Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull core timer updates from Ingo Molnar:
 "The main changes in this cycle's merge are:

   - Implement shadow timekeeper to shorten in kernel reader side
     blocking, by Thomas Gleixner.

   - Posix timers enhancements by Pavel Emelyanov:

   - allocate timer ID per process, so that exact timer ID allocations
     can be re-created be checkpoint/restore code.

   - debuggability and tooling (/proc/PID/timers, etc.) improvements.

   - suspend/resume enhancements by Feng Tang: on certain new Intel Atom
     processors (Penwell and Cloverview), there is a feature that the
     TSC won't stop in S3 state, so the TSC value won't be reset to 0
     after resume.  This can be taken advantage of by the generic via
     the CLOCK_SOURCE_SUSPEND_NONSTOP flag: instead of using the RTC to
     recover/approximate sleep time, the main (and precise) clocksource
     can be used.

   - Fix /proc/timer_list for 4096 CPUs by Nathan Zimmer: on so many
     CPUs the file goes beyond 4MB of size and thus the current
     simplistic seqfile approach fails.  Convert /proc/timer_list to a
     proper seq_file with its own iterator.

   - Cleanups and refactorings of the core timekeeping code by John
     Stultz.

   - International Atomic Clock time is managed by the NTP code
     internally currently but not exposed externally.  Separate the TAI
     code out and add CLOCK_TAI support and TAI support to the hrtimer
     and posix-timer code, by John Stultz.

   - Add deep idle support enhacement to the broadcast clockevents core
     timer code, by Daniel Lezcano: add an opt-in CLOCK_EVT_FEAT_DYNIRQ
     clockevents feature (which will be utilized by future clockevents
     driver updates), which allows the use of IRQ affinities to avoid
     spurious wakeups of idle CPUs - the right CPU with an expiring
     timer will be woken.

   - Add new ARM bcm281xx clocksource driver, by Christian Daudt

   - ... various other fixes and cleanups"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  clockevents: Set dummy handler on CPU_DEAD shutdown
  timekeeping: Update tk->cycle_last in resume
  posix-timers: Remove unused variable
  clockevents: Switch into oneshot mode even if broadcast registered late
  timer_list: Convert timer list to be a proper seq_file
  timer_list: Split timer_list_show_tickdevices
  posix-timers: Show sigevent info in proc file
  posix-timers: Introduce /proc/PID/timers file
  posix timers: Allocate timer id per process (v2)
  timekeeping: Make sure to notify hrtimers when TAI offset changes
  hrtimer: Fix ktime_add_ns() overflow on 32bit architectures
  hrtimer: Add expiry time overflow check in hrtimer_interrupt
  timekeeping: Shorten seq_count region
  timekeeping: Implement a shadow timekeeper
  timekeeping: Delay update of clock->cycle_last
  timekeeping: Store cycle_last value in timekeeper struct as well
  ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state
  timekeeping: Simplify tai updating from do_adjtimex
  timekeeping: Hold timekeepering locks in do_adjtimex and hardpps
  timekeeping: Move ADJ_SETOFFSET to top level do_adjtimex()
  ...

arch/arm/mach-bcm/Kconfig

@@ -6,6 +6,7 @@ config ARCH_BCM
 	select ARM_ERRATA_764369 if SMP
 	select ARM_GIC
 	select CPU_V7
+	select CLKSRC_OF
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_TIME
 	select GPIO_BCM

arch/arm/mach-bcm/board_bcm.c

@@ -16,14 +16,11 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irqchip.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-static void timer_init(void)
-{
-}
-
 
 static void __init board_init(void)
 {
@@ -35,7 +32,7 @@ static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
 
 DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
 	.init_irq = irqchip_init,
-	.init_time = timer_init,
+	.init_time = clocksource_of_init,
 	.init_machine = board_init,
 	.dt_compat = bcm11351_dt_compat,
 MACHINE_END

arch/x86/Kconfig

@@ -120,6 +120,7 @@ config X86
 	select OLD_SIGSUSPEND3 if X86_32 || IA32_EMULATION
 	select OLD_SIGACTION if X86_32
 	select COMPAT_OLD_SIGACTION if IA32_EMULATION
+	select RTC_LIB
 
 config INSTRUCTION_DECODER
 	def_bool y

arch/x86/include/asm/cpufeature.h

@@ -100,6 +100,7 @@
 #define X86_FEATURE_AMD_DCM     (3*32+27) /* multi-node processor */
 #define X86_FEATURE_APERFMPERF	(3*32+28) /* APERFMPERF */
 #define X86_FEATURE_EAGER_FPU	(3*32+29) /* "eagerfpu" Non lazy FPU restore */
+#define X86_FEATURE_NONSTOP_TSC_S3 (3*32+30) /* TSC doesn't stop in S3 state */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */

arch/x86/kernel/cpu/intel.c

@@ -96,6 +96,18 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 			sched_clock_stable = 1;
 	}
 
+	/* Penwell and Cloverview have the TSC which doesn't sleep on S3 */
+	if (c->x86 == 6) {
+		switch (c->x86_model) {
+		case 0x27:	/* Penwell */
+		case 0x35:	/* Cloverview */
+			set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3);
+			break;
+		default:
+			break;
+		}
+	}
+
 	/*
 	 * There is a known erratum on Pentium III and Core Solo
 	 * and Core Duo CPUs.

arch/x86/kernel/rtc.c

@@ -13,6 +13,7 @@
 #include <asm/x86_init.h>
 #include <asm/time.h>
 #include <asm/mrst.h>
+#include <asm/rtc.h>
 
 #ifdef CONFIG_X86_32
 /*
@@ -36,70 +37,24 @@ EXPORT_SYMBOL(rtc_lock);
  * nowtime is written into the registers of the CMOS clock, it will
  * jump to the next second precisely 500 ms later. Check the Motorola
  * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
  */
 int mach_set_rtc_mmss(unsigned long nowtime)
 {
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-	unsigned long flags;
+	struct rtc_time tm;
 	int retval = 0;
 
-	spin_lock_irqsave(&rtc_lock, flags);
-
-	 /* tell the clock it's being set */
-	save_control = CMOS_READ(RTC_CONTROL);
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	/* stop and reset prescaler */
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	/* correct for half hour time zone */
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds, RTC_SECONDS);
-		CMOS_WRITE(real_minutes, RTC_MINUTES);
+	rtc_time_to_tm(nowtime, &tm);
+	if (!rtc_valid_tm(&tm)) {
+		retval = set_rtc_time(&tm);
+		if (retval)
+			printk(KERN_ERR "%s: RTC write failed with error %d\n",
+			       __FUNCTION__, retval);
 	} else {
-		printk_once(KERN_NOTICE
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
+		printk(KERN_ERR
+		       "%s: Invalid RTC value: write of %lx to RTC failed\n",
+			__FUNCTION__, nowtime);
+		retval = -EINVAL;
 	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
 	return retval;
 }
 

arch/x86/kernel/tsc.c

@@ -768,6 +768,7 @@ static cycle_t read_tsc(struct clocksource *cs)
 
 static void resume_tsc(struct clocksource *cs)
 {
+	if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
 		clocksource_tsc.cycle_last = 0;
 }
 
@@ -939,6 +940,9 @@ static int __init init_tsc_clocksource(void)
 		clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
 	}
 
+	if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC_S3))
+		clocksource_tsc.flags |= CLOCK_SOURCE_SUSPEND_NONSTOP;
+
 	/*
 	 * Trust the results of the earlier calibration on systems
 	 * exporting a reliable TSC.

arch/x86/platform/efi/efi.c

@@ -49,6 +49,7 @@
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
 #include <asm/x86_init.h>
+#include <asm/rtc.h>
 
 #define EFI_DEBUG	1
 
@@ -352,10 +353,10 @@ static efi_status_t __init phys_efi_get_time(efi_time_t *tm,
 
 int efi_set_rtc_mmss(unsigned long nowtime)
 {
-	int real_seconds, real_minutes;
 	efi_status_t 	status;
 	efi_time_t 	eft;
 	efi_time_cap_t 	cap;
+	struct rtc_time	tm;
 
 	status = efi.get_time(&eft, &cap);
 	if (status != EFI_SUCCESS) {
@@ -363,13 +364,20 @@ int efi_set_rtc_mmss(unsigned long nowtime)
 		return -1;
 	}
 
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - eft.minute) + 15)/30) & 1)
-		real_minutes += 30;
-	real_minutes %= 60;
-	eft.minute = real_minutes;
-	eft.second = real_seconds;
+	rtc_time_to_tm(nowtime, &tm);
+	if (!rtc_valid_tm(&tm)) {
+		eft.year = tm.tm_year + 1900;
+		eft.month = tm.tm_mon + 1;
+		eft.day = tm.tm_mday;
+		eft.minute = tm.tm_min;
+		eft.second = tm.tm_sec;
+		eft.nanosecond = 0;
+	} else {
+		printk(KERN_ERR
+		       "%s: Invalid EFI RTC value: write of %lx to EFI RTC failed\n",
+		       __FUNCTION__, nowtime);
+		return -1;
+	}
 
 	status = efi.set_time(&eft);
 	if (status != EFI_SUCCESS) {

arch/x86/platform/mrst/vrtc.c

@@ -85,27 +85,35 @@ unsigned long vrtc_get_time(void)
 	return mktime(year, mon, mday, hour, min, sec);
 }
 
-/* Only care about the minutes and seconds */
 int vrtc_set_mmss(unsigned long nowtime)
 {
-	int real_sec, real_min;
 	unsigned long flags;
-	int vrtc_min;
-
+	struct rtc_time tm;
+	int year;
+	int retval = 0;
+
+	rtc_time_to_tm(nowtime, &tm);
+	if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) {
+		/*
+		 * tm.year is the number of years since 1900, and the
+		 * vrtc need the years since 1972.
+		 */
+		year = tm.tm_year - 72;
 		spin_lock_irqsave(&rtc_lock, flags);
-	vrtc_min = vrtc_cmos_read(RTC_MINUTES);
-
-	real_sec = nowtime % 60;
-	real_min = nowtime / 60;
-	if (((abs(real_min - vrtc_min) + 15)/30) & 1)
-		real_min += 30;
-	real_min %= 60;
-
-	vrtc_cmos_write(real_sec, RTC_SECONDS);
-	vrtc_cmos_write(real_min, RTC_MINUTES);
+		vrtc_cmos_write(year, RTC_YEAR);
+		vrtc_cmos_write(tm.tm_mon, RTC_MONTH);
+		vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH);
+		vrtc_cmos_write(tm.tm_hour, RTC_HOURS);
+		vrtc_cmos_write(tm.tm_min, RTC_MINUTES);
+		vrtc_cmos_write(tm.tm_sec, RTC_SECONDS);
 		spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return 0;
+	} else {
+		printk(KERN_ERR
+		       "%s: Invalid vRTC value: write of %lx to vRTC failed\n",
+			__FUNCTION__, nowtime);
+		retval = -EINVAL;
+	}
+	return retval;
 }
 
 void __init mrst_rtc_init(void)

drivers/clocksource/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_ARCH_BCM2835)	+= bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)	+= sunxi_timer.o
 obj-$(CONFIG_ARCH_TEGRA)	+= tegra20_timer.o
 obj-$(CONFIG_VT8500_TIMER)	+= vt8500_timer.o
+obj-$(CONFIG_ARCH_BCM)		+= bcm_kona_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o

drivers/clocksource/bcm_kona_timer.c

+/*
+ * Copyright (C) 2012 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/types.h>
+
+#include <linux/io.h>
+#include <asm/mach/time.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+
+#define KONA_GPTIMER_STCS_OFFSET			0x00000000
+#define KONA_GPTIMER_STCLO_OFFSET			0x00000004
+#define KONA_GPTIMER_STCHI_OFFSET			0x00000008
+#define KONA_GPTIMER_STCM0_OFFSET			0x0000000C
+
+#define KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT		0
+#define KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT		4
+
+struct kona_bcm_timers {
+	int tmr_irq;
+	void __iomem *tmr_regs;
+};
+
+static struct kona_bcm_timers timers;
+
+static u32 arch_timer_rate;
+
+/*
+ * We use the peripheral timers for system tick, the cpu global timer for
+ * profile tick
+ */
+static void kona_timer_disable_and_clear(void __iomem *base)
+{
+	uint32_t reg;
+
+	/*
+	 * clear and disable interrupts
+	 * We are using compare/match register 0 for our system interrupts
+	 */
+	reg = readl(base + KONA_GPTIMER_STCS_OFFSET);
+
+	/* Clear compare (0) interrupt */
+	reg |= 1 << KONA_GPTIMER_STCS_TIMER_MATCH_SHIFT;
+	/* disable compare */
+	reg &= ~(1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+
+	writel(reg, base + KONA_GPTIMER_STCS_OFFSET);
+
+}
+
+static void
+kona_timer_get_counter(void *timer_base, uint32_t *msw, uint32_t *lsw)
+{
+	void __iomem *base = IOMEM(timer_base);
+	int loop_limit = 4;
+
+	/*
+	 * Read 64-bit free running counter
+	 * 1. Read hi-word
+	 * 2. Read low-word
+	 * 3. Read hi-word again
+	 * 4.1
+	 *      if new hi-word is not equal to previously read hi-word, then
+	 *      start from #1
+	 * 4.2
+	 *      if new hi-word is equal to previously read hi-word then stop.
+	 */
+
+	while (--loop_limit) {
+		*msw = readl(base + KONA_GPTIMER_STCHI_OFFSET);
+		*lsw = readl(base + KONA_GPTIMER_STCLO_OFFSET);
+		if (*msw == readl(base + KONA_GPTIMER_STCHI_OFFSET))
+			break;
+	}
+	if (!loop_limit) {
+		pr_err("bcm_kona_timer: getting counter failed.\n");
+		pr_err(" Timer will be impacted\n");
+	}
+
+	return;
+}
+
+static const struct of_device_id bcm_timer_ids[] __initconst = {
+	{.compatible = "bcm,kona-timer"},
+	{},
+};
+
+static void __init kona_timers_init(void)
+{
+	struct device_node *node;
+	u32 freq;
+
+	node = of_find_matching_node(NULL, bcm_timer_ids);
+
+	if (!node)
+		panic("No timer");
+
+	if (!of_property_read_u32(node, "clock-frequency", &freq))
+		arch_timer_rate = freq;
+	else
+		panic("clock-frequency not set in the .dts file");
+
+	/* Setup IRQ numbers */
+	timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+	/* Setup IO addresses */
+	timers.tmr_regs = of_iomap(node, 0);
+
+	kona_timer_disable_and_clear(timers.tmr_regs);
+}
+
+static int kona_timer_set_next_event(unsigned long clc,
+				  struct clock_event_device *unused)
+{
+	/*
+	 * timer (0) is disabled by the timer interrupt already
+	 * so, here we reload the next event value and re-enable
+	 * the timer.
+	 *
+	 * This way, we are potentially losing the time between
+	 * timer-interrupt->set_next_event. CPU local timers, when
+	 * they come in should get rid of skew.
+	 */
+
+	uint32_t lsw, msw;
+	uint32_t reg;
+
+	kona_timer_get_counter(timers.tmr_regs, &msw, &lsw);
+
+	/* Load the "next" event tick value */
+	writel(lsw + clc, timers.tmr_regs + KONA_GPTIMER_STCM0_OFFSET);
+
+	/* Enable compare */
+	reg = readl(timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+	reg |= (1 << KONA_GPTIMER_STCS_COMPARE_ENABLE_SHIFT);
+	writel(reg, timers.tmr_regs + KONA_GPTIMER_STCS_OFFSET);
+
+	return 0;
+}
+
+static void kona_timer_set_mode(enum clock_event_mode mode,
+			     struct clock_event_device *unused)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* by default mode is one shot don't do any thing */
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	default:
+		kona_timer_disable_and_clear(timers.tmr_regs);
+	}
+}
+
+static struct clock_event_device kona_clockevent_timer = {
+	.name = "timer 1",
+	.features = CLOCK_EVT_FEAT_ONESHOT,
+	.set_next_event = kona_timer_set_next_event,
+	.set_mode = kona_timer_set_mode
+};
+
+static void __init kona_timer_clockevents_init(void)
+{
+	kona_clockevent_timer.cpumask = cpumask_of(0);
+	clockevents_config_and_register(&kona_clockevent_timer,
+		arch_timer_rate, 6, 0xffffffff);
+}
+
+static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = &kona_clockevent_timer;
+
+	kona_timer_disable_and_clear(timers.tmr_regs);
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static struct irqaction kona_timer_irq = {
+	.name = "Kona Timer Tick",
+	.flags = IRQF_TIMER,
+	.handler = kona_timer_interrupt,
+};
+
+static void __init kona_timer_init(void)
+{
+	kona_timers_init();
+	kona_timer_clockevents_init();
+	setup_irq(timers.tmr_irq, &kona_timer_irq);
+	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
+}
+
+CLOCKSOURCE_OF_DECLARE(bcm_kona, "bcm,kona-timer",
+	kona_timer_init);

fs/proc/base.c

@@ -86,6 +86,7 @@
 #include <linux/fs_struct.h>
 #include <linux/slab.h>
 #include <linux/flex_array.h>
+#include <linux/posix-timers.h>
 #ifdef CONFIG_HARDWALL
 #include <asm/hardwall.h>
 #endif
@@ -2013,6 +2014,102 @@ static const struct file_operations proc_map_files_operations = {
 	.llseek		= default_llseek,
 };
 
+struct timers_private {
+	struct pid *pid;
+	struct task_struct *task;
+	struct sighand_struct *sighand;
+	struct pid_namespace *ns;
+	unsigned long flags;
+};
+
+static void *timers_start(struct seq_file *m, loff_t *pos)
+{
+	struct timers_private *tp = m->private;
+
+	tp->task = get_pid_task(tp->pid, PIDTYPE_PID);
+	if (!tp->task)
+		return ERR_PTR(-ESRCH);
+
+	tp->sighand = lock_task_sighand(tp->task, &tp->flags);
+	if (!tp->sighand)
+		return ERR_PTR(-ESRCH);
+
+	return seq_list_start(&tp->task->signal->posix_timers, *pos);
+}
+
+static void *timers_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	struct timers_private *tp = m->private;
+	return seq_list_next(v, &tp->task->signal->posix_timers, pos);
+}
+
+static void timers_stop(struct seq_file *m, void *v)
+{
+	struct timers_private *tp = m->private;
+
+	if (tp->sighand) {
+		unlock_task_sighand(tp->task, &tp->flags);
+		tp->sighand = NULL;
+	}
+
+	if (tp->task) {
+		put_task_struct(tp->task);
+		tp->task = NULL;
+	}
+}
+
+static int show_timer(struct seq_file *m, void *v)
+{
+	struct k_itimer *timer;
+	struct timers_private *tp = m->private;
+	int notify;
+	static char *nstr[] = {
+		[SIGEV_SIGNAL] = "signal",
+		[SIGEV_NONE] = "none",
+		[SIGEV_THREAD] = "thread",
+	};
+
+	timer = list_entry((struct list_head *)v, struct k_itimer, list);
+	notify = timer->it_sigev_notify;
+
+	seq_printf(m, "ID: %d\n", timer->it_id);
+	seq_printf(m, "signal: %d/%p\n", timer->sigq->info.si_signo,
+			timer->sigq->info.si_value.sival_ptr);
+	seq_printf(m, "notify: %s/%s.%d\n",
+		nstr[notify & ~SIGEV_THREAD_ID],
+		(notify & SIGEV_THREAD_ID) ? "tid" : "pid",
+		pid_nr_ns(timer->it_pid, tp->ns));
+
+	return 0;
+}
+
+static const struct seq_operations proc_timers_seq_ops = {
+	.start	= timers_start,
+	.next	= timers_next,
+	.stop	= timers_stop,
+	.show	= show_timer,
+};
+
+static int proc_timers_open(struct inode *inode, struct file *file)
+{
+	struct timers_private *tp;
+
+	tp = __seq_open_private(file, &proc_timers_seq_ops,
+			sizeof(struct timers_private));
+	if (!tp)
+		return -ENOMEM;
+
+	tp->pid = proc_pid(inode);
+	tp->ns = inode->i_sb->s_fs_info;
+	return 0;
+}
+
+static const struct file_operations proc_timers_operations = {
+	.open		= proc_timers_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release_private,
+};
 #endif /* CONFIG_CHECKPOINT_RESTORE */
 
 static struct dentry *proc_pident_instantiate(struct inode *dir,
@@ -2583,6 +2680,9 @@ static const struct pid_entry tgid_base_stuff[] = {
 	REG("gid_map",    S_IRUGO|S_IWUSR, proc_gid_map_operations),
 	REG("projid_map", S_IRUGO|S_IWUSR, proc_projid_map_operations),
 #endif
+#ifdef CONFIG_CHECKPOINT_RESTORE
+	REG("timers",	  S_IRUGO, proc_timers_operations),
+#endif
 };
 
 static int proc_tgid_base_readdir(struct file * filp,

include/linux/clockchips.h

@@ -55,6 +55,11 @@ enum clock_event_nofitiers {
 #define CLOCK_EVT_FEAT_C3STOP		0x000008
 #define CLOCK_EVT_FEAT_DUMMY		0x000010
 
+/*
+ * Core shall set the interrupt affinity dynamically in broadcast mode
+ */
+#define CLOCK_EVT_FEAT_DYNIRQ		0x000020
+
 /**
  * struct clock_event_device - clock event device descriptor
  * @event_handler:	Assigned by the framework to be called by the low
@@ -170,6 +175,12 @@ extern void tick_broadcast(const struct cpumask *mask);
 extern int tick_receive_broadcast(void);
 #endif
 
+#if defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) && defined(CONFIG_TICK_ONESHOT)
+extern int tick_check_broadcast_expired(void);
+#else
+static inline int tick_check_broadcast_expired(void) { return 0; }
+#endif
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 extern void clockevents_notify(unsigned long reason, void *arg);
 #else
@@ -182,6 +193,7 @@ static inline void clockevents_suspend(void) {}
 static inline void clockevents_resume(void) {}
 
 #define clockevents_notify(reason, arg) do { } while (0)
+static inline int tick_check_broadcast_expired(void) { return 0; }
 
 #endif
 

include/linux/clocksource.h

@@ -206,6 +206,7 @@ struct clocksource {
 #define CLOCK_SOURCE_WATCHDOG			0x10
 #define CLOCK_SOURCE_VALID_FOR_HRES		0x20
 #define CLOCK_SOURCE_UNSTABLE			0x40
+#define CLOCK_SOURCE_SUSPEND_NONSTOP		0x80
 
