staging: comedi: addi_eeprom: make the eeprom helper functions static

The functions used to read the eeprom header information blocks are
only used in this file. Move them to remove the need for the forward
declarations.

The i_EepromReadTimerHeader() function is currently not being used.
Block it out with and #if 0/#endif until it's determined if it should
be removed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi-data/addi_eeprom.c

@@ -110,26 +110,6 @@ struct str_AnalogInputHeader {
 int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, struct comedi_device *dev);
 
-int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_DigitalInputHeader *s_Header);
-
-int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_DigitalOutputHeader *s_Header);
-
-int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_TimerMainHeader *s_Header);
-
-int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_AnalogOutputHeader *s_Header);
-
-int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_AnalogInputHeader *s_Header);
-
 unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc_PCIChipInformation,
 	unsigned short w_EepromStartAddress);
 
@@ -315,6 +295,148 @@ unsigned short w_EepromReadWord(unsigned short w_PCIBoardEepromAddress, char *pc
 	return w_ReadWord;
 }
 
+static int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
+					  char *pc_PCIChipInformation,
+					  unsigned short w_Address,
+					  struct str_DigitalInputHeader *s_Header)
+{
+	unsigned short w_Temp;
+
+	/*  read nbr of channels */
+	s_Header->w_Nchannel =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 6);
+
+	/*  interruptible or not */
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + 8);
+	s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
+
+/* How many interruptible logic */
+	s_Header->w_NinterruptLogic =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 10);
+
+	return 0;
+}
+
+static int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
+					   char *pc_PCIChipInformation,
+					   unsigned short w_Address,
+					   struct str_DigitalOutputHeader *s_Header)
+{
+/* Read Nbr channels */
+	s_Header->w_Nchannel =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 6);
+	return 0;
+}
+
+#if 0
+static int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
+				   char *pc_PCIChipInformation,
+				   unsigned short w_Address,
+				   struct str_TimerMainHeader *s_Header)
+{
+
+	unsigned short i, w_Size = 0, w_Temp;
+
+/* Read No of Timer */
+	s_Header->w_Ntimer =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 6);
+/* Read header size */
+
+	for (i = 0; i < s_Header->w_Ntimer; i++) {
+		s_Header->s_TimerDetails[i].w_HeaderSize =
+			w_EepromReadWord(w_PCIBoardEepromAddress,
+			pc_PCIChipInformation,
+			0x100 + w_Address + 8 + w_Size + 0);
+		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+			pc_PCIChipInformation,
+			0x100 + w_Address + 8 + w_Size + 2);
+
+		/* Read Resolution */
+		s_Header->s_TimerDetails[i].b_Resolution =
+			(unsigned char) (w_Temp >> 10) & 0x3F;
+
+		/* Read Mode */
+		s_Header->s_TimerDetails[i].b_Mode =
+			(unsigned char) (w_Temp >> 4) & 0x3F;
+
+		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+			pc_PCIChipInformation,
+			0x100 + w_Address + 8 + w_Size + 4);
+
+		/* Read MinTiming */
+		s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
+
+		/* Read Timebase */
+		s_Header->s_TimerDetails[i].b_TimeBase = (unsigned char) (w_Temp) & 0x3F;
+		w_Size += s_Header->s_TimerDetails[i].w_HeaderSize;
+	}
+
+	return 0;
+}
+#endif
+
+static int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
+					 char *pc_PCIChipInformation,
+					 unsigned short w_Address,
+					 struct str_AnalogOutputHeader *s_Header)
+{
+	unsigned short w_Temp;
+	/*  No of channels for 1st hard component */
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + 10);
+	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
+	/*  Resolution for 1st hard component */
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + 16);
+	s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
+	return 0;
+}
+
+/* Reads only for ONE  hardware component */
+static int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
+					char *pc_PCIChipInformation,
+					unsigned short w_Address,
+					struct str_AnalogInputHeader *s_Header)
+{
+	unsigned short w_Temp, w_Offset;
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + 10);
+	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
+	s_Header->w_MinConvertTiming =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 16);
+	s_Header->w_MinDelayTiming =
+		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
+		0x100 + w_Address + 30);
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + 20);
+	s_Header->b_HasDma = (w_Temp >> 13) & 0x01;	/*  whether dma present or not */
+
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72);	/*  reading Y */
+	w_Temp = w_Temp & 0x00FF;
+	if (w_Temp)		/* Y>0 */
+	{
+		w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16)));	/*  offset of first analog input single header */
+		w_Offset = w_Offset + 2;	/*  resolution */
+	} else			/* Y=0 */
+	{
+		w_Offset = 74;
+		w_Offset = w_Offset + 2;	/*  resolution */
+	}
+
+/* read Resolution */
+	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
+		pc_PCIChipInformation, 0x100 + w_Address + w_Offset);
+	s_Header->b_Resolution = w_Temp & 0x001F;	/*  last 5 bits */
+
+	return 0;
+}
+
 int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 	char *pc_PCIChipInformation, struct comedi_device *dev)
 {
@@ -436,138 +558,3 @@ int i_EepromReadMainHeader(unsigned short w_PCIBoardEepromAddress,
 
