Commit acc468f5 authored by John W. Linville's avatar John W. Linville

Merge branch 'master' of...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into for-davem
parents 5c18e80b 9935d126
......@@ -1624,6 +1624,16 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev,
pci_read_config_byte(pdev, 0x8, &revisionid);
pci_read_config_word(pdev, 0x3C, &irqline);
/* PCI ID 0x10ec:0x8192 occurs for both RTL8192E, which uses
* r8192e_pci, and RTL8192SE, which uses this driver. If the
* revision ID is RTL_PCI_REVISION_ID_8192PCIE (0x01), then
* the correct driver is r8192e_pci, thus this routine should
* return false.
*/
if (deviceid == RTL_PCI_8192SE_DID &&
revisionid == RTL_PCI_REVISION_ID_8192PCIE)
return false;
if (deviceid == RTL_PCI_8192_DID ||
deviceid == RTL_PCI_0044_DID ||
deviceid == RTL_PCI_0047_DID ||
......@@ -1856,7 +1866,8 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev,
pci_write_config_byte(pdev, 0x04, 0x07);
/* find adapter */
_rtl_pci_find_adapter(pdev, hw);
if (!_rtl_pci_find_adapter(pdev, hw))
goto fail3;
/* Init IO handler */
_rtl_pci_io_handler_init(&pdev->dev, hw);
......
......@@ -53,6 +53,8 @@ MODULE_FIRMWARE("rtlwifi/rtl8192cufw.bin");
static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
const struct firmware *firmware;
int err;
rtlpriv->dm.dm_initialgain_enable = 1;
rtlpriv->dm.dm_flag = 0;
......@@ -64,6 +66,24 @@ static int rtl92cu_init_sw_vars(struct ieee80211_hw *hw)
("Can't alloc buffer for fw.\n"));
return 1;
}
/* request fw */
err = request_firmware(&firmware, rtlpriv->cfg->fw_name,
rtlpriv->io.dev);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Failed to request firmware!\n"));
return 1;
}
if (firmware->size > 0x4000) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
("Firmware is too big!\n"));
release_firmware(firmware);
return 1;
}
memcpy(rtlpriv->rtlhal.pfirmware, firmware->data, firmware->size);
rtlpriv->rtlhal.fwsize = firmware->size;
release_firmware(firmware);
return 0;
}
......
......@@ -608,10 +608,10 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
goto encrypt;
auth:
if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend))
return 0;
hci_conn_auth(conn, sec_level, auth_type);
if (!hci_conn_auth(conn, sec_level, auth_type))
return 0;
encrypt:
......
......@@ -4002,21 +4002,30 @@ static int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
}
} else if (sk->sk_state == BT_CONNECT2) {
struct l2cap_conn_rsp rsp;
__u16 result;
__u16 res, stat;
if (!status) {
if (bt_sk(sk)->defer_setup) {
struct sock *parent = bt_sk(sk)->parent;
res = L2CAP_CR_PEND;
stat = L2CAP_CS_AUTHOR_PEND;
parent->sk_data_ready(parent, 0);
} else {
sk->sk_state = BT_CONFIG;
result = L2CAP_CR_SUCCESS;
res = L2CAP_CR_SUCCESS;
stat = L2CAP_CS_NO_INFO;
}
} else {
sk->sk_state = BT_DISCONN;
l2cap_sock_set_timer(sk, HZ / 10);
result = L2CAP_CR_SEC_BLOCK;
res = L2CAP_CR_SEC_BLOCK;
stat = L2CAP_CS_NO_INFO;
}
rsp.scid = cpu_to_le16(chan->dcid);
rsp.dcid = cpu_to_le16(chan->scid);
rsp.result = cpu_to_le16(result);
rsp.status = cpu_to_le16(L2CAP_CS_NO_INFO);
rsp.result = cpu_to_le16(res);
rsp.status = cpu_to_le16(stat);
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
sizeof(rsp), &rsp);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment