Commit abb02fdf authored by Matthew Dharm's avatar Matthew Dharm Committed by Greg Kroah-Hartman

[PATCH] USB: usb-storage: Add support for Rio Karma

This patch from Bob Copeland adds support for the Rio Karma portable
digital audio player to the usb-storage driver.  The only thing needed to
support this device is a one-time (per plugin) init command which is sent
to the device.
Signed-off-by: default avatarBob Copeland <me@bobcopeland.com>
Signed-off-by: default avatarMatthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 8e2ce4f9
......@@ -45,6 +45,12 @@
#include "debug.h"
#include "transport.h"
#define RIO_MSC 0x08
#define RIOP_INIT "RIOP\x00\x01\x08"
#define RIOP_INIT_LEN 7
#define RIO_SEND_LEN 40
#define RIO_RECV_LEN 0x200
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us)
......@@ -91,3 +97,70 @@ int usb_stor_ucr61s2b_init(struct us_data *us)
return (res ? -1 : 0);
}
/* Place the Rio Karma into mass storage mode.
*
* The initialization begins by sending 40 bytes starting
* RIOP\x00\x01\x08\x00, which the device will ack with a 512-byte
* packet with the high four bits set and everything else null.
*
* Next, we send RIOP\x80\x00\x08\x00. Each time, a 512 byte response
* must be read, but we must loop until byte 5 in the response is 0x08,
* indicating success. */
int rio_karma_init(struct us_data *us)
{
int result, partial;
char *recv;
unsigned long timeout;
// us->iobuf is big enough to hold cmd but not receive
if (!(recv = kmalloc(RIO_RECV_LEN, GFP_KERNEL)))
goto die_nomem;
US_DEBUGP("Initializing Karma...\n");
memset(us->iobuf, 0, RIO_SEND_LEN);
memcpy(us->iobuf, RIOP_INIT, RIOP_INIT_LEN);
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
us->iobuf, RIO_SEND_LEN, &partial);
if (result != USB_STOR_XFER_GOOD)
goto die;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
recv, RIO_RECV_LEN, &partial);
if (result != USB_STOR_XFER_GOOD)
goto die;
us->iobuf[4] = 0x80;
us->iobuf[5] = 0;
timeout = jiffies + msecs_to_jiffies(3000);
for (;;) {
US_DEBUGP("Sending init command\n");
result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
us->iobuf, RIO_SEND_LEN, &partial);
if (result != USB_STOR_XFER_GOOD)
goto die;
result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
recv, RIO_RECV_LEN, &partial);
if (result != USB_STOR_XFER_GOOD)
goto die;
if (recv[5] == RIO_MSC)
break;
if (time_after(jiffies, timeout))
goto die;
msleep(10);
}
US_DEBUGP("Karma initialized.\n");
kfree(recv);
return 0;
die:
kfree(recv);
die_nomem:
US_DEBUGP("Could not initialize karma.\n");
return USB_STOR_TRANSPORT_FAILED;
}
......@@ -48,3 +48,4 @@ int usb_stor_euscsi_init(struct us_data *us);
/* This function is required to activate all four slots on the UCR-61S2B
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
int rio_karma_init(struct us_data *us);
......@@ -145,6 +145,11 @@ UNUSUAL_DEV( 0x0451, 0x5416, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101,
"Rio",
"Rio Karma",
US_SC_SCSI, US_PR_BULK, rio_karma_init, 0),
/* Patch submitted by Philipp Friedrich <philipp@void.at> */
UNUSUAL_DEV( 0x0482, 0x0100, 0x0100, 0x0100,
"Kyocera",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment