Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
Regarding the Bluetooth bits, Gustavo says:

"First Bluetooth fixes to 3.12, it includes:

* 3 patches to add device id for 3 new hardwares.

* 2 patches from Johan to fix the rfkill behaviour during setup stage

* a small clean up in the rfcomm TTY code that fixes a potential racy
condition (by Gianluca Anzolin)

* 2 fixes to proper set encryption key size and security level in the
peripheral role of Bluetooth LE devices. (by Andre Guedes)

* a fix for dealing devices where pairing is not necessary, we were keeping
the Bluetooth ACL connection alive for too much time. (by Syam Sidhardhan)"

Also, I fixed-up an curly-brace indentation problem in the Bluetooth
code while merging.  On top of that...

Alexey Khoroshilov brings a p54usb fix to avoid a resource leak when
request_firmware_nowait fails.

Amitkumar Karwar fixes a firmware hang caused by too much header data
being appended for USB devices using the mwifiex driver.

Arend van Spriel provides three fixes: a brcmfmac fix to relocate some
driver code outside of an .init section; a scheduling while atomic
fix for bcma; and, another scheduling while atomic fix for brcmsmac.

Bing Zhao offers a pair of mwifiex fixes: a code change to avoid
firmware timeouts on USB; and a fix for a NULL pointer dereference.

Christian Lamparter adds a device ID to p54usb.

Felix Fietkau implements a quartet of small ath9k fixes, including
a locking fix, a list management fix, a fix to properly mark a stale
buffer, and an aggregate buffering fix.

Larry Finger champions a data alignment fix to make rtlwifi work
better with ARM builds.

Solomon Peachy reverts an earlier interrupt handling fix for cw1200
and replaces it with a new threaded oneshot irq handler implementation.

Sujith Manoharan fixes an ath9k regression by reverting an earlier
patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/bcma/driver_pci.c

@@ -210,25 +210,6 @@ static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc)
 	}
 }
 
-static void bcma_core_pci_power_save(struct bcma_drv_pci *pc, bool up)
-{
-	u16 data;
-
-	if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
-		data = up ? 0x74 : 0x7C;
-		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
-					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
-		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
-					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
-	} else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
-		data = up ? 0x75 : 0x7D;
-		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
-					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
-		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
-					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
-	}
-}
-
 /**************************************************
  * Init.
  **************************************************/
@@ -255,6 +236,32 @@ void bcma_core_pci_init(struct bcma_drv_pci *pc)
 		bcma_core_pci_clientmode_init(pc);
 }
 
+void bcma_core_pci_power_save(struct bcma_bus *bus, bool up)
+{
+	struct bcma_drv_pci *pc;
+	u16 data;
+
+	if (bus->hosttype != BCMA_HOSTTYPE_PCI)
+		return;
+
+	pc = &bus->drv_pci[0];
+
+	if (pc->core->id.rev >= 15 && pc->core->id.rev <= 20) {
+		data = up ? 0x74 : 0x7C;
+		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7F64);
+		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+	} else if (pc->core->id.rev >= 21 && pc->core->id.rev <= 22) {
+		data = up ? 0x75 : 0x7D;
+		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+					 BCMA_CORE_PCI_MDIO_BLK1_MGMT1, 0x7E65);
+		bcma_pcie_mdio_writeread(pc, BCMA_CORE_PCI_MDIO_BLK1,
+					 BCMA_CORE_PCI_MDIO_BLK1_MGMT3, data);
+	}
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_power_save);
+
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 			  bool enable)
 {
@@ -310,8 +317,6 @@ void bcma_core_pci_up(struct bcma_bus *bus)
 
 	pc = &bus->drv_pci[0];
 