 /* simplify initialization of mask field */
 #define CLOCKSOURCE_MASK(bits) (cycle_t)((bits) < 64 ? ((1ULL<<(bits))-1) : -1)

include/linux/hrtimer.h

@@ -157,6 +157,7 @@ enum  hrtimer_base_type {
 	HRTIMER_BASE_MONOTONIC,
 	HRTIMER_BASE_REALTIME,
 	HRTIMER_BASE_BOOTTIME,
+	HRTIMER_BASE_TAI,
 	HRTIMER_MAX_CLOCK_BASES,
 };
 
@@ -327,7 +328,9 @@ extern ktime_t ktime_get(void);
 extern ktime_t ktime_get_real(void);
 extern ktime_t ktime_get_boottime(void);
 extern ktime_t ktime_get_monotonic_offset(void);
-extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot);
+extern ktime_t ktime_get_clocktai(void);
+extern ktime_t ktime_get_update_offsets(ktime_t *offs_real, ktime_t *offs_boot,
+					 ktime_t *offs_tai);
 
 DECLARE_PER_CPU(struct tick_device, tick_cpu_device);
 

include/linux/jiffies.h

@@ -75,7 +75,6 @@ extern int register_refined_jiffies(long clock_tick_rate);
  */
 extern u64 __jiffy_data jiffies_64;
 extern unsigned long volatile __jiffy_data jiffies;
-extern seqlock_t jiffies_lock;
 
 #if (BITS_PER_LONG < 64)
 u64 get_jiffies_64(void);

include/linux/posix-timers.h

@@ -55,6 +55,7 @@ struct cpu_timer_list {
 /* POSIX.1b interval timer structure. */
 struct k_itimer {
 	struct list_head list;		/* free/ allocate list */
+	struct hlist_node t_hash;
 	spinlock_t it_lock;
 	clockid_t it_clock;		/* which timer type */
 	timer_t it_id;			/* timer id */

include/linux/sched.h

@@ -514,6 +514,7 @@ struct signal_struct {
 	unsigned int		has_child_subreaper:1;
 
 	/* POSIX.1b Interval Timers */
+	int			posix_timer_id;
 	struct list_head	posix_timers;
 
 	/* ITIMER_REAL timer for the process */

include/linux/time.h

@@ -181,6 +181,9 @@ extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
 extern int timekeeping_valid_for_hres(void);
 extern u64 timekeeping_max_deferment(void);
 extern int timekeeping_inject_offset(struct timespec *ts);
+extern s32 timekeeping_get_tai_offset(void);
+extern void timekeeping_set_tai_offset(s32 tai_offset);
+extern void timekeeping_clocktai(struct timespec *ts);
 
 struct tms;
 extern void do_sys_times(struct tms *);

include/linux/timekeeper_internal.h

@@ -20,6 +20,8 @@ struct timekeeper {
 	u32			shift;
 	/* Number of clock cycles in one NTP interval. */
 	cycle_t			cycle_interval;
+	/* Last cycle value (also stored in clock->cycle_last) */
+	cycle_t			cycle_last;
 	/* Number of clock shifted nano seconds in one NTP interval. */
 	u64			xtime_interval;
 	/* shifted nano seconds left over when rounding cycle_interval */
@@ -62,8 +64,11 @@ struct timekeeper {
 	ktime_t			offs_boot;
 	/* The raw monotonic time for the CLOCK_MONOTONIC_RAW posix clock. */
 	struct timespec		raw_time;
-	/* Seqlock for all timekeeper values */
-	seqlock_t		lock;
+	/* The current UTC to TAI offset in seconds */
+	s32			tai_offset;
+	/* Offset clock monotonic -> clock tai */
+	ktime_t			offs_tai;
+
 };
 
 static inline struct timespec tk_xtime(struct timekeeper *tk)

include/linux/timex.h

@@ -125,9 +125,6 @@
 extern unsigned long tick_usec;		/* USER_HZ period (usec) */
 extern unsigned long tick_nsec;		/* SHIFTED_HZ period (nsec) */
 
-extern void ntp_init(void);
-extern void ntp_clear(void);
-
 /* Required to safely shift negative values */
 #define shift_right(x, s) ({	\
 	__typeof__(x) __x = (x);	\
@@ -140,10 +137,6 @@ extern void ntp_clear(void);
 #define NTP_INTERVAL_FREQ  (HZ)
 #define NTP_INTERVAL_LENGTH (NSEC_PER_SEC/NTP_INTERVAL_FREQ)
 
-/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
-extern u64 ntp_tick_length(void);
-
-extern int second_overflow(unsigned long secs);
 extern int do_adjtimex(struct timex *);
 extern void hardpps(const struct timespec *, const struct timespec *);
 

include/uapi/linux/time.h

@@ -54,11 +54,9 @@ struct itimerval {
 #define CLOCK_BOOTTIME			7
 #define CLOCK_REALTIME_ALARM		8
 #define CLOCK_BOOTTIME_ALARM		9
+#define CLOCK_SGI_CYCLE			10	/* Hardware specific */
+#define CLOCK_TAI			11
 
-/*
- * The IDs of various hardware clocks:
- */
-#define CLOCK_SGI_CYCLE			10
 #define MAX_CLOCKS			16
 #define CLOCKS_MASK			(CLOCK_REALTIME | CLOCK_MONOTONIC)
 #define CLOCKS_MONO			CLOCK_MONOTONIC

init/main.c

@@ -495,7 +495,6 @@ asmlinkage void __init start_kernel(void)
  * Interrupts are still disabled. Do necessary setups, then
  * enable them
  */
-	tick_init();
 	boot_cpu_init();
 	page_address_init();
 	pr_notice("%s", linux_banner);
@@ -549,6 +548,7 @@ asmlinkage void __init start_kernel(void)
 	/* init some links before init_ISA_irqs() */
 	early_irq_init();
 	init_IRQ();
+	tick_init();
 	init_timers();
 	hrtimers_init();
 	softirq_init();

kernel/cpu/idle.c

@@ -76,7 +76,16 @@ static void cpu_idle_loop(void)
 			local_irq_disable();
 			arch_cpu_idle_enter();
 
-			if (cpu_idle_force_poll) {
+			/*
+			 * In poll mode we reenable interrupts and spin.
+			 *
+			 * Also if we detected in the wakeup from idle
+			 * path that the tick broadcast device expired
+			 * for us, we don't want to go deep idle as we
+			 * know that the IPI is going to arrive right
+			 * away
+			 */
+			if (cpu_idle_force_poll || tick_check_broadcast_expired()) {
 				cpu_idle_poll();
 			} else {
 				current_clr_polling();

kernel/hrtimer.c

@@ -84,6 +84,12 @@ DEFINE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases) =
 			.get_time = &ktime_get_boottime,
 			.resolution = KTIME_LOW_RES,
 		},
+		{
+			.index = HRTIMER_BASE_TAI,
+			.clockid = CLOCK_TAI,
+			.get_time = &ktime_get_clocktai,
+			.resolution = KTIME_LOW_RES,
+		},
 	}
 };
 
@@ -91,6 +97,7 @@ static const int hrtimer_clock_to_base_table[MAX_CLOCKS] = {
 	[CLOCK_REALTIME]	= HRTIMER_BASE_REALTIME,
 	[CLOCK_MONOTONIC]	= HRTIMER_BASE_MONOTONIC,
 	[CLOCK_BOOTTIME]	= HRTIMER_BASE_BOOTTIME,
+	[CLOCK_TAI]		= HRTIMER_BASE_TAI,
 };
 
 static inline int hrtimer_clockid_to_base(clockid_t clock_id)
@@ -107,8 +114,10 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 {
 	ktime_t xtim, mono, boot;
 	struct timespec xts, tom, slp;
+	s32 tai_offset;
 
 	get_xtime_and_monotonic_and_sleep_offset(&xts, &tom, &slp);
+	tai_offset = timekeeping_get_tai_offset();
 
 	xtim = timespec_to_ktime(xts);
 	mono = ktime_add(xtim, timespec_to_ktime(tom));
@@ -116,6 +125,8 @@ static void hrtimer_get_softirq_time(struct hrtimer_cpu_base *base)
 	base->clock_base[HRTIMER_BASE_REALTIME].softirq_time = xtim;
 	base->clock_base[HRTIMER_BASE_MONOTONIC].softirq_time = mono;
 	base->clock_base[HRTIMER_BASE_BOOTTIME].softirq_time = boot;
+	base->clock_base[HRTIMER_BASE_TAI].softirq_time =
+				ktime_add(xtim,	ktime_set(tai_offset, 0));
 }
 
 /*
@@ -276,6 +287,10 @@ ktime_t ktime_add_ns(const ktime_t kt, u64 nsec)
 	} else {
 		unsigned long rem = do_div(nsec, NSEC_PER_SEC);
 
+		/* Make sure nsec fits into long */
+		if (unlikely(nsec > KTIME_SEC_MAX))
+			return (ktime_t){ .tv64 = KTIME_MAX };
+
 		tmp = ktime_set((long)nsec, rem);
 	}
 
@@ -652,8 +667,9 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
 {
 	ktime_t *offs_real = &base->clock_base[HRTIMER_BASE_REALTIME].offset;
 	ktime_t *offs_boot = &base->clock_base[HRTIMER_BASE_BOOTTIME].offset;
+	ktime_t *offs_tai = &base->clock_base[HRTIMER_BASE_TAI].offset;
 
-	return ktime_get_update_offsets(offs_real, offs_boot);
+	return ktime_get_update_offsets(offs_real, offs_boot, offs_tai);
 }
 
 /*
@@ -1011,7 +1027,8 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
  * @timer:	the timer to be added
  * @tim:	expiry time
  * @delta_ns:	"slack" range for the timer
- * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ * @mode:	expiry mode: absolute (HRTIMER_MODE_ABS) or
+ *		relative (HRTIMER_MODE_REL)
  *
  * Returns:
  *  0 on success
@@ -1028,7 +1045,8 @@ EXPORT_SYMBOL_GPL(hrtimer_start_range_ns);
  * hrtimer_start - (re)start an hrtimer on the current CPU
  * @timer:	the timer to be added
  * @tim:	expiry time
- * @mode:	expiry mode: absolute (HRTIMER_ABS) or relative (HRTIMER_REL)
+ * @mode:	expiry mode: absolute (HRTIMER_MODE_ABS) or
+ *		relative (HRTIMER_MODE_REL)
  *
  * Returns:
  *  0 on success
@@ -1310,6 +1328,8 @@ void hrtimer_interrupt(struct clock_event_device *dev)
 
 				expires = ktime_sub(hrtimer_get_expires(timer),
 						    base->offset);
+				if (expires.tv64 < 0)
+					expires.tv64 = KTIME_MAX;
 				if (expires.tv64 < expires_next.tv64)
 					expires_next = expires;
 				break;

kernel/posix-timers.c

@@ -40,38 +40,31 @@
 #include <linux/list.h>
 #include <linux/init.h>
 #include <linux/compiler.h>
-#include <linux/idr.h>
+#include <linux/hash.h>
 #include <linux/posix-clock.h>
 #include <linux/posix-timers.h>
 #include <linux/syscalls.h>
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/export.h>
+#include <linux/hashtable.h>
 
 /*
- * Management arrays for POSIX timers.	 Timers are kept in slab memory
- * Timer ids are allocated by an external routine that keeps track of the
- * id and the timer.  The external interface is:
- *
- * void *idr_find(struct idr *idp, int id);           to find timer_id <id>
- * int idr_get_new(struct idr *idp, void *ptr);       to get a new id and
- *                                                    related it to <ptr>
- * void idr_remove(struct idr *idp, int id);          to release <id>
- * void idr_init(struct idr *idp);                    to initialize <idp>
- *                                                    which we supply.
- * The idr_get_new *may* call slab for more memory so it must not be
- * called under a spin lock.  Likewise idr_remore may release memory
- * (but it may be ok to do this under a lock...).
- * idr_find is just a memory look up and is quite fast.  A -1 return
- * indicates that the requested id does not exist.
+ * Management arrays for POSIX timers. Timers are now kept in static hash table
+ * with 512 entries.
+ * Timer ids are allocated by local routine, which selects proper hash head by
+ * key, constructed from current->signal address and per signal struct counter.
+ * This keeps timer ids unique per process, but now they can intersect between
+ * processes.
  */
 
 /*
  * Lets keep our timers in a slab cache :-)
  */
 static struct kmem_cache *posix_timers_cache;
-static struct idr posix_timers_id;
-static DEFINE_SPINLOCK(idr_lock);
+
+static DEFINE_HASHTABLE(posix_timers_hashtable, 9);
+static DEFINE_SPINLOCK(hash_lock);
 
 /*
  * we assume that the new SIGEV_THREAD_ID shares no bits with the other
@@ -152,6 +145,56 @@ static struct k_itimer *__lock_timer(timer_t timer_id, unsigned long *flags);
 	__timr;								   \
 })
 
+static int hash(struct signal_struct *sig, unsigned int nr)
+{
+	return hash_32(hash32_ptr(sig) ^ nr, HASH_BITS(posix_timers_hashtable));
+}
+
+static struct k_itimer *__posix_timers_find(struct hlist_head *head,
+					    struct signal_struct *sig,
+					    timer_t id)
+{
+	struct k_itimer *timer;
+
+	hlist_for_each_entry_rcu(timer, head, t_hash) {
+		if ((timer->it_signal == sig) && (timer->it_id == id))
+			return timer;
+	}
+	return NULL;
+}
+
+static struct k_itimer *posix_timer_by_id(timer_t id)
+{
+	struct signal_struct *sig = current->signal;
+	struct hlist_head *head = &posix_timers_hashtable[hash(sig, id)];
+
+	return __posix_timers_find(head, sig, id);
+}
+
+static int posix_timer_add(struct k_itimer *timer)
+{
+	struct signal_struct *sig = current->signal;
+	int first_free_id = sig->posix_timer_id;
+	struct hlist_head *head;
+	int ret = -ENOENT;
+
+	do {
+		spin_lock(&hash_lock);
+		head = &posix_timers_hashtable[hash(sig, sig->posix_timer_id)];
+		if (!__posix_timers_find(head, sig, sig->posix_timer_id)) {
+			hlist_add_head_rcu(&timer->t_hash, head);
+			ret = sig->posix_timer_id;
+		}
+		if (++sig->posix_timer_id < 0)
+			sig->posix_timer_id = 0;
+		if ((sig->posix_timer_id == first_free_id) && (ret == -ENOENT))
+			/* Loop over all possible ids completed */
+			ret = -EAGAIN;
+		spin_unlock(&hash_lock);
+	} while (ret == -ENOENT);
+	return ret;
+}
+
 static inline void unlock_timer(struct k_itimer *timr, unsigned long flags)
 {
 	spin_unlock_irqrestore(&timr->it_lock, flags);
@@ -221,6 +264,11 @@ static int posix_get_boottime(const clockid_t which_clock, struct timespec *tp)
 	return 0;
 }
 
+static int posix_get_tai(clockid_t which_clock, struct timespec *tp)
+{
+	timekeeping_clocktai(tp);
+	return 0;
+}
 
 /*
  * Initialize everything, well, just everything in Posix clocks/timers ;)
@@ -261,6 +309,16 @@ static __init int init_posix_timers(void)
 		.clock_getres	= posix_get_coarse_res,
 		.clock_get	= posix_get_monotonic_coarse,
 	};
+	struct k_clock clock_tai = {
+		.clock_getres	= hrtimer_get_res,
+		.clock_get	= posix_get_tai,
+		.nsleep		= common_nsleep,
+		.nsleep_restart	= hrtimer_nanosleep_restart,
+		.timer_create	= common_timer_create,
+		.timer_set	= common_timer_set,
+		.timer_get	= common_timer_get,
+		.timer_del	= common_timer_del,
+	};
 	struct k_clock clock_boottime = {
 		.clock_getres	= hrtimer_get_res,
 		.clock_get	= posix_get_boottime,
@@ -278,11 +336,11 @@ static __init int init_posix_timers(void)
 	posix_timers_register_clock(CLOCK_REALTIME_COARSE, &clock_realtime_coarse);
 	posix_timers_register_clock(CLOCK_MONOTONIC_COARSE, &clock_monotonic_coarse);
 	posix_timers_register_clock(CLOCK_BOOTTIME, &clock_boottime);
+	posix_timers_register_clock(CLOCK_TAI, &clock_tai);
 
 	posix_timers_cache = kmem_cache_create("posix_timers_cache",
 					sizeof (struct k_itimer), 0, SLAB_PANIC,
 					NULL);
-	idr_init(&posix_timers_id);
 	return 0;
 }
 
@@ -504,9 +562,9 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 {
 	if (it_id_set) {
 		unsigned long flags;
-		spin_lock_irqsave(&idr_lock, flags);
-		idr_remove(&posix_timers_id, tmr->it_id);
-		spin_unlock_irqrestore(&idr_lock, flags);
+		spin_lock_irqsave(&hash_lock, flags);
+		hlist_del_rcu(&tmr->t_hash);
+		spin_unlock_irqrestore(&hash_lock, flags);
 	}
 	put_pid(tmr->it_pid);
 	sigqueue_free(tmr->sigq);
@@ -552,22 +610,11 @@ SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
 		return -EAGAIN;
 
 	spin_lock_init(&new_timer->it_lock);
-
-	idr_preload(GFP_KERNEL);
-	spin_lock_irq(&idr_lock);
-	error = idr_alloc(&posix_timers_id, new_timer, 0, 0, GFP_NOWAIT);
-	spin_unlock_irq(&idr_lock);
-	idr_preload_end();
-	if (error < 0) {
-		/*
-		 * Weird looking, but we return EAGAIN if the IDR is
-		 * full (proper POSIX return value for this)
-		 */
-		if (error == -ENOSPC)
-			error = -EAGAIN;
+	new_timer_id = posix_timer_add(new_timer);
+	if (new_timer_id < 0) {
+		error = new_timer_id;
 		goto out;
 	}
-	new_timer_id = error;
 
 	it_id_set = IT_ID_SET;
 	new_timer->it_id = (timer_t) new_timer_id;
@@ -645,7 +692,7 @@ static struct k_itimer *__lock_timer(timer_t timer_id, unsigned long *flags)
 		return NULL;
 
 	rcu_read_lock();
-	timr = idr_find(&posix_timers_id, (int)timer_id);
+	timr = posix_timer_by_id(timer_id);
 	if (timr) {
 		spin_lock_irqsave(&timr->it_lock, *flags);
 		if (timr->it_signal == current->signal) {

kernel/time.c

@@ -138,13 +138,14 @@ int persistent_clock_is_local;
  */
 static inline void warp_clock(void)
 {
+	if (sys_tz.tz_minuteswest != 0) {
 		struct timespec adjust;
 
-	adjust = current_kernel_time();
-	if (sys_tz.tz_minuteswest != 0)
 		persistent_clock_is_local = 1;
-	adjust.tv_sec += sys_tz.tz_minuteswest * 60;
-	do_settimeofday(&adjust);
+		adjust.tv_sec = sys_tz.tz_minuteswest * 60;
+		adjust.tv_nsec = 0;
+		timekeeping_inject_offset(&adjust);
+	}
 }
 
 /*

kernel/time/ntp.c

@@ -18,13 +18,14 @@
 #include <linux/rtc.h>
 
 #include "tick-internal.h"
+#include "ntp_internal.h"
 
 /*
  * NTP timekeeping variables:
+ *
+ * Note: All of the NTP state is protected by the timekeeping locks.
  */
 
-DEFINE_RAW_SPINLOCK(ntp_lock);
-
 
 /* USER_HZ period (usecs): */
 unsigned long			tick_usec = TICK_USEC;
@@ -53,9 +54,6 @@ static int			time_state = TIME_OK;
 /* clock status bits:							*/
 static int			time_status = STA_UNSYNC;
 
-/* TAI offset (secs):							*/
-static long			time_tai;
-
 /* time adjustment (nsecs):						*/
 static s64			time_offset;
 
@@ -134,8 +132,6 @@ static inline void pps_reset_freq_interval(void)
 
 /**
  * pps_clear - Clears the PPS state variables
- *
- * Must be called while holding a write on the ntp_lock
  */
 static inline void pps_clear(void)
 {
@@ -150,8 +146,6 @@ static inline void pps_clear(void)
 /* Decrease pps_valid to indicate that another second has passed since
  * the last PPS signal. When it reaches 0, indicate that PPS signal is
  * missing.
- *
- * Must be called while holding a write on the ntp_lock
  */
 static inline void pps_dec_valid(void)
 {
@@ -346,10 +340,6 @@ static void ntp_update_offset(long offset)
  */
 void ntp_clear(void)
 {
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&ntp_lock, flags);
-
 	time_adjust	= 0;		/* stop active adjtime() */
 	time_status	|= STA_UNSYNC;
 	time_maxerror	= NTP_PHASE_LIMIT;
@@ -362,20 +352,12 @@ void ntp_clear(void)
 
 	/* Clear PPS state variables */
 	pps_clear();
-	raw_spin_unlock_irqrestore(&ntp_lock, flags);
-
 }
 
 
 u64 ntp_tick_length(void)
 {
-	unsigned long flags;
-	s64 ret;
-
-	raw_spin_lock_irqsave(&ntp_lock, flags);
-	ret = tick_length;
-	raw_spin_unlock_irqrestore(&ntp_lock, flags);
-	return ret;
+	return tick_length;
 }
 
 
@@ -393,9 +375,6 @@ int second_overflow(unsigned long secs)
 {
 	s64 delta;
 	int leap = 0;
-	unsigned long flags;
-
-	raw_spin_lock_irqsave(&ntp_lock, flags);
 
 	/*
 	 * Leap second processing. If in leap-insert state at the end of the
@@ -415,7 +394,6 @@ int second_overflow(unsigned long secs)
 		else if (secs % 86400 == 0) {
 			leap = -1;
 			time_state = TIME_OOP;
-			time_tai++;
 			printk(KERN_NOTICE
 				"Clock: inserting leap second 23:59:60 UTC\n");
 		}
@@ -425,7 +403,6 @@ int second_overflow(unsigned long secs)
 			time_state = TIME_OK;
 		else if ((secs + 1) % 86400 == 0) {
 			leap = 1;
-			time_tai--;
 			time_state = TIME_WAIT;
 			printk(KERN_NOTICE
 				"Clock: deleting leap second 23:59:59 UTC\n");
@@ -479,8 +456,6 @@ int second_overflow(unsigned long secs)
 	time_adjust = 0;
 
 out:
-	raw_spin_unlock_irqrestore(&ntp_lock, flags);
-
 	return leap;
 }
 
@@ -575,11 +550,10 @@ static inline void process_adj_status(struct timex *txc, struct timespec *ts)
 	time_status |= txc->status & ~STA_RONLY;
 }
 
-/*
- * Called with ntp_lock held, so we can access and modify
- * all the global NTP state:
- */
-static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts)
+
+static inline void process_adjtimex_modes(struct timex *txc,
+						struct timespec *ts,
+						s32 *time_tai)
 {
 	if (txc->modes & ADJ_STATUS)
 		process_adj_status(txc, ts);
@@ -613,7 +587,7 @@ static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts
 	}
 
 	if (txc->modes & ADJ_TAI && txc->constant > 0)
-		time_tai = txc->constant;
+		*time_tai = txc->constant;
 
 	if (txc->modes & ADJ_OFFSET)
 		ntp_update_offset(txc->offset);
@@ -625,16 +599,13 @@ static inline void process_adjtimex_modes(struct timex *txc, struct timespec *ts
 		ntp_update_frequency();
 }
 
-/*
- * adjtimex mainly allows reading (and writing, if superuser) of
- * kernel time-keeping variables. used by xntpd.
+
+
+/**
+ * ntp_validate_timex - Ensures the timex is ok for use in do_adjtimex
  */
-int do_adjtimex(struct timex *txc)
+int ntp_validate_timex(struct timex *txc)
 {
-	struct timespec ts;
-	int result;
-
-	/* Validate the data before disabling interrupts */
 	if (txc->modes & ADJ_ADJTIME) {
 		/* singleshot must not be used with any other mode bits */
 		if (!(txc->modes & ADJ_OFFSET_SINGLESHOT))
@@ -646,7 +617,6 @@ int do_adjtimex(struct timex *txc)
 		/* In order to modify anything, you gotta be super-user! */
 		 if (txc->modes && !capable(CAP_SYS_TIME))
 			return -EPERM;
-
 		/*
 		 * if the quartz is off by more than 10% then
 		 * something is VERY wrong!
@@ -657,22 +627,20 @@ int do_adjtimex(struct timex *txc)
 			return -EINVAL;
 	}
 
-	if (txc->modes & ADJ_SETOFFSET) {
-		struct timespec delta;
-		delta.tv_sec  = txc->time.tv_sec;
-		delta.tv_nsec = txc->time.tv_usec;
-		if (!capable(CAP_SYS_TIME))
+	if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
 		return -EPERM;
-		if (!(txc->modes & ADJ_NANO))
-			delta.tv_nsec *= 1000;
-		result = timekeeping_inject_offset(&delta);
-		if (result)
-			return result;
-	}
 
-	getnstimeofday(&ts);
+	return 0;
+}
+
 
-	raw_spin_lock_irq(&ntp_lock);
+/*
+ * adjtimex mainly allows reading (and writing, if superuser) of
+ * kernel time-keeping variables. used by xntpd.
+ */
+int __do_adjtimex(struct timex *txc, struct timespec *ts, s32 *time_tai)
+{
+	int result;
 
 	if (txc->modes & ADJ_ADJTIME) {
 		long save_adjust = time_adjust;
@@ -687,7 +655,7 @@ int do_adjtimex(struct timex *txc)
 
 		/* If there are input parameters, then process them: */
 		if (txc->modes)
-			process_adjtimex_modes(txc, &ts);
+			process_adjtimex_modes(txc, ts, time_tai);
 
 		txc->offset = shift_right(time_offset * NTP_INTERVAL_FREQ,
 				  NTP_SCALE_SHIFT);
@@ -709,15 +677,13 @@ int do_adjtimex(struct timex *txc)
 	txc->precision	   = 1;
 	txc->tolerance	   = MAXFREQ_SCALED / PPM_SCALE;
 	txc->tick	   = tick_usec;
-	txc->tai	   = time_tai;
+	txc->tai	   = *time_tai;
 
 	/* fill PPS status fields */
 	pps_fill_timex(txc);
 
-	raw_spin_unlock_irq(&ntp_lock);
-
-	txc->time.tv_sec = ts.tv_sec;
-	txc->time.tv_usec = ts.tv_nsec;
+	txc->time.tv_sec = ts->tv_sec;
+	txc->time.tv_usec = ts->tv_nsec;
 	if (!(time_status & STA_NANO))
 		txc->time.tv_usec /= NSEC_PER_USEC;
 
@@ -894,7 +860,7 @@ static void hardpps_update_phase(long error)
 }
 
 /*
- * hardpps() - discipline CPU clock oscillator to external PPS signal
+ * __hardpps() - discipline CPU clock oscillator to external PPS signal
  *
  * This routine is called at each PPS signal arrival in order to
  * discipline the CPU clock oscillator to the PPS signal. It takes two
@@ -905,15 +871,13 @@ static void hardpps_update_phase(long error)
  * This code is based on David Mills's reference nanokernel
  * implementation. It was mostly rewritten but keeps the same idea.
  */
-void hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
+void __hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
 {
 	struct pps_normtime pts_norm, freq_norm;
 	unsigned long flags;
 
 	pts_norm = pps_normalize_ts(*phase_ts);
 
-	raw_spin_lock_irqsave(&ntp_lock, flags);
-
 	/* clear the error bits, they will be set again if needed */
 	time_status &= ~(STA_PPSJITTER | STA_PPSWANDER | STA_PPSERROR);
 
@@ -925,7 +889,6 @@ void hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
 	 * just start the frequency interval */
 	if (unlikely(pps_fbase.tv_sec == 0)) {
 		pps_fbase = *raw_ts;
-		raw_spin_unlock_irqrestore(&ntp_lock, flags);
 		return;
 	}
 
@@ -940,7 +903,6 @@ void hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
 		time_status |= STA_PPSJITTER;
 		/* restart the frequency calibration interval */
 		pps_fbase = *raw_ts;
-		raw_spin_unlock_irqrestore(&ntp_lock, flags);
 		pr_err("hardpps: PPSJITTER: bad pulse\n");
 		return;
 	}
@@ -957,10 +919,7 @@ void hardpps(const struct timespec *phase_ts, const struct timespec *raw_ts)
 
 	hardpps_update_phase(pts_norm.nsec);
 
-	raw_spin_unlock_irqrestore(&ntp_lock, flags);
 }
-EXPORT_SYMBOL(hardpps);
-
 #endif	/* CONFIG_NTP_PPS */
 
 static int __init ntp_tick_adj_setup(char *str)

kernel/time/ntp_internal.h

+#ifndef _LINUX_NTP_INTERNAL_H
+#define _LINUX_NTP_INTERNAL_H
+
+extern void ntp_init(void);
+extern void ntp_clear(void);
+/* Returns how long ticks are at present, in ns / 2^NTP_SCALE_SHIFT. */
+extern u64 ntp_tick_length(void);
+extern int second_overflow(unsigned long secs);
+extern int ntp_validate_timex(struct timex *);
+extern int __do_adjtimex(struct timex *, struct timespec *, s32 *);
+extern void __hardpps(const struct timespec *, const struct timespec *);
+#endif /* _LINUX_NTP_INTERNAL_H */

kernel/time/tick-common.c

@@ -323,6 +323,7 @@ static void tick_shutdown(unsigned int *cpup)
 		 */
 		dev->mode = CLOCK_EVT_MODE_UNUSED;
 		clockevents_exchange_device(dev, NULL);
+		dev->event_handler = clockevents_handle_noop;
 		td->evtdev = NULL;
 	}
 	raw_spin_unlock_irqrestore(&tick_device_lock, flags);
@@ -416,4 +417,5 @@ static struct notifier_block tick_notifier = {
 void __init tick_init(void)
 {
 	clockevents_register_notifier(&tick_notifier);
+	tick_broadcast_init();
 }

kernel/time/tick-internal.h

@@ -4,6 +4,8 @@
 #include <linux/hrtimer.h>
 #include <linux/tick.h>
 
+extern seqlock_t jiffies_lock;
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BUILD
 
 #define TICK_DO_TIMER_NONE	-1
@@ -94,7 +96,7 @@ extern void tick_broadcast_on_off(unsigned long reason, int *oncpu);
 extern void tick_shutdown_broadcast(unsigned int *cpup);
 extern void tick_suspend_broadcast(void);
 extern int tick_resume_broadcast(void);
-
+extern void tick_broadcast_init(void);
 extern void
 tick_set_periodic_handler(struct clock_event_device *dev, int broadcast);
 
@@ -119,6 +121,7 @@ static inline void tick_broadcast_on_off(unsigned long reason, int *oncpu) { }
 static inline void tick_shutdown_broadcast(unsigned int *cpup) { }
 static inline void tick_suspend_broadcast(void) { }
 static inline int tick_resume_broadcast(void) { return 0; }
+static inline void tick_broadcast_init(void) { }
 
 /*
  * Set the periodic handler in non broadcast mode

kernel/time/tick-sched.c

@@ -482,7 +482,7 @@ static bool can_stop_idle_tick(int cpu, struct tick_sched *ts)
 
 		if (ratelimit < 10 &&
 		    (local_softirq_pending() & SOFTIRQ_STOP_IDLE_MASK)) {
-			printk(KERN_ERR "NOHZ: local_softirq_pending %02x\n",
+			pr_warn("NOHZ: local_softirq_pending %02x\n",
 				(unsigned int) local_softirq_pending());
 			ratelimit++;
 		}

kernel/time/timer_list.c

@@ -20,6 +20,13 @@
 
 #include <asm/uaccess.h>
 
+
+struct timer_list_iter {
+	int cpu;
+	bool second_pass;
+	u64 now;
+};
+
 typedef void (*print_fn_t)(struct seq_file *m, unsigned int *classes);
 
 DECLARE_PER_CPU(struct hrtimer_cpu_base, hrtimer_bases);
@@ -133,7 +140,6 @@ static void print_cpu(struct seq_file *m, int cpu, u64 now)
 	struct hrtimer_cpu_base *cpu_base = &per_cpu(hrtimer_bases, cpu);
 	int i;
 
-	SEQ_printf(m, "\n");
 	SEQ_printf(m, "cpu: %d\n", cpu);
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++) {
 		SEQ_printf(m, " clock %d:\n", i);
@@ -187,6 +193,7 @@ static void print_cpu(struct seq_file *m, int cpu, u64 now)
 
 #undef P
 #undef P_ns
+	SEQ_printf(m, "\n");
 }
 
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
@@ -195,7 +202,6 @@ print_tickdevice(struct seq_file *m, struct tick_device *td, int cpu)
 {
 	struct clock_event_device *dev = td->evtdev;
 
-	SEQ_printf(m, "\n");
 	SEQ_printf(m, "Tick Device: mode:     %d\n", td->mode);
 	if (cpu < 0)
 		SEQ_printf(m, "Broadcast device\n");
@@ -230,12 +236,11 @@ print_tickdevice(struct seq_file *m, struct tick_device *td, int cpu)
 	print_name_offset(m, dev->event_handler);
 	SEQ_printf(m, "\n");
 	SEQ_printf(m, " retries:        %lu\n", dev->retries);
+	SEQ_printf(m, "\n");
 }
 
-static void timer_list_show_tickdevices(struct seq_file *m)
+static void timer_list_show_tickdevices_header(struct seq_file *m)
 {
-	int cpu;
-
 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 	print_tickdevice(m, tick_get_broadcast_device(), -1);
 	SEQ_printf(m, "tick_broadcast_mask: %08lx\n",
@@ -246,47 +251,104 @@ static void timer_list_show_tickdevices(struct seq_file *m)
 #endif
 	SEQ_printf(m, "\n");
 #endif
-	for_each_online_cpu(cpu)
-		print_tickdevice(m, tick_get_device(cpu), cpu);
-	SEQ_printf(m, "\n");
 }
-#else
-static void timer_list_show_tickdevices(struct seq_file *m) { }
 #endif
 
+static inline void timer_list_header(struct seq_file *m, u64 now)
+{
+	SEQ_printf(m, "Timer List Version: v0.7\n");
+	SEQ_printf(m, "HRTIMER_MAX_CLOCK_BASES: %d\n", HRTIMER_MAX_CLOCK_BASES);
+	SEQ_printf(m, "now at %Ld nsecs\n", (unsigned long long)now);
+	SEQ_printf(m, "\n");
+}
+
 static int timer_list_show(struct seq_file *m, void *v)
+{
+	struct timer_list_iter *iter = v;
+	u64 now = ktime_to_ns(ktime_get());
+
+	if (iter->cpu == -1 && !iter->second_pass)
+		timer_list_header(m, now);
+	else if (!iter->second_pass)
+		print_cpu(m, iter->cpu, iter->now);
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+	else if (iter->cpu == -1 && iter->second_pass)
+		timer_list_show_tickdevices_header(m);
+	else
+		print_tickdevice(m, tick_get_device(iter->cpu), iter->cpu);
+#endif
+	return 0;
+}
+
+void sysrq_timer_list_show(void)
 {
 	u64 now = ktime_to_ns(ktime_get());
 	int cpu;
 
-	SEQ_printf(m, "Timer List Version: v0.7\n");
-	SEQ_printf(m, "HRTIMER_MAX_CLOCK_BASES: %d\n", HRTIMER_MAX_CLOCK_BASES);
-	SEQ_printf(m, "now at %Ld nsecs\n", (unsigned long long)now);
+	timer_list_header(NULL, now);
 
 	for_each_online_cpu(cpu)
-		print_cpu(m, cpu, now);
+		print_cpu(NULL, cpu, now);
 
-	SEQ_printf(m, "\n");
-	timer_list_show_tickdevices(m);
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+	timer_list_show_tickdevices_header(NULL);
+	for_each_online_cpu(cpu)
+		print_tickdevice(NULL, tick_get_device(cpu), cpu);
+#endif
+	return;
+}
 
-	return 0;
+static void *timer_list_start(struct seq_file *file, loff_t *offset)
+{
+	struct timer_list_iter *iter = file->private;
+
+	if (!*offset) {
+		iter->cpu = -1;
+		iter->now = ktime_to_ns(ktime_get());
+	} else if (iter->cpu >= nr_cpu_ids) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+		if (!iter->second_pass) {
+			iter->cpu = -1;
+			iter->second_pass = true;
+		} else
+			return NULL;
+#else
+		return NULL;
+#endif
+	}
+	return iter;
 }
 
-void sysrq_timer_list_show(void)
+static void *timer_list_next(struct seq_file *file, void *v, loff_t *offset)
+{
+	struct timer_list_iter *iter = file->private;
+	iter->cpu = cpumask_next(iter->cpu, cpu_online_mask);
+	++*offset;
+	return timer_list_start(file, offset);
+}
+
+static void timer_list_stop(struct seq_file *seq, void *v)
 {
-	timer_list_show(NULL, NULL);
 }
 
+static const struct seq_operations timer_list_sops = {
+	.start = timer_list_start,
+	.next = timer_list_next,
+	.stop = timer_list_stop,
+	.show = timer_list_show,
+};
+
 static int timer_list_open(struct inode *inode, struct file *filp)
 {
-	return single_open(filp, timer_list_show, NULL);
+	return seq_open_private(filp, &timer_list_sops,
+			sizeof(struct timer_list_iter));
 }
 
 static const struct file_operations timer_list_fops = {
 	.open		= timer_list_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= single_release,
+	.release	= seq_release_private,
 };
 
 static int __init init_timer_list_procfs(void)