Merge tag 'devel-samsung-for-v3.10' of...

Merge tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

From Kukjin Kim <kgene.kim@samsung.com>:

including various development for samsung for v3.10

* tag 'devel-samsung-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: replace cpumask by the corresponding macro
  ARM: EXYNOS: handle properly the return values
  ARM: EXYNOS: factor out the idle states
  ARM: SAMSUNG: check processor type before cache restoration in resume
  ARM: S3C64XX: Slow down mic detection rate for wm5102
  ARM: S3C64XX: Clear DMA flags on channel request
  ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend
  ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
  ARM: EXYNOS: Add support for rtc wakeup
  ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-exynos/common.c

@@ -463,6 +463,8 @@ void __init exynos4_init_irq(void)
 	 * uses GIC instead of VIC.
 	 */
 	s5p_init_irq(NULL, 0);
+
+	gic_arch_extn.irq_set_wake = s3c_irq_wake;
 }
 
 void __init exynos5_init_irq(void)

arch/arm/mach-exynos/cpuidle.c

@@ -41,7 +41,13 @@ static int exynos4_enter_lowpower(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index);
 
-static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
+static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
+
+static struct cpuidle_driver exynos4_idle_driver = {
+	.name			= "exynos4_idle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
+	.states = {
 		[0] = ARM_CPUIDLE_WFI_STATE,
 		[1] = {
 			.enter			= exynos4_enter_lowpower,
@@ -51,14 +57,9 @@ static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
 			.name			= "C1",
 			.desc			= "ARM power down",
 		},
-};
-
-static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
-
-static struct cpuidle_driver exynos4_idle_driver = {
-	.name			= "exynos4_idle",
-	.owner			= THIS_MODULE,
-	.en_core_tk_irqen	= 1,
+	},
+	.state_count = 2,
+	.safe_state_index = 0,
 };
 
 /* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
@@ -193,37 +194,30 @@ static void __init exynos5_core_down_clk(void)
 
 static int __init exynos4_init_cpuidle(void)
 {
-	int i, max_cpuidle_state, cpu_id;
+	int cpu_id, ret;
 	struct cpuidle_device *device;
-	struct cpuidle_driver *drv = &exynos4_idle_driver;
 
 	if (soc_is_exynos5250())
 		exynos5_core_down_clk();
 
-	/* Setup cpuidle driver */
-	drv->state_count = (sizeof(exynos4_cpuidle_set) /
-				       sizeof(struct cpuidle_state));
-	max_cpuidle_state = drv->state_count;
-	for (i = 0; i < max_cpuidle_state; i++) {
-		memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
-				sizeof(struct cpuidle_state));
+	ret = cpuidle_register_driver(&exynos4_idle_driver);
+	if (ret) {
+		printk(KERN_ERR "CPUidle failed to register driver\n");
+		return ret;
 	}
-	drv->safe_state_index = 0;
-	cpuidle_register_driver(&exynos4_idle_driver);
 
-	for_each_cpu(cpu_id, cpu_online_mask) {
+	for_each_online_cpu(cpu_id) {
 		device = &per_cpu(exynos4_cpuidle_device, cpu_id);
 		device->cpu = cpu_id;
 
-		if (cpu_id == 0)
-			device->state_count = (sizeof(exynos4_cpuidle_set) /
-					       sizeof(struct cpuidle_state));
-		else
-			device->state_count = 1;	/* Support IDLE only */
+		/* Support IDLE only */
+		if (cpu_id != 0)
+			device->state_count = 1;
 
-		if (cpuidle_register_device(device)) {
-			printk(KERN_ERR "CPUidle register device failed\n,");
-			return -EIO;
+		ret = cpuidle_register_device(device);
+		if (ret) {
+			printk(KERN_ERR "CPUidle register device failed\n");
+			return ret;
 		}
 	}
 

arch/arm/mach-exynos/include/mach/pm-core.h

@@ -27,13 +27,8 @@ static inline void s3c_pm_debug_init_uart(void)
 
 static inline void s3c_pm_arch_prepare_irqs(void)
 {
-	unsigned int tmp;
-	tmp = __raw_readl(S5P_WAKEUP_MASK);
-	tmp &= ~(1 << 31);
-	__raw_writel(tmp, S5P_WAKEUP_MASK);
-
-	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
-	__raw_writel(s3c_irqwake_eintmask & 0xFFFFFFFE, S5P_EINT_WAKEUP_MASK);
+	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+	__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
 }
 
 static inline void s3c_pm_arch_stop_clocks(void)

arch/arm/mach-s3c64xx/dma.c

@@ -509,6 +509,7 @@ int s3c2410_dma_request(enum dma_ch channel,
 	chan->client = client;
 	chan->in_use = 1;
 	chan->peripheral = channel;
+	chan->flags = 0;
 
 	local_irq_restore(flags);
 

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -210,6 +210,7 @@ static struct arizona_pdata wm5102_reva_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_active_high = true,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
+	.micd_rate = 6,
 	.gpio_defaults = {
 		[2] = 0x10000, /* AIF3TXLRCLK */
 		[3] = 0x4,     /* OPCLK */

arch/arm/plat-samsung/s5p-sleep.S

@@ -25,6 +25,9 @@
 #include <asm/asm-offsets.h>
 #include <asm/hardware/cache-l2x0.h>
 
+#define CPU_MASK	0xff0ffff0
+#define CPU_CORTEX_A9	0x410fc090
+
 /*
  *	 The following code is located into the .data section. This is to
  *	 allow l2x0_regs_phys to be accessed with a relative load while we
@@ -51,6 +54,12 @@
 
 ENTRY(s3c_cpu_resume)
 #ifdef CONFIG_CACHE_L2X0
+	mrc	p15, 0, r0, c0, c0, 0
+	ldr	r1, =CPU_MASK
+	and	r0, r0, r1
+	ldr	r1, =CPU_CORTEX_A9
+	cmp	r0, r1
+	bne	resume_l2on
 	adr	r0, l2x0_regs_phys
 	ldr	r0, [r0]
 	ldr	r1, [r0, #L2X0_R_PHY_BASE]

arch/arm/plat-samsung/setup-mipiphy.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -50,8 +51,10 @@ int s5p_csis_phy_enable(int id, bool on)
 {
 	return __s5p_mipi_phy_control(id, on, S5P_MIPI_DPHY_SRESETN);
 }
+EXPORT_SYMBOL(s5p_csis_phy_enable);
 
 int s5p_dsim_phy_enable(struct platform_device *pdev, bool on)
 {
 	return __s5p_mipi_phy_control(pdev->id, on, S5P_MIPI_DPHY_MRESETN);
 }
+EXPORT_SYMBOL(s5p_dsim_phy_enable);