Commit ab123fe0 authored by Govindarajulu Varadarajan's avatar Govindarajulu Varadarajan Committed by David S. Miller

enic: handle mtu change for vf properly

When driver gets notification for mtu change, driver does not handle it for
all RQs. It handles only RQ[0].

Fix is to use enic_change_mtu() interface to change mtu for vf.
Signed-off-by: default avatarGovindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 136f55f6
...@@ -2047,28 +2047,42 @@ static int enic_stop(struct net_device *netdev) ...@@ -2047,28 +2047,42 @@ static int enic_stop(struct net_device *netdev)
return 0; return 0;
} }
static int _enic_change_mtu(struct net_device *netdev, int new_mtu)
{
bool running = netif_running(netdev);
int err = 0;
ASSERT_RTNL();
if (running) {
err = enic_stop(netdev);
if (err)
return err;
}
netdev->mtu = new_mtu;
if (running) {
err = enic_open(netdev);
if (err)
return err;
}
return 0;
}
static int enic_change_mtu(struct net_device *netdev, int new_mtu) static int enic_change_mtu(struct net_device *netdev, int new_mtu)
{ {
struct enic *enic = netdev_priv(netdev); struct enic *enic = netdev_priv(netdev);
int running = netif_running(netdev);
if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic)) if (enic_is_dynamic(enic) || enic_is_sriov_vf(enic))
return -EOPNOTSUPP; return -EOPNOTSUPP;
if (running)
enic_stop(netdev);
netdev->mtu = new_mtu;
if (netdev->mtu > enic->port_mtu) if (netdev->mtu > enic->port_mtu)
netdev_warn(netdev, netdev_warn(netdev,
"interface MTU (%d) set higher than port MTU (%d)\n", "interface MTU (%d) set higher than port MTU (%d)\n",
netdev->mtu, enic->port_mtu); netdev->mtu, enic->port_mtu);
if (running) return _enic_change_mtu(netdev, new_mtu);
enic_open(netdev);
return 0;
} }
static void enic_change_mtu_work(struct work_struct *work) static void enic_change_mtu_work(struct work_struct *work)
...@@ -2076,47 +2090,9 @@ static void enic_change_mtu_work(struct work_struct *work) ...@@ -2076,47 +2090,9 @@ static void enic_change_mtu_work(struct work_struct *work)
struct enic *enic = container_of(work, struct enic, change_mtu_work); struct enic *enic = container_of(work, struct enic, change_mtu_work);
struct net_device *netdev = enic->netdev; struct net_device *netdev = enic->netdev;
int new_mtu = vnic_dev_mtu(enic->vdev); int new_mtu = vnic_dev_mtu(enic->vdev);
int err;
unsigned int i;
new_mtu = max_t(int, ENIC_MIN_MTU, min_t(int, ENIC_MAX_MTU, new_mtu));
rtnl_lock(); rtnl_lock();
(void)_enic_change_mtu(netdev, new_mtu);
/* Stop RQ */
del_timer_sync(&enic->notify_timer);
for (i = 0; i < enic->rq_count; i++)
napi_disable(&enic->napi[i]);
vnic_intr_mask(&enic->intr[0]);
enic_synchronize_irqs(enic);
err = vnic_rq_disable(&enic->rq[0]);
if (err) {
rtnl_unlock();
netdev_err(netdev, "Unable to disable RQ.\n");
return;
}
vnic_rq_clean(&enic->rq[0], enic_free_rq_buf);
vnic_cq_clean(&enic->cq[0]);
vnic_intr_clean(&enic->intr[0]);
/* Fill RQ with new_mtu-sized buffers */
netdev->mtu = new_mtu;
vnic_rq_fill(&enic->rq[0], enic_rq_alloc_buf);
/* Need at least one buffer on ring to get going */
if (vnic_rq_desc_used(&enic->rq[0]) == 0) {
rtnl_unlock();
netdev_err(netdev, "Unable to alloc receive buffers.\n");
return;
}
/* Start RQ */
vnic_rq_enable(&enic->rq[0]);
napi_enable(&enic->napi[0]);
vnic_intr_unmask(&enic->intr[0]);
enic_notify_timer_start(enic);
rtnl_unlock(); rtnl_unlock();
netdev_info(netdev, "interface MTU set as %d\n", netdev->mtu); netdev_info(netdev, "interface MTU set as %d\n", netdev->mtu);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment