e100 net driver update:

* Added Documentation/networking/e100.txt.
* Added drivers/net/Config.help text for CONFIG_E100.
* Added ethtool ETHTOOL_PHYS_ID support
* Made ethtool WoL advertisement more selective on h/w controller
version.

MAINTAINERS

@@ -795,6 +795,11 @@ P:	Tigran Aivazian
 M:	tigran@veritas.com
 S:	Maintained
 
+INTEL PRO/100 ETHERNET SUPPORT
+P:	Scott Feldman
+M:	scott.feldman@intel.com
+S:	Supported
+
 INTEL PRO/1000 GIGABIT ETHERNET SUPPORT
 P:	Chris Leech
 M:	christopher.leech@intel.com

drivers/net/Config.help

@@ -1358,6 +1358,80 @@ CONFIG_EEPRO100
   a module, say M here and read <file:Documentation/modules.txt> as
   well as <file:Documentation/networking/net-modules.txt>.
 
+CONFIG_E100
+  This driver supports Intel(R) PRO/100 family of adapters, which 
+  includes:
+
+     Controller  Adapter Name                       Board IDs
+     ----------  ------------                       ---------
+
+     82558       PRO/100+ PCI Adapter               668081-xxx, 
+                                                    689661-xxx
+     82558       PRO/100+ Management Adapter        691334-xxx, 
+                                                    701738-xxx,
+                                                    721383-xxx
+     82558       PRO/100+ Dual Port Server Adapter  714303-xxx, 
+                                                    711269-xxx, 
+                                                    A28276-xxx
+     82558       PRO/100+ PCI Server Adapter        710550-xxx
+     82550       PRO/100 S Server Adapter           752438-xxx
+     82559                                          A56831-xxx, 
+                                                    A10563-xxx,
+                                                    A12171-xxx, 
+                                                    A12321-xxx, 
+                                                    A12320-xxx, 
+                                                    A12170-xxx
+                                                    748568-xxx
+                                                    748565-xxx
+     82550       PRO/100 S Desktop Adapter          751767-xxx
+     82559                                          748592-xxx, 
+                                                    A12167-xxx, 
+                                                    A12318-xxx, 
+                                                    A12317-xxx, 
+                                                    A12165-xxx,
+                                                    748569-xxx 
+     82559       PRO/100+ Server Adapter            729757-xxx
+     82559       PRO/100 S Management Adapter       748566-xxx, 
+                                                    748564-xxx
+     82550       PRO/100 S Dual Port Server Adapter A56831-xxx
+     82551       PRO/100 M Desktop Adapter          A80897-xxx
+                 PRO/100 S Advanced Management Adapter 
+                                                    747842-xxx, 
+                                                    745171-xxx
+     CNR         PRO/100 VE Desktop Adapter         A10386-xxx, 
+                                                    A10725-xxx, 
+                                                    A23801-xxx, 
+                                                    A19716-xxx
+                 PRO/100 VM Desktop Adapter         A14323-xxx, 
+                                                    A19725-xxx, 
+                                                    A23801-xxx, 
+                                                    A22220-xxx, 
+                                                    A23796-xxx
+   
+
+  To verify that your adapter is supported, find the board ID number 
+  on the adapter. Look for a label that has a barcode and a number 
+  in the format 123456-001 (six digits hyphen three digits). Match 
+  this to the list of numbers above.
+
+  For more information on how to identify your adapter, go to the 
+  Adapter & Driver ID Guide at:
+
+    http://support.intel.com/support/network/adapter/pro100/21397.htm
+
+  For the latest Intel PRO/100 network driver for Linux, see:
+
+    http://appsr.intel.com/scripts-df/support_intel.asp
+
+  More specific information on configuring the driver is in 
+  <file:Documentation/networking/e100.txt>.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  The module will be called e100.o.  If you want to compile it as a
+  module, say M here and read <file:Documentation/modules.txt> as well
+  as <file:Documentation/networking/net-modules.txt>.
+
 CONFIG_FEALNX
   Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet
   cards. Specifications and data at

drivers/net/e100/e100.h

@@ -503,6 +503,7 @@ enum led_state_e {
 #define IS_BACHELOR        0x00000010	/* set if 82558 or newer board */
 #define IS_ICH             0x00000020
 #define DF_SPEED_FORCED    0x00000040	/* set if speed is forced */
+#define LED_IS_ON	   0x00000080	/* LED is turned ON by the driver */
 
 typedef struct net_device_stats net_dev_stats_t;
 
@@ -909,7 +910,6 @@ struct ethtool_lpbk_data{
 };
 #endif
 
-
 struct e100_private {
 	u32 flags;		/* board management flags */
 	u32 tx_per_underrun;	/* number of good tx frames per underrun */
@@ -999,7 +999,10 @@ struct e100_private {
 	u16 ip_lbytes;
 #endif
 #ifdef ETHTOOL_TEST 
-struct ethtool_lpbk_data loopback;
+	struct ethtool_lpbk_data loopback;
+#endif
+#ifdef ETHTOOL_PHYS_ID
+	struct timer_list blink_timer;	/* led blink timer id */
 #endif
 
 #ifdef CONFIG_PM

drivers/net/e100/e100_config.c

@@ -593,7 +593,6 @@ e100_config_wol(struct e100_private *bdp)
 }
 #endif
 
-#ifdef ETHTOOL_TEST
 /**
  * e100_config_loopback_mode
  * @bdp: atapter's private data struct
@@ -690,5 +689,4 @@ e100_config_dynamic_tbd(struct e100_private *bdp, unsigned char enable)
  
         return bc_changed;
 }
-#endif
 

drivers/net/e100/e100_main.c

@@ -163,6 +163,9 @@ static char *test_strings[] = {
 	"E100_LPBK_PHY_FAIL"
 };
 
+#endif
+#ifdef	ETHTOOL_PHYS_ID
+static int e100_ethtool_led_blink(struct net_device *, struct ifreq *);
 #endif
 #endif /*E100_ETHTOOL_IOCTL */
 
@@ -182,7 +185,7 @@ static void e100_non_tx_background(unsigned long);
 /* Global Data structures and variables */
 char e100_copyright[] __devinitdata = "Copyright (c) 2002 Intel Corporation";
 
-#define E100_VERSION  "2.0.27-pre3"
+#define E100_VERSION  "2.0.30-k1"
 
 #define E100_FULL_DRIVER_NAME 	"Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver "
 
@@ -691,9 +694,10 @@ e100_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
 #ifdef ETHTOOL_GWOL
 	/* Disabling all WOLs as initialization */
 	bdp->wolsupported = bdp->wolopts = 0;
-	if (bdp->rev_id >= D101MA_REV_ID) {
-		bdp->wolsupported =
-			WAKE_PHY | WAKE_UCAST | WAKE_ARP | WAKE_MAGIC;
+	if (bdp->rev_id >= D101A4_REV_ID) {
+		bdp->wolsupported = WAKE_PHY | WAKE_MAGIC;
+		if (bdp->rev_id >= D101MA_REV_ID)
+			bdp->wolsupported |= WAKE_UCAST | WAKE_ARP;
 		bdp->wolopts = WAKE_MAGIC;
 	}
 #endif
@@ -3334,6 +3338,11 @@ e100_do_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr)
 	case ETHTOOL_GSTRINGS:
 		rc = e100_ethtool_gstrings(dev,ifr);
 		break;
+#endif
+#ifdef	ETHTOOL_PHYS_ID
+	case ETHTOOL_PHYS_ID:
+		rc = e100_ethtool_led_blink(dev,ifr);
+		break;
 #endif
 	default:
 		break;
@@ -3641,6 +3650,94 @@ e100_ethtool_eeprom(struct net_device *dev, struct ifreq *ifr)
 }
 #endif
 
+#ifdef ETHTOOL_PHYS_ID
+#define E100_BLINK_INTERVAL	(HZ/4)
+/**
+ * e100_led_control
+ * @bdp: atapter's private data struct
+ * @led_mdi_op: led operation
+ *
+ * Software control over adapter's led. The possible operations are:
+ * TURN LED OFF, TURN LED ON and RETURN LED CONTROL TO HARDWARE.
+ */
+static void
+e100_led_control(struct e100_private *bdp, u16 led_mdi_op)
+{
+	spin_lock_bh(&bdp->mdi_access_lock);
+
+	e100_mdi_write(bdp, PHY_82555_LED_SWITCH_CONTROL,
+		       bdp->phy_addr, led_mdi_op);
+
+	spin_unlock_bh(&bdp->mdi_access_lock);
+}
+/**
+ * e100_led_blink_callback
+ * @data: pointer to atapter's private data struct
+ *
+ * Blink timer callback function. Toggles ON/OFF led status bit and calls
+ * led hardware access function. 
+ */
+static void
+e100_led_blink_callback(unsigned long data)
+{
+	struct e100_private *bdp = (struct e100_private *) data;
+
+	if(bdp->flags & LED_IS_ON) {
+		bdp->flags &= ~LED_IS_ON;
+		e100_led_control(bdp, PHY_82555_LED_OFF);
+	} else {
+		bdp->flags |= LED_IS_ON;
+		if (bdp->rev_id >= D101MA_REV_ID)
+			e100_led_control(bdp, PHY_82555_LED_ON_559);
+		else
+			e100_led_control(bdp, PHY_82555_LED_ON_PRE_559);
+	}
+
+	mod_timer(&bdp->blink_timer, jiffies + E100_BLINK_INTERVAL);
+}
+/**
+ * e100_ethtool_led_blink
+ * @dev: pointer to atapter's net_device struct
+ * @ifr: pointer to ioctl request structure
+ *
+ * Blink led ioctl handler. Initialtes blink timer and sleeps until
+ * blink period expires. Than it kills timer and returns. The led control
+ * is returned back to hardware when blink timer is killed.
+ */
+static int
+e100_ethtool_led_blink(struct net_device *dev, struct ifreq *ifr)
+{
+	struct e100_private *bdp;
+	struct ethtool_value ecmd;
+
+	bdp = dev->priv;
+
+	if (copy_from_user(&ecmd, ifr->ifr_data, sizeof (ecmd)))
+		return -EFAULT;
+
+	if(!bdp->blink_timer.function) {
+		init_timer(&bdp->blink_timer);
+		bdp->blink_timer.function = e100_led_blink_callback;
+		bdp->blink_timer.data = (unsigned long) bdp;
+	}
+
+	mod_timer(&bdp->blink_timer, jiffies);
+
+	set_current_state(TASK_INTERRUPTIBLE);
+
+	if ((!ecmd.data) || (ecmd.data > MAX_SCHEDULE_TIMEOUT / HZ))
+		ecmd.data = MAX_SCHEDULE_TIMEOUT / HZ;
+
+	schedule_timeout(ecmd.data * HZ);
+
+	del_timer_sync(&bdp->blink_timer);
+
+	e100_led_control(bdp, PHY_82555_LED_NORMAL_CONTROL);
+
+	return 0;
+}
+#endif
+
 static inline int __devinit
 e100_10BaseT_adapter(struct e100_private *bdp)
 {

drivers/net/e100/e100_proc.c

@@ -548,7 +548,7 @@ read_bundle_max_def(char *page, char **start, off_t off,
 	int len;
 
 	len = read_int_param(page, "CPU Saver Maximum Bundle",
-			     "Sets the value for CPU saver's maximum value",
+			     "Sets CPU saver's maximum value",
 			     E100_DEFAULT_CPUSAVER_BUNDLE_MAX, 0x1, 0xFFFF);
 
 	return generic_read(page, start, off, count, eof, len);

drivers/net/e100/e100_test.c

@@ -69,6 +69,7 @@ AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR
 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *******************************************************************************/
+
 #include "e100.h"
 #include "e100_config.h"
 #ifdef ETHTOOL_TEST
@@ -458,10 +459,3 @@ e100_diag_loopback_free (struct e100_private *bdp)
 
 #endif
 
-
-
-
-
-
-
-