Commit ae02ab00 authored by Alex Smith's avatar Alex Smith Committed by Brian Norris

mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs

Add a driver for NAND devices connected to the NEMC on JZ4780 SoCs, as
well as the hardware BCH controller. DMA is not currently implemented.

While older 47xx SoCs also have a BCH controller, they are incompatible
with the one in the 4780 due to differing register/bit positions, which
would make implementing a common driver for them quite messy.
Signed-off-by: default avatarAlex Smith <alex.smith@imgtec.com>
Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: default avatarHarvey Hunt <harvey.hunt@imgtec.com>
Reviewed-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
[Brian: fixed a few small mistakes]
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
parent 48bf35de
...@@ -519,6 +519,13 @@ config MTD_NAND_JZ4740 ...@@ -519,6 +519,13 @@ config MTD_NAND_JZ4740
help help
Enables support for NAND Flash on JZ4740 SoC based boards. Enables support for NAND Flash on JZ4740 SoC based boards.
config MTD_NAND_JZ4780
tristate "Support for NAND on JZ4780 SoC"
depends on MACH_JZ4780 && JZ4780_NEMC
help
Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
based boards, using the BCH controller for hardware error correction.
config MTD_NAND_FSMC config MTD_NAND_FSMC
tristate "Support for NAND on ST Micros FSMC" tristate "Support for NAND on ST Micros FSMC"
depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300 depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
......
...@@ -49,6 +49,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o ...@@ -49,6 +49,7 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
obj-$(CONFIG_MTD_NAND_RICOH) += r852.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
obj-$(CONFIG_MTD_NAND_JZ4780) += jz4780_nand.o jz4780_bch.o
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
......
/*
* JZ4780 BCH controller
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include "jz4780_bch.h"
#define BCH_BHCR 0x0
#define BCH_BHCCR 0x8
#define BCH_BHCNT 0xc
#define BCH_BHDR 0x10
#define BCH_BHPAR0 0x14
#define BCH_BHERR0 0x84
#define BCH_BHINT 0x184
#define BCH_BHINTES 0x188
#define BCH_BHINTEC 0x18c
#define BCH_BHINTE 0x190
#define BCH_BHCR_BSEL_SHIFT 4
#define BCH_BHCR_BSEL_MASK (0x7f << BCH_BHCR_BSEL_SHIFT)
#define BCH_BHCR_ENCE BIT(2)
#define BCH_BHCR_INIT BIT(1)
#define BCH_BHCR_BCHE BIT(0)
#define BCH_BHCNT_PARITYSIZE_SHIFT 16
#define BCH_BHCNT_PARITYSIZE_MASK (0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
#define BCH_BHCNT_BLOCKSIZE_SHIFT 0
#define BCH_BHCNT_BLOCKSIZE_MASK (0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
#define BCH_BHERR_MASK_SHIFT 16
#define BCH_BHERR_MASK_MASK (0xffff << BCH_BHERR_MASK_SHIFT)
#define BCH_BHERR_INDEX_SHIFT 0
#define BCH_BHERR_INDEX_MASK (0x7ff << BCH_BHERR_INDEX_SHIFT)
#define BCH_BHINT_ERRC_SHIFT 24
#define BCH_BHINT_ERRC_MASK (0x7f << BCH_BHINT_ERRC_SHIFT)
#define BCH_BHINT_TERRC_SHIFT 16
#define BCH_BHINT_TERRC_MASK (0x7f << BCH_BHINT_TERRC_SHIFT)
#define BCH_BHINT_DECF BIT(3)
#define BCH_BHINT_ENCF BIT(2)
#define BCH_BHINT_UNCOR BIT(1)
#define BCH_BHINT_ERR BIT(0)
#define BCH_CLK_RATE (200 * 1000 * 1000)
/* Timeout for BCH calculation/correction. */
#define BCH_TIMEOUT_US 100000
struct jz4780_bch {
struct device *dev;
void __iomem *base;
struct clk *clk;
struct mutex lock;
};
static void jz4780_bch_init(struct jz4780_bch *bch,
struct jz4780_bch_params *params, bool encode)
{
u32 reg;
/* Clear interrupt status. */
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
/* Set up BCH count register. */
reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
writel(reg, bch->base + BCH_BHCNT);
/* Initialise and enable BCH. */
reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
if (encode)
reg |= BCH_BHCR_ENCE;
writel(reg, bch->base + BCH_BHCR);
}
static void jz4780_bch_disable(struct jz4780_bch *bch)
{
writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
}
static void jz4780_bch_write_data(struct jz4780_bch *bch, const void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
size_t size8 = size % sizeof(u32);
const u32 *src32;
const u8 *src8;
src32 = (const u32 *)buf;
while (size32--)
writel(*src32++, bch->base + BCH_BHDR);
src8 = (const u8 *)src32;
while (size8--)
writeb(*src8++, bch->base + BCH_BHDR);
}
static void jz4780_bch_read_parity(struct jz4780_bch *bch, void *buf,
size_t size)
{
size_t size32 = size / sizeof(u32);
size_t size8 = size % sizeof(u32);
u32 *dest32;
u8 *dest8;
u32 val, offset = 0;
dest32 = (u32 *)buf;
while (size32--) {
*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
offset += sizeof(u32);
}
dest8 = (u8 *)dest32;
val = readl(bch->base + BCH_BHPAR0 + offset);
switch (size8) {
case 3:
dest8[2] = (val >> 16) & 0xff;
case 2:
dest8[1] = (val >> 8) & 0xff;
case 1:
dest8[0] = val & 0xff;
break;
}
}
static bool jz4780_bch_wait_complete(struct jz4780_bch *bch, unsigned int irq,
u32 *status)
{
u32 reg;
int ret;
/*
* While we could use interrupts here and sleep until the operation
* completes, the controller works fairly quickly (usually a few
* microseconds) and so the overhead of sleeping until we get an
* interrupt quite noticeably decreases performance.
*/
ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
(reg & irq) == irq, 0, BCH_TIMEOUT_US);
if (ret)
return false;
if (status)
*status = reg;
writel(reg, bch->base + BCH_BHINT);
return true;
}
/**
* jz4780_bch_calculate() - calculate ECC for a data buffer
* @bch: BCH device.
* @params: BCH parameters.
* @buf: input buffer with raw data.
* @ecc_code: output buffer with ECC.
*
* Return: 0 on success, -ETIMEDOUT if timed out while waiting for BCH
* controller.
*/
int jz4780_bch_calculate(struct jz4780_bch *bch, struct jz4780_bch_params *params,
const u8 *buf, u8 *ecc_code)
{
int ret = 0;
mutex_lock(&bch->lock);
jz4780_bch_init(bch, params, true);
jz4780_bch_write_data(bch, buf, params->size);
if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
jz4780_bch_read_parity(bch, ecc_code, params->bytes);
} else {
dev_err(bch->dev, "timed out while calculating ECC\n");
ret = -ETIMEDOUT;
}
jz4780_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
EXPORT_SYMBOL(jz4780_bch_calculate);
/**
* jz4780_bch_correct() - detect and correct bit errors
* @bch: BCH device.
* @params: BCH parameters.
* @buf: raw data read from the chip.
* @ecc_code: ECC read from the chip.
*
* Given the raw data and the ECC read from the NAND device, detects and
* corrects errors in the data.
*
* Return: the number of bit errors corrected, or -1 if there are too many
* errors to correct or we timed out waiting for the controller.
*/
int jz4780_bch_correct(struct jz4780_bch *bch, struct jz4780_bch_params *params,
u8 *buf, u8 *ecc_code)
{
u32 reg, mask, index;
int i, ret, count;
mutex_lock(&bch->lock);
jz4780_bch_init(bch, params, false);
jz4780_bch_write_data(bch, buf, params->size);
jz4780_bch_write_data(bch, ecc_code, params->bytes);
if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
dev_err(bch->dev, "timed out while correcting data\n");
ret = -1;
goto out;
}
if (reg & BCH_BHINT_UNCOR) {
dev_warn(bch->dev, "uncorrectable ECC error\n");
ret = -1;
goto out;
}
/* Correct any detected errors. */
if (reg & BCH_BHINT_ERR) {
count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
for (i = 0; i < count; i++) {
reg = readl(bch->base + BCH_BHERR0 + (i * 4));
mask = (reg & BCH_BHERR_MASK_MASK) >>
BCH_BHERR_MASK_SHIFT;
index = (reg & BCH_BHERR_INDEX_MASK) >>
BCH_BHERR_INDEX_SHIFT;
buf[(index * 2) + 0] ^= mask;
buf[(index * 2) + 1] ^= mask >> 8;
}
} else {
ret = 0;
}
out:
jz4780_bch_disable(bch);
mutex_unlock(&bch->lock);
return ret;
}
EXPORT_SYMBOL(jz4780_bch_correct);
/**
* jz4780_bch_get() - get the BCH controller device
* @np: BCH device tree node.
*
* Gets the BCH controller device from the specified device tree node. The
* device must be released with jz4780_bch_release() when it is no longer being
* used.
*
* Return: a pointer to jz4780_bch, errors are encoded into the pointer.
* PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
*/
static struct jz4780_bch *jz4780_bch_get(struct device_node *np)
{
struct platform_device *pdev;
struct jz4780_bch *bch;
pdev = of_find_device_by_node(np);
if (!pdev || !platform_get_drvdata(pdev))
return ERR_PTR(-EPROBE_DEFER);
get_device(&pdev->dev);
bch = platform_get_drvdata(pdev);
clk_prepare_enable(bch->clk);
bch->dev = &pdev->dev;
return bch;
}
/**
* of_jz4780_bch_get() - get the BCH controller from a DT node
* @of_node: the node that contains a bch-controller property.
*
* Get the bch-controller property from the given device tree
* node and pass it to jz4780_bch_get to do the work.
*
* Return: a pointer to jz4780_bch, errors are encoded into the pointer.
* PTR_ERR(-EPROBE_DEFER) if the device hasn't been initialised yet.
*/
struct jz4780_bch *of_jz4780_bch_get(struct device_node *of_node)
{
struct jz4780_bch *bch = NULL;
struct device_node *np;
np = of_parse_phandle(of_node, "ingenic,bch-controller", 0);
if (np) {
bch = jz4780_bch_get(np);
of_node_put(np);
}
return bch;
}
EXPORT_SYMBOL(of_jz4780_bch_get);
/**
* jz4780_bch_release() - release the BCH controller device
* @bch: BCH device.
*/
void jz4780_bch_release(struct jz4780_bch *bch)
{
clk_disable_unprepare(bch->clk);
put_device(bch->dev);
}
EXPORT_SYMBOL(jz4780_bch_release);
static int jz4780_bch_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct jz4780_bch *bch;
struct resource *res;
bch = devm_kzalloc(dev, sizeof(*bch), GFP_KERNEL);
if (!bch)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
bch->base = devm_ioremap_resource(dev, res);
if (IS_ERR(bch->base))
return PTR_ERR(bch->base);
jz4780_bch_disable(bch);
bch->clk = devm_clk_get(dev, NULL);
if (IS_ERR(bch->clk)) {
dev_err(dev, "failed to get clock: %ld\n", PTR_ERR(bch->clk));
return PTR_ERR(bch->clk);
}
clk_set_rate(bch->clk, BCH_CLK_RATE);
mutex_init(&bch->lock);
bch->dev = dev;
platform_set_drvdata(pdev, bch);
return 0;
}
static const struct of_device_id jz4780_bch_dt_match[] = {
{ .compatible = "ingenic,jz4780-bch" },
{},
};
MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
static struct platform_driver jz4780_bch_driver = {
.probe = jz4780_bch_probe,
.driver = {
.name = "jz4780-bch",
.of_match_table = of_match_ptr(jz4780_bch_dt_match),
},
};
module_platform_driver(jz4780_bch_driver);
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
MODULE_LICENSE("GPL v2");
/*
* JZ4780 BCH controller
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#ifndef __DRIVERS_MTD_NAND_JZ4780_BCH_H__
#define __DRIVERS_MTD_NAND_JZ4780_BCH_H__
#include <linux/types.h>
struct device;
struct device_node;
struct jz4780_bch;
/**
* struct jz4780_bch_params - BCH parameters
* @size: data bytes per ECC step.
* @bytes: ECC bytes per step.
* @strength: number of correctable bits per ECC step.
*/
struct jz4780_bch_params {
int size;
int bytes;
int strength;
};
int jz4780_bch_calculate(struct jz4780_bch *bch,
struct jz4780_bch_params *params,
const u8 *buf, u8 *ecc_code);
int jz4780_bch_correct(struct jz4780_bch *bch,
struct jz4780_bch_params *params, u8 *buf,
u8 *ecc_code);
void jz4780_bch_release(struct jz4780_bch *bch);
struct jz4780_bch *of_jz4780_bch_get(struct device_node *np);
#endif /* __DRIVERS_MTD_NAND_JZ4780_BCH_H__ */
/*
* JZ4780 NAND driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Alex Smith <alex.smith@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/gpio/consumer.h>
#include <linux/of_mtd.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/jz4780-nemc.h>
#include "jz4780_bch.h"
#define DRV_NAME "jz4780-nand"
#define OFFSET_DATA 0x00000000
#define OFFSET_CMD 0x00400000
#define OFFSET_ADDR 0x00800000
/* Command delay when there is no R/B pin. */
#define RB_DELAY_US 100
struct jz4780_nand_cs {
unsigned int bank;
void __iomem *base;
};
struct jz4780_nand_controller {
struct device *dev;
struct jz4780_bch *bch;
struct nand_hw_control controller;
unsigned int num_banks;
struct list_head chips;
int selected;
struct jz4780_nand_cs cs[];
};
struct jz4780_nand_chip {
struct nand_chip chip;
struct list_head chip_list;
struct nand_ecclayout ecclayout;
struct gpio_desc *busy_gpio;
struct gpio_desc *wp_gpio;
unsigned int reading: 1;
};
static inline struct jz4780_nand_chip *to_jz4780_nand_chip(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct jz4780_nand_chip, chip);
}
static inline struct jz4780_nand_controller *to_jz4780_nand_controller(struct nand_hw_control *ctrl)
{
return container_of(ctrl, struct jz4780_nand_controller, controller);
}
static void jz4780_nand_select_chip(struct mtd_info *mtd, int chipnr)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_nand_cs *cs;
/* Ensure the currently selected chip is deasserted. */
if (chipnr == -1 && nfc->selected >= 0) {
cs = &nfc->cs[nfc->selected];
jz4780_nemc_assert(nfc->dev, cs->bank, false);
}
nfc->selected = chipnr;
}
static void jz4780_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_nand_cs *cs;
if (WARN_ON(nfc->selected < 0))
return;
cs = &nfc->cs[nfc->selected];
jz4780_nemc_assert(nfc->dev, cs->bank, ctrl & NAND_NCE);
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_ALE)
writeb(cmd, cs->base + OFFSET_ADDR);
else if (ctrl & NAND_CLE)
writeb(cmd, cs->base + OFFSET_CMD);
}
static int jz4780_nand_dev_ready(struct mtd_info *mtd)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
return !gpiod_get_value_cansleep(nand->busy_gpio);
}
static void jz4780_nand_ecc_hwctl(struct mtd_info *mtd, int mode)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
nand->reading = (mode == NAND_ECC_READ);
}
static int jz4780_nand_ecc_calculate(struct mtd_info *mtd, const u8 *dat,
u8 *ecc_code)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_bch_params params;
/*
* Don't need to generate the ECC when reading, BCH does it for us as
* part of decoding/correction.
*/
if (nand->reading)
return 0;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return jz4780_bch_calculate(nfc->bch, &params, dat, ecc_code);
}
static int jz4780_nand_ecc_correct(struct mtd_info *mtd, u8 *dat,
u8 *read_ecc, u8 *calc_ecc)
{
struct jz4780_nand_chip *nand = to_jz4780_nand_chip(mtd);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(nand->chip.controller);
struct jz4780_bch_params params;
params.size = nand->chip.ecc.size;
params.bytes = nand->chip.ecc.bytes;
params.strength = nand->chip.ecc.strength;
return jz4780_bch_correct(nfc->bch, &params, dat, read_ecc);
}
static int jz4780_nand_init_ecc(struct jz4780_nand_chip *nand, struct device *dev)
{
struct nand_chip *chip = &nand->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct jz4780_nand_controller *nfc = to_jz4780_nand_controller(chip->controller);
struct nand_ecclayout *layout = &nand->ecclayout;
u32 start, i;
chip->ecc.bytes = fls((1 + 8) * chip->ecc.size) *
(chip->ecc.strength / 8);
if (nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
chip->ecc.hwctl = jz4780_nand_ecc_hwctl;
chip->ecc.calculate = jz4780_nand_ecc_calculate;
chip->ecc.correct = jz4780_nand_ecc_correct;
} else if (!nfc->bch && chip->ecc.mode == NAND_ECC_HW) {
dev_err(dev, "HW BCH selected, but BCH controller not found\n");
return -ENODEV;
}
if (chip->ecc.mode == NAND_ECC_HW_SYNDROME) {
dev_err(dev, "ECC HW syndrome not supported\n");
return -EINVAL;
}
if (chip->ecc.mode != NAND_ECC_NONE)
dev_info(dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->bch) ? "hardware BCH" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
else
dev_info(dev, "not using ECC\n");
/* The NAND core will generate the ECC layout. */
if (chip->ecc.mode == NAND_ECC_SOFT || chip->ecc.mode == NAND_ECC_SOFT_BCH)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
layout->eccbytes = mtd->writesize / chip->ecc.size * chip->ecc.bytes;
if (layout->eccbytes > mtd->oobsize - 2) {
dev_err(dev,
"invalid ECC config: required %d ECC bytes, but only %d are available",
layout->eccbytes, mtd->oobsize - 2);
return -EINVAL;
}
start = mtd->oobsize - layout->eccbytes;
for (i = 0; i < layout->eccbytes; i++)
layout->eccpos[i] = start + i;
layout->oobfree[0].offset = 2;
layout->oobfree[0].length = mtd->oobsize - layout->eccbytes - 2;
chip->ecc.layout = layout;
return 0;
}
static int jz4780_nand_init_chip(struct platform_device *pdev,
struct jz4780_nand_controller *nfc,
struct device_node *np,
unsigned int chipnr)
{
struct device *dev = &pdev->dev;
struct jz4780_nand_chip *nand;
struct jz4780_nand_cs *cs;
struct resource *res;
struct nand_chip *chip;
struct mtd_info *mtd;
const __be32 *reg;
int ret = 0;
cs = &nfc->cs[chipnr];
reg = of_get_property(np, "reg", NULL);
if (!reg)
return -EINVAL;
cs->bank = be32_to_cpu(*reg);
jz4780_nemc_set_type(nfc->dev, cs->bank, JZ4780_NEMC_BANK_NAND);
res = platform_get_resource(pdev, IORESOURCE_MEM, chipnr);
cs->base = devm_ioremap_resource(dev, res);
if (IS_ERR(cs->base))
return PTR_ERR(cs->base);
nand = devm_kzalloc(dev, sizeof(*nand), GFP_KERNEL);
if (!nand)
return -ENOMEM;
nand->busy_gpio = devm_gpiod_get_optional(dev, "rb", GPIOD_IN);
if (IS_ERR(nand->busy_gpio)) {
ret = PTR_ERR(nand->busy_gpio);
dev_err(dev, "failed to request busy GPIO: %d\n", ret);
return ret;
} else if (nand->busy_gpio) {
nand->chip.dev_ready = jz4780_nand_dev_ready;
}
nand->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_LOW);
if (IS_ERR(nand->wp_gpio)) {
ret = PTR_ERR(nand->wp_gpio);
dev_err(dev, "failed to request WP GPIO: %d\n", ret);
return ret;
}
chip = &nand->chip;
mtd = nand_to_mtd(chip);
mtd->priv = chip;
mtd->name = devm_kasprintf(dev, GFP_KERNEL, "%s.%d", dev_name(dev),
cs->bank);
if (!mtd->name)
return -ENOMEM;
mtd->dev.parent = dev;
chip->IO_ADDR_R = cs->base + OFFSET_DATA;
chip->IO_ADDR_W = cs->base + OFFSET_DATA;
chip->chip_delay = RB_DELAY_US;
chip->options = NAND_NO_SUBPAGE_WRITE;
chip->select_chip = jz4780_nand_select_chip;
chip->cmd_ctrl = jz4780_nand_cmd_ctrl;
chip->ecc.mode = NAND_ECC_HW;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
ret = nand_scan_ident(mtd, 1, NULL);
if (ret)
return ret;
ret = jz4780_nand_init_ecc(nand, dev);
if (ret)
return ret;
ret = nand_scan_tail(mtd);
if (ret)
return ret;
ret = mtd_device_register(mtd, NULL, 0);
if (ret) {
nand_release(mtd);
return ret;
}
list_add_tail(&nand->chip_list, &nfc->chips);
return 0;
}
static void jz4780_nand_cleanup_chips(struct jz4780_nand_controller *nfc)
{
struct jz4780_nand_chip *chip;
while (!list_empty(&nfc->chips)) {
chip = list_first_entry(&nfc->chips, struct jz4780_nand_chip, chip_list);
nand_release(nand_to_mtd(&chip->chip));
list_del(&chip->chip_list);
}
}
static int jz4780_nand_init_chips(struct jz4780_nand_controller *nfc,
struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np;
int i = 0;
int ret;
int num_chips = of_get_child_count(dev->of_node);
if (num_chips > nfc->num_banks) {
dev_err(dev, "found %d chips but only %d banks\n", num_chips, nfc->num_banks);
return -EINVAL;
}
for_each_child_of_node(dev->of_node, np) {
ret = jz4780_nand_init_chip(pdev, nfc, np, i);
if (ret) {
jz4780_nand_cleanup_chips(nfc);
return ret;
}
i++;
}
return 0;
}
static int jz4780_nand_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
unsigned int num_banks;
struct jz4780_nand_controller *nfc;
int ret;
num_banks = jz4780_nemc_num_banks(dev);
if (num_banks == 0) {
dev_err(dev, "no banks found\n");
return -ENODEV;
}
nfc = devm_kzalloc(dev, sizeof(*nfc) + (sizeof(nfc->cs[0]) * num_banks), GFP_KERNEL);
if (!nfc)
return -ENOMEM;
/*
* Check for BCH HW before we call nand_scan_ident, to prevent us from
* having to call it again if the BCH driver returns -EPROBE_DEFER.
*/
nfc->bch = of_jz4780_bch_get(dev->of_node);
if (IS_ERR(nfc->bch))
return PTR_ERR(nfc->bch);
nfc->dev = dev;
nfc->num_banks = num_banks;
spin_lock_init(&nfc->controller.lock);
INIT_LIST_HEAD(&nfc->chips);
init_waitqueue_head(&nfc->controller.wq);
ret = jz4780_nand_init_chips(nfc, pdev);
if (ret) {
if (nfc->bch)
jz4780_bch_release(nfc->bch);
return ret;
}
platform_set_drvdata(pdev, nfc);
return 0;
}
static int jz4780_nand_remove(struct platform_device *pdev)
{
struct jz4780_nand_controller *nfc = platform_get_drvdata(pdev);
if (nfc->bch)
jz4780_bch_release(nfc->bch);
jz4780_nand_cleanup_chips(nfc);
return 0;
}
static const struct of_device_id jz4780_nand_dt_match[] = {
{ .compatible = "ingenic,jz4780-nand" },
{},
};
MODULE_DEVICE_TABLE(of, jz4780_nand_dt_match);
static struct platform_driver jz4780_nand_driver = {
.probe = jz4780_nand_probe,
.remove = jz4780_nand_remove,
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(jz4780_nand_dt_match),
},
};
module_platform_driver(jz4780_nand_driver);
MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
MODULE_LICENSE("GPL v2");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment