Merge tag 'qcom-dts-for-4.17' of...

Merge tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt

Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross:

* Add initial DTS file for Samsung Galaxy S5
* Fixups for castor touchscreen node
* Fixup QS600 at23 manufacturer
* Add XOADC and IIO to APQ8064

* tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen node
  ARM: dts: add XOADC and IIO HWMON to APQ8064
  ARM: dts: use 'atmel' as at24 manufacturer for qcom-apq8064-cm-qs600
  ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone

arch/arm/boot/dts/Makefile

@@ -765,6 +765,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-fairphone-fp2.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-samsung-klte.dtb \
 	qcom-msm8974-sony-xperia-castor.dtb \
 	qcom-msm8974-sony-xperia-honami.dtb \
 	qcom-mdm9615-wp8548-mangoh-green.dtb

arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts

@@ -133,7 +133,7 @@ i2c@12460000 {
 				clock-frequency = <200000>;
 
 				eeprom@50 {
-					compatible = "24c02";
+					compatible = "atmel,24c02";
 					reg = <0x50>;
 					pagesize = <32>;
 				};

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -316,6 +316,23 @@ scm {
 		};
 	};
 
+
+	/*
+	 * These channels from the ADC are simply hardware monitors.
+	 * That is why the ADC is referred to as "HKADC" - HouseKeeping
+	 * ADC.
+	 */
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&xoadc 0x00 0x01>, /* Battery */
+			    <&xoadc 0x00 0x02>, /* DC in (charger) */
+			    <&xoadc 0x00 0x04>, /* VPH the main system voltage */
+			    <&xoadc 0x00 0x0b>, /* Die temperature */
+			    <&xoadc 0x00 0x0c>, /* Reference voltage 1.25V */
+			    <&xoadc 0x00 0x0d>, /* Reference voltage 0.625V */
+			    <&xoadc 0x00 0x0e>; /* Charger temperature */
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -770,6 +787,52 @@ pwrkey@1c {
 					debounce = <15625>;
 					pull-up;
 				};
+
+				xoadc: xoadc@197 {
+					compatible = "qcom,pm8921-adc";
+					reg = <197>;
+					interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>;
+					#address-cells = <2>;
+					#size-cells = <0>;
+					#io-channel-cells = <2>;
+
+					vcoin: adc-channel@00 {
+						reg = <0x00 0x00>;
+					};
+					vbat: adc-channel@01 {
+						reg = <0x00 0x01>;
+					};
+					dcin: adc-channel@02 {
+						reg = <0x00 0x02>;
+					};
+					vph_pwr: adc-channel@04 {
+						reg = <0x00 0x04>;
+					};
+					batt_therm: adc-channel@08 {
+						reg = <0x00 0x08>;
+					};
+					batt_id: adc-channel@09 {
+						reg = <0x00 0x09>;
+					};
+					usb_vbus: adc-channel@0a {
+						reg = <0x00 0x0a>;
+					};
+					die_temp: adc-channel@0b {
+						reg = <0x00 0x0b>;
+					};
+					ref_625mv: adc-channel@0c {
+						reg = <0x00 0x0c>;
+					};
+					ref_1250mv: adc-channel@0d {
+						reg = <0x00 0x0d>;
+					};
+					chg_temp: adc-channel@0e {
+						reg = <0x00 0x0e>;
+					};
+					ref_muxoff: adc-channel@0f {
+						reg = <0x00 0x0f>;
+					};
+				};
 			};
 		};
 

arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts

+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro.dtsi"
+#include "qcom-pm8841.dtsi"
+#include "qcom-pm8941.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5";
+	compatible = "samsung,klte", "qcom,msm8974";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&soc {
+	serial@f991e000 {
+		status = "ok";
+	};
+
+};

arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts

@@ -491,7 +491,7 @@ i2c@f9964000 {
 		pinctrl-0 = <&i2c8_pins>;
 
 		synaptics@2c {
-			compatible = "syna,rmi-i2c";
+			compatible = "syna,rmi4-i2c";
 			reg = <0x2c>;
 
 			interrupt-parent = <&msmgpio>;
@@ -506,6 +506,8 @@ synaptics@2c {
 			pinctrl-names = "default";
 			pinctrl-0 = <&ts_int_pin>;
 
+			syna,startup-delay-ms = <10>;
+
 			rmi-f01@1 {
 				reg = <0x1>;
 				syna,nosleep = <1>;