Merge bk://kernel.bkbits.net/gregkh/linux/usb-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

drivers/usb/gadget/Kconfig

@@ -124,33 +124,6 @@ config USB_SA1100
 	depends on USB_GADGET_SA1100
 	default USB_GADGET
 
-config USB_GADGET_DUMMY_HCD
-	boolean "Dummy HCD (DEVELOPMENT)"
-	depends on USB
-	help
-	  This host controller driver emulates USB, looping all data transfer
-	  requests back to a USB "gadget driver" in the same host.  The host
-	  side is the master; the gadget side is the slave.  Gadget drivers
-	  can be high, full, or low speed; and they have access to endpoints
-	  like those from NET2280, PXA2xx, or SA1100 hardware.
-	  
-	  This may help in some stages of creating a driver to embed in a
-	  Linux device, since it lets you debug several parts of the gadget
-	  driver without its hardware or drivers being involved.
-	  
-	  Since such a gadget side driver needs to interoperate with a host
-	  side Linux-USB device driver, this may help to debug both sides
-	  of a USB protocol stack.
-
-	  Say "y" to link the driver statically, or "m" to build a
-	  dynamically linked module called "dummy_hcd" and force all
-	  gadget drivers to also be dynamically linked.
-
-config USB_DUMMY_HCD
-	tristate
-	depends on USB_GADGET_DUMMY_HCD
-	default USB_GADGET
-
 endchoice
 
 
@@ -268,27 +241,6 @@ config USB_G_SERIAL
 
 # - none yet
 
-config USB_G_SERIAL
-	tristate "serial Gadget"
-	depends on USB_GADGET && (USB_DUMMY_HCD || USB_NET2280 || USB_PXA2XX || USB_SA1100)
-
-config USB_G_SERIAL_NET2280
-	bool
-	# for now, treat the "dummy" hcd as if it were a net2280
-	depends on USB_G_SERIAL && (USB_NET2280 || USB_DUMMY_HCD)
-	default y
-
-config USB_G_SERIAL_PXA2XX
-	bool
-	depends on USB_G_SERIAL && USB_PXA2XX
-	default y
-
-config USB_G_SERIAL_SA1100
-	bool
-	depends on USB_G_SERIAL && USB_SA1100
-	default y
-
-
 endchoice
 
 endmenu

drivers/usb/gadget/inode.c

@@ -232,18 +232,27 @@ static void put_ep (struct ep_data *data)
  * the usb controller exposes.
  */
 
-#ifdef	CONFIG_USB_GADGETFS_NET2280
+#ifdef	CONFIG_USB_GADGET_DUMMY_HCD
+/* act (mostly) like a net2280 */
+#define CONFIG_USB_GADGET_NET2280
+#endif
+
+#ifdef	CONFIG_USB_GADGET_NET2280
 #define CHIP			"net2280"
 #define HIGHSPEED
 #endif
 
-#ifdef	CONFIG_USB_GADGETFS_PXA2XX
+#ifdef	CONFIG_USB_GADGET_PXA2XX
 #define CHIP			"pxa2xx_udc"
 /* earlier hardware doesn't have UDCCFR, races set_{config,interface} */
 #warning works best with pxa255 or newer
 #endif
 
-#ifdef	CONFIG_USB_GADGETFS_SA1100
+#ifdef	CONFIG_USB_GADGET_GOKU
+#define CHIP			"goku_udc"
+#endif
+
+#ifdef	CONFIG_USB_GADGET_SA1100
 #define CHIP			"sa1100"
 #endif
 
@@ -397,7 +406,7 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len)
 
 /* handle a synchronous OUT bulk/intr/iso transfer */
 static ssize_t
-ep_read (struct file *fd, char *buf, size_t len, loff_t *ptr)
+ep_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr)
 {
 	struct ep_data		*data = fd->private_data;
 	void			*kbuf;
@@ -441,7 +450,7 @@ ep_read (struct file *fd, char *buf, size_t len, loff_t *ptr)
 
 /* handle a synchronous IN bulk/intr/iso transfer */
 static ssize_t
-ep_write (struct file *fd, const char *buf, size_t len, loff_t *ptr)
+ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct ep_data		*data = fd->private_data;
 	void			*kbuf;