 	return 0;
 }
-
-int i_EepromReadDigitalInputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_DigitalInputHeader *s_Header)
-{
-	unsigned short w_Temp;
-
-	/*  read nbr of channels */
-	s_Header->w_Nchannel =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 6);
-
-	/*  interruptible or not */
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + 8);
-	s_Header->b_Interruptible = (unsigned char) (w_Temp >> 7) & 0x01;
-
-/* How many interruptible logic */
-	s_Header->w_NinterruptLogic =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 10);
-
-	return 0;
-}
-
-int i_EepromReadDigitalOutputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_DigitalOutputHeader *s_Header)
-{
-/* Read Nbr channels */
-	s_Header->w_Nchannel =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 6);
-	return 0;
-}
-
-int i_EepromReadTimerHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_TimerMainHeader *s_Header)
-{
-
-	unsigned short i, w_Size = 0, w_Temp;
-
-/* Read No of Timer */
-	s_Header->w_Ntimer =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 6);
-/* Read header size */
-
-	for (i = 0; i < s_Header->w_Ntimer; i++) {
-		s_Header->s_TimerDetails[i].w_HeaderSize =
-			w_EepromReadWord(w_PCIBoardEepromAddress,
-			pc_PCIChipInformation,
-			0x100 + w_Address + 8 + w_Size + 0);
-		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-			pc_PCIChipInformation,
-			0x100 + w_Address + 8 + w_Size + 2);
-
-		/* Read Resolution */
-		s_Header->s_TimerDetails[i].b_Resolution =
-			(unsigned char) (w_Temp >> 10) & 0x3F;
-
-		/* Read Mode */
-		s_Header->s_TimerDetails[i].b_Mode =
-			(unsigned char) (w_Temp >> 4) & 0x3F;
-
-		w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-			pc_PCIChipInformation,
-			0x100 + w_Address + 8 + w_Size + 4);
-
-		/* Read MinTiming */
-		s_Header->s_TimerDetails[i].w_MinTiming = (w_Temp >> 6) & 0x3FF;
-
-		/* Read Timebase */
-		s_Header->s_TimerDetails[i].b_TimeBase = (unsigned char) (w_Temp) & 0x3F;
-		w_Size += s_Header->s_TimerDetails[i].w_HeaderSize;
-	}
-
-	return 0;
-}
-
-int i_EepromReadAnlogOutputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_AnalogOutputHeader *s_Header)
-{
-	unsigned short w_Temp;
-	/*  No of channels for 1st hard component */
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + 10);
-	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
-	/*  Resolution for 1st hard component */
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + 16);
-	s_Header->b_Resolution = (unsigned char) (w_Temp >> 8) & 0xFF;
-	return 0;
-}
-
-/* Reads only for ONE  hardware component */
-int i_EepromReadAnlogInputHeader(unsigned short w_PCIBoardEepromAddress,
-	char *pc_PCIChipInformation, unsigned short w_Address,
-	struct str_AnalogInputHeader *s_Header)
-{
-	unsigned short w_Temp, w_Offset;
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + 10);
-	s_Header->w_Nchannel = (w_Temp >> 4) & 0x03FF;
-	s_Header->w_MinConvertTiming =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 16);
-	s_Header->w_MinDelayTiming =
-		w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation,
-		0x100 + w_Address + 30);
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + 20);
-	s_Header->b_HasDma = (w_Temp >> 13) & 0x01;	/*  whether dma present or not */
-
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress, pc_PCIChipInformation, 0x100 + w_Address + 72);	/*  reading Y */
-	w_Temp = w_Temp & 0x00FF;
-	if (w_Temp)		/* Y>0 */
-	{
-		w_Offset = 74 + (2 * w_Temp) + (10 * (1 + (w_Temp / 16)));	/*  offset of first analog input single header */
-		w_Offset = w_Offset + 2;	/*  resolution */
-	} else			/* Y=0 */
-	{
-		w_Offset = 74;
-		w_Offset = w_Offset + 2;	/*  resolution */
-	}
-
-/* read Resolution */
-	w_Temp = w_EepromReadWord(w_PCIBoardEepromAddress,
-		pc_PCIChipInformation, 0x100 + w_Address + w_Offset);
-	s_Header->b_Resolution = w_Temp & 0x001F;	/*  last 5 bits */
-
-	return 0;
-}