Commit aa9d4081 authored by Sam Ravnborg's avatar Sam Ravnborg

drm/drm_connector: drop legacy drm_bus_flags values

Drop the now unused legacy drm_bus_flags values.
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
Reviewed-by: default avatarLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200630180545.1132217-7-sam@ravnborg.org
parent f5436f77
...@@ -323,8 +323,6 @@ struct drm_monitor_range_info { ...@@ -323,8 +323,6 @@ struct drm_monitor_range_info {
* *
* @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low * @DRM_BUS_FLAG_DE_LOW: The Data Enable signal is active low
* @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high * @DRM_BUS_FLAG_DE_HIGH: The Data Enable signal is active high
* @DRM_BUS_FLAG_PIXDATA_POSEDGE: Legacy value, do not use
* @DRM_BUS_FLAG_PIXDATA_NEGEDGE: Legacy value, do not use
* @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of * @DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE: Data is driven on the rising edge of
* the pixel clock * the pixel clock
* @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of * @DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE: Data is driven on the falling edge of
...@@ -335,8 +333,6 @@ struct drm_monitor_range_info { ...@@ -335,8 +333,6 @@ struct drm_monitor_range_info {
* the pixel clock * the pixel clock
* @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus * @DRM_BUS_FLAG_DATA_MSB_TO_LSB: Data is transmitted MSB to LSB on the bus
* @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus * @DRM_BUS_FLAG_DATA_LSB_TO_MSB: Data is transmitted LSB to MSB on the bus
* @DRM_BUS_FLAG_SYNC_POSEDGE: Legacy value, do not use
* @DRM_BUS_FLAG_SYNC_NEGEDGE: Legacy value, do not use
* @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising * @DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE: Sync signals are driven on the rising
* edge of the pixel clock * edge of the pixel clock
* @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling * @DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE: Sync signals are driven on the falling
...@@ -351,20 +347,16 @@ struct drm_monitor_range_info { ...@@ -351,20 +347,16 @@ struct drm_monitor_range_info {
enum drm_bus_flags { enum drm_bus_flags {
DRM_BUS_FLAG_DE_LOW = BIT(0), DRM_BUS_FLAG_DE_LOW = BIT(0),
DRM_BUS_FLAG_DE_HIGH = BIT(1), DRM_BUS_FLAG_DE_HIGH = BIT(1),
DRM_BUS_FLAG_PIXDATA_POSEDGE = BIT(2), DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = BIT(2),
DRM_BUS_FLAG_PIXDATA_NEGEDGE = BIT(3), DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = BIT(3),
DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE, DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE, DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE = DRM_BUS_FLAG_PIXDATA_NEGEDGE,
DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE = DRM_BUS_FLAG_PIXDATA_POSEDGE,
DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4), DRM_BUS_FLAG_DATA_MSB_TO_LSB = BIT(4),
DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5), DRM_BUS_FLAG_DATA_LSB_TO_MSB = BIT(5),
DRM_BUS_FLAG_SYNC_POSEDGE = BIT(6), DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = BIT(6),
DRM_BUS_FLAG_SYNC_NEGEDGE = BIT(7), DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = BIT(7),
DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE = DRM_BUS_FLAG_SYNC_POSEDGE, DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE,
DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE, DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE,
DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE = DRM_BUS_FLAG_SYNC_NEGEDGE,
DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE = DRM_BUS_FLAG_SYNC_POSEDGE,
DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8), DRM_BUS_FLAG_SHARP_SIGNALS = BIT(8),
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment