Merge tag 'fixes-for-v5.9-rc2' of...

Merge tag 'fixes-for-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.9-rc

Three ZLP fixes on dwc3 and a resource leak fix on the TCM gadget
Signed-off-by: Felipe Balbi <balbi@kernel.org>

* tag 'fixes-for-v5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: dwc3: gadget: Handle ZLP for sg requests
  usb: dwc3: gadget: Fix handling ZLP
  usb: dwc3: gadget: Don't setup more than requested
  usb: gadget: f_tcm: Fix some resource leaks in some error paths

drivers/usb/dwc3/gadget.c

@@ -1054,27 +1054,25 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
  * dwc3_prepare_one_trb - setup one TRB from one request
  * @dep: endpoint for which this request is prepared
  * @req: dwc3_request pointer
+ * @trb_length: buffer size of the TRB
  * @chain: should this TRB be chained to the next?
  * @node: only for isochronous endpoints. First TRB needs different type.
  */
 static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
-		struct dwc3_request *req, unsigned chain, unsigned node)
+		struct dwc3_request *req, unsigned int trb_length,
+		unsigned chain, unsigned node)
 {
 	struct dwc3_trb		*trb;
-	unsigned int		length;
 	dma_addr_t		dma;
 	unsigned		stream_id = req->request.stream_id;
 	unsigned		short_not_ok = req->request.short_not_ok;
 	unsigned		no_interrupt = req->request.no_interrupt;
 	unsigned		is_last = req->request.is_last;
 
-	if (req->request.num_sgs > 0) {
-		length = sg_dma_len(req->start_sg);
+	if (req->request.num_sgs > 0)
 		dma = sg_dma_address(req->start_sg);
-	} else {
-		length = req->request.length;
+	else
 		dma = req->request.dma;
-	}
 
 	trb = &dep->trb_pool[dep->trb_enqueue];
 
@@ -1086,7 +1084,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 
 	req->num_trbs++;
 
-	__dwc3_prepare_one_trb(dep, trb, dma, length, chain, node,
+	__dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node,
 			stream_id, short_not_ok, no_interrupt, is_last);
 }
 
@@ -1096,16 +1094,27 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 	struct scatterlist *sg = req->start_sg;
 	struct scatterlist *s;
 	int		i;
-
+	unsigned int length = req->request.length;
 	unsigned int remaining = req->request.num_mapped_sgs
 		- req->num_queued_sgs;
 
+	/*
+	 * If we resume preparing the request, then get the remaining length of
+	 * the request and resume where we left off.
+	 */
+	for_each_sg(req->request.sg, s, req->num_queued_sgs, i)
+		length -= sg_dma_len(s);
+
 	for_each_sg(sg, s, remaining, i) {
-		unsigned int length = req->request.length;
 		unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
 		unsigned int rem = length % maxp;
+		unsigned int trb_length;
 		unsigned chain = true;
 
+		trb_length = min_t(unsigned int, length, sg_dma_len(s));
+
+		length -= trb_length;
+
 		/*
 		 * IOMMU driver is coalescing the list of sgs which shares a
 		 * page boundary into one and giving it to USB driver. With
@@ -1113,7 +1122,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 		 * sgs passed. So mark the chain bit to false if it isthe last
 		 * mapped sg.
 		 */
-		if (i == remaining - 1)
+		if ((i == remaining - 1) || !length)
 			chain = false;
 
 		if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
@@ -1123,7 +1132,7 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 			req->needs_extra_trb = true;
 
 			/* prepare normal TRB */
-			dwc3_prepare_one_trb(dep, req, true, i);
+			dwc3_prepare_one_trb(dep, req, trb_length, true, i);
 
 			/* Now prepare one extra TRB to align transfer size */
 			trb = &dep->trb_pool[dep->trb_enqueue];
@@ -1134,8 +1143,39 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 					req->request.short_not_ok,
 					req->request.no_interrupt,
 					req->request.is_last);
+		} else if (req->request.zero && req->request.length &&
+			   !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+			   !rem && !chain) {
+			struct dwc3	*dwc = dep->dwc;
+			struct dwc3_trb	*trb;
+
+			req->needs_extra_trb = true;
+
+			/* Prepare normal TRB */
+			dwc3_prepare_one_trb(dep, req, trb_length, true, i);
+
+			/* Prepare one extra TRB to handle ZLP */
+			trb = &dep->trb_pool[dep->trb_enqueue];
+			req->num_trbs++;
+			__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
+					       !req->direction, 1,
+					       req->request.stream_id,
+					       req->request.short_not_ok,
+					       req->request.no_interrupt,
+					       req->request.is_last);
+
+			/* Prepare one more TRB to handle MPS alignment */
+			if (!req->direction) {
+				trb = &dep->trb_pool[dep->trb_enqueue];
+				req->num_trbs++;
+				__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
+						       false, 1, req->request.stream_id,
+						       req->request.short_not_ok,
+						       req->request.no_interrupt,
+						       req->request.is_last);
+			}
 		} else {
-			dwc3_prepare_one_trb(dep, req, chain, i);
+			dwc3_prepare_one_trb(dep, req, trb_length, chain, i);
 		}
 
 		/*
@@ -1150,6 +1190,16 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 
 		req->num_queued_sgs++;
 
+		/*
+		 * The number of pending SG entries may not correspond to the
+		 * number of mapped SG entries. If all the data are queued, then
+		 * don't include unused SG entries.
+		 */
+		if (length == 0) {
+			req->num_pending_sgs -= req->request.num_mapped_sgs - req->num_queued_sgs;
+			break;
+		}
+
 		if (!dwc3_calc_trbs_left(dep))
 			break;
 	}
@@ -1169,7 +1219,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		req->needs_extra_trb = true;
 
 		/* prepare normal TRB */
-		dwc3_prepare_one_trb(dep, req, true, 0);
+		dwc3_prepare_one_trb(dep, req, length, true, 0);
 
 		/* Now prepare one extra TRB to align transfer size */
 		trb = &dep->trb_pool[dep->trb_enqueue];
@@ -1180,6 +1230,7 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 				req->request.no_interrupt,
 				req->request.is_last);
 	} else if (req->request.zero && req->request.length &&
+		   !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
 		   (IS_ALIGNED(req->request.length, maxp))) {
 		struct dwc3	*dwc = dep->dwc;
 		struct dwc3_trb	*trb;
@@ -1187,18 +1238,29 @@ static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
 		req->needs_extra_trb = true;
 
 		/* prepare normal TRB */
-		dwc3_prepare_one_trb(dep, req, true, 0);
+		dwc3_prepare_one_trb(dep, req, length, true, 0);
 
-		/* Now prepare one extra TRB to handle ZLP */
+		/* Prepare one extra TRB to handle ZLP */
 		trb = &dep->trb_pool[dep->trb_enqueue];
 		req->num_trbs++;
 		__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, 0,
+				!req->direction, 1, req->request.stream_id,
+				req->request.short_not_ok,
+				req->request.no_interrupt,
+				req->request.is_last);
+
+		/* Prepare one more TRB to handle MPS alignment for OUT */
+		if (!req->direction) {
+			trb = &dep->trb_pool[dep->trb_enqueue];
+			req->num_trbs++;
+			__dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp,
 					       false, 1, req->request.stream_id,
 					       req->request.short_not_ok,
 					       req->request.no_interrupt,
 					       req->request.is_last);
+		}
 	} else {
-		dwc3_prepare_one_trb(dep, req, false, 0);
+		dwc3_prepare_one_trb(dep, req, length, false, 0);
 	}
 }
 
@@ -2671,8 +2733,17 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 				status);
 
 	if (req->needs_extra_trb) {
+		unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
+
 		ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event,
 				status);
+
+		/* Reclaim MPS padding TRB for ZLP */
+		if (!req->direction && req->request.zero && req->request.length &&
+		    !usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
+		    (IS_ALIGNED(req->request.length, maxp)))
+			ret = dwc3_gadget_ep_reclaim_trb_linear(dep, req, event, status);
+
 		req->needs_extra_trb = false;
 	}
 

drivers/usb/gadget/function/f_tcm.c

@@ -753,12 +753,13 @@ static int uasp_alloc_stream_res(struct f_uas *fu, struct uas_stream *stream)
 		goto err_sts;
 
 	return 0;
+
 err_sts:
-	usb_ep_free_request(fu->ep_status, stream->req_status);
-	stream->req_status = NULL;
-err_out:
 	usb_ep_free_request(fu->ep_out, stream->req_out);
 	stream->req_out = NULL;
+err_out:
+	usb_ep_free_request(fu->ep_in, stream->req_in);
+	stream->req_in = NULL;
 out:
 	return -ENOMEM;
 }