Commit a92c344d authored by Rodolfo Giometti's avatar Rodolfo Giometti Committed by Jean Delvare

i2c: Add support for the TSL2550

Add support for Taos TSL2550 ambient light sensors.
(http://www.taosinc.com/product_detail.asp?cateid=4&proid=18).
Signed-off-by: default avatarRodolfo Giometti <giometti@linux.it>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 066af983
......@@ -143,4 +143,14 @@ config SENSORS_MAX6875
This driver can also be built as a module. If so, the module
will be called max6875.
config SENSORS_TSL2550
tristate "Taos TSL2550 ambient light sensor"
depends on EXPERIMENTAL
help
If you say yes here you get support for the Taos TSL2550
ambient light sensor.
This driver can also be built as a module. If so, the module
will be called tsl2550.
endmenu
......@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
......
/*
* tsl2550.c - Linux kernel modules for ambient light sensor
*
* Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
* Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <linux/delay.h>
#define TSL2550_DRV_NAME "tsl2550"
#define DRIVER_VERSION "1.1.0"
/*
* Defines
*/
#define TSL2550_POWER_DOWN 0x00
#define TSL2550_POWER_UP 0x03
#define TSL2550_STANDARD_RANGE 0x18
#define TSL2550_EXTENDED_RANGE 0x1d
#define TSL2550_READ_ADC0 0x43
#define TSL2550_READ_ADC1 0x83
/*
* Structs
*/
struct tsl2550_data {
struct i2c_client *client;
struct mutex update_lock;
unsigned int power_state : 1;
unsigned int operating_mode : 1;
};
/*
* Global data
*/
static const u8 TSL2550_MODE_RANGE[2] = {
TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE,
};
/*
* Management functions
*/
static int tsl2550_set_operating_mode(struct i2c_client *client, int mode)
{
struct tsl2550_data *data = i2c_get_clientdata(client);
int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]);
data->operating_mode = mode;
return ret;
}
static int tsl2550_set_power_state(struct i2c_client *client, int state)
{
struct tsl2550_data *data = i2c_get_clientdata(client);
int ret;
if (state == 0)
ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN);
else {
ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
/* On power up we should reset operating mode also... */
tsl2550_set_operating_mode(client, data->operating_mode);
}
data->power_state = state;
return ret;
}
static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
{
unsigned long end;
int loop = 0, ret = 0;
/*
* Read ADC channel waiting at most 400ms (see data sheet for further
* info).
* To avoid long busy wait we spin for few milliseconds then
* start sleeping.
*/
end = jiffies + msecs_to_jiffies(400);
while (time_before(jiffies, end)) {
i2c_smbus_write_byte(client, cmd);
if (loop++ < 5)
mdelay(1);
else
msleep(1);
ret = i2c_smbus_read_byte(client);
if (ret < 0)
return ret;
else if (ret & 0x0080)
break;
}
if (!(ret & 0x80))
return -EIO;
return ret & 0x7f; /* remove the "valid" bit */
}
/*
* LUX calculation
*/
#define TSL2550_MAX_LUX 1846
static const u8 ratio_lut[] = {
100, 100, 100, 100, 100, 100, 100, 100,
100, 100, 100, 100, 100, 100, 99, 99,
99, 99, 99, 99, 99, 99, 99, 99,
99, 99, 99, 98, 98, 98, 98, 98,
98, 98, 97, 97, 97, 97, 97, 96,
96, 96, 96, 95, 95, 95, 94, 94,
93, 93, 93, 92, 92, 91, 91, 90,
89, 89, 88, 87, 87, 86, 85, 84,
83, 82, 81, 80, 79, 78, 77, 75,
74, 73, 71, 69, 68, 66, 64, 62,
60, 58, 56, 54, 52, 49, 47, 44,
42, 41, 40, 40, 39, 39, 38, 38,
37, 37, 37, 36, 36, 36, 35, 35,
35, 35, 34, 34, 34, 34, 33, 33,
33, 33, 32, 32, 32, 32, 32, 31,
31, 31, 31, 31, 30, 30, 30, 30,
30,
};
static const u16 count_lut[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 18, 20, 22, 24, 26, 28, 30,
32, 34, 36, 38, 40, 42, 44, 46,
49, 53, 57, 61, 65, 69, 73, 77,
81, 85, 89, 93, 97, 101, 105, 109,
115, 123, 131, 139, 147, 155, 163, 171,
179, 187, 195, 203, 211, 219, 227, 235,
247, 263, 279, 295, 311, 327, 343, 359,
375, 391, 407, 423, 439, 455, 471, 487,
511, 543, 575, 607, 639, 671, 703, 735,
767, 799, 831, 863, 895, 927, 959, 991,
1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487,
1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999,
2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991,
3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015,
};
/*
* This function is described into Taos TSL2550 Designer's Notebook
* pages 2, 3.
*/
static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
{
unsigned int lux;
/* Look up count from channel values */
u16 c0 = count_lut[ch0];
u16 c1 = count_lut[ch1];
/*
* Calculate ratio.
* Note: the "128" is a scaling factor
*/
u8 r = 128;
/* Avoid division by 0 and count 1 cannot be greater than count 0 */
if (c0 && (c1 <= c0))
r = c1 * 128 / c0;
else
return -1;
/* Calculate LUX */
lux = ((c0 - c1) * ratio_lut[r]) / 256;
/* LUX range check */
return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
}
/*
* SysFS support
*/
static ssize_t tsl2550_show_power_state(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
return sprintf(buf, "%u\n", data->power_state);
}
static ssize_t tsl2550_store_power_state(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct tsl2550_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
int ret;
if (val < 0 || val > 1)
return -EINVAL;
mutex_lock(&data->update_lock);
ret = tsl2550_set_power_state(client, val);
mutex_unlock(&data->update_lock);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
tsl2550_show_power_state, tsl2550_store_power_state);
static ssize_t tsl2550_show_operating_mode(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
return sprintf(buf, "%u\n", data->operating_mode);
}
static ssize_t tsl2550_store_operating_mode(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct tsl2550_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
int ret;
if (val < 0 || val > 1)
return -EINVAL;
if (data->power_state == 0)
return -EBUSY;
mutex_lock(&data->update_lock);
ret = tsl2550_set_operating_mode(client, val);
mutex_unlock(&data->update_lock);
if (ret < 0)
return ret;
return count;
}
static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
tsl2550_show_operating_mode, tsl2550_store_operating_mode);
static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
{
u8 ch0, ch1;
int ret;
ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0);
if (ret < 0)
return ret;
ch0 = ret;
mdelay(1);
ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
if (ret < 0)
return ret;
ch1 = ret;
/* Do the job */
ret = tsl2550_calculate_lux(ch0, ch1);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", ret);
}
static ssize_t tsl2550_show_lux1_input(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
struct tsl2550_data *data = i2c_get_clientdata(client);
int ret;
/* No LUX data if not operational */
if (!data->power_state)
return -EBUSY;
mutex_lock(&data->update_lock);
ret = __tsl2550_show_lux(client, buf);
mutex_unlock(&data->update_lock);
return ret;
}
static DEVICE_ATTR(lux1_input, S_IRUGO,
tsl2550_show_lux1_input, NULL);
static struct attribute *tsl2550_attributes[] = {
&dev_attr_power_state.attr,
&dev_attr_operating_mode.attr,
&dev_attr_lux1_input.attr,
NULL
};
static const struct attribute_group tsl2550_attr_group = {
.attrs = tsl2550_attributes,
};
/*
* Initialization function
*/
static void tsl2550_init_client(struct i2c_client *client)
{
struct tsl2550_data *data = i2c_get_clientdata(client);
/* Power up the device and set the default operating mode */
tsl2550_set_power_state(client, 1);
tsl2550_set_operating_mode(client, data->operating_mode);
}
/*
* I2C init/probing/exit functions
*/
static struct i2c_driver tsl2550_driver;
static int __devinit tsl2550_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct tsl2550_data *data;
int *opmode, err = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
err = -EIO;
goto exit;
}
data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
data->client = client;
i2c_set_clientdata(client, data);
/* Check platform data */
opmode = client->dev.platform_data;
if (opmode) {
if (*opmode < 0 || *opmode > 1) {
dev_err(&client->dev, "invalid operating_mode (%d)\n",
*opmode);
err = -EINVAL;
goto exit_kfree;
}
data->operating_mode = *opmode;
} else
data->operating_mode = 0; /* default mode is standard */
dev_info(&client->dev, "%s operating mode\n",
data->operating_mode ? "extended" : "standard");
/*
* Probe the chip. To do so we try to power up the device and then to
* read back the 0x03 code
*/
err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
if (err < 0)
goto exit_kfree;
mdelay(1);
err = i2c_smbus_read_byte(client);
if (err != TSL2550_POWER_UP) {
err = -ENODEV;
goto exit_kfree;
}
mutex_init(&data->update_lock);
/* Initialize the TSL2550 chip */
tsl2550_init_client(client);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
if (err)
goto exit_kfree;
dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
return 0;
exit_kfree:
kfree(data);
exit:
return err;
}
static int __devexit tsl2550_remove(struct i2c_client *client)
{
sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
/* Power down the device */
tsl2550_set_power_state(client, 0);
kfree(i2c_get_clientdata(client));
return 0;
}
static struct i2c_driver tsl2550_driver = {
.driver = {
.name = TSL2550_DRV_NAME,
.owner = THIS_MODULE,
},
.probe = tsl2550_probe,
.remove = __devexit_p(tsl2550_remove),
};
static int __init tsl2550_init(void)
{
return i2c_add_driver(&tsl2550_driver);
}
static void __exit tsl2550_exit(void)
{
i2c_del_driver(&tsl2550_driver);
}
MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
MODULE_DESCRIPTION("TSL2550 ambient light sensor driver");
MODULE_LICENSE("GPL");
module_init(tsl2550_init);
module_exit(tsl2550_exit);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment