Merge kroah.com:/home/greg/linux/BK/bleed-2.6

into kroah.com:/home/greg/linux/BK/i2c-2.6

drivers/i2c/busses/Kconfig

@@ -118,8 +118,14 @@ config I2C_I810
 	  will be called i2c-i810.
 
 config I2C_IBM_IIC
-	tristate "IBM IIC I2C"
+	tristate "IBM PPC 4xx on-chip I2C interface"
 	depends on IBM_OCP && I2C
+	help
+	  Say Y here if you want to use IIC peripheral found on 
+	  embedded IBM PPC 4xx based systems. 
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-ibm_iic.
 
 config I2C_IOP3XX
 	tristate "Intel XScale IOP3xx on-chip I2C interface"

drivers/i2c/busses/i2c-ibm_iic.c

@@ -3,7 +3,7 @@
  *
  * Support for the IIC peripheral on IBM PPC 4xx
  *
- * Copyright (c) 2003 Zultys Technologies.
+ * Copyright (c) 2003, 2004 Zultys Technologies.
  * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
  *
  * Based on original work by 
@@ -45,7 +45,7 @@
 
 #include "i2c-ibm_iic.h"
 
-#define DRIVER_VERSION "2.0"
+#define DRIVER_VERSION "2.01"
 
 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
 MODULE_LICENSE("GPL");
@@ -69,14 +69,14 @@ MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)");
 #endif
 
 #if DBG_LEVEL > 0
-#  define DBG(x...)	printk(KERN_DEBUG "ibm-iic" ##x)
+#  define DBG(f,x...)	printk(KERN_DEBUG "ibm-iic" f, ##x)
 #else
-#  define DBG(x...)	((void)0)
+#  define DBG(f,x...)	((void)0)
 #endif
 #if DBG_LEVEL > 1
-#  define DBG2(x...) 	DBG( ##x )
+#  define DBG2(f,x...) 	DBG(f, ##x)
 #else
-#  define DBG2(x...) 	((void)0)
+#  define DBG2(f,x...) 	((void)0)
 #endif
 #if DBG_LEVEL > 2
 static void dump_iic_regs(const char* header, struct ibm_iic_private* dev)
@@ -455,6 +455,16 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	}		
 	for (i = 0; i < num; ++i){
 		if (unlikely(msgs[i].len <= 0)){
+			if (num == 1 && !msgs[0].len){
+				/* Special case for I2C_SMBUS_QUICK emulation.
+				 * Although this logic is FAR FROM PERFECT, this 
+				 * is what previous driver version did.
+				 * IBM IIC doesn't support 0-length transactions
+				 * (except bit-banging through IICx_DIRECTCNTL).
+				 */
+				DBG("%d: zero-length msg kludge\n", dev->idx); 
+				return 0;
+			}
 			DBG("%d: invalid len %d in msg[%d]\n", dev->idx, 
 				msgs[i].len, i);
 			return -EINVAL;
@@ -549,19 +559,24 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 
 	struct ibm_iic_private* dev;
 	struct i2c_adapter* adap;
+	struct ocp_func_iic_data* iic_data = ocp->def->additions;
 	int ret;
-	bd_t* bd = (bd_t*)&__res;
 	
+	if (!iic_data)
+		printk(KERN_WARNING"ibm-iic%d: missing additional data!\n",
+			ocp->def->index);
+
 	if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){
-		printk(KERN_CRIT "ibm-iic: failed to allocate device data\n");
+		printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n",
+			ocp->def->index);
 		return -ENOMEM;
 	}
 
 	memset(dev, 0, sizeof(*dev));
-	dev->idx = ocp->num;
+	dev->idx = ocp->def->index;
 	ocp_set_drvdata(ocp, dev);
 	
-	if (!(dev->vaddr = ioremap(ocp->paddr, sizeof(struct iic_regs)))){
+	if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){
 		printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n",
 			dev->idx);
 		ret = -ENXIO;
@@ -570,7 +585,7 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 	
 	init_waitqueue_head(&dev->wq);
 
-	dev->irq = iic_force_poll ? -1 : ocp->irq;
+	dev->irq = iic_force_poll ? -1 : ocp->def->irq;
 	if (dev->irq >= 0){
 		/* Disable interrupts until we finish intialization,
 		   assumes level-sensitive IRQ setup...
@@ -589,13 +604,12 @@ static int __devinit iic_probe(struct ocp_device *ocp){
 			dev->idx);
 		
 	/* Board specific settings */
-	BUG_ON(dev->idx >= sizeof(bd->bi_iic_fast) / sizeof(bd->bi_iic_fast[0]));
-	dev->fast_mode = iic_force_fast ? 1 : bd->bi_iic_fast[dev->idx];
+	dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0);
 	
 	/* clckdiv is the same for *all* IIC interfaces, 
 	 * but I'd rather make a copy than introduce another global. --ebs
 	 */
-	dev->clckdiv = iic_clckdiv(bd->bi_opb_busfreq);
+	dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq);
 	DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv);
 	
 	/* Initialize IIC interface */
@@ -664,7 +678,7 @@ static void __devexit iic_remove(struct ocp_device *ocp)
 
 static struct ocp_device_id ibm_iic_ids[] __devinitdata = 
 {
-	{ .vendor = OCP_VENDOR_IBM, .device = OCP_FUNC_IIC },
+	{ .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC },
 	{ .vendor = OCP_VENDOR_INVALID }
 };
 
@@ -672,7 +686,7 @@ MODULE_DEVICE_TABLE(ocp, ibm_iic_ids);
 
 static struct ocp_driver ibm_iic_driver =
 {
-	.name 		= "ocp_iic",
+	.name 		= "iic",
 	.id_table	= ibm_iic_ids,
 	.probe		= iic_probe,
 	.remove		= __devexit_p(iic_remove),
@@ -685,7 +699,7 @@ static struct ocp_driver ibm_iic_driver =
 static int __init iic_init(void)
 {
 	printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n");
-	return ocp_module_init(&ibm_iic_driver);
+	return ocp_register_driver(&ibm_iic_driver);
 }
 
 static void __exit iic_exit(void)

drivers/i2c/busses/i2c-parport.h

@@ -67,13 +67,18 @@ static struct adapter_parm adapter_parm[] = {
 		.getsda	= { 0x40, STAT, 1 },
 		.getscl	= { 0x08, STAT, 1 },
 	},
-	/* type 4: ADM1025 and ADM1032 evaluation boards */
+	/* type 4: ADM1032 evaluation board */
+	{
+		.setsda	= { 0x02, DATA, 1 },
+		.setscl	= { 0x01, DATA, 1 },
+		.getsda	= { 0x10, STAT, 1 },
+		.init	= { 0xf0, DATA, 0 },
+	},
+	/* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */
 	{
 		.setsda	= { 0x02, DATA, 1 },
 		.setscl	= { 0x01, DATA, 1 },
 		.getsda	= { 0x10, STAT, 1 },
-		.init	= { 0xf0, DATA, 0 }, /* ADM1025 doesn't need this,
-						but it doesn't hurt */
 	},
 };
 
@@ -85,4 +90,5 @@ MODULE_PARM_DESC(type,
 	" 1 = home brew teletext adapter\n"
 	" 2 = Velleman K8000 adapter\n"
 	" 3 = ELV adapter\n"
-	" 4 = ADM1025 and ADM1032 evaluation boards\n");
+	" 4 = ADM1032 evaluation board\n"
+	" 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n");

drivers/i2c/chips/Kconfig

@@ -145,6 +145,16 @@ config SENSORS_LM90
 	  This driver can also be built as a module.  If so, the module
 	  will be called lm90.
 
+config SENSORS_MAX1619
+	tristate "Maxim MAX1619 sensor chip"
+	depends on I2C && EXPERIMENTAL
+	select I2C_SENSOR
+	help
+	  If you say yes here you get support for MAX1619 sensor chip.
+	  
+	  This driver can also be built as a module.  If so, the module
+	  will be called max1619.
+
 config SENSORS_VIA686A
 	tristate "VIA686A"
 	depends on I2C && EXPERIMENTAL

drivers/i2c/chips/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SENSORS_LM80)	+= lm80.o
 obj-$(CONFIG_SENSORS_LM83)	+= lm83.o
 obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_LM90)	+= lm90.o
+obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
 obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_RTC8564)	+= rtc8564.o

drivers/i2c/chips/eeprom.c

@@ -203,11 +203,12 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
+	/* prevent 24RF08 corruption */
+	i2c_smbus_write_quick(new_client, 0);
+
 	/* Now, we do the remaining detection. It is not there, unless you force
 	   the checksum to work out. */
 	if (checksum) {
-		/* prevent 24RF08 corruption */
-		i2c_smbus_write_quick(new_client, 0);
 		cs = 0;
 		for (i = 0; i <= 0x3e; i++)
 			cs += i2c_smbus_read_byte_data(new_client, i);

drivers/i2c/chips/max1619.c

+/*
+ * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
+ *             monitoring
+ * Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
+ *                         Jean Delvare <khali@linux-fr.org>
+ *
+ * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
+ * It reports up to two temperatures (its own plus up to
+ * one external one). Complete datasheet can be
+ * obtained from Maxim's website at:
+ *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+
+
+static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c_range[] = { 0x18, 0x1a, 0x29, 0x2b,
+						0x4c, 0x4e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+static unsigned int normal_isa_range[] = { I2C_CLIENT_ISA_END };
+
+/*
+ * Insmod parameters
+ */
+
+SENSORS_INSMOD_1(max1619);
+
+/*
+ * The MAX1619 registers
+ */
+
+#define MAX1619_REG_R_MAN_ID		0xFE
+#define MAX1619_REG_R_CHIP_ID		0xFF
+#define MAX1619_REG_R_CONFIG		0x03
+#define MAX1619_REG_W_CONFIG		0x09
+#define MAX1619_REG_R_CONVRATE		0x04
+#define MAX1619_REG_W_CONVRATE		0x0A
+#define MAX1619_REG_R_STATUS		0x02
+#define MAX1619_REG_R_LOCAL_TEMP	0x00
+#define MAX1619_REG_R_REMOTE_TEMP	0x01
+#define MAX1619_REG_R_REMOTE_HIGH	0x07
+#define MAX1619_REG_W_REMOTE_HIGH	0x0D
+#define MAX1619_REG_R_REMOTE_LOW	0x08
+#define MAX1619_REG_W_REMOTE_LOW	0x0E
+#define MAX1619_REG_R_REMOTE_CRIT	0x10
+#define MAX1619_REG_W_REMOTE_CRIT	0x12
+#define MAX1619_REG_R_TCRIT_HYST	0x11
+#define MAX1619_REG_W_TCRIT_HYST	0x13
+
+/*
+ * Conversions and various macros
+ */
+
+#define TEMP_FROM_REG(val)	((val & 0x80 ? val-0x100 : val) * 1000)
+#define TEMP_TO_REG(val)	((val < 0 ? val+0x100*1000 : val) / 1000)
+
+/*
+ * Functions declaration
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter);
+static int max1619_detect(struct i2c_adapter *adapter, int address,
+	int kind);
+static void max1619_init_client(struct i2c_client *client);
+static int max1619_detach_client(struct i2c_client *client);
+static struct max1619_data *max1619_update_device(struct device *dev);
+
+/*
+ * Driver data (common to all clients)
+ */
+
+static struct i2c_driver max1619_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "max1619",
+	.flags		= I2C_DF_NOTIFY,
+	.attach_adapter	= max1619_attach_adapter,
+	.detach_client	= max1619_detach_client,
+};
+
+/*
+ * Client data (each client gets its own)
+ */
+
+struct max1619_data {
+	struct i2c_client client;
+	struct semaphore update_lock;
+	char valid; /* zero until following fields are valid */
+	unsigned long last_updated; /* in jiffies */
+
+	/* registers values */
+	u8 temp_input1; /* local */
+	u8 temp_input2, temp_low2, temp_high2; /* remote */
+	u8 temp_crit2;
+	u8 temp_hyst2;
+	u8 alarms; 
+};
+
+/*
+ * Internal variables
+ */
+
+static int max1619_id = 0;
+
+/*
+ * Sysfs stuff
+ */
+
+#define show_temp(value) \
+static ssize_t show_##value(struct device *dev, char *buf) \
+{ \
+	struct max1619_data *data = max1619_update_device(dev); \
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \
+}
+show_temp(temp_input1);
+show_temp(temp_input2);
+show_temp(temp_low2);
+show_temp(temp_high2);
+show_temp(temp_crit2);
+show_temp(temp_hyst2);
+
+#define set_temp2(value, reg) \
+static ssize_t set_##value(struct device *dev, const char *buf, \
+	size_t count) \
+{ \
+	struct i2c_client *client = to_i2c_client(dev); \
+	struct max1619_data *data = i2c_get_clientdata(client); \
+	data->value = TEMP_TO_REG(simple_strtol(buf, NULL, 10)); \
+	i2c_smbus_write_byte_data(client, reg, data->value); \
+	return count; \
+}
+
+set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW);
+set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH);
+set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT);
+set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST);
+
+static ssize_t show_alarms(struct device *dev, char *buf)
+{
+	struct max1619_data *data = max1619_update_device(dev);
+	return sprintf(buf, "%d\n", data->alarms);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
+static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL);
+static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2,
+	set_temp_low2);
+static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2,
+	set_temp_high2);
+static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2,
+	set_temp_crit2);
+static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2,
+	set_temp_hyst2);
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
+
+/*
+ * Real code
+ */
+
+static int max1619_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, max1619_detect);
+}
+
+/*
+ * The following function does more than just detection. If detection
+ * succeeds, it also registers the new chip.
+ */
+static int max1619_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *new_client;
+	struct max1619_data *data;
+	int err = 0;
+	const char *name = "";	
+	u8 reg_config=0, reg_convrate=0, reg_status=0;
+	u8 man_id, chip_id;
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	if (!(data = kmalloc(sizeof(struct max1619_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto exit;
+	}
+	memset(data, 0, sizeof(struct max1619_data));
+
+	/* The common I2C client data is placed right before the
+	   MAX1619-specific data. */
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &max1619_driver;
+	new_client->flags = 0;
+
+	/*
+	 * Now we do the remaining detection. A negative kind means that
+	 * the driver was loaded with no force parameter (default), so we
+	 * must both detect and identify the chip. A zero kind means that
+	 * the driver was loaded with the force parameter, the detection
+	 * step shall be skipped. A positive kind means that the driver
+	 * was loaded with the force parameter and a given kind of chip is
+	 * requested, so both the detection and the identification steps
+	 * are skipped.
+	 */
+	if (kind < 0) { /* detection */
+		reg_config = i2c_smbus_read_byte_data(new_client,
+			      MAX1619_REG_R_CONFIG);
+		reg_convrate = i2c_smbus_read_byte_data(new_client,
+			       MAX1619_REG_R_CONVRATE);
+		reg_status = i2c_smbus_read_byte_data(new_client,
+				MAX1619_REG_R_STATUS);
+		if ((reg_config & 0x03) != 0x00
+		 || reg_convrate > 0x07 || (reg_status & 0x61 ) !=0x00) {
+			dev_dbg(&adapter->dev,
+				"MAX1619 detection failed at 0x%02x.\n",
+				address);
+			goto exit_free;
+		}
+	}
+
+	if (kind <= 0) { /* identification */
+	
+		man_id = i2c_smbus_read_byte_data(new_client,
+			 MAX1619_REG_R_MAN_ID);
+		chip_id = i2c_smbus_read_byte_data(new_client,
+			  MAX1619_REG_R_CHIP_ID);
+		
+		if ((man_id == 0x4D) && (chip_id == 0x04)){  
+				kind = max1619;
+			}
+		}
+
+		if (kind <= 0) { /* identification failed */
+			dev_info(&adapter->dev,
+			    "Unsupported chip (man_id=0x%02X, "
+			    "chip_id=0x%02X).\n", man_id, chip_id);
+			goto exit_free;
+		}
+	
+
+	if (kind == max1619){
+		name = "max1619";
+	}
+
+	/* We can fill in the remaining client fields */
+	strlcpy(new_client->name, name, I2C_NAME_SIZE);
+	new_client->id = max1619_id++;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto exit_free;
+
+	/* Initialize the MAX1619 chip */
+	max1619_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_crit_hyst);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+
+	return 0;
+
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static void max1619_init_client(struct i2c_client *client)
+{
+	u8 config;
+
+	/*
+	 * Start the conversions.
+	 */
+	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
+				  5); /* 2 Hz */
+	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
+	if (config & 0x40)
+		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
+					  config & 0xBF); /* run */
+}
+
+static int max1619_detach_client(struct i2c_client *client)
+{
+	int err;
+
+	if ((err = i2c_detach_client(client))) {
+		dev_err(&client->dev, "Client deregistration failed, "
+			"client not detached.\n");
+		return err;
+	}
+
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+static struct max1619_data *max1619_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max1619_data *data = i2c_get_clientdata(client);
+
+	down(&data->update_lock);
+
+	if ((jiffies - data->last_updated > HZ * 2) ||
+	    (jiffies < data->last_updated) ||
+	    !data->valid) {
+		
+		dev_dbg(&client->dev, "Updating max1619 data.\n");
+		data->temp_input1 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_LOCAL_TEMP);
+		data->temp_input2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_TEMP);
+		data->temp_high2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_HIGH);
+		data->temp_low2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_LOW);
+		data->temp_crit2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_REMOTE_CRIT);
+		data->temp_hyst2 = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_TCRIT_HYST);
+		data->alarms = i2c_smbus_read_byte_data(client,
+					MAX1619_REG_R_STATUS);
+
+		data->last_updated = jiffies;
+		data->valid = 1;
+	}
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+static int __init sensors_max1619_init(void)
+{
+	return i2c_add_driver(&max1619_driver);
+}
+
+static void __exit sensors_max1619_exit(void)
+{
+	i2c_del_driver(&max1619_driver);
+}
+
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+	"Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("MAX1619 sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_max1619_init);
+module_exit(sensors_max1619_exit);

drivers/i2c/i2c-core.c

@@ -28,6 +28,7 @@
 #include <linux/slab.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/idr.h>
 #include <linux/seq_file.h>
 #include <asm/uaccess.h>
 
@@ -35,6 +36,7 @@
 static LIST_HEAD(adapters);
 static LIST_HEAD(drivers);
 static DECLARE_MUTEX(core_lists);
+static DEFINE_IDR(i2c_adapter_idr);
 
 int i2c_device_probe(struct device *dev)
 {
@@ -113,13 +115,19 @@ static struct device_attribute dev_attr_client_name = {
  */
 int i2c_add_adapter(struct i2c_adapter *adap)
 {
-	static int nr = 0;
+	int id, res = 0;
 	struct list_head   *item;
 	struct i2c_driver  *driver;
 
 	down(&core_lists);
 
-	adap->nr = nr++;
+	if (idr_pre_get(&i2c_adapter_idr, GFP_KERNEL) == 0) {
+		res = -ENOMEM;
+		goto out_unlock;
+	}
+
+	id = idr_get_new(&i2c_adapter_idr, NULL);
+	adap->nr =  id & MAX_ID_MASK;
 	init_MUTEX(&adap->bus_lock);
 	init_MUTEX(&adap->clist_lock);
 	list_add_tail(&adap->list,&adapters);
@@ -151,10 +159,12 @@ int i2c_add_adapter(struct i2c_adapter *adap)
 			/* We ignore the return code; if it fails, too bad */
 			driver->attach_adapter(adap);
 	}
-	up(&core_lists);
 
 	dev_dbg(&adap->dev, "registered as adapter #%d\n", adap->nr);
-	return 0;
+
+ out_unlock:
+	up(&core_lists);
+	return res;
 }
 
 
@@ -208,6 +218,9 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 	wait_for_completion(&adap->dev_released);
 	wait_for_completion(&adap->class_dev_released);
 
+	/* free dynamically allocated bus id */
+	idr_remove(&i2c_adapter_idr, adap->nr);
+
 	dev_dbg(&adap->dev, "adapter unregistered\n");
 
  out_unlock: