Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:

 - updated support for Synaptics RMI4 devices, including support for
   SMBus controllers, firmware update support, sensor tuning, and PS/2
   guest support

 - ALPS driver now supports tracksticks on SS5 controllers

 - i8042 now uses chassis info to skip selftest on Asus laptops as list
   of individual models became too unwieldy

 - miscellaneous fixes to other drivers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (67 commits)
  Input: imx6ul_tsc - generalize the averaging property
  Input: drv260x - use generic device properties
  Input: drv260x - use temporary for &client->dev
  Input: drv260x - fix input device's parent assignment
  Input: synaptics-rmi4 - add support for F34 V7 bootloader
  Input: drv260x - fix initializing overdrive voltage
  Input: ALPS - fix protcol -> protocol
  Input: i8042 - comment #else/#endif of CONFIG_PNP
  Input: lpc32xx-keys - fix invalid error handling of a requested irq
  Input: synaptics-rmi4 - fix debug for sensor clip
  Input: synaptics-rmi4 - store the attn data in the driver
  Input: synaptics-rmi4 - allow to add attention data
  Input: synaptics-rmi4 - f03 - grab data passed by transport device
  Input: synaptics-rmi4 - add support for F03
  Input: imx6ul_tsc - convert int to u32
  Input: imx6ul_tsc - add mask when set REG_ADC_CFG
  Input: synaptics-rmi4 - have only one struct platform data
  Input: synaptics-rmi4 - remove EXPORT_SYMBOL_GPL for internal functions
  Input: synaptics-rmi4 - remove mutex calls while updating the firmware
  Input: drv2667 - fix misuse of regmap_update_bits
  ...

Documentation/devicetree/bindings/input/da9062-onkey.txt

-* Dialog DA9062/63 OnKey Module
+* Dialog DA9061/62/63 OnKey Module
 
-This module is part of the DA9062/DA9063. For more details about entire
-chips see Documentation/devicetree/bindings/mfd/da9062.txt and
-Documentation/devicetree/bindings/mfd/da9063.txt
+This module is part of the DA9061/DA9062/DA9063. For more details about entire
+DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt
+For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt
 
-This module provides KEY_POWER, KEY_SLEEP and events.
+This module provides the KEY_POWER event.
 
 Required properties:
 
-- compatible: should be one of:
-	dlg,da9062-onkey
-	dlg,da9063-onkey
+- compatible: should be one of the following valid compatible string lines:
+	"dlg,da9061-onkey", "dlg,da9062-onkey"
+	"dlg,da9062-onkey"
+	"dlg,da9063-onkey"
 
 Optional properties:
 
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
+- dlg,disable-key-power : Disable power-down using a long key-press. If this
     entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
+    press when triggered using a long press of the OnKey.
 
-Example:
-
-	pmic0: da9062@58 {
+Example: DA9063
 
+	pmic0: da9063@58 {
 		onkey {
 			compatible = "dlg,da9063-onkey";
 			dlg,disable-key-power;
 		};
+	};
+
+Example: DA9062
+
+	pmic0: da9062@58 {
+		onkey {
+			compatible = "dlg,da9062-onkey";
+			dlg,disable-key-power;
+		};
+	};
+
+Example: DA9061 using a fall-back compatible for the DA9062 onkey driver
 
+	pmic0: da9061@58 {
+		onkey {
+			compatible = "dlg,da9061-onkey", "dlg,da9062-onkey";
+			dlg,disable-key-power;
+		};
 	};

Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt

@@ -17,6 +17,8 @@ Optional properties:
   This value depends on the touch screen.
 - pre-charge-time: the touch screen need some time to precharge.
   This value depends on the touch screen.
+- touchscreen-average-samples: Number of data samples which are averaged for
+  each read. Valid values are 1, 4, 8, 16 and 32.
 
 Example:
 	tsc: tsc@02040000 {
@@ -32,5 +34,6 @@ Example:
 		xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
 		measure-delay-time = <0xfff>;
 		pre-charge-time = <0xffff>;
+		touchscreen-average-samples = <32>;
 		status = "okay";
 	};

Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt

@@ -18,6 +18,8 @@ Optional properties:
 - touchscreen-inverted-y  : See touchscreen.txt
 - touchscreen-swapped-x-y : See touchscreen.txt
 - silead,max-fingers	  : maximum number of fingers the touchscreen can detect
+- vddio-supply		  : regulator phandle for controller VDDIO
+- avdd-supply		  : regulator phandle for controller AVDD
 
 Example:
 

Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt

@@ -14,6 +14,9 @@ Optional properties for Touchscreens:
  - touchscreen-fuzz-pressure	: pressure noise value of the absolute input
 				  device (arbitrary range dependent on the
 				  controller)
+ - touchscreen-average-samples : Number of data samples which are averaged
+				  for each read (valid values dependent on the
+				  controller)
  - touchscreen-inverted-x	: X axis is inverted (boolean)
  - touchscreen-inverted-y	: Y axis is inverted (boolean)
  - touchscreen-swapped-x-y	: X and Y axis are swapped (boolean)

drivers/input/joystick/xpad.c

@@ -134,6 +134,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+	{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -1044,9 +1045,9 @@ static int xpad_play_effect(struct input_dev *dev, void *data, struct ff_effect
 		packet->data[7] = 0x00;
 		packet->data[8] = strong / 512;	/* left actuator */
 		packet->data[9] = weak / 512;	/* right actuator */
-		packet->data[10] = 0xFF;
-		packet->data[11] = 0x00;
-		packet->data[12] = 0x00;
+		packet->data[10] = 0xFF; /* on period */
+		packet->data[11] = 0x00; /* off period */
+		packet->data[12] = 0xFF; /* repeat count */
 		packet->len = 13;
 		packet->pending = true;
 		break;

drivers/input/keyboard/gpio_keys_polled.c

@@ -30,10 +30,10 @@
 #define DRV_NAME	"gpio-keys-polled"
 
 struct gpio_keys_button_data {
+	struct gpio_desc *gpiod;
 	int last_state;
 	int count;
 	int threshold;
-	int can_sleep;
 };
 
 struct gpio_keys_polled_dev {
@@ -46,7 +46,7 @@ struct gpio_keys_polled_dev {
 };
 
 static void gpio_keys_button_event(struct input_polled_dev *dev,
-				   struct gpio_keys_button *button,
+				   const struct gpio_keys_button *button,
 				   int state)
 {
 	struct gpio_keys_polled_dev *bdev = dev->private;
@@ -70,22 +70,23 @@ static void gpio_keys_button_event(struct input_polled_dev *dev,
 }
 
 static void gpio_keys_polled_check_state(struct input_polled_dev *dev,
-					 struct gpio_keys_button *button,
+					 const struct gpio_keys_button *button,
 					 struct gpio_keys_button_data *bdata)
 {
 	int state;
 
-	if (bdata->can_sleep)
-		state = !!gpiod_get_value_cansleep(button->gpiod);
-	else
-		state = !!gpiod_get_value(button->gpiod);
-
+	state = gpiod_get_value_cansleep(bdata->gpiod);
+	if (state < 0) {
+		dev_err(dev->input->dev.parent,
+			"failed to get gpio state: %d\n", state);
+	} else {
 		gpio_keys_button_event(dev, button, state);
 
 		if (state != bdata->last_state) {
 			bdata->count = 0;
 			bdata->last_state = state;
 		}
+	}
 }
 
 static void gpio_keys_polled_poll(struct input_polled_dev *dev)
@@ -142,48 +143,35 @@ static void gpio_keys_polled_close(struct input_polled_dev *dev)
 		pdata->disable(bdev->dev);
 }
 
-static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct device *dev)
+static struct gpio_keys_platform_data *
+gpio_keys_polled_get_devtree_pdata(struct device *dev)
 {
 	struct gpio_keys_platform_data *pdata;
 	struct gpio_keys_button *button;
 	struct fwnode_handle *child;
-	int error;
 	int nbuttons;
 
 	nbuttons = device_get_child_node_count(dev);
 	if (nbuttons == 0)
-		return NULL;
+		return ERR_PTR(-EINVAL);
 
 	pdata = devm_kzalloc(dev, sizeof(*pdata) + nbuttons * sizeof(*button),
 			     GFP_KERNEL);
 	if (!pdata)
 		return ERR_PTR(-ENOMEM);
 
-	pdata->buttons = (struct gpio_keys_button *)(pdata + 1);
+	button = (struct gpio_keys_button *)(pdata + 1);
+
+	pdata->buttons = button;
+	pdata->nbuttons = nbuttons;
 
 	pdata->rep = device_property_present(dev, "autorepeat");
 	device_property_read_u32(dev, "poll-interval", &pdata->poll_interval);
 
 	device_for_each_child_node(dev, child) {
-		struct gpio_desc *desc;
-
-		desc = devm_get_gpiod_from_child(dev, NULL, child);
-		if (IS_ERR(desc)) {
-			error = PTR_ERR(desc);
-			if (error != -EPROBE_DEFER)
-				dev_err(dev,
-					"Failed to get gpio flags, error: %d\n",
-					error);
-			fwnode_handle_put(child);
-			return ERR_PTR(error);
-		}
-
-		button = &pdata->buttons[pdata->nbuttons++];
-		button->gpiod = desc;
-
-		if (fwnode_property_read_u32(child, "linux,code", &button->code)) {
-			dev_err(dev, "Button without keycode: %d\n",
-				pdata->nbuttons - 1);
+		if (fwnode_property_read_u32(child, "linux,code",
+					     &button->code)) {
+			dev_err(dev, "button without keycode\n");
 			fwnode_handle_put(child);
 			return ERR_PTR(-EINVAL);
 		}
@@ -206,10 +194,9 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 		if (fwnode_property_read_u32(child, "debounce-interval",
 					     &button->debounce_interval))
 			button->debounce_interval = 5;
-	}
 
-	if (pdata->nbuttons == 0)
-		return ERR_PTR(-EINVAL);
+		button++;
+	}
 
 	return pdata;
 }
@@ -220,7 +207,7 @@ static void gpio_keys_polled_set_abs_params(struct input_dev *input,
 	int i, min = 0, max = 0;
 
 	for (i = 0; i < pdata->nbuttons; i++) {
-		struct gpio_keys_button *button = &pdata->buttons[i];
+		const struct gpio_keys_button *button = &pdata->buttons[i];
 
 		if (button->type != EV_ABS || button->code != code)
 			continue;
@@ -230,6 +217,7 @@ static void gpio_keys_polled_set_abs_params(struct input_dev *input,
 		if (button->value > max)
 			max = button->value;
 	}
+
 	input_set_abs_params(input, code, min, max, 0, 0);
 }
 
@@ -242,6 +230,7 @@ MODULE_DEVICE_TABLE(of, gpio_keys_polled_of_match);
 static int gpio_keys_polled_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct fwnode_handle *child = NULL;
 	const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);
 	struct gpio_keys_polled_dev *bdev;
 	struct input_polled_dev *poll_dev;
@@ -254,10 +243,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 		pdata = gpio_keys_polled_get_devtree_pdata(dev);
 		if (IS_ERR(pdata))
 			return PTR_ERR(pdata);
-		if (!pdata) {
-			dev_err(dev, "missing platform data\n");
-			return -EINVAL;
-		}
 	}
 
 	if (!pdata->poll_interval) {
@@ -300,20 +285,48 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 		__set_bit(EV_REP, input->evbit);
 
 	for (i = 0; i < pdata->nbuttons; i++) {
-		struct gpio_keys_button *button = &pdata->buttons[i];
+		const struct gpio_keys_button *button = &pdata->buttons[i];
 		struct gpio_keys_button_data *bdata = &bdev->data[i];
 		unsigned int type = button->type ?: EV_KEY;
 
 		if (button->wakeup) {
 			dev_err(dev, DRV_NAME " does not support wakeup\n");
+			fwnode_handle_put(child);
 			return -EINVAL;
 		}
 
+		if (!dev_get_platdata(dev)) {
+			/* No legacy static platform data */
+			child = device_get_next_child_node(dev, child);
+			if (!child) {
+				dev_err(dev, "missing child device node\n");
+				return -EINVAL;
+			}
+
+			bdata->gpiod = devm_get_gpiod_from_child(dev, NULL,
+								 child);
+			if (IS_ERR(bdata->gpiod)) {
+				error = PTR_ERR(bdata->gpiod);
+				if (error != -EPROBE_DEFER)
+					dev_err(dev,
+						"failed to get gpio: %d\n",
+						error);
+				fwnode_handle_put(child);
+				return error;
+			}
+
+			error = gpiod_direction_input(bdata->gpiod);
+			if (error) {
+				dev_err(dev, "Failed to configure GPIO %d as input: %d\n",
+					desc_to_gpio(bdata->gpiod), error);
+				fwnode_handle_put(child);
+				return error;
+			}
+		} else if (gpio_is_valid(button->gpio)) {
 			/*
 			 * Legacy GPIO number so request the GPIO here and
 			 * convert it to descriptor.
 			 */
-		if (!button->gpiod && gpio_is_valid(button->gpio)) {
 			unsigned flags = GPIOF_IN;
 
 			if (button->active_low)
@@ -322,18 +335,21 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 			error = devm_gpio_request_one(&pdev->dev, button->gpio,
 					flags, button->desc ? : DRV_NAME);
 			if (error) {
-				dev_err(dev, "unable to claim gpio %u, err=%d\n",
+				dev_err(dev,
+					"unable to claim gpio %u, err=%d\n",
 					button->gpio, error);
 				return error;
 			}
 
-			button->gpiod = gpio_to_desc(button->gpio);
+			bdata->gpiod = gpio_to_desc(button->gpio);
+			if (!bdata->gpiod) {
+				dev_err(dev,
+					"unable to convert gpio %u to descriptor\n",
+					button->gpio);
+				return -EINVAL;
+			}
 		}
 
-		if (IS_ERR(button->gpiod))
-			return PTR_ERR(button->gpiod);
-
-		bdata->can_sleep = gpiod_cansleep(button->gpiod);
 		bdata->last_state = -1;
 		bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
 						pdata->poll_interval);
@@ -344,6 +360,8 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 							button->code);
 	}
 
+	fwnode_handle_put(child);
+
 	bdev->poll_dev = poll_dev;
 	bdev->dev = dev;
 	bdev->pdata = pdata;

drivers/input/keyboard/lpc32xx-keys.c

@@ -182,7 +182,7 @@ static int lpc32xx_kscan_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0 || irq >= NR_IRQS) {
+	if (irq < 0) {
 		dev_err(&pdev->dev, "failed to get platform irq\n");
 		return -EINVAL;
 	}

drivers/input/keyboard/pxa27x_keypad.c

@@ -316,7 +316,7 @@ static int pxa27x_keypad_build_keycode_from_dt(struct pxa27x_keypad *keypad)
 	error = of_property_read_u32(np, "marvell,debounce-interval",
 				     &pdata->debounce_interval);
 	if (error) {
-		dev_err(dev, "failed to parse debpunce-interval\n");
+		dev_err(dev, "failed to parse debounce-interval\n");
 		return error;
 	}
 

drivers/input/keyboard/tca8418_keypad.c

@@ -164,11 +164,18 @@ static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
 	int error, col, row;
 	u8 reg, state, code;
 
-	/* Initial read of the key event FIFO */
+	do {
 		error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
+		if (error < 0) {
+			dev_err(&keypad_data->client->dev,
+				"unable to read REG_KEY_EVENT_A\n");
+			break;
+		}
 
 		/* Assume that key code 0 signifies empty FIFO */
-	while (error >= 0 && reg > 0) {
+		if (reg <= 0)
+			break;
+
 		state = reg & KEY_EVENT_VALUE;
 		code  = reg & KEY_EVENT_CODE;
 
@@ -184,11 +191,7 @@ static void tca8418_read_keypad(struct tca8418_keypad *keypad_data)
 
 		/* Read for next loop */
 		error = tca8418_read_byte(keypad_data, REG_KEY_EVENT_A, &reg);
-	}
-
-	if (error < 0)
-		dev_err(&keypad_data->client->dev,
-			"unable to read REG_KEY_EVENT_A\n");
+	} while (1);
 
 	input_sync(input);
 }

drivers/input/misc/Kconfig

@@ -625,11 +625,12 @@ config INPUT_DA9055_ONKEY
 	  will be called da9055_onkey.
 
 config INPUT_DA9063_ONKEY
-	tristate "Dialog DA9062/63 OnKey"
+	tristate "Dialog DA9063/62/61 OnKey"
 	depends on MFD_DA9063 || MFD_DA9062
 	help
-	  Support the ONKEY of Dialog DA9063 and DA9062 Power Management ICs
-	  as an input device capable of reporting the power button status.
+	  Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power
+	  Management ICs as an input device capable of reporting the
+	  power button status.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called da9063_onkey.

drivers/input/misc/bma150.c

@@ -538,8 +538,13 @@ static int bma150_probe(struct i2c_client *client,
 		return -EIO;
 	}
 
+	/*
+	 * Note if the IIO CONFIG_BMA180 driver is enabled we want to fail
+	 * the probe for the bma180 as the iio driver is preferred.
+	 */
 	chip_id = i2c_smbus_read_byte_data(client, BMA150_CHIP_ID_REG);
-	if (chip_id != BMA150_CHIP_ID && chip_id != BMA180_CHIP_ID) {
+	if (chip_id != BMA150_CHIP_ID &&
+	    (IS_ENABLED(CONFIG_BMA180) || chip_id != BMA180_CHIP_ID)) {
 		dev_err(&client->dev, "BMA150 chip id error: %d\n", chip_id);
 		return -EINVAL;
 	}
@@ -643,7 +648,9 @@ static UNIVERSAL_DEV_PM_OPS(bma150_pm, bma150_suspend, bma150_resume, NULL);
 
 static const struct i2c_device_id bma150_id[] = {
 	{ "bma150", 0 },
+#if !IS_ENABLED(CONFIG_BMA180)
 	{ "bma180", 0 },
+#endif
 	{ "smb380", 0 },
 	{ "bma023", 0 },
 	{ }

drivers/input/misc/da9063_onkey.c

 /*
- * OnKey device driver for DA9063 and DA9062 PMICs
+ * OnKey device driver for DA9063, DA9062 and DA9061 PMICs
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
@@ -87,6 +87,7 @@ static const struct of_device_id da9063_compatible_reg_id_table[] = {
 	{ .compatible = "dlg,da9062-onkey", .data = &da9062_regs },
 	{ },
 };
+MODULE_DEVICE_TABLE(of, da9063_compatible_reg_id_table);
 
 static void da9063_poll_on(struct work_struct *work)
 {
@@ -149,13 +150,13 @@ static void da9063_poll_on(struct work_struct *work)
 			 * and then send shutdown command
 			 */
 			dev_dbg(&onkey->input->dev,
-				"Sending SHUTDOWN to DA9063 ...\n");
+				"Sending SHUTDOWN to PMIC ...\n");
 			error = regmap_write(onkey->regmap,
 					     config->onkey_shutdown,
 					     config->onkey_shutdown_mask);
 			if (error)
 				dev_err(&onkey->input->dev,
-					"Cannot SHUTDOWN DA9063: %d\n",
+					"Cannot SHUTDOWN PMIC: %d\n",
 					error);
 		}
 	}
@@ -300,6 +301,6 @@ static struct platform_driver da9063_onkey_driver = {
 module_platform_driver(da9063_onkey_driver);
 
 MODULE_AUTHOR("S Twiss <stwiss.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063 and DA9062");
+MODULE_DESCRIPTION("Onkey device driver for Dialog DA9063, DA9062 and DA9061");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" DA9063_DRVNAME_ONKEY);

drivers/input/misc/drv260x.c

@@ -18,8 +18,6 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -27,7 +25,6 @@
 #include <linux/regulator/consumer.h>
 
 #include <dt-bindings/input/ti-drv260x.h>
-#include <linux/platform_data/drv260x-pdata.h>
 
 #define DRV260X_STATUS		0x0
 #define DRV260X_MODE		0x1
@@ -468,90 +465,39 @@ static const struct regmap_config drv260x_regmap_config = {
 	.cache_type = REGCACHE_NONE,
 };
 
-#ifdef CONFIG_OF
-static int drv260x_parse_dt(struct device *dev,
-			    struct drv260x_data *haptics)
-{
-	struct device_node *np = dev->of_node;
-	unsigned int voltage;
-	int error;
-
-	error = of_property_read_u32(np, "mode", &haptics->mode);
-	if (error) {
-		dev_err(dev, "%s: No entry for mode\n", __func__);
-		return error;
-	}
-
-	error = of_property_read_u32(np, "library-sel", &haptics->library);
-	if (error) {
-		dev_err(dev, "%s: No entry for library selection\n",
-			__func__);
-		return error;
-	}
-
-	error = of_property_read_u32(np, "vib-rated-mv", &voltage);
-	if (!error)
-		haptics->rated_voltage = drv260x_calculate_voltage(voltage);
-
-
-	error = of_property_read_u32(np, "vib-overdrive-mv", &voltage);
-	if (!error)
-		haptics->overdrive_voltage = drv260x_calculate_voltage(voltage);
-
-	return 0;
-}
-#else
-static inline int drv260x_parse_dt(struct device *dev,
-				   struct drv260x_data *haptics)
-{
-	dev_err(dev, "no platform data defined\n");
-
-	return -EINVAL;
-}
-#endif
-
 static int drv260x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	const struct drv260x_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct device *dev = &client->dev;
 	struct drv260x_data *haptics;
+	u32 voltage;
 	int error;
 
-	haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
+	haptics = devm_kzalloc(dev, sizeof(*haptics), GFP_KERNEL);
 	if (!haptics)
 		return -ENOMEM;
 
-	haptics->rated_voltage = DRV260X_DEF_OD_CLAMP_VOLT;
-	haptics->rated_voltage = DRV260X_DEF_RATED_VOLT;
-
-	if (pdata) {
-		haptics->mode = pdata->mode;
-		haptics->library = pdata->library_selection;
-		if (pdata->vib_overdrive_voltage)
-			haptics->overdrive_voltage = drv260x_calculate_voltage(pdata->vib_overdrive_voltage);
-		if (pdata->vib_rated_voltage)
-			haptics->rated_voltage = drv260x_calculate_voltage(pdata->vib_rated_voltage);
-	} else if (client->dev.of_node) {
-		error = drv260x_parse_dt(&client->dev, haptics);
-		if (error)
+	error = device_property_read_u32(dev, "mode", &haptics->mode);
+	if (error) {
+		dev_err(dev, "Can't fetch 'mode' property: %d\n", error);
 		return error;
-	} else {
-		dev_err(&client->dev, "Platform data not set\n");
-		return -ENODEV;
 	}
 
-
 	if (haptics->mode < DRV260X_LRA_MODE ||
 	    haptics->mode > DRV260X_ERM_MODE) {
-		dev_err(&client->dev,
-			"Vibrator mode is invalid: %i\n",
-			haptics->mode);
+		dev_err(dev, "Vibrator mode is invalid: %i\n", haptics->mode);
 		return -EINVAL;
 	}
 
+	error = device_property_read_u32(dev, "library-sel", &haptics->library);
+	if (error) {
+		dev_err(dev, "Can't fetch 'library-sel' property: %d\n", error);
+		return error;
+	}
+
 	if (haptics->library < DRV260X_LIB_EMPTY ||
 	    haptics->library > DRV260X_ERM_LIB_F) {
-		dev_err(&client->dev,
+		dev_err(dev,
 			"Library value is invalid: %i\n", haptics->library);
 		return -EINVAL;
 	}
@@ -559,40 +505,44 @@ static int drv260x_probe(struct i2c_client *client,
 	if (haptics->mode == DRV260X_LRA_MODE &&
 	    haptics->library != DRV260X_LIB_EMPTY &&
 	    haptics->library != DRV260X_LIB_LRA) {
-		dev_err(&client->dev,
-			"LRA Mode with ERM Library mismatch\n");
+		dev_err(dev, "LRA Mode with ERM Library mismatch\n");
 		return -EINVAL;
 	}
 
 	if (haptics->mode == DRV260X_ERM_MODE &&
 	    (haptics->library == DRV260X_LIB_EMPTY ||
 	     haptics->library == DRV260X_LIB_LRA)) {
-		dev_err(&client->dev,
-			"ERM Mode with LRA Library mismatch\n");
+		dev_err(dev, "ERM Mode with LRA Library mismatch\n");
 		return -EINVAL;
 	}
 
-	haptics->regulator = devm_regulator_get(&client->dev, "vbat");
+	error = device_property_read_u32(dev, "vib-rated-mv", &voltage);
+	haptics->rated_voltage = error ? DRV260X_DEF_RATED_VOLT :
+					 drv260x_calculate_voltage(voltage);
+
+	error = device_property_read_u32(dev, "vib-overdrive-mv", &voltage);
+	haptics->overdrive_voltage = error ? DRV260X_DEF_OD_CLAMP_VOLT :
+					     drv260x_calculate_voltage(voltage);
+
+	haptics->regulator = devm_regulator_get(dev, "vbat");
 	if (IS_ERR(haptics->regulator)) {
 		error = PTR_ERR(haptics->regulator);
-		dev_err(&client->dev,
-			"unable to get regulator, error: %d\n", error);
+		dev_err(dev, "unable to get regulator, error: %d\n", error);
 		return error;
 	}
 
-	haptics->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
+	haptics->enable_gpio = devm_gpiod_get_optional(dev, "enable",
 						       GPIOD_OUT_HIGH);
 	if (IS_ERR(haptics->enable_gpio))
 		return PTR_ERR(haptics->enable_gpio);
 
-	haptics->input_dev = devm_input_allocate_device(&client->dev);
+	haptics->input_dev = devm_input_allocate_device(dev);
 	if (!haptics->input_dev) {
 		dev_err(&client->dev, "Failed to allocate input device\n");
 		return -ENOMEM;
 	}
 
 	haptics->input_dev->name = "drv260x:haptics";
-	haptics->input_dev->dev.parent = client->dev.parent;
 	haptics->input_dev->close = drv260x_close;
 	input_set_drvdata(haptics->input_dev, haptics);
 	input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
@@ -600,8 +550,7 @@ static int drv260x_probe(struct i2c_client *client,
 	error = input_ff_create_memless(haptics->input_dev, NULL,
 					drv260x_haptics_play);
 	if (error) {
-		dev_err(&client->dev, "input_ff_create() failed: %d\n",
-			error);
+		dev_err(dev, "input_ff_create() failed: %d\n", error);
 		return error;
 	}
 
@@ -613,21 +562,19 @@ static int drv260x_probe(struct i2c_client *client,
 	haptics->regmap = devm_regmap_init_i2c(client, &drv260x_regmap_config);
 	if (IS_ERR(haptics->regmap)) {
 		error = PTR_ERR(haptics->regmap);
-		dev_err(&client->dev, "Failed to allocate register map: %d\n",
-			error);
+		dev_err(dev, "Failed to allocate register map: %d\n", error);
 		return error;
 	}
 
 	error = drv260x_init(haptics);
 	if (error) {
-		dev_err(&client->dev, "Device init failed: %d\n", error);
+		dev_err(dev, "Device init failed: %d\n", error);
 		return error;
 	}
 
 	error = input_register_device(haptics->input_dev);
 	if (error) {
-		dev_err(&client->dev, "couldn't register input device: %d\n",
-			error);
+		dev_err(dev, "couldn't register input device: %d\n", error);
 		return error;
 	}
 

drivers/input/misc/drv2665.c

@@ -125,8 +125,8 @@ static void drv2665_close(struct input_dev *input)
 
 	cancel_work_sync(&haptics->work);
 
-	error = regmap_update_bits(haptics->regmap,
-				   DRV2665_CTRL_2, DRV2665_STANDBY, 1);
+	error = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
+				   DRV2665_STANDBY, DRV2665_STANDBY);
 	if (error)
 		dev_err(&haptics->client->dev,
 			"Failed to enter standby mode: %d\n", error);
@@ -240,7 +240,7 @@ static int __maybe_unused drv2665_suspend(struct device *dev)
 
 	if (haptics->input_dev->users) {
 		ret = regmap_update_bits(haptics->regmap, DRV2665_CTRL_2,
-				DRV2665_STANDBY, 1);
+					 DRV2665_STANDBY, DRV2665_STANDBY);
 		if (ret) {
 			dev_err(dev, "Failed to set standby mode\n");
 			regulator_disable(haptics->regulator);

drivers/input/misc/drv2667.c

@@ -256,7 +256,7 @@ static void drv2667_close(struct input_dev *input)
 	cancel_work_sync(&haptics->work);
 
 	error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
-				DRV2667_STANDBY, 1);
+				   DRV2667_STANDBY, DRV2667_STANDBY);
 	if (error)
 		dev_err(&haptics->client->dev,
 			"Failed to enter standby mode: %d\n", error);
@@ -415,7 +415,7 @@ static int __maybe_unused drv2667_suspend(struct device *dev)
 
 	if (haptics->input_dev->users) {
 		ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
-				DRV2667_STANDBY, 1);
+					 DRV2667_STANDBY, DRV2667_STANDBY);
 		if (ret) {
 			dev_err(dev, "Failed to set standby mode\n");
 			regulator_disable(haptics->regulator);

drivers/input/misc/soc_button_array.c

@@ -17,6 +17,7 @@
 #include <linux/acpi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 /*
@@ -92,7 +93,7 @@ soc_button_device_create(struct platform_device *pdev,
 			continue;
 
 		gpio = soc_button_lookup_gpio(&pdev->dev, info->acpi_index);
-		if (gpio < 0)
+		if (!gpio_is_valid(gpio))
 			continue;
 
 		gpio_keys[n_buttons].type = info->event_type;
@@ -166,6 +167,11 @@ static int soc_button_probe(struct platform_device *pdev)
 
 	button_info = (struct soc_button_info *)id->driver_data;
 
+	if (gpiod_count(&pdev->dev, KBUILD_MODNAME) <= 0) {
+		dev_dbg(&pdev->dev, "no GPIO attached, ignoring...\n");
+		return -ENODEV;
+	}
+
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

drivers/input/mouse/alps.c

@@ -1153,15 +1153,13 @@ static void alps_process_packet_v7(struct psmouse *psmouse)
 		alps_process_touchpad_packet_v7(psmouse);
 }
 
-static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte)
+static enum SS4_PACKET_ID alps_get_pkt_id_ss4_v2(unsigned char *byte)
 {
-	unsigned char pkt_id = SS4_PACKET_ID_IDLE;
+	enum SS4_PACKET_ID pkt_id = SS4_PACKET_ID_IDLE;
 
 	switch (byte[3] & 0x30) {
 	case 0x00:
-		if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 &&
-		    (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 &&
-		    byte[5] == 0x00) {
+		if (SS4_IS_IDLE_V2(byte)) {
 			pkt_id = SS4_PACKET_ID_IDLE;
 		} else {
 			pkt_id = SS4_PACKET_ID_ONE;
@@ -1188,7 +1186,7 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 			      unsigned char *p, struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
-	unsigned char pkt_id;
+	enum SS4_PACKET_ID pkt_id;
 	unsigned int no_data_x, no_data_y;
 
 	pkt_id = alps_get_pkt_id_ss4_v2(p);
@@ -1267,18 +1265,12 @@ static int alps_decode_ss4_v2(struct alps_fields *f,
 		break;
 
 	case SS4_PACKET_ID_STICK:
-		if (!(priv->flags & ALPS_DUALPOINT)) {
-			psmouse_warn(psmouse,
-				     "Rejected trackstick packet from non DualPoint device");
-		} else {
-			int x = (s8)(((p[0] & 1) << 7) | (p[1] & 0x7f));
-			int y = (s8)(((p[3] & 1) << 7) | (p[2] & 0x7f));
-			int pressure = (s8)(p[4] & 0x7f);
-
-			input_report_rel(priv->dev2, REL_X, x);
-			input_report_rel(priv->dev2, REL_Y, -y);
-			input_report_abs(priv->dev2, ABS_PRESSURE, pressure);
-		}
+		/*
+		 * x, y, and pressure are decoded in
+		 * alps_process_packet_ss4_v2()
+		 */
+		f->first_mp = 0;
+		f->is_mp = 0;
 		break;
 
 	case SS4_PACKET_ID_IDLE:
@@ -1346,6 +1338,27 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
 
 	priv->multi_packet = 0;
 
+	/* Report trackstick */
+	if (alps_get_pkt_id_ss4_v2(packet) == SS4_PACKET_ID_STICK) {
+		if (!(priv->flags & ALPS_DUALPOINT)) {
+			psmouse_warn(psmouse,
+				     "Rejected trackstick packet from non DualPoint device");
+			return;
+		}
+
+		input_report_rel(dev2, REL_X, SS4_TS_X_V2(packet));
+		input_report_rel(dev2, REL_Y, SS4_TS_Y_V2(packet));
+		input_report_abs(dev2, ABS_PRESSURE, SS4_TS_Z_V2(packet));
+
+		input_report_key(dev2, BTN_LEFT, f->ts_left);
+		input_report_key(dev2, BTN_RIGHT, f->ts_right);
+		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
+
+		input_sync(dev2);
+		return;
+	}
+
+	/* Report touchpad */
 	alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4);
 
 	input_mt_report_finger_count(dev, f->fingers);
@@ -1356,13 +1369,6 @@ static void alps_process_packet_ss4_v2(struct psmouse *psmouse)
 
 	input_report_abs(dev, ABS_PRESSURE, f->pressure);
 	input_sync(dev);
-
-	if (priv->flags & ALPS_DUALPOINT) {
-		input_report_key(dev2, BTN_LEFT, f->ts_left);
-		input_report_key(dev2, BTN_RIGHT, f->ts_right);
-		input_report_key(dev2, BTN_MIDDLE, f->ts_middle);
-		input_sync(dev2);
-	}
 }
 
 static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse)

drivers/input/mouse/alps.h

@@ -54,7 +54,15 @@ enum SS4_PACKET_ID {
 
 #define SS4_MASK_NORMAL_BUTTONS		0x07
 
-#define SS4_1F_X_V2(_b)		((_b[0] & 0x0007) |		\
+#define SS4_IS_IDLE_V2(_b)	(((_b[0]) == 0x18) &&		\
+				 ((_b[1]) == 0x10) &&		\
+				 ((_b[2]) == 0x00) &&		\
+				 ((_b[3] & 0x88) == 0x08) &&	\
+				 ((_b[4]) == 0x10) &&		\
+				 ((_b[5]) == 0x00)		\
+				)
+
+#define SS4_1F_X_V2(_b)		(((_b[0]) & 0x0007) |		\
 				 ((_b[1] << 3) & 0x0078) |	\
 				 ((_b[1] << 2) & 0x0380) |	\
 				 ((_b[2] << 5) & 0x1C00)	\
@@ -101,6 +109,18 @@ enum SS4_PACKET_ID {
 #define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10)
 #define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10)
 
+#define SS4_TS_X_V2(_b)		(s8)(				\
+				 ((_b[0] & 0x01) << 7) |	\
+				 (_b[1] & 0x7F)		\
+				)
+
+#define SS4_TS_Y_V2(_b)		(s8)(				\
+				 ((_b[3] & 0x01) << 7) |	\
+				 (_b[2] & 0x7F)		\
+				)
+
+#define SS4_TS_Z_V2(_b)		(s8)(_b[4] & 0x7F)
+
 
 #define SS4_MFPACKET_NO_AX	8160	/* X-Coordinate value */
 #define SS4_MFPACKET_NO_AY	4080	/* Y-Coordinate value */
@@ -146,7 +166,7 @@ struct alps_protocol_info {
  *   (aka command mode response) identifies the firmware minor version.  This
  *   can be used to distinguish different hardware models which are not
  *   uniquely identifiable through their E7 responses.
- * @protocol_info: information about protcol used by the device.
+ * @protocol_info: information about protocol used by the device.
  *
  * Many (but not all) ALPS touchpads can be identified by looking at the
  * values returned in the "E7 report" and/or the "EC report."  This table

drivers/input/mouse/elan_i2c_core.c

@@ -1093,19 +1093,18 @@ static int elan_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
+	dev_info(&client->dev,
+		 "Elan Touchpad: Module ID: 0x%04x, Firmware: 0x%04x, Sample: 0x%04x, IAP: 0x%04x\n",
+		 data->product_id,
+		 data->fw_version,
+		 data->sm_version,
+		 data->iap_version);
+
 	dev_dbg(&client->dev,
-		"Elan Touchpad Information:\n"
-		"    Module product ID:  0x%04x\n"
-		"    Firmware Version:  0x%04x\n"
-		"    Sample Version:  0x%04x\n"
-		"    IAP Version:  0x%04x\n"
+		"Elan Touchpad Extra Information:\n"
 		"    Max ABS X,Y:   %d,%d\n"
 		"    Width X,Y:   %d,%d\n"
 		"    Resolution X,Y:   %d,%d (dots/mm)\n",
-		data->product_id,
-		data->fw_version,
-		data->sm_version,
-		data->iap_version,
 		data->max_x, data->max_y,
 		data->width_x, data->width_y,
 		data->x_res, data->y_res);

drivers/input/rmi4/Kconfig

@@ -27,6 +27,27 @@ config RMI4_SPI
 
 	  If unsure, say N.
 
+config RMI4_SMB
+	tristate "RMI4 SMB Support"
+	depends on RMI4_CORE && I2C
+	help
+	  Say Y here if you want to support RMI4 devices connected to an SMB
+	  bus.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called rmi_smbus.
+
+config RMI4_F03
+        bool "RMI4 Function 03 (PS2 Guest)"
+        depends on RMI4_CORE && SERIO
+        help
+          Say Y here if you want to add support for RMI4 function 03.
+
+          Function 03 provides PS2 guest support for RMI4 devices. This
+          includes support for TrackPoints on TouchPads.
+
 config RMI4_2D_SENSOR
 	bool
 	depends on RMI4_CORE
@@ -62,13 +83,34 @@ config RMI4_F30
 	  Function 30 provides GPIO and LED support for RMI4 devices. This
 	  includes support for buttons on TouchPads and ClickPads.
 
+config RMI4_F34
+	bool "RMI4 Function 34 (Device reflash)"
+	depends on RMI4_CORE
+	select FW_LOADER
+	help
+	  Say Y here if you want to add support for RMI4 function 34.
+
+	  Function 34 provides support for upgrading the firmware on the RMI4
+	  device via the firmware loader interface. This is triggered using a
+	  sysfs attribute.
+
 config RMI4_F54
 	bool "RMI4 Function 54 (Analog diagnostics)"
 	depends on RMI4_CORE
 	depends on VIDEO_V4L2=y || (RMI4_CORE=m && VIDEO_V4L2=m)
 	select VIDEOBUF2_VMALLOC
+	select RMI4_F55
 	help
 	  Say Y here if you want to add support for RMI4 function 54
 
 	  Function 54 provides access to various diagnostic features in certain
 	  RMI4 touch sensors.
+
+config RMI4_F55
+	bool "RMI4 Function 55 (Sensor tuning)"
+	depends on RMI4_CORE
+	help
+	  Say Y here if you want to add support for RMI4 function 55
+
+	  Function 55 provides access to the RMI4 touch sensor tuning
+	  mechanism.

drivers/input/rmi4/Makefile

@@ -4,11 +4,15 @@ rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
 rmi_core-$(CONFIG_RMI4_2D_SENSOR) += rmi_2d_sensor.o
 
 # Function drivers
+rmi_core-$(CONFIG_RMI4_F03) += rmi_f03.o
 rmi_core-$(CONFIG_RMI4_F11) += rmi_f11.o
 rmi_core-$(CONFIG_RMI4_F12) += rmi_f12.o
 rmi_core-$(CONFIG_RMI4_F30) += rmi_f30.o
+rmi_core-$(CONFIG_RMI4_F34) += rmi_f34.o rmi_f34v7.o
 rmi_core-$(CONFIG_RMI4_F54) += rmi_f54.o
+rmi_core-$(CONFIG_RMI4_F55) += rmi_f55.o
 
 # Transports
 obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
 obj-$(CONFIG_RMI4_SPI) += rmi_spi.o
+obj-$(CONFIG_RMI4_SMB) += rmi_smbus.o

drivers/input/rmi4/rmi_2d_sensor.c

@@ -181,6 +181,8 @@ static void rmi_2d_sensor_set_input_params(struct rmi_2d_sensor *sensor)
 		input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0);
 		input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0);
 		input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+		input_set_abs_params(input, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
 
 		if (sensor->sensor_type == rmi_sensor_touchpad)
 			input_flags = INPUT_MT_POINTER;

drivers/input/rmi4/rmi_2d_sensor.h

@@ -67,6 +67,8 @@ struct rmi_2d_sensor {
 	u8 report_rel;
 	u8 x_mm;
 	u8 y_mm;
+	enum rmi_reg_state dribble;
+	enum rmi_reg_state palm_detect;
 };
 
 int rmi_2d_sensor_of_probe(struct device *dev,

drivers/input/rmi4/rmi_bus.c

@@ -230,6 +230,9 @@ int rmi_register_function(struct rmi_function *fn)
 
 void rmi_unregister_function(struct rmi_function *fn)
 {
+	rmi_dbg(RMI_DEBUG_CORE, &fn->dev, "Unregistering F%02X.\n",
+			fn->fd.function_number);
+
 	device_del(&fn->dev);
 	of_node_put(fn->dev.of_node);
 	put_device(&fn->dev);
@@ -302,6 +305,9 @@ struct bus_type rmi_bus_type = {
 
 static struct rmi_function_handler *fn_handlers[] = {
 	&rmi_f01_handler,
+#ifdef CONFIG_RMI4_F03
+	&rmi_f03_handler,
+#endif
 #ifdef CONFIG_RMI4_F11
 	&rmi_f11_handler,
 #endif
@@ -311,9 +317,15 @@ static struct rmi_function_handler *fn_handlers[] = {
 #ifdef CONFIG_RMI4_F30
 	&rmi_f30_handler,
 #endif
+#ifdef CONFIG_RMI4_F34
+	&rmi_f34_handler,
+#endif
 #ifdef CONFIG_RMI4_F54
 	&rmi_f54_handler,
 #endif
+#ifdef CONFIG_RMI4_F55
+	&rmi_f55_handler,
+#endif
 };
 
 static void __rmi_unregister_function_handlers(int start_idx)

drivers/input/rmi4/rmi_bus.h

@@ -104,6 +104,18 @@ rmi_get_platform_data(struct rmi_device *d)
 
 bool rmi_is_physical_device(struct device *dev);
 
+/**
+ * rmi_reset - reset a RMI4 device
+ * @d: Pointer to an RMI device
+ *
+ * Calls for a reset of each function implemented by a specific device.
+ * Returns 0 on success or a negative error code.
+ */
+static inline int rmi_reset(struct rmi_device *d)
+{
+	return d->driver->reset_handler(d);
+}
+
 /**
  * rmi_read - read a single byte
  * @d: Pointer to an RMI device

drivers/input/rmi4/rmi_driver.h

@@ -51,9 +51,6 @@ struct pdt_entry {
 	u8 function_number;
 };
 
-int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
-			u16 pdt_address);
-
 #define RMI_REG_DESC_PRESENSE_BITS	(32 * BITS_PER_BYTE)
 #define RMI_REG_DESC_SUBPACKET_BITS	(37 * BITS_PER_BYTE)
 
@@ -95,12 +92,40 @@ bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
 bool rmi_is_physical_driver(struct device_driver *);
 int rmi_register_physical_driver(void);
 void rmi_unregister_physical_driver(void);
+void rmi_free_function_list(struct rmi_device *rmi_dev);
+int rmi_enable_sensor(struct rmi_device *rmi_dev);
+int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+		 int (*callback)(struct rmi_device *rmi_dev, void *ctx,
+		 const struct pdt_entry *entry));
+int rmi_probe_interrupts(struct rmi_driver_data *data);
+void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake);
+void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake);
+int rmi_init_functions(struct rmi_driver_data *data);
+int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
+		      const struct pdt_entry *pdt);
 
 char *rmi_f01_get_product_ID(struct rmi_function *fn);
 
+#ifdef CONFIG_RMI4_F34
+int rmi_f34_create_sysfs(struct rmi_device *rmi_dev);
+void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev);
+#else
+static inline int rmi_f34_create_sysfs(struct rmi_device *rmi_dev)
+{
+	return 0;
+}
+
+static inline void rmi_f34_remove_sysfs(struct rmi_device *rmi_dev)
+{
+}
+#endif /* CONFIG_RMI_F34 */
+
 extern struct rmi_function_handler rmi_f01_handler;
+extern struct rmi_function_handler rmi_f03_handler;
 extern struct rmi_function_handler rmi_f11_handler;
 extern struct rmi_function_handler rmi_f12_handler;
 extern struct rmi_function_handler rmi_f30_handler;
+extern struct rmi_function_handler rmi_f34_handler;
 extern struct rmi_function_handler rmi_f54_handler;
+extern struct rmi_function_handler rmi_f55_handler;
 #endif

drivers/input/rmi4/rmi_f01.c

@@ -62,6 +62,8 @@ struct f01_basic_properties {
 #define RMI_F01_STATUS_CODE(status)		((status) & 0x0f)
 /* The device has lost its configuration for some reason. */
 #define RMI_F01_STATUS_UNCONFIGURED(status)	(!!((status) & 0x80))
+/* The device is in bootloader mode */
+#define RMI_F01_STATUS_BOOTLOADER(status)	((status) & 0x40)
 
 /* Control register bits */
 
@@ -326,12 +328,12 @@ static int rmi_f01_probe(struct rmi_function *fn)
 	}
 
 	switch (pdata->power_management.nosleep) {
-	case RMI_F01_NOSLEEP_DEFAULT:
+	case RMI_REG_STATE_DEFAULT:
 		break;
-	case RMI_F01_NOSLEEP_OFF:
+	case RMI_REG_STATE_OFF:
 		f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_NOSLEEP_BIT;
 		break;
-	case RMI_F01_NOSLEEP_ON:
+	case RMI_REG_STATE_ON:
 		f01->device_control.ctrl0 |= RMI_F01_CTRL0_NOSLEEP_BIT;
 		break;
 	}
@@ -593,6 +595,10 @@ static int rmi_f01_attention(struct rmi_function *fn,
 		return error;
 	}
 
+	if (RMI_F01_STATUS_BOOTLOADER(device_status))
+		dev_warn(&fn->dev,
+			 "Device in bootloader mode, please update firmware\n");
+
 	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
 		dev_warn(&fn->dev, "Device reset detected.\n");
 		error = rmi_dev->driver->reset_handler(rmi_dev);

drivers/input/rmi4/rmi_f03.c

+/*
+ * Copyright (C) 2015-2016 Red Hat
+ * Copyright (C) 2015 Lyude Paul <thatslyude@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/serio.h>
+#include <linux/notifier.h>
+#include "rmi_driver.h"
+
+#define RMI_F03_RX_DATA_OFB		0x01
+#define RMI_F03_OB_SIZE			2
+
+#define RMI_F03_OB_OFFSET		2
+#define RMI_F03_OB_DATA_OFFSET		1
+#define RMI_F03_OB_FLAG_TIMEOUT		BIT(6)
+#define RMI_F03_OB_FLAG_PARITY		BIT(7)
+
+#define RMI_F03_DEVICE_COUNT		0x07
+#define RMI_F03_BYTES_PER_DEVICE	0x07
+#define RMI_F03_BYTES_PER_DEVICE_SHIFT	4
+#define RMI_F03_QUEUE_LENGTH		0x0F
+
+struct f03_data {
+	struct rmi_function *fn;
+
+	struct serio *serio;
+
+	u8 device_count;
+	u8 rx_queue_length;
+};
+
+static int rmi_f03_pt_write(struct serio *id, unsigned char val)
+{
+	struct f03_data *f03 = id->port_data;
+	int error;
+
+	rmi_dbg(RMI_DEBUG_FN, &f03->fn->dev,
+		"%s: Wrote %.2hhx to PS/2 passthrough address",
+		__func__, val);
+
+	error = rmi_write(f03->fn->rmi_dev, f03->fn->fd.data_base_addr, val);
+	if (error) {
+		dev_err(&f03->fn->dev,
+			"%s: Failed to write to F03 TX register (%d).\n",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f03_initialize(struct f03_data *f03)
+{
+	struct rmi_function *fn = f03->fn;
+	struct device *dev = &fn->dev;
+	int error;
+	u8 bytes_per_device;
+	u8 query1;
+	u8 query2[RMI_F03_DEVICE_COUNT * RMI_F03_BYTES_PER_DEVICE];
+	size_t query2_len;
+
+	error = rmi_read(fn->rmi_dev, fn->fd.query_base_addr, &query1);
+	if (error) {
+		dev_err(dev, "Failed to read query register (%d).\n", error);
+		return error;
+	}
+
+	f03->device_count = query1 & RMI_F03_DEVICE_COUNT;
+	bytes_per_device = (query1 >> RMI_F03_BYTES_PER_DEVICE_SHIFT) &
+				RMI_F03_BYTES_PER_DEVICE;
+
+	query2_len = f03->device_count * bytes_per_device;
+
+	/*
+	 * The first generation of image sensors don't have a second part to
+	 * their f03 query, as such we have to set some of these values manually
+	 */
+	if (query2_len < 1) {
+		f03->device_count = 1;
+		f03->rx_queue_length = 7;
+	} else {
+		error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr + 1,
+				       query2, query2_len);
+		if (error) {
+			dev_err(dev,
+				"Failed to read second set of query registers (%d).\n",
+				error);
+			return error;
+		}
+
+		f03->rx_queue_length = query2[0] & RMI_F03_QUEUE_LENGTH;
+	}
+
+	return 0;
+}
+
+static int rmi_f03_register_pt(struct f03_data *f03)
+{
+	struct serio *serio;
+
+	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!serio)
+		return -ENOMEM;
+
+	serio->id.type = SERIO_8042;
+	serio->write = rmi_f03_pt_write;
+	serio->port_data = f03;
+
+	strlcpy(serio->name, "Synaptics RMI4 PS/2 pass-through",
+		sizeof(serio->name));
+	strlcpy(serio->phys, "synaptics-rmi4-pt/serio1",
+		sizeof(serio->phys));
+	serio->dev.parent = &f03->fn->dev;
+
+	f03->serio = serio;
+
+	serio_register_port(serio);
+
+	return 0;
+}
+
+static int rmi_f03_probe(struct rmi_function *fn)
+{
+	struct device *dev = &fn->dev;
+	struct f03_data *f03;
+	int error;
+
+	f03 = devm_kzalloc(dev, sizeof(struct f03_data), GFP_KERNEL);
+	if (!f03)
+		return -ENOMEM;
+
+	f03->fn = fn;
+
+	error = rmi_f03_initialize(f03);
+	if (error < 0)
+		return error;
+
+	if (f03->device_count != 1)
+		dev_warn(dev, "found %d devices on PS/2 passthrough",
+			 f03->device_count);
+
+	dev_set_drvdata(dev, f03);
+
+	error = rmi_f03_register_pt(f03);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int rmi_f03_config(struct rmi_function *fn)
+{
+	fn->rmi_dev->driver->set_irq_bits(fn->rmi_dev, fn->irq_mask);
+
+	return 0;
+}
+
+static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
+	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+	u16 data_addr = fn->fd.data_base_addr;
+	const u8 ob_len = f03->rx_queue_length * RMI_F03_OB_SIZE;
+	u8 obs[RMI_F03_QUEUE_LENGTH * RMI_F03_OB_SIZE];
+	u8 ob_status;
+	u8 ob_data;
+	unsigned int serio_flags;
+	int i;
+	int error;
+
+	if (!rmi_dev)
+		return -ENODEV;
+
+	if (drvdata->attn_data.data) {
+		/* First grab the data passed by the transport device */
+		if (drvdata->attn_data.size < ob_len) {
+			dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
+			return 0;
+		}
+
+		memcpy(obs, drvdata->attn_data.data, ob_len);
+
+		drvdata->attn_data.data += ob_len;
+		drvdata->attn_data.size -= ob_len;
+	} else {
+		/* Grab all of the data registers, and check them for data */
+		error = rmi_read_block(fn->rmi_dev, data_addr + RMI_F03_OB_OFFSET,
+				       &obs, ob_len);
+		if (error) {
+			dev_err(&fn->dev,
+				"%s: Failed to read F03 output buffers: %d\n",
+				__func__, error);
+			serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
+			return error;
+		}
+	}
+
+	for (i = 0; i < ob_len; i += RMI_F03_OB_SIZE) {
+		ob_status = obs[i];
+		ob_data = obs[i + RMI_F03_OB_DATA_OFFSET];
+		serio_flags = 0;
+
+		if (!(ob_status & RMI_F03_RX_DATA_OFB))
+			continue;
+
+		if (ob_status & RMI_F03_OB_FLAG_TIMEOUT)
+			serio_flags |= SERIO_TIMEOUT;
+		if (ob_status & RMI_F03_OB_FLAG_PARITY)
+			serio_flags |= SERIO_PARITY;
+
+		rmi_dbg(RMI_DEBUG_FN, &fn->dev,
+			"%s: Received %.2hhx from PS2 guest T: %c P: %c\n",
+			__func__, ob_data,
+			serio_flags & SERIO_TIMEOUT ?  'Y' : 'N',
+			serio_flags & SERIO_PARITY ? 'Y' : 'N');
+
+		serio_interrupt(f03->serio, ob_data, serio_flags);
+	}
+
+	return 0;
+}
+
+static void rmi_f03_remove(struct rmi_function *fn)
+{
+	struct f03_data *f03 = dev_get_drvdata(&fn->dev);
+
+	serio_unregister_port(f03->serio);
+}
+
+struct rmi_function_handler rmi_f03_handler = {
+	.driver = {
+		.name = "rmi4_f03",
+	},
+	.func = 0x03,
+	.probe = rmi_f03_probe,
+	.config = rmi_f03_config,
+	.attention = rmi_f03_attention,
+	.remove = rmi_f03_remove,
+};
+
+MODULE_AUTHOR("Lyude Paul <thatslyude@gmail.com>");
+MODULE_DESCRIPTION("RMI F03 module");
+MODULE_LICENSE("GPL");

drivers/input/rmi4/rmi_f11.c

@@ -571,19 +571,29 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
 
 static void rmi_f11_finger_handler(struct f11_data *f11,
 				   struct rmi_2d_sensor *sensor,
-				   unsigned long *irq_bits, int num_irq_regs)
+				   unsigned long *irq_bits, int num_irq_regs,
+				   int size)
 {
 	const u8 *f_state = f11->data.f_state;
 	u8 finger_state;
 	u8 i;
+	int abs_fingers;
+	int rel_fingers;
+	int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
 
 	int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
 				  num_irq_regs * 8);
 	int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
 				  num_irq_regs * 8);
 
-	for (i = 0; i < sensor->nbr_fingers; i++) {
-		/* Possible of having 4 fingers per f_statet register */
+	if (abs_bits) {
+		if (abs_size > size)
+			abs_fingers = size / RMI_F11_ABS_BYTES;
+		else
+			abs_fingers = sensor->nbr_fingers;
+
+		for (i = 0; i < abs_fingers; i++) {
+			/* Possible of having 4 fingers per f_state register */
 			finger_state = rmi_f11_parse_finger_state(f_state, i);
 			if (finger_state == F11_RESERVED) {
 				pr_err("Invalid finger state[%d]: 0x%02x", i,
@@ -591,11 +601,18 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 				continue;
 			}
 
-		if (abs_bits)
 			rmi_f11_abs_pos_process(f11, sensor, &sensor->objs[i],
 							finger_state, i);
+		}
+	}
+
+	if (rel_bits) {
+		if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
+			rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
+		else
+			rel_fingers = sensor->nbr_fingers;
 
-		if (rel_bits)
+		for (i = 0; i < rel_fingers; i++)
 			rmi_f11_rel_pos_report(f11, i);
 	}
 
@@ -611,7 +628,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
 					      sensor->nbr_fingers,
 					      sensor->dmax);
 
-		for (i = 0; i < sensor->nbr_fingers; i++) {
+		for (i = 0; i < abs_fingers; i++) {
 			finger_state = rmi_f11_parse_finger_state(f_state, i);
 			if (finger_state == F11_RESERVED)
 				/* no need to send twice the error */
@@ -1062,8 +1079,8 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 		rc = rmi_2d_sensor_of_probe(&fn->dev, &f11->sensor_pdata);
 		if (rc)
 			return rc;
-	} else if (pdata->sensor_pdata) {
-		f11->sensor_pdata = *pdata->sensor_pdata;
+	} else {
+		f11->sensor_pdata = pdata->sensor_pdata;
 	}
 
 	f11->rezero_wait_ms = f11->sensor_pdata.rezero_wait;
@@ -1124,6 +1141,8 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 	sensor->topbuttonpad = f11->sensor_pdata.topbuttonpad;
 	sensor->kernel_tracking = f11->sensor_pdata.kernel_tracking;
 	sensor->dmax = f11->sensor_pdata.dmax;
+	sensor->dribble = f11->sensor_pdata.dribble;
+	sensor->palm_detect = f11->sensor_pdata.palm_detect;
 
 	if (f11->sens_query.has_physical_props) {
 		sensor->x_mm = f11->sens_query.x_sensor_size_mm;
@@ -1191,11 +1210,33 @@ static int rmi_f11_initialize(struct rmi_function *fn)
 		ctrl->ctrl0_11[RMI_F11_DELTA_Y_THRESHOLD] =
 			sensor->axis_align.delta_y_threshold;
 
-	if (f11->sens_query.has_dribble)
-		ctrl->ctrl0_11[0] = ctrl->ctrl0_11[0] & ~BIT(6);
+	if (f11->sens_query.has_dribble) {
+		switch (sensor->dribble) {
+		case RMI_REG_STATE_OFF:
+			ctrl->ctrl0_11[0] &= ~BIT(6);
+			break;
+		case RMI_REG_STATE_ON:
+			ctrl->ctrl0_11[0] |= BIT(6);
+			break;
+		case RMI_REG_STATE_DEFAULT:
+		default:
+			break;
+		}
+	}
 
-	if (f11->sens_query.has_palm_det)
-		ctrl->ctrl0_11[11] = ctrl->ctrl0_11[11] & ~BIT(0);
+	if (f11->sens_query.has_palm_det) {
+		switch (sensor->palm_detect) {
+		case RMI_REG_STATE_OFF:
+			ctrl->ctrl0_11[11] &= ~BIT(0);
+			break;
+		case RMI_REG_STATE_ON:
+			ctrl->ctrl0_11[11] |= BIT(0);
+			break;
+		case RMI_REG_STATE_DEFAULT:
+		default:
+			break;
+		}
+	}
 
 	rc = f11_write_control_regs(fn, &f11->sens_query,
 			   &f11->dev_controls, fn->fd.query_base_addr);
@@ -1241,12 +1282,21 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
 	struct f11_data *f11 = dev_get_drvdata(&fn->dev);
 	u16 data_base_addr = fn->fd.data_base_addr;
 	int error;
+	int valid_bytes = f11->sensor.pkt_size;
 
