #
 # File systems
 #
 # CONFIG_QUOTA is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_ADFS_FS is not set
 # CONFIG_ADFS_FS_RW is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
 # CONFIG_BFS_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+# CONFIG_JBD_DEBUG is not set
 # CONFIG_FAT_FS is not set
 # CONFIG_MSDOS_FS is not set
 # CONFIG_UMSDOS_FS is not set
@@ -466,9 +676,13 @@ CONFIG_UNIX98_PTY_COUNT=256
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 CONFIG_TMPFS=y
-# CONFIG_RAMFS is not set
+CONFIG_RAMFS=y
 CONFIG_ISO9660_FS=y
 # CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_NTFS_FS is not set
@@ -493,13 +707,17 @@ CONFIG_EXT2_FS=y
 # Network File Systems
 #
 # CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
 CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 # CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_TCP is not set
 CONFIG_SUNRPC=y
 CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+# CONFIG_EXPORTFS is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_NCPFS_PACKET_SIGNING is not set
@@ -510,12 +728,27 @@ CONFIG_LOCKD=y
 # CONFIG_NCPFS_SMALLDOS is not set
 # CONFIG_NCPFS_NLS is not set
 # CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_ZISOFS_FS is not set
 
 #
 # Partition Types
 #
-# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
 # CONFIG_SMB_NLS is not set
 # CONFIG_NLS is not set
 
@@ -527,20 +760,36 @@ CONFIG_MSDOS_PARTITION=y
 #
 # USB support
 #
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_LONG_TIMEOUT is not set
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
 
 #
-# USB Controllers
+# USB Host Controller Drivers
 #
-# CONFIG_USB_UHCI is not set
-# CONFIG_USB_UHCI_ALT is not set
-# CONFIG_USB_OHCI is not set
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD_ALT=m
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_AUDIO is not set
-# CONFIG_USB_BLUETOOTH is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+
+#
+#   SCSI support is needed for USB Storage
+#
 # CONFIG_USB_STORAGE is not set
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
@@ -549,42 +798,52 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_HP8200e is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
 
 #
 # USB Human Interface Devices (HID)
 #
-
-#
-#   Input core support is needed for USB HID
-#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
+# CONFIG_LOGITECH_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_XPAD is not set
 
 #
 # USB Imaging devices
 #
-# CONFIG_USB_DC2XX is not set
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_SCANNER is not set
+CONFIG_USB_SCANNER=m
 # CONFIG_USB_MICROTEK is not set
 # CONFIG_USB_HPUSBSCSI is not set
 
 #
 # USB Multimedia devices
 #
-
-#
-#   Video4Linux support is needed for USB Multimedia device support
-#
+# CONFIG_USB_DABUSB is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_SE401=m
+# CONFIG_USB_STV680 is not set
 
 #
 # USB Network adaptors
 #
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_KAWETH is not set
 # CONFIG_USB_CATC is not set
 # CONFIG_USB_CDCETHER is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 
 #
@@ -595,16 +854,18 @@ CONFIG_MSDOS_PARTITION=y
 #
 # USB Serial Converter support
 #
-# CONFIG_USB_SERIAL is not set
+CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_VISOR is not set
+CONFIG_USB_SERIAL_VISOR=m
+# CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
 # CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
@@ -614,9 +875,14 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
 # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
 # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
 # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
+# CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
@@ -624,18 +890,35 @@ CONFIG_MSDOS_PARTITION=y
 #
 # USB Miscellaneous drivers
 #
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
+# CONFIG_USB_BRLVGER is not set
 
 #
 # Bluetooth support
 #
 # CONFIG_BLUEZ is not set
 
+#
+# Library routines
+#
+# CONFIG_CRC32 is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+
 #
 # Kernel hacking
 #
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_KGDB is not set
 # CONFIG_XMON is not set
 # CONFIG_BDI_SWITCH is not set
-# CONFIG_DEBUG_TEXT is not set
+# CONFIG_SERIAL_TEXT_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_SECURITY_CAPABILITIES=y

arch/ppc/kernel/i8259.c

@@ -130,7 +130,8 @@ static void i8259_unmask_irq(unsigned int irq_nr)
 
 static void i8259_end_irq(unsigned int irq)
 {
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq].action)
 		i8259_unmask_irq(irq);
 }
 

arch/ppc/kernel/irq.c

@@ -443,7 +443,7 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
 	 * use the action we have.
 	 */
 	action = NULL;
-	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+	if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) {
 		action = desc->action;
 		if (!action || !action->handler) {
 			ppc_spurious_interrupts++;
@@ -468,7 +468,7 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
 	   a different instance of this same irq, the other processor
 	   will take care of it.
 	 */
-	if (!action)
+	if (unlikely(!action))
 		goto out;
 
 
@@ -487,12 +487,12 @@ void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq)
 		handle_irq_event(irq, regs, action);
 		spin_lock(&desc->lock);
 		
-		if (!(desc->status & IRQ_PENDING))
+		if (likely(!(desc->status & IRQ_PENDING)))
 			break;
 		desc->status &= ~IRQ_PENDING;
 	}
-	desc->status &= ~IRQ_INPROGRESS;
 out:
+	desc->status &= ~IRQ_INPROGRESS;
 	/*
 	 * The ->end() handler has to deal with interrupts which got
 	 * disabled while the handler was running.
@@ -561,10 +561,6 @@ void __init init_IRQ(void)
 #ifdef CONFIG_SMP
 void synchronize_irq(unsigned int irq)
 {
-        /* is there anything to synchronize with? */
-	if (!irq_desc[irq].action)
-		return;
-
 	while (irq_desc[irq].status & IRQ_INPROGRESS)
 		barrier();
 }

arch/ppc/kernel/misc.S

@@ -1296,6 +1296,9 @@ _GLOBAL(sys_call_table)
 	.long sys_futex
 	.long sys_sched_setaffinity
 	.long sys_sched_getaffinity
+	.long sys_security
+	.long sys_ni_syscall	/* 225 - reserved for Tux */
+
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
 	.endr

arch/ppc/kernel/open_pic.c

@@ -25,6 +25,7 @@
 #include <asm/sections.h>
 #include <asm/open_pic.h>
 #include <asm/i8259.h>
+#include <asm/hardirq.h>
 
 #include "open_pic_defs.h"
 
@@ -148,16 +149,15 @@ struct hw_interrupt_type open_pic_ipi = {
  * data has probably been corrupted and we're going to panic or deadlock later
  * anyway --Troy
  */
-extern unsigned long* _get_SP(void);
 #define check_arg_irq(irq) \
     if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
 	|| ISR[irq - open_pic_irq_offset] == 0) { \
       printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
-      print_backtrace(_get_SP()); }
+      show_stack(NULL); }
 #define check_arg_cpu(cpu) \
     if (cpu < 0 || cpu >= NumProcessors){ \
 	printk("open_pic.c:%d: illegal cpu %d\n", __LINE__, cpu); \
-	print_backtrace(_get_SP()); }
+	show_stack(NULL); }
 #else
 #define check_arg_ipi(ipi)	do {} while (0)
 #define check_arg_timer(timer)	do {} while (0)
@@ -798,7 +798,8 @@ static void openpic_ack_irq(unsigned int irq_nr)
 
 static void openpic_end_irq(unsigned int irq_nr)
 {
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action)
 		openpic_enable_irq(irq_nr);
 }
 

arch/ppc/kernel/ppc4xx_pic.c

@@ -236,7 +236,8 @@ ppc405_uic_end(unsigned int irq)
 		}
 	}
 
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))
+	    && irq_desc[irq].action) {
 		ppc_cached_irq_mask[word] |= 1 << (31 - bit);
 		switch (word){
 			case 0:

arch/ppc/kernel/ppc8260_pic.c

@@ -90,7 +90,8 @@ static void m8260_end_irq(unsigned int irq_nr)
 	int	bit, word;
 	volatile uint	*simr;
 
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
 
 		bit = irq_to_siubit[irq_nr];
 		word = irq_to_siureg[irq_nr];

arch/ppc/kernel/ppc8xx_pic.c

@@ -46,7 +46,8 @@ static void m8xx_unmask_irq(unsigned int irq_nr)
 
 static void m8xx_end_irq(unsigned int irq_nr)
 {
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+			&& irq_desc[irq_nr].action) {
 		int bit, word;
 
 		bit = irq_nr & 0x1f;

arch/ppc/kernel/process.c

@@ -44,6 +44,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/prom.h>
+#include <asm/hardirq.h>
 #ifdef CONFIG_PPC_ISERIES
 #include <asm/iSeries/Paca.h>
 #endif
@@ -293,7 +294,7 @@ void show_regs(struct pt_regs * regs)
 			break;
 	}
 	printk("\n");
-	print_backtrace((unsigned long *)regs->gpr[1]);
+	show_stack((unsigned long *)regs->gpr[1]);
 }
 
 void exit_thread(void)
@@ -418,7 +419,6 @@ void start_thread(struct pt_regs *regs, unsigned long nip, unsigned long sp)
 #endif /* CONFIG_ALTIVEC */
 }
 
-#if 0
 int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
 {
 	struct pt_regs *regs = tsk->thread.regs;
@@ -431,7 +431,14 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
 			| tsk->thread.fpexc_mode;
 	return 0;
 }
-#endif
+
+int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
+{
+	unsigned int val;
+
+	val = __unpack_fe01(tsk->thread.fpexc_mode);
+	return put_user(val, (unsigned int *) adr);
+}
 
 int sys_clone(int p1, int p2, int p3, int p4, int p5, int p6,
 	      struct pt_regs *regs)
@@ -486,20 +493,25 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
 }
 
 void
-print_backtrace(unsigned long *sp)
+show_stack(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
 
+	if (sp == NULL)
+		sp = (unsigned long *)_get_SP();
 	printk("Call backtrace: ");
-	while (sp) {
-		if (__get_user( i, &sp[1] ))
+	for (;;) {
+		if (__get_user(sp, (unsigned long **)sp))
+			break;
+		if (sp == NULL)
+			break;
+		if (__get_user(i, &sp[1]))
 			break;
 		if (cnt++ % 7 == 0)
 			printk("\n");
 		printk("%08lX ", i);
-		if (cnt > 32) break;
-		if (__get_user(sp, (unsigned long **)sp))
+		if (cnt > 32)
 			break;
 	}
 	printk("\n");

arch/ppc/kernel/ptrace.c

@@ -28,6 +28,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/user.h>
+#include <linux/security.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -168,6 +169,9 @@ int sys_ptrace(long request, long pid, long addr, long data)
 		/* are we already being traced? */
 		if (current->ptrace & PT_PTRACED)
 			goto out;
+		ret = security_ops->ptrace(current->parent, current);
+		if (ret)
+			goto out;
 		/* set the ptrace bit in the process flags. */
 		current->ptrace |= PT_PTRACED;
 		ret = 0;

arch/ppc/kernel/setup.c

@@ -66,7 +66,7 @@ unsigned long sysmap_size;
 
 /* Used with the BI_MEMSIZE bootinfo parameter to store the memory
    size value reported by the boot loader. */ 
-unsigned int boot_mem_size;
+unsigned long boot_mem_size;
 
 unsigned long ISA_DMA_THRESHOLD;
 unsigned long DMA_MODE_READ, DMA_MODE_WRITE;

arch/ppc/kernel/smp.c

@@ -289,273 +289,6 @@ void smp_call_function_interrupt(void)
 		atomic_inc(&call_data->finished);
 }
 
-#if 0 /* Old boot code. */
-void __init smp_boot_cpus(void)
-{
-	int i, cpu_nr;
-	struct task_struct *p;
-
-	printk("Entering SMP Mode...\n");
-        smp_store_cpu_info(0);
-	cpu_online_map = 1UL;
-
-	/*
-	 * assume for now that the first cpu booted is
-	 * cpu 0, the master -- Cort
-	 */
-	cpu_callin_map[0] = 1;
-
-	for (i = 0; i < NR_CPUS; i++) {
-		prof_counter[i] = 1;
-		prof_multiplier[i] = 1;
-	}
-
-	/*
-	 * XXX very rough.
-	 */
-	cache_decay_ticks = HZ/100;
-
-	smp_ops = ppc_md.smp_ops;
-	if (smp_ops == NULL) {
-		printk("SMP not supported on this machine.\n");
-		return;
-	}
-
-	/* Probe platform for CPUs */
-	cpu_nr = smp_ops->probe();
-
-	/*
-	 * only check for cpus we know exist.  We keep the callin map
-	 * with cpus at the bottom -- Cort
-	 */
-	if (cpu_nr > max_cpus)
-		cpu_nr = max_cpus;
-#ifdef CONFIG_PPC_ISERIES
-	smp_iSeries_space_timers( cpu_nr );
-#endif
-	for (i = 1; i < cpu_nr; i++) {
-		int c;
-		struct pt_regs regs;
-		
-		/* create a process for the processor */
-		/* only regs.msr is actually used, and 0 is OK for it */
-		memset(&regs, 0, sizeof(struct pt_regs));
-		p = do_fork(CLONE_VM|CLONE_IDLETASK, 0, &regs, 0);
-		if (IS_ERR(p))
-			panic("failed fork for CPU %d", i);
-		init_idle(p, i);
-		unhash_process(p);
-
-		secondary_ti = p->thread_info;
-		p->thread_info->cpu = i;
-
-		/*
-		 * There was a cache flush loop here to flush the cache
-		 * to memory for the first 8MB of RAM.  The cache flush
-		 * has been pushed into the kick_cpu function for those
-		 * platforms that need it.
-		 */
-
-		/* wake up cpus */
-		smp_ops->kick_cpu(i);
-		
-		/*
-		 * wait to see if the cpu made a callin (is actually up).
-		 * use this value that I found through experimentation.
-		 * -- Cort
-		 */
-		for (c = 1000; c && !cpu_callin_map[i]; c--)
-			udelay(100);
-		
-		if (cpu_callin_map[i]) {
-			char buf[32];
-			sprintf(buf, "found cpu %d", i);
-			if (ppc_md.progress) ppc_md.progress(buf, 0x350+i);
-			printk("Processor %d found.\n", i);
-		} else {
-			char buf[32];
-			sprintf(buf, "didn't find cpu %d", i);
-			if (ppc_md.progress) ppc_md.progress(buf, 0x360+i);
-			printk("Processor %d is stuck.\n", i);
-		}
-	}
-
-	/* Setup CPU 0 last (important) */
-	smp_ops->setup_cpu(0);
-	
-	/* FIXME: Not with hotplug CPUS --RR */
-	if (num_online_cpus() < 2)
-		smp_tb_synchronized = 1;
-}
-
-void __init smp_software_tb_sync(int cpu)
-{
-#define PASSES 4	/* 4 passes.. */
-	int pass;
-	int i, j;
-
-	/* stop - start will be the number of timebase ticks it takes for cpu0
-	 * to send a message to all others and the first reponse to show up.
-	 *
-	 * ASSUMPTION: this time is similiar for all cpus
-	 * ASSUMPTION: the time to send a one-way message is ping/2
-	 */
-	register unsigned long start = 0;
-	register unsigned long stop = 0;
-	register unsigned long temp = 0;
-
-	set_tb(0, 0);
-
-	/* multiple passes to get in l1 cache.. */
-	for (pass = 2; pass < 2+PASSES; pass++){
-		if (cpu == 0){
-			mb();
-			for (i = j = 1; i < NR_CPUS; i++, j++){
-				/* skip stuck cpus */
-				while (!cpu_callin_map[j])
-					++j;
-				while (cpu_callin_map[j] != pass)
-					barrier();
-			}
-			mb();
-			tb_sync_flag = pass;
-			start = get_tbl();	/* start timing */
-			while (tb_sync_flag)
-				mb();
-			stop = get_tbl();	/* end timing */
-			/* theoretically, the divisor should be 2, but
-			 * I get better results on my dual mtx. someone
-			 * please report results on other smp machines..
-			 */
-			tb_offset = (stop-start)/4;
-			mb();
-			tb_sync_flag = pass;
-			udelay(10);
-			mb();
-			tb_sync_flag = 0;
-			mb();
-			set_tb(0,0);
-			mb();
-		} else {
-			cpu_callin_map[cpu] = pass;
-			mb();
-			while (!tb_sync_flag)
-				mb();		/* wait for cpu0 */
-			mb();
-			tb_sync_flag = 0;	/* send response for timing */
-			mb();
-			while (!tb_sync_flag)
-				mb();
-			temp = tb_offset;	/* make sure offset is loaded */
-			while (tb_sync_flag)
-				mb();
-			set_tb(0,temp);		/* now, set the timebase */
-			mb();
-		}
-	}
-	if (cpu == 0) {
-		smp_tb_synchronized = 1;
-		printk("smp_software_tb_sync: %d passes, final offset: %ld\n",
-			PASSES, tb_offset);
-	}
-	/* so time.c doesn't get confused */
-	set_dec(tb_ticks_per_jiffy);
-	last_jiffy_stamp(cpu) = 0;
-}
-
-void __init smp_commence(void)
-{
-	/*
-	 *	Lets the callin's below out of their loop.
-	 */
-	if (ppc_md.progress) ppc_md.progress("smp_commence", 0x370);
-	wmb();
-	smp_commenced = 1;
-
-	/* if the smp_ops->setup_cpu function has not already synched the
-	 * timebases with a nicer hardware-based method, do so now
-	 *
-	 * I am open to suggestions for improvements to this method
-	 * -- Troy <hozer@drgw.net>
-	 *
-	 * NOTE: if you are debugging, set smp_tb_synchronized for now
-	 * since if this code runs pretty early and needs all cpus that
-	 * reported in in smp_callin_map to be working
-	 *
-	 * NOTE2: this code doesn't seem to work on > 2 cpus. -- paulus/BenH
-	 */
-	/* FIXME: This doesn't work with hotplug CPUs --RR */
-	if (!smp_tb_synchronized && num_online_cpus() == 2) {
-		unsigned long flags;
-		local_irq_save(flags);	
-		smp_software_tb_sync(0);
-		local_irq_restore(flags);
-	}
-}
-
-void __init smp_callin(void)
-{
-	int cpu = smp_processor_id();
-	
-        smp_store_cpu_info(cpu);
-	set_dec(tb_ticks_per_jiffy);
-	/* Set online before we acknowledge. */
-	set_bit(cpu, &cpu_online_map);
-	wmb();
-	cpu_callin_map[cpu] = 1;
-
-	smp_ops->setup_cpu(cpu);
-
-	while (!smp_commenced)
-		barrier();
-
-	/* see smp_commence for more info */
-	if (!smp_tb_synchronized && num_online_cpus() == 2) {
-		smp_software_tb_sync(cpu);
-	}
-	local_irq_enable();
-}
-
-/* intel needs this */
-void __init initialize_secondary(void)
-{
-}
-
-/* Activate a secondary processor. */
-int __init start_secondary(void *unused)
-{
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-	smp_callin();
-	return cpu_idle(NULL);
-}
-
-void __init smp_setup(char *str, int *ints)
-{
-}
-
-int __init setup_profiling_timer(unsigned int multiplier)
-{
-	return 0;
-}
-
-void __init smp_store_cpu_info(int id)
-{
-        struct cpuinfo_PPC *c = &cpu_data[id];
-
-	/* assume bogomips are same for everything */
-        c->loops_per_jiffy = loops_per_jiffy;
-        c->pvr = mfspr(PVR);
-}
-
-static int __init maxcpus(char *str)
-{
-	get_option(&str, &max_cpus);
-	return 1;
-}
-
-__setup("maxcpus=", maxcpus);
-#else /* New boot code */
 /* FIXME: Do this properly for all archs --RR */
 static spinlock_t timebase_lock = SPIN_LOCK_UNLOCKED;
 static unsigned int timebase_upper = 0, timebase_lower = 0;
@@ -643,6 +376,7 @@ int __devinit start_secondary(void *unused)
 	printk("CPU %i done callin...\n", cpu);
 	smp_ops->setup_cpu(cpu);
 	printk("CPU %i done setup...\n", cpu);
+	local_irq_enable();
 	smp_ops->take_timebase();
 	printk("CPU %i done timebase take...\n", cpu);
 
@@ -707,4 +441,3 @@ void smp_cpus_done(unsigned int max_cpus)
 {
 	smp_ops->setup_cpu(0);
 }
-#endif

arch/ppc/mm/init.c

@@ -45,6 +45,7 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
+#include <asm/bootinfo.h>
 
 #include "mem_pieces.h"
 #include "mmu_decl.h"
@@ -242,9 +243,14 @@ void __init MMU_init(void)
 
 	/*
 	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.
+	 * is lowmem, and how much is highmem.  If we were
+	 * passed the total memory size from the bootloader,
+	 * just use it.
 	 */
-	total_memory = ppc_md.find_end_of_memory();
+	if (boot_mem_size)
+		total_memory = boot_mem_size;
+	else
+		total_memory = ppc_md.find_end_of_memory();
 
 	if (__max_memory && total_memory > __max_memory)
 		total_memory = __max_memory;

arch/ppc/platforms/apus_setup.c

@@ -602,8 +602,7 @@ int __debug_serinit( void )
 {
 	unsigned long flags;
 
-	save_flags (flags);
-	cli();
+	local_irq_save(flags);
 
 	/* turn off Rx and Tx interrupts */
 	custom.intena = IF_RBF | IF_TBE;
@@ -611,7 +610,7 @@ int __debug_serinit( void )
 	/* clear any pending interrupt */
 	custom.intreq = IF_RBF | IF_TBE;
 
-	restore_flags (flags);
+	local_irq_restore(flags);
 
 	/*
 	 * set the appropriate directions for the modem control flags,

arch/ppc/platforms/chrp_smp.c

@@ -77,25 +77,20 @@ smp_chrp_give_timebase(void)
 	spin_unlock(&timebase_lock);
 
 	while (timebase_upper || timebase_lower)
-		rmb();
+		barrier();
 	call_rtas("thaw-time-base", 0, 1, NULL);
 }
 
 void __devinit
 smp_chrp_take_timebase(void)
 {
-	int done = 0;
-
-	while (!done) {
-		spin_lock(&timebase_lock);
-		if (timebase_upper || timebase_lower) {
-			set_tb(timebase_upper, timebase_lower);
-			timebase_upper = 0;
-			timebase_lower = 0;
-			done = 1;
-		}
-		spin_unlock(&timebase_lock);
-	}
+	while (!(timebase_upper || timebase_lower))
+		barrier();
+	spin_lock(&timebase_lock);
+	set_tb(timebase_upper, timebase_lower);
+	timebase_upper = 0;
+	timebase_lower = 0;
+	spin_unlock(&timebase_lock);
 	printk("CPU %i taken timebase\n", smp_processor_id());
 }
 

arch/ppc/platforms/lopec_setup.c

@@ -301,12 +301,6 @@ lopec_progress(char *s, unsigned short hex)
 }
 #endif	/* CONFIG_SERIAL_TEXT_DEBUG */
 
-static unsigned long __init
-lopec_find_end_of_memory(void)
-{
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-}
-
 TODC_ALLOC();
 
 static void __init
@@ -376,7 +370,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.power_off = lopec_power_off;
 	ppc_md.halt = lopec_halt;
 
-	ppc_md.find_end_of_memory = lopec_find_end_of_memory;
 	ppc_md.setup_io_mappings = lopec_map_io;
 
 	ppc_md.time_init = todc_time_init;

arch/ppc/platforms/pmac_pic.c

@@ -149,7 +149,8 @@ static void __pmac pmac_unmask_irq(unsigned int irq_nr)
 
 static void __pmac pmac_end_irq(unsigned int irq_nr)
 {
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
+	    && irq_desc[irq_nr].action) {
         	set_bit(irq_nr, ppc_cached_irq_mask);
 	        pmac_set_irq_mask(irq_nr, 1);
 	}

arch/ppc/platforms/pplus_setup.c

@@ -191,11 +191,8 @@ pplus_restart(char *cmd)
 static void
 pplus_halt(void)
 {
-	unsigned long flags;
-	local_irq_disable();
 	/* set exception prefix high - to the prom */
-	save_flags( flags );
-	restore_flags( flags|MSR_IP );
+	_nmask_and_or_msr(MSR_EE, MSR_IP);
 
 	/* make sure bit 0 (reset) is a 0 */
 	outb( inb(0x92) & ~1L , 0x92 );

arch/ppc/platforms/prep_setup.c

@@ -458,10 +458,6 @@ prep_calibrate_decr(void)
 
 	/* If we didn't get it from the residual data, try this. */
 	if ( res ) {
-		unsigned long flags;
-
-		save_flags(flags);
-
 #define TIMER0_COUNT 0x40
 #define TIMER_CONTROL 0x43
 		/* set timer to periodic mode */
@@ -476,7 +472,7 @@ prep_calibrate_decr(void)
 		/* wait for calibrate */
 		while ( calibrate_steps )
 			;
-		restore_flags(flags);
+		local_irq_disable();
 		free_irq( 0, NULL);
 	}
 }
@@ -581,11 +577,8 @@ prep_restart(char *cmd)
 static void __prep
 prep_halt(void)
 {
-	unsigned long flags;
-	local_irq_disable();
 	/* set exception prefix high - to the prom */
-	save_flags( flags );
-	restore_flags( flags|MSR_IP );
+	_nmask_and_or_msr(MSR_EE, MSR_IP);
 
 	/* make sure bit 0 (reset) is a 0 */
 	outb( inb(0x92) & ~1L , 0x92 );
@@ -648,11 +641,8 @@ static void __prep
 prep_power_off(void)
 {
 	if ( _prep_type == _PREP_IBM) {
-		unsigned long flags;
-		local_irq_disable();
 		/* set exception prefix high - to the prom */
-		save_flags( flags );
-		restore_flags( flags|MSR_IP );
+		_nmask_and_or_msr(MSR_EE, MSR_IP);
 
 		utah_sig87c750_setbit(21, 5, 1); /* set bit 21.5, "PMEXEC_OFF" */
 
@@ -761,37 +751,6 @@ static struct smp_ops_t prep_smp_ops __prepdata = {
 };
 #endif /* CONFIG_SMP */
 
-/*
- * This finds the amount of physical ram and does necessary
- * setup for prep.  This is pretty architecture specific so
- * this will likely stay separate from the pmac.
- * -- Cort
- */
-static unsigned long __init
-prep_find_end_of_memory(void)
-{
-	unsigned long total = 0;
-	extern unsigned int boot_mem_size;
-
-#ifdef CONFIG_PREP_RESIDUAL	
-	total = res->TotalMemory;
-#endif	
-
-	if (total == 0 && boot_mem_size != 0)
-		total = boot_mem_size;
-	else if (total == 0) {
-		/*
-		 * I need a way to probe the amount of memory if the residual
-		 * data doesn't contain it. -- Cort
-		 */
-		total = 0x02000000;
-		printk(KERN_INFO "Ramsize from residual data was 0"
-			 " -- defaulting to %ldM\n", total>>20);
-	}
-
-	return (total);
-}
-
 /*
  * Setup the bat mappings we're going to load that cover
  * the io areas.  RAM was mapped by mapin_ram().
@@ -807,13 +766,15 @@ prep_map_io(void)
 static int __init
 prep_request_io(void)
 {
+	if (_machine == _MACH_prep) {
 #ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
+		request_region(PREP_NVRAM_AS0, 0x8, "nvram");
 #endif
-	request_region(0x00,0x20,"dma1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xc0,0x20,"dma2");
+		request_region(0x00,0x20,"dma1");
+		request_region(0x40,0x20,"timer");
+		request_region(0x80,0x10,"dma page reg");
+		request_region(0xc0,0x20,"dma2");
+	}
 
 	return 0;
 }
@@ -879,7 +840,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		ppc_md.time_init      = mk48t59_init;
 	}
 
-	ppc_md.find_end_of_memory = prep_find_end_of_memory;
 	ppc_md.setup_io_mappings = prep_map_io;
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)

arch/ppc/platforms/spruce_setup.c

@@ -187,12 +187,6 @@ spruce_halt(void)
 
 extern int boot_mem_size;
 
-static unsigned long __init
-spruce_find_end_of_memory(void)
-{
-	return boot_mem_size;
-}
-
 static void __init
 spruce_map_io(void)
 {
@@ -214,7 +208,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.init_IRQ = cpc700_init_IRQ;
 	ppc_md.get_irq = cpc700_get_irq;
 
-	ppc_md.find_end_of_memory = spruce_find_end_of_memory;
 	ppc_md.setup_io_mappings = spruce_map_io;
 
 	ppc_md.restart = spruce_restart;

include/asm-ppc/bitops.h

@@ -26,10 +26,6 @@
 #define SMP_MB
 #endif /* CONFIG_SMP */
 
-/*
- * These used to be if'd out here because using : "cc" as a constraint
- * resulted in errors from egcs.  Things appear to be OK with gcc-2.95.
- */
 static __inline__ void set_bit(int nr, volatile unsigned long * addr)
 {
 	unsigned long old;
@@ -224,9 +220,7 @@ static __inline__ int __test_and_change_bit(int nr, volatile unsigned long *addr
 
 static __inline__ int test_bit(int nr, __const__ volatile unsigned long *addr)
 {
-	__const__ unsigned int *p = (__const__ unsigned int *) addr;
-
-	return ((p[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
+	return ((addr[nr >> 5] >> (nr & 0x1f)) & 1) != 0;
 }
 
 /* Return the bit position of the most significant 1 bit in a word */

include/asm-ppc/bootinfo.h

@@ -35,6 +35,7 @@ struct bi_record {
 
 extern struct bi_record *find_bootinfo(void);
 extern void parse_bootinfo(struct bi_record *rec);
+extern unsigned long boot_mem_size;
 
 #endif /* CONFIG_APUS */
 

include/asm-ppc/processor.h

@@ -196,10 +196,11 @@
 #define	SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
 #define	SPRN_EAR	0x11A	/* External Address Register */
 #define	SPRN_ESR	0x3D4	/* Exception Syndrome Register */
-#define	  ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
-#define	  ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
-#define	  ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
-#define	  ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define	  ESR_MCI	0x80000000	/* 405 Machine Check - Instruction */
+#define	  ESR_IMCP	0x80000000	/* 403 Inst. Mach. Check - Protection */
+#define	  ESR_IMCN	0x40000000	/* 403 Inst. Mach. Check - Non-config */
+#define	  ESR_IMCB	0x20000000	/* 403 Inst. Mach. Check - Bus error */
+#define	  ESR_IMCT	0x10000000	/* 403 Inst. Mach. Check - Timeout */
 #define	  ESR_PIL	0x08000000	/* Program Exception - Illegal */
 #define	  ESR_PPR	0x04000000	/* Program Exception - Priveleged */
 #define	  ESR_PTR	0x02000000	/* Program Exception - Trap */
@@ -747,9 +748,10 @@ unsigned long get_wchan(struct task_struct *p);
 #define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
 
 /* Get/set floating-point exception mode */
-#define GET_FP_EXC_MODE(tsk)		__unpack_fe01((tsk)->thread.fpexc_mode)
-#define SET_FP_EXC_MODE(tsk, val)	set_fpexc_mode((tsk), (val))
+#define GET_FPEXC_CTL(tsk, adr)	get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val)	set_fpexc_mode((tsk), (val))
 
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
 extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
 
 static inline unsigned int __unpack_fe01(unsigned int msr_bits)

include/asm-ppc/rwsem.h

@@ -72,12 +72,26 @@ static inline void init_rwsem(struct rw_semaphore *sem)
  */
 static inline void __down_read(struct rw_semaphore *sem)
 {
-	if (atomic_inc_return((atomic_t *)(&sem->count)) >= 0)
+	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
 		smp_wmb();
 	else
 		rwsem_down_read_failed(sem);
 }
 
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
 /*
  * lock for writing
  */
@@ -93,6 +107,16 @@ static inline void __down_write(struct rw_semaphore *sem)
 		rwsem_down_write_failed(sem);
 }
 
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
 /*
  * unlock after reading
  */

include/asm-ppc/smplock.h

@@ -24,7 +24,7 @@ extern spinlock_t kernel_flag;
 /*
  * Release global kernel lock and global interrupt lock
  */
-#define release_kernel_lock(task, cpu)		\
+#define release_kernel_lock(task)		\
 do {						\
 	if (unlikely(task->lock_depth >= 0))	\
 		spin_unlock(&kernel_flag);	\

include/asm-ppc/unistd.h

@@ -231,6 +231,8 @@
 #define __NR_futex		221
 #define __NR_sched_setaffinity	222
 #define __NR_sched_getaffinity	223
+#define __NR_security		224
+#define __NR_tuxcall		225
 
 #define __NR(n)	#n