-	bcma_core_pci_power_save(pc, true);
-
 	bcma_core_pci_extend_L1timer(pc, true);
 }
 EXPORT_SYMBOL_GPL(bcma_core_pci_up);
@@ -326,7 +331,5 @@ void bcma_core_pci_down(struct bcma_bus *bus)
 	pc = &bus->drv_pci[0];
 
 	bcma_core_pci_extend_L1timer(pc, false);
-
-	bcma_core_pci_power_save(pc, false);
 }
 EXPORT_SYMBOL_GPL(bcma_core_pci_down);

drivers/bluetooth/ath3k.c

@@ -85,6 +85,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x04CA, 0x3008) },
 	{ USB_DEVICE(0x13d3, 0x3362) },
 	{ USB_DEVICE(0x0CF3, 0xE004) },
+	{ USB_DEVICE(0x0CF3, 0xE005) },
 	{ USB_DEVICE(0x0930, 0x0219) },
 	{ USB_DEVICE(0x0489, 0xe057) },
 	{ USB_DEVICE(0x13d3, 0x3393) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -102,6 +102,7 @@ static struct usb_device_id btusb_table[] = {
 
 	/* Broadcom BCM20702A0 */
 	{ USB_DEVICE(0x0b05, 0x17b5) },
+	{ USB_DEVICE(0x0b05, 0x17cb) },
 	{ USB_DEVICE(0x04ca, 0x2003) },
 	{ USB_DEVICE(0x0489, 0xe042) },
 	{ USB_DEVICE(0x413c, 0x8197) },
@@ -112,6 +113,9 @@ static struct usb_device_id btusb_table[] = {
 	/*Broadcom devices with vendor specific id */
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) },
 
+	/* Belkin F8065bf - Broadcom based */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
+
 	{ }	/* Terminating entry */
 };
 
@@ -148,6 +152,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },

drivers/net/wireless/ath/ath9k/recv.c

@@ -1269,13 +1269,6 @@ static void ath9k_antenna_check(struct ath_softc *sc,
 	if (!(ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB))
 		return;
 
-	/*
-	 * All MPDUs in an aggregate will use the same LNA
-	 * as the first MPDU.
-	 */
-	if (rs->rs_isaggr && !rs->rs_firstaggr)
-		return;
-
 	/*
 	 * Change the default rx antenna if rx diversity
 	 * chooses the other antenna 3 times in a row.

drivers/net/wireless/ath/ath9k/xmit.c

@@ -399,6 +399,7 @@ static struct ath_buf* ath_clone_txbuf(struct ath_softc *sc, struct ath_buf *bf)
 	tbf->bf_buf_addr = bf->bf_buf_addr;
 	memcpy(tbf->bf_desc, bf->bf_desc, sc->sc_ah->caps.tx_desc_len);
 	tbf->bf_state = bf->bf_state;
+	tbf->bf_state.stale = false;
 
 	return tbf;
 }
@@ -1389,11 +1390,15 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 		      u16 tid, u16 *ssn)
 {
 	struct ath_atx_tid *txtid;
+	struct ath_txq *txq;
 	struct ath_node *an;
 	u8 density;
 
 	an = (struct ath_node *)sta->drv_priv;
 	txtid = ATH_AN_2_TID(an, tid);
+	txq = txtid->ac->txq;
+
+	ath_txq_lock(sc, txq);
 
 	/* update ampdu factor/density, they may have changed. This may happen
 	 * in HT IBSS when a beacon with HT-info is received after the station
@@ -1417,6 +1422,8 @@ int ath_tx_aggr_start(struct ath_softc *sc, struct ieee80211_sta *sta,
 	memset(txtid->tx_buf, 0, sizeof(txtid->tx_buf));
 	txtid->baw_head = txtid->baw_tail = 0;
 
+	ath_txq_unlock_complete(sc, txq);
+
 	return 0;
 }
 
@@ -1555,8 +1562,10 @@ void ath9k_release_buffered_frames(struct ieee80211_hw *hw,
 			__skb_unlink(bf->bf_mpdu, tid_q);
 			list_add_tail(&bf->list, &bf_q);
 			ath_set_rates(tid->an->vif, tid->an->sta, bf);
+			if (bf_isampdu(bf)) {
 				ath_tx_addto_baw(sc, tid, bf);
 				bf->bf_state.bf_type &= ~BUF_AGGR;
+			}
 			if (bf_tail)
 				bf_tail->bf_next = bf;
 
@@ -1950,7 +1959,9 @@ static void ath_tx_txqaddbuf(struct ath_softc *sc, struct ath_txq *txq,
 			if (bf_is_ampdu_not_probing(bf))
 				txq->axq_ampdu_depth++;
 
-			bf = bf->bf_lastbf->bf_next;
+			bf_last = bf->bf_lastbf;
+			bf = bf_last->bf_next;
+			bf_last->bf_next = NULL;
 		}
 	}
 }

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c

@@ -464,8 +464,6 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 
 static int brcmf_sdio_pd_probe(struct platform_device *pdev)
 {
-	int ret;
-
 	brcmf_dbg(SDIO, "Enter\n");
 
 	brcmfmac_sdio_pdata = pdev->dev.platform_data;
@@ -473,11 +471,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev)
 	if (brcmfmac_sdio_pdata->power_on)
 		brcmfmac_sdio_pdata->power_on();
 
-	ret = sdio_register_driver(&brcmf_sdmmc_driver);
-	if (ret)
-		brcmf_err("sdio_register_driver failed: %d\n", ret);
-
-	return ret;
+	return 0;
 }
 
 static int brcmf_sdio_pd_remove(struct platform_device *pdev)
@@ -500,6 +494,15 @@ static struct platform_driver brcmf_sdio_pd = {
 	}
 };
 
+void brcmf_sdio_register(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&brcmf_sdmmc_driver);
+	if (ret)
+		brcmf_err("sdio_register_driver failed: %d\n", ret);
+}
+
 void brcmf_sdio_exit(void)
 {
 	brcmf_dbg(SDIO, "Enter\n");
@@ -510,18 +513,13 @@ void brcmf_sdio_exit(void)
 		sdio_unregister_driver(&brcmf_sdmmc_driver);
 }
 
-void brcmf_sdio_init(void)
+void __init brcmf_sdio_init(void)
 {
 	int ret;
 
 	brcmf_dbg(SDIO, "Enter\n");
 
 	ret = platform_driver_probe(&brcmf_sdio_pd, brcmf_sdio_pd_probe);
-	if (ret == -ENODEV) {
-		brcmf_dbg(SDIO, "No platform data available, registering without.\n");
-		ret = sdio_register_driver(&brcmf_sdmmc_driver);
-	}
-
-	if (ret)
-		brcmf_err("driver registration failed: %d\n", ret);
+	if (ret == -ENODEV)
+		brcmf_dbg(SDIO, "No platform data available.\n");
 }

drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h

@@ -156,10 +156,11 @@ extern int brcmf_bus_start(struct device *dev);
 #ifdef CONFIG_BRCMFMAC_SDIO
 extern void brcmf_sdio_exit(void);
 extern void brcmf_sdio_init(void);
+extern void brcmf_sdio_register(void);
 #endif
 #ifdef CONFIG_BRCMFMAC_USB
 extern void brcmf_usb_exit(void);
-extern void brcmf_usb_init(void);
+extern void brcmf_usb_register(void);
 #endif
 
 #endif				/* _BRCMF_BUS_H_ */

drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c

@@ -1231,21 +1231,23 @@ u32 brcmf_get_chip_info(struct brcmf_if *ifp)
 	return bus->chip << 4 | bus->chiprev;
 }
 
-static void brcmf_driver_init(struct work_struct *work)
+static void brcmf_driver_register(struct work_struct *work)
 {
-	brcmf_debugfs_init();
-
 #ifdef CONFIG_BRCMFMAC_SDIO
-	brcmf_sdio_init();
+	brcmf_sdio_register();
 #endif
 #ifdef CONFIG_BRCMFMAC_USB
-	brcmf_usb_init();
+	brcmf_usb_register();
 #endif
 }
-static DECLARE_WORK(brcmf_driver_work, brcmf_driver_init);
+static DECLARE_WORK(brcmf_driver_work, brcmf_driver_register);
 
 static int __init brcmfmac_module_init(void)
 {
+	brcmf_debugfs_init();
+#ifdef CONFIG_BRCMFMAC_SDIO
+	brcmf_sdio_init();
+#endif
 	if (!schedule_work(&brcmf_driver_work))
 		return -EBUSY;
 

drivers/net/wireless/brcm80211/brcmfmac/usb.c

@@ -1539,7 +1539,7 @@ void brcmf_usb_exit(void)
 	brcmf_release_fw(&fw_image_list);
 }
 