-	if (rmi_dev->xport->attn_data) {
-		memcpy(f11->sensor.data_pkt, rmi_dev->xport->attn_data,
-			f11->sensor.attn_size);
-		rmi_dev->xport->attn_data += f11->sensor.attn_size;
-		rmi_dev->xport->attn_size -= f11->sensor.attn_size;
+	if (drvdata->attn_data.data) {
+		/*
+		 * The valid data in the attention report is less then
+		 * expected. Only process the complete fingers.
+		 */
+		if (f11->sensor.attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
+		else
+			valid_bytes = f11->sensor.attn_size;
+		memcpy(f11->sensor.data_pkt, drvdata->attn_data.data,
+			valid_bytes);
+		drvdata->attn_data.data += f11->sensor.attn_size;
+		drvdata->attn_data.size -= f11->sensor.attn_size;
 	} else {
 		error = rmi_read_block(rmi_dev,
 				data_base_addr, f11->sensor.data_pkt,
@@ -1256,7 +1306,7 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
 	}
 
 	rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
-				drvdata->num_of_irq_regs);
+				drvdata->num_of_irq_regs, valid_bytes);
 
 	return 0;
 }

drivers/input/rmi4/rmi_f12.c

@@ -26,9 +26,12 @@ enum rmi_f12_object_type {
 	RMI_F12_OBJECT_SMALL_OBJECT		= 0x0D,
 };
 
+#define F12_DATA1_BYTES_PER_OBJ			8
+
 struct f12_data {
 	struct rmi_2d_sensor sensor;
 	struct rmi_2d_sensor_platform_data sensor_pdata;
+	bool has_dribble;
 
 	u16 data_addr;
 
@@ -68,10 +71,6 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	u8 buf[15];
 	int pitch_x = 0;
 	int pitch_y = 0;
-	int clip_x_low = 0;
-	int clip_x_high = 0;
-	int clip_y_low = 0;
-	int clip_y_high = 0;
 	int rx_receivers = 0;
 	int tx_receivers = 0;
 	int sensor_flags = 0;
@@ -124,7 +123,9 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	}
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x low: %d x high: %d y low: %d y high: %d\n",
-		__func__, clip_x_low, clip_x_high, clip_y_low, clip_y_high);
+		__func__,
+		sensor->axis_align.clip_x_low, sensor->axis_align.clip_x_high,
+		sensor->axis_align.clip_y_low, sensor->axis_align.clip_y_high);
 
 	if (rmi_register_desc_has_subpacket(item, 3)) {
 		rx_receivers = buf[offset];
@@ -146,12 +147,16 @@ static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 	return 0;
 }
 
-static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
+static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
 {
 	int i;
 	struct rmi_2d_sensor *sensor = &f12->sensor;
+	int objects = f12->data1->num_subpackets;
+
+	if ((f12->data1->num_subpackets * F12_DATA1_BYTES_PER_OBJ) > size)
+		objects = size / F12_DATA1_BYTES_PER_OBJ;
 
-	for (i = 0; i < f12->data1->num_subpackets; i++) {
+	for (i = 0; i < objects; i++) {
 		struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];
 
 		obj->type = RMI_2D_OBJECT_NONE;
@@ -182,7 +187,7 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
 
 		rmi_2d_sensor_abs_process(sensor, obj, i);
 
-		data1 += 8;
+		data1 += F12_DATA1_BYTES_PER_OBJ;
 	}
 
 	if (sensor->kernel_tracking)
@@ -192,7 +197,7 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
 				      sensor->nbr_fingers,
 				      sensor->dmax);
 
-	for (i = 0; i < sensor->nbr_fingers; i++)
+	for (i = 0; i < objects; i++)
 		rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 }
 
@@ -201,14 +206,20 @@ static int rmi_f12_attention(struct rmi_function *fn,
 {
 	int retval;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
 	struct rmi_2d_sensor *sensor = &f12->sensor;
-
-	if (rmi_dev->xport->attn_data) {
-		memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
-			sensor->attn_size);
-		rmi_dev->xport->attn_data += sensor->attn_size;
-		rmi_dev->xport->attn_size -= sensor->attn_size;
+	int valid_bytes = sensor->pkt_size;
+
+	if (drvdata->attn_data.data) {
+		if (sensor->attn_size > drvdata->attn_data.size)
+			valid_bytes = drvdata->attn_data.size;
+		else
+			valid_bytes = sensor->attn_size;
+		memcpy(sensor->data_pkt, drvdata->attn_data.data,
+			valid_bytes);
+		drvdata->attn_data.data += sensor->attn_size;
+		drvdata->attn_data.size -= sensor->attn_size;
 	} else {
 		retval = rmi_read_block(rmi_dev, f12->data_addr,
 					sensor->data_pkt, sensor->pkt_size);
@@ -221,19 +232,83 @@ static int rmi_f12_attention(struct rmi_function *fn,
 
 	if (f12->data1)
 		rmi_f12_process_objects(f12,
-			&sensor->data_pkt[f12->data1_offset]);
+			&sensor->data_pkt[f12->data1_offset], valid_bytes);
 
 	input_mt_sync_frame(sensor->input);
 
 	return 0;
 }
 
+static int rmi_f12_write_control_regs(struct rmi_function *fn)
+{
+	int ret;
+	const struct rmi_register_desc_item *item;
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
+	int control_size;
+	char buf[3];
+	u16 control_offset = 0;
+	u8 subpacket_offset = 0;
+
+	if (f12->has_dribble
+	    && (f12->sensor.dribble != RMI_REG_STATE_DEFAULT)) {
+		item = rmi_get_register_desc_item(&f12->control_reg_desc, 20);
+		if (item) {
+			control_offset = rmi_register_desc_calc_reg_offset(
+						&f12->control_reg_desc, 20);
+
+			/*
+			 * The byte containing the EnableDribble bit will be
+			 * in either byte 0 or byte 2 of control 20. Depending
+			 * on the existence of subpacket 0. If control 20 is
+			 * larger then 3 bytes, just read the first 3.
+			 */
+			control_size = min(item->reg_size, 3UL);
+
+			ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr
+					+ control_offset, buf, control_size);
+			if (ret)
+				return ret;
+
+			if (rmi_register_desc_has_subpacket(item, 0))
+				subpacket_offset += 1;
+
+			switch (f12->sensor.dribble) {
+			case RMI_REG_STATE_OFF:
+				buf[subpacket_offset] &= ~BIT(2);
+				break;
+			case RMI_REG_STATE_ON:
+				buf[subpacket_offset] |= BIT(2);
+				break;
+			case RMI_REG_STATE_DEFAULT:
+			default:
+				break;
+			}
+
+			ret = rmi_write_block(rmi_dev,
+				fn->fd.control_base_addr + control_offset,
+				buf, control_size);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+
+}
+
 static int rmi_f12_config(struct rmi_function *fn)
 {
 	struct rmi_driver *drv = fn->rmi_dev->driver;
+	int ret;
 
 	drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);
 
+	ret = rmi_f12_write_control_regs(fn);
+	if (ret)
+		dev_warn(&fn->dev,
+			"Failed to write F12 control registers: %d\n", ret);
+
 	return 0;
 }
 
@@ -247,7 +322,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	const struct rmi_register_desc_item *item;
 	struct rmi_2d_sensor *sensor;
 	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
-	struct rmi_transport_dev *xport = rmi_dev->xport;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	u16 data_offset = 0;
 
 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);
@@ -260,7 +335,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 	++query_addr;
 
-	if (!(buf & 0x1)) {
+	if (!(buf & BIT(0))) {
 		dev_err(&fn->dev,
 			"Behavior of F12 without register descriptors is undefined.\n");
 		return -ENODEV;
@@ -270,12 +345,14 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	if (!f12)
 		return -ENOMEM;
 
+	f12->has_dribble = !!(buf & BIT(3));
+
 	if (fn->dev.of_node) {
 		ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
 		if (ret)
 			return ret;
-	} else if (pdata->sensor_pdata) {
-		f12->sensor_pdata = *pdata->sensor_pdata;
+	} else {
+		f12->sensor_pdata = pdata->sensor_pdata;
 	}
 
 	ret = rmi_read_register_desc(rmi_dev, query_addr,
@@ -318,6 +395,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 
 	sensor->x_mm = f12->sensor_pdata.x_mm;
 	sensor->y_mm = f12->sensor_pdata.y_mm;
+	sensor->dribble = f12->sensor_pdata.dribble;
 
 	if (sensor->sensor_type == rmi_sensor_default)
 		sensor->sensor_type =
@@ -343,7 +421,7 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	 * HID attention reports.
 	 */
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
@@ -357,15 +435,15 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
@@ -377,22 +455,22 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data6 = item;
 		f12->data6_offset = data_offset;
 		data_offset += item->reg_size;
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data9 = item;
 		f12->data9_offset = data_offset;
 		data_offset += item->reg_size;
@@ -401,27 +479,27 @@ static int rmi_f12_probe(struct rmi_function *fn)
 	}
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
-	if (item && !xport->attn_data)
+	if (item && !drvdata->attn_data.data)
 		data_offset += item->reg_size;
 
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
-	if (item && !xport->attn_data) {
+	if (item && !drvdata->attn_data.data) {
 		f12->data15 = item;
 		f12->data15_offset = data_offset;
 		data_offset += item->reg_size;

drivers/input/rmi4/rmi_f30.c

@@ -99,6 +99,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 {
 	struct f30_data *f30 = dev_get_drvdata(&fn->dev);
 	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
 	int retval;
 	int gpiled = 0;
 	int value = 0;
@@ -109,11 +110,15 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
 		return 0;
 
