ARM: entry: get rid of multiple macro definitions

The following structure is just asking for trouble:

 #ifdef CONFIG_symbol
	.macro foo
	...
	.endm
	.macro bar
	...
	.endm
	.macro baz
	...
	.endm
 #else
	.macro foo
	...
	.endm
	.macro bar
	...
	.endm
 #ifdef CONFIG_symbol2
	.macro baz
	...
	.endm
 #else
	.macro baz
	...
	.endm
 #endif
 #endif

such as one defintion being updated, but the other definitions miss out.
Where the contents of a macro needs to be conditional, the hint is in
the first clause of this very sentence.  "contents" "conditional".  Not
multiple separate definitions, especially not when much of the macro
is the same between different configs.

This patch fixes this bad style, which had caused the Thumb2 code to
miss-out on the uaccess updates.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/entry-header.S

@@ -196,7 +196,7 @@
 	msr	cpsr_c, \rtemp			@ switch back to the SVC mode
 	.endm
 
-#ifndef CONFIG_THUMB2_KERNEL
+
 	.macro	svc_exit, rpsr, irq = 0
 	.if	\irq != 0
 	@ IRQs already off
@@ -215,6 +215,9 @@
 	blne	trace_hardirqs_off
 #endif
 	.endif
+
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode SVC restore
 	msr	spsr_cxsf, \rpsr
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_32v6K)
 	@ We must avoid clrex due to Cortex-A15 erratum #830321
@@ -222,6 +225,20 @@
 	strex	r1, r2, [r0]			@ clear the exclusive monitor
 #endif
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#else
+	@ Thumb mode SVC restore
+	ldr	lr, [sp, #S_SP]			@ top of the stack
+	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
+
+	@ We must avoid clrex due to Cortex-A15 erratum #830321
+	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
+
+	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
+	ldmia	sp, {r0 - r12}
+	mov	sp, lr
+	ldr	lr, [sp], #4
+	rfeia	sp!
+#endif
 	.endm
 
 	@
@@ -241,6 +258,8 @@
 	@ on the stack remains correct).
 	@
 	.macro  svc_exit_via_fiq
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode restore
 	mov	r0, sp
 	ldmib	r0, {r1 - r14}	@ abort is deadly from here onward (it will
 				@ clobber state restored below)
@@ -250,9 +269,26 @@
 	msr	spsr_cxsf, r9
 	ldr	r0, [r0, #S_R0]
 	ldmia	r8, {pc}^
+#else
+	@ Thumb mode restore
+	add	r0, sp, #S_R2
+	ldr	lr, [sp, #S_LR]
+	ldr	sp, [sp, #S_SP] @ abort is deadly from here onward (it will
+			        @ clobber state restored below)
+	ldmia	r0, {r2 - r12}
+	mov	r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
+	msr	cpsr_c, r1
+	sub	r0, #S_R2
+	add	r8, r0, #S_PC
+	ldmia	r0, {r0 - r1}
+	rfeia	r8
+#endif
 	.endm
 
+
 	.macro	restore_user_regs, fast = 0, offset = 0
+#ifndef CONFIG_THUMB2_KERNEL
+	@ ARM mode restore
 	mov	r2, sp
 	ldr	r1, [r2, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [r2, #\offset + S_PC]!	@ get pc
@@ -270,72 +306,16 @@
 						@ after ldm {}^
 	add	sp, sp, #\offset + S_FRAME_SIZE
 	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-
-#else	/* CONFIG_THUMB2_KERNEL */
-	.macro	svc_exit, rpsr, irq = 0
-	.if	\irq != 0
-	@ IRQs already off
-#ifdef CONFIG_TRACE_IRQFLAGS
-	@ The parent context IRQs must have been enabled to get here in
-	@ the first place, so there's no point checking the PSR I bit.
-	bl	trace_hardirqs_on
-#endif
-	.else
-	@ IRQs off again before pulling preserved data off the stack
-	disable_irq_notrace
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	\rpsr, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	\rpsr, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
-	.endif
-	ldr	lr, [sp, #S_SP]			@ top of the stack
-	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
-
-	@ We must avoid clrex due to Cortex-A15 erratum #830321
-	strex	r2, r1, [sp, #S_LR]		@ clear the exclusive monitor
-
-	stmdb	lr!, {r0, r1, \rpsr}		@ calling lr and rfe context
-	ldmia	sp, {r0 - r12}
-	mov	sp, lr
-	ldr	lr, [sp], #4
-	rfeia	sp!
-	.endm
-
-	@
-	@ svc_exit_via_fiq - like svc_exit but switches to FIQ mode before exit
-	@
-	@ For full details see non-Thumb implementation above.
-	@
-	.macro  svc_exit_via_fiq
-	add	r0, sp, #S_R2
-	ldr	lr, [sp, #S_LR]
-	ldr	sp, [sp, #S_SP] @ abort is deadly from here onward (it will
-			        @ clobber state restored below)
-	ldmia	r0, {r2 - r12}
-	mov	r1, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
-	msr	cpsr_c, r1
-	sub	r0, #S_R2
-	add	r8, r0, #S_PC
-	ldmia	r0, {r0 - r1}
-	rfeia	r8
-	.endm
-
-#ifdef CONFIG_CPU_V7M
-	/*
-	 * Note we don't need to do clrex here as clearing the local monitor is
-	 * part of each exception entry and exit sequence.
-	 */
-	.macro	restore_user_regs, fast = 0, offset = 0
+#elif defined(CONFIG_CPU_V7M)
+	@ V7M restore.
+	@ Note that we don't need to do clrex here as clearing the local
+	@ monitor is part of the exception entry and exit sequence.
 	.if	\offset
 	add	sp, #\offset
 	.endif
 	v7m_exception_slow_exit ret_r0 = \fast
-	.endm
-#else	/* ifdef CONFIG_CPU_V7M */
-	.macro	restore_user_regs, fast = 0, offset = 0
+#else
+	@ Thumb mode restore
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
@@ -353,9 +333,8 @@
 	.endif
 	add	sp, sp, #S_FRAME_SIZE - S_SP
 	movs	pc, lr				@ return & move spsr_svc into cpsr
-	.endm
-#endif	/* ifdef CONFIG_CPU_V7M / else */
 #endif	/* !CONFIG_THUMB2_KERNEL */
+	.endm
 
 /*
  * Context tracking subsystem.  Used to instrument transitions