-void brcmf_usb_init(void)
+void brcmf_usb_register(void)
 {
 	brcmf_dbg(USB, "Enter\n");
 	INIT_LIST_HEAD(&fw_image_list);

drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

@@ -457,6 +457,8 @@ static int brcms_ops_start(struct ieee80211_hw *hw)
 	if (err != 0)
 		brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 			  __func__, err);
+
+	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
 	return err;
 }
 
@@ -479,6 +481,8 @@ static void brcms_ops_stop(struct ieee80211_hw *hw)
 		return;
 	}
 
+	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
+
 	/* put driver in down state */
 	spin_lock_bh(&wl->lock);
 	brcms_down(wl);

drivers/net/wireless/cw1200/cw1200_spi.c

@@ -42,7 +42,6 @@ struct hwbus_priv {
 	spinlock_t		lock; /* Serialize all bus operations */
 	wait_queue_head_t       wq;
 	int claimed;
-	int irq_disabled;
 };
 
 #define SDIO_TO_SPI_ADDR(addr) ((addr & 0x1f)>>2)
@@ -238,8 +237,6 @@ static irqreturn_t cw1200_spi_irq_handler(int irq, void *dev_id)
 	struct hwbus_priv *self = dev_id;
 
 	if (self->core) {
-		disable_irq_nosync(self->func->irq);
-		self->irq_disabled = 1;
 		cw1200_irq_handler(self->core);
 		return IRQ_HANDLED;
 	} else {
@@ -253,8 +250,9 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self)
 
 	pr_debug("SW IRQ subscribe\n");
 
-	ret = request_any_context_irq(self->func->irq, cw1200_spi_irq_handler,
-				      IRQF_TRIGGER_HIGH,
+	ret = request_threaded_irq(self->func->irq, NULL,
+				   cw1200_spi_irq_handler,
+				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
 				   "cw1200_wlan_irq", self);
 	if (WARN_ON(ret < 0))
 		goto exit;
@@ -273,22 +271,13 @@ static int cw1200_spi_irq_subscribe(struct hwbus_priv *self)
 
 static int cw1200_spi_irq_unsubscribe(struct hwbus_priv *self)
 {
+	int ret = 0;
+
 	pr_debug("SW IRQ unsubscribe\n");
 	disable_irq_wake(self->func->irq);
 	free_irq(self->func->irq, self);
 
-	return 0;
-}
-
-static int cw1200_spi_irq_enable(struct hwbus_priv *self, int enable)
-{
-	/* Disables are handled by the interrupt handler */
-	if (enable && self->irq_disabled) {
-		enable_irq(self->func->irq);
-		self->irq_disabled = 0;
-	}
-
-	return 0;
+	return ret;
 }
 
 static int cw1200_spi_off(const struct cw1200_platform_data_spi *pdata)
@@ -368,7 +357,6 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = {
 	.unlock			= cw1200_spi_unlock,
 	.align_size		= cw1200_spi_align_size,
 	.power_mgmt		= cw1200_spi_pm,
-	.irq_enable             = cw1200_spi_irq_enable,
 };
 
 /* Probe Function to be called by SPI stack when device is discovered */

drivers/net/wireless/cw1200/fwio.c

@@ -485,7 +485,7 @@ int cw1200_load_firmware(struct cw1200_common *priv)
 
 	/* Enable interrupt signalling */
 	priv->hwbus_ops->lock(priv->hwbus_priv);
-	ret = __cw1200_irq_enable(priv, 2);
+	ret = __cw1200_irq_enable(priv, 1);
 	priv->hwbus_ops->unlock(priv->hwbus_priv);
 	if (ret < 0)
 		goto unsubscribe;

drivers/net/wireless/cw1200/hwbus.h

@@ -28,7 +28,6 @@ struct hwbus_ops {
 	void (*unlock)(struct hwbus_priv *self);
 	size_t (*align_size)(struct hwbus_priv *self, size_t size);
 	int (*power_mgmt)(struct hwbus_priv *self, bool suspend);
-	int (*irq_enable)(struct hwbus_priv *self, int enable);
 };
 
 #endif /* CW1200_HWBUS_H */

drivers/net/wireless/cw1200/hwio.c

@@ -273,21 +273,6 @@ int __cw1200_irq_enable(struct cw1200_common *priv, int enable)
 	u16 val16;
 	int ret;
 
-	/* We need to do this hack because the SPI layer can sleep on I/O
-	   and the general path involves I/O to the device in interrupt
-	   context.
-
-	   However, the initial enable call needs to go to the hardware.
-
-	   We don't worry about shutdown because we do a full reset which
-	   clears the interrupt enabled bits.
-	*/
-	if (priv->hwbus_ops->irq_enable) {
-		ret = priv->hwbus_ops->irq_enable(priv->hwbus_priv, enable);
-		if (ret || enable < 2)
-			return ret;
-	}
-
 	if (HIF_8601_SILICON == priv->hw_type) {
 		ret = __cw1200_reg_read_32(priv, ST90TDS_CONFIG_REG_ID, &val32);
 		if (ret < 0) {

drivers/net/wireless/mwifiex/11n_aggr.c

@@ -150,7 +150,7 @@ mwifiex_11n_form_amsdu_txpd(struct mwifiex_private *priv,
  */
 int
 mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
-			  struct mwifiex_ra_list_tbl *pra_list, int headroom,
+			  struct mwifiex_ra_list_tbl *pra_list,
 			  int ptrindex, unsigned long ra_list_flags)
 			  __releases(&priv->wmm.ra_list_spinlock)
 {
@@ -160,6 +160,7 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
 	int pad = 0, ret;
 	struct mwifiex_tx_param tx_param;
 	struct txpd *ptx_pd = NULL;
+	int headroom = adapter->iface_type == MWIFIEX_USB ? 0 : INTF_HEADER_LEN;
 
 	skb_src = skb_peek(&pra_list->skb_head);
 	if (!skb_src) {

drivers/net/wireless/mwifiex/11n_aggr.h

@@ -26,7 +26,7 @@
 int mwifiex_11n_deaggregate_pkt(struct mwifiex_private *priv,
 				struct sk_buff *skb);
 int mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv,
-			      struct mwifiex_ra_list_tbl *ptr, int headroom,
+			      struct mwifiex_ra_list_tbl *ptr,
 			      int ptr_index, unsigned long flags)
 			      __releases(&priv->wmm.ra_list_spinlock);
 

drivers/net/wireless/mwifiex/cmdevt.c

@@ -1155,7 +1155,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
 	uint32_t conditions = le32_to_cpu(phs_cfg->params.hs_config.conditions);
 
 	if (phs_cfg->action == cpu_to_le16(HS_ACTIVATE) &&
-	    adapter->iface_type == MWIFIEX_SDIO) {
+	    adapter->iface_type != MWIFIEX_USB) {
 		mwifiex_hs_activated_event(priv, true);
 		return 0;
 	} else {
@@ -1167,8 +1167,7 @@ int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
 	}
 	if (conditions != HS_CFG_CANCEL) {
 		adapter->is_hs_configured = true;
-		if (adapter->iface_type == MWIFIEX_USB ||
-		    adapter->iface_type == MWIFIEX_PCIE)
+		if (adapter->iface_type == MWIFIEX_USB)
 			mwifiex_hs_activated_event(priv, true);
 	} else {
 		adapter->is_hs_configured = false;

drivers/net/wireless/mwifiex/usb.c

@@ -447,9 +447,6 @@ static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message)
 	 */
 	adapter->is_suspended = true;
 
-	for (i = 0; i < adapter->priv_num; i++)
-		netif_carrier_off(adapter->priv[i]->netdev);
-
 	if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb)
 		usb_kill_urb(card->rx_cmd.urb);
 
@@ -509,10 +506,6 @@ static int mwifiex_usb_resume(struct usb_interface *intf)
 						  MWIFIEX_RX_CMD_BUF_SIZE);
 	}
 
-	for (i = 0; i < adapter->priv_num; i++)
-		if (adapter->priv[i]->media_connected)
-			netif_carrier_on(adapter->priv[i]->netdev);
-
 	/* Disable Host Sleep */
 	if (adapter->hs_activated)
 		mwifiex_cancel_hs(mwifiex_get_priv(adapter,

drivers/net/wireless/mwifiex/wmm.c

@@ -1239,8 +1239,7 @@ mwifiex_dequeue_tx_packet(struct mwifiex_adapter *adapter)
 		if (enable_tx_amsdu && mwifiex_is_amsdu_allowed(priv, tid) &&
 		    mwifiex_is_11n_aggragation_possible(priv, ptr,
 							adapter->tx_buf_size))
-			mwifiex_11n_aggregate_pkt(priv, ptr, INTF_HEADER_LEN,
-						  ptr_index, flags);
+			mwifiex_11n_aggregate_pkt(priv, ptr, ptr_index, flags);
 			/* ra_list_spinlock has been freed in
 			   mwifiex_11n_aggregate_pkt() */
 		else

drivers/net/wireless/p54/p54usb.c

@@ -83,6 +83,7 @@ static struct usb_device_id p54u_table[] = {
 	{USB_DEVICE(0x06a9, 0x000e)},	/* Westell 802.11g USB (A90-211WG-01) */
 	{USB_DEVICE(0x06b9, 0x0121)},	/* Thomson SpeedTouch 121g */
 	{USB_DEVICE(0x0707, 0xee13)},   /* SMC 2862W-G version 2 */
+	{USB_DEVICE(0x07aa, 0x0020)},	/* Corega WLUSB2GTST USB */
 	{USB_DEVICE(0x0803, 0x4310)},	/* Zoom 4410a */
 	{USB_DEVICE(0x083a, 0x4521)},   /* Siemens Gigaset USB Adapter 54 version 2 */
 	{USB_DEVICE(0x083a, 0x4531)},	/* T-Com Sinus 154 data II */
@@ -979,6 +980,7 @@ static int p54u_load_firmware(struct ieee80211_hw *dev,
 	if (err) {
 		dev_err(&priv->udev->dev, "(p54usb) cannot load firmware %s "
 					  "(%d)!\n", p54u_fwlist[i].fw, err);
+		usb_put_dev(udev);
 	}
 
 	return err;

drivers/net/wireless/rtlwifi/wifi.h

@@ -2057,7 +2057,7 @@ struct rtl_priv {
 	   that it points to the data allocated
 	   beyond  this structure like:
 	   rtl_pci_priv or rtl_usb_priv */
-	u8 priv[0];
+	u8 priv[0] __aligned(sizeof(void *));
 };
 
 #define rtl_priv(hw)		(((struct rtl_priv *)(hw)->priv))

include/linux/bcma/bcma_driver_pci.h

@@ -242,6 +242,7 @@ extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
 				 struct bcma_device *core, bool enable);
 extern void bcma_core_pci_up(struct bcma_bus *bus);
 extern void bcma_core_pci_down(struct bcma_bus *bus);
+extern void bcma_core_pci_power_save(struct bcma_bus *bus, bool up);
 
 extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev);
 extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev);

include/net/bluetooth/hci.h

@@ -104,6 +104,7 @@ enum {
 enum {
 	HCI_SETUP,
 	HCI_AUTO_OFF,
+	HCI_RFKILLED,
 	HCI_MGMT,
 	HCI_PAIRABLE,
 	HCI_SERVICE_CACHE,

net/bluetooth/hci_core.c

@@ -1146,7 +1146,11 @@ int hci_dev_open(__u16 dev)
 		goto done;
 	}
 
-	if (hdev->rfkill && rfkill_blocked(hdev->rfkill)) {
+	/* Check for rfkill but allow the HCI setup stage to proceed
+	 * (which in itself doesn't cause any RF activity).
+	 */
+	if (test_bit(HCI_RFKILLED, &hdev->dev_flags) &&
+	    !test_bit(HCI_SETUP, &hdev->dev_flags)) {
 		ret = -ERFKILL;
 		goto done;
 	}
@@ -1566,10 +1570,13 @@ static int hci_rfkill_set_block(void *data, bool blocked)
 
 	BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked);
 
-	if (!blocked)
-		return 0;
-
+	if (blocked) {
+		set_bit(HCI_RFKILLED, &hdev->dev_flags);
+		if (!test_bit(HCI_SETUP, &hdev->dev_flags))
 			hci_dev_do_close(hdev);
+	} else {
+		clear_bit(HCI_RFKILLED, &hdev->dev_flags);
+	}
 
 	return 0;
 }
@@ -1591,9 +1598,13 @@ static void hci_power_on(struct work_struct *work)
 		return;
 	}
 
-	if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags))
+	if (test_bit(HCI_RFKILLED, &hdev->dev_flags)) {
+		clear_bit(HCI_AUTO_OFF, &hdev->dev_flags);
+		hci_dev_do_close(hdev);
+	} else if (test_bit(HCI_AUTO_OFF, &hdev->dev_flags)) {
 		queue_delayed_work(hdev->req_workqueue, &hdev->power_off,
 				   HCI_AUTO_OFF_TIMEOUT);
+	}
 
 	if (test_and_clear_bit(HCI_SETUP, &hdev->dev_flags))
 		mgmt_index_added(hdev);
@@ -2209,6 +2220,9 @@ int hci_register_dev(struct hci_dev *hdev)
 		}
 	}
 
+	if (hdev->rfkill && rfkill_blocked(hdev->rfkill))
+		set_bit(HCI_RFKILLED, &hdev->dev_flags);
+
 	set_bit(HCI_SETUP, &hdev->dev_flags);
 
 	if (hdev->dev_type != HCI_AMP)

net/bluetooth/hci_event.c

@@ -3557,7 +3557,11 @@ static void hci_le_ltk_request_evt(struct hci_dev *hdev, struct sk_buff *skb)
 	cp.handle = cpu_to_le16(conn->handle);
 
 	if (ltk->authenticated)
-		conn->sec_level = BT_SECURITY_HIGH;
+		conn->pending_sec_level = BT_SECURITY_HIGH;
+	else
+		conn->pending_sec_level = BT_SECURITY_MEDIUM;
+
+	conn->enc_key_size = ltk->enc_size;
 
 	hci_send_cmd(hdev, HCI_OP_LE_LTK_REPLY, sizeof(cp), &cp);
 

net/bluetooth/l2cap_core.c

@@ -3755,6 +3755,13 @@ static struct l2cap_chan *l2cap_connect(struct l2cap_conn *conn,
 
 	sk = chan->sk;
 
+	/* For certain devices (ex: HID mouse), support for authentication,
+	 * pairing and bonding is optional. For such devices, inorder to avoid
+	 * the ACL alive for too long after L2CAP disconnection, reset the ACL
+	 * disc_timeout back to HCI_DISCONN_TIMEOUT during L2CAP connect.
+	 */
+	conn->hcon->disc_timeout = HCI_DISCONN_TIMEOUT;
+
 	bacpy(&bt_sk(sk)->src, conn->src);
 	bacpy(&bt_sk(sk)->dst, conn->dst);
 	chan->psm  = psm;

net/bluetooth/rfcomm/tty.c

@@ -569,7 +569,6 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb)
 static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
 {
 	struct rfcomm_dev *dev = dlc->owner;
-	struct tty_struct *tty;
 	if (!dev)
 		return;
 
@@ -581,38 +580,8 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
 			    DPM_ORDER_DEV_AFTER_PARENT);
 
 		wake_up_interruptible(&dev->port.open_wait);
-	} else if (dlc->state == BT_CLOSED) {
-		tty = tty_port_tty_get(&dev->port);
-		if (!tty) {
-			if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
-				/* Drop DLC lock here to avoid deadlock
-				 * 1. rfcomm_dev_get will take rfcomm_dev_lock
-				 *    but in rfcomm_dev_add there's lock order:
-				 *    rfcomm_dev_lock -> dlc lock
-				 * 2. tty_port_put will deadlock if it's
-				 *    the last reference
-				 *
-				 * FIXME: when we release the lock anything
-				 * could happen to dev, even its destruction
-				 */
-				rfcomm_dlc_unlock(dlc);
-				if (rfcomm_dev_get(dev->id) == NULL) {
-					rfcomm_dlc_lock(dlc);
-					return;
-				}
-
-				if (!test_and_set_bit(RFCOMM_TTY_RELEASED,
-						      &dev->flags))
-					tty_port_put(&dev->port);
-
-				tty_port_put(&dev->port);
-				rfcomm_dlc_lock(dlc);
-			}
-		} else {
-			tty_hangup(tty);
-			tty_kref_put(tty);
-		}
-	}
+	} else if (dlc->state == BT_CLOSED)
+		tty_port_tty_hangup(&dev->port, false);
 }
 
 static void rfcomm_dev_modem_status(struct rfcomm_dlc *dlc, u8 v24_sig)