 	/* Read the gpi led data. */
-	if (rmi_dev->xport->attn_data) {
-		memcpy(f30->data_regs, rmi_dev->xport->attn_data,
+	if (drvdata->attn_data.data) {
+		if (drvdata->attn_data.size < f30->register_count) {
+			dev_warn(&fn->dev, "F30 interrupted, but data is missing\n");
+			return 0;
+		}
+		memcpy(f30->data_regs, drvdata->attn_data.data,
 			f30->register_count);
-		rmi_dev->xport->attn_data += f30->register_count;
-		rmi_dev->xport->attn_size -= f30->register_count;
+		drvdata->attn_data.data += f30->register_count;
+		drvdata->attn_data.size -= f30->register_count;
 	} else {
 		retval = rmi_read_block(rmi_dev, fn->fd.data_base_addr,
 			f30->data_regs, f30->register_count);
@@ -192,7 +197,7 @@ static int rmi_f30_config(struct rmi_function *fn)
 				rmi_get_platform_data(fn->rmi_dev);
 	int error;
 
-	if (pdata->f30_data && pdata->f30_data->disable) {
+	if (pdata->f30_data.disable) {
 		drv->clear_irq_bits(fn->rmi_dev, fn->irq_mask);
 	} else {
 		/* Write Control Register values back to device */
@@ -351,7 +356,7 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
 	f30->gpioled_key_map = (u16 *)map_memory;
 
 	pdata = rmi_get_platform_data(rmi_dev);
-	if (pdata && f30->has_gpio) {
+	if (f30->has_gpio) {
 		button = BTN_LEFT;
 		for (i = 0; i < f30->gpioled_count; i++) {
 			if (rmi_f30_is_valid_button(i, f30->ctrl)) {
@@ -362,8 +367,7 @@ static inline int rmi_f30_initialize(struct rmi_function *fn)
 				 * f30->has_mech_mouse_btns, but I am
 				 * not sure, so use only the pdata info
 				 */
-				if (pdata->f30_data &&
-				    pdata->f30_data->buttonpad)
+				if (pdata->f30_data.buttonpad)
 					break;
 			}
 		}
@@ -378,7 +382,7 @@ static int rmi_f30_probe(struct rmi_function *fn)
 	const struct rmi_device_platform_data *pdata =
 				rmi_get_platform_data(fn->rmi_dev);
 
-	if (pdata->f30_data && pdata->f30_data->disable)
+	if (pdata->f30_data.disable)
 		return 0;
 
 	rc = rmi_f30_initialize(fn);

drivers/input/rmi4/rmi_f34.h

+/*
+ * Copyright (c) 2007-2016, Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_F34_H
+#define _RMI_F34_H
+
+/* F34 image file offsets. */
+#define F34_FW_IMAGE_OFFSET	0x100
+
+/* F34 register offsets. */
+#define F34_BLOCK_DATA_OFFSET	2
+
+/* F34 commands */
+#define F34_WRITE_FW_BLOCK	0x2
+#define F34_ERASE_ALL		0x3
+#define F34_READ_CONFIG_BLOCK	0x5
+#define F34_WRITE_CONFIG_BLOCK	0x6
+#define F34_ERASE_CONFIG	0x7
+#define F34_ENABLE_FLASH_PROG	0xf
+
+#define F34_STATUS_IN_PROGRESS	0xff
+#define F34_STATUS_IDLE		0x80
+
+#define F34_IDLE_WAIT_MS	500
+#define F34_ENABLE_WAIT_MS	300
+#define F34_ERASE_WAIT_MS	5000
+
+#define F34_BOOTLOADER_ID_LEN	2
+
+/* F34 V7 defines */
+#define V7_FLASH_STATUS_OFFSET		0
+#define V7_PARTITION_ID_OFFSET		1
+#define V7_BLOCK_NUMBER_OFFSET		2
+#define V7_TRANSFER_LENGTH_OFFSET	3
+#define V7_COMMAND_OFFSET		4
+#define V7_PAYLOAD_OFFSET		5
+#define V7_BOOTLOADER_ID_OFFSET		1
+
+#define IMAGE_HEADER_VERSION_10		0x10
+
+#define CONFIG_ID_SIZE			32
+#define PRODUCT_ID_SIZE			10
+
+#define ENABLE_WAIT_MS			(1 * 1000)
+#define WRITE_WAIT_MS			(3 * 1000)
+
+#define MIN_SLEEP_TIME_US		50
+#define MAX_SLEEP_TIME_US		100
+
+#define HAS_BSR				BIT(5)
+#define HAS_CONFIG_ID			BIT(3)
+#define HAS_GUEST_CODE			BIT(6)
+#define HAS_DISP_CFG			BIT(5)
+
+/* F34 V7 commands */
+#define CMD_V7_IDLE			0
+#define CMD_V7_ENTER_BL			1
+#define CMD_V7_READ			2
+#define CMD_V7_WRITE			3
+#define CMD_V7_ERASE			4
+#define CMD_V7_ERASE_AP			5
+#define CMD_V7_SENSOR_ID		6
+
+#define v7_CMD_IDLE			0
+#define v7_CMD_WRITE_FW			1
+#define v7_CMD_WRITE_CONFIG		2
+#define v7_CMD_WRITE_LOCKDOWN		3
+#define v7_CMD_WRITE_GUEST_CODE		4
+#define v7_CMD_READ_CONFIG		5
+#define v7_CMD_ERASE_ALL		6
+#define v7_CMD_ERASE_UI_FIRMWARE	7
+#define v7_CMD_ERASE_UI_CONFIG		8
+#define v7_CMD_ERASE_BL_CONFIG		9
+#define v7_CMD_ERASE_DISP_CONFIG	10
+#define v7_CMD_ERASE_FLASH_CONFIG	11
+#define v7_CMD_ERASE_GUEST_CODE		12
+#define v7_CMD_ENABLE_FLASH_PROG	13
+
+#define v7_UI_CONFIG_AREA		0
+#define v7_PM_CONFIG_AREA		1
+#define v7_BL_CONFIG_AREA		2
+#define v7_DP_CONFIG_AREA		3
+#define v7_FLASH_CONFIG_AREA		4
+
+/* F34 V7 partition IDs */
+#define BOOTLOADER_PARTITION		1
+#define DEVICE_CONFIG_PARTITION		2
+#define FLASH_CONFIG_PARTITION		3
+#define MANUFACTURING_BLOCK_PARTITION	4
+#define GUEST_SERIALIZATION_PARTITION	5
+#define GLOBAL_PARAMETERS_PARTITION	6
+#define CORE_CODE_PARTITION		7
+#define CORE_CONFIG_PARTITION		8
+#define GUEST_CODE_PARTITION		9
+#define DISPLAY_CONFIG_PARTITION	10
+
+/* F34 V7 container IDs */
+#define TOP_LEVEL_CONTAINER			0
+#define UI_CONTAINER				1
+#define UI_CONFIG_CONTAINER			2
+#define BL_CONTAINER				3
+#define BL_IMAGE_CONTAINER			4
+#define BL_CONFIG_CONTAINER			5
+#define BL_LOCKDOWN_INFO_CONTAINER		6
+#define PERMANENT_CONFIG_CONTAINER		7
+#define GUEST_CODE_CONTAINER			8
+#define BL_PROTOCOL_DESCRIPTOR_CONTAINER	9
+#define UI_PROTOCOL_DESCRIPTOR_CONTAINER	10
+#define RMI_SELF_DISCOVERY_CONTAINER		11
+#define RMI_PAGE_CONTENT_CONTAINER		12
+#define GENERAL_INFORMATION_CONTAINER		13
+#define DEVICE_CONFIG_CONTAINER			14
+#define FLASH_CONFIG_CONTAINER			15
+#define GUEST_SERIALIZATION_CONTAINER		16
+#define GLOBAL_PARAMETERS_CONTAINER		17
+#define CORE_CODE_CONTAINER			18
+#define CORE_CONFIG_CONTAINER			19
+#define DISPLAY_CONFIG_CONTAINER		20
+
+struct f34v7_query_1_7 {
+	u8 bl_minor_revision;			/* query 1 */
+	u8 bl_major_revision;
+	__le32 bl_fw_id;			/* query 2 */
+	u8 minimum_write_size;			/* query 3 */
+	__le16 block_size;
+	__le16 flash_page_size;
+	__le16 adjustable_partition_area_size;	/* query 4 */
+	__le16 flash_config_length;		/* query 5 */
+	__le16 payload_length;			/* query 6 */
+	u8 partition_support[4];		/* query 7 */
+} __packed;
+
+struct f34v7_data_1_5 {
+	u8 partition_id;
+	__le16 block_offset;
+	__le16 transfer_length;
+	u8 command;
+	u8 payload[2];
+} __packed;
+
+struct block_data {
+	const void *data;
+	int size;
+};
+
+struct partition_table {
+	u8 partition_id;
+	u8 byte_1_reserved;
+	__le16 partition_length;
+	__le16 start_physical_address;
+	__le16 partition_properties;
+} __packed;
+
+struct physical_address {
+	u16 ui_firmware;
+	u16 ui_config;
+	u16 dp_config;
+	u16 guest_code;
+};
+
+struct container_descriptor {
+	__le32 content_checksum;
+	__le16 container_id;
+	u8 minor_version;
+	u8 major_version;
+	u8 reserved_08;
+	u8 reserved_09;
+	u8 reserved_0a;
+	u8 reserved_0b;
+	u8 container_option_flags[4];
+	__le32 content_options_length;
+	__le32 content_options_address;
+	__le32 content_length;
+	__le32 content_address;
+} __packed;
+
+struct block_count {
+	u16 ui_firmware;
+	u16 ui_config;
+	u16 dp_config;
+	u16 fl_config;
+	u16 pm_config;
+	u16 bl_config;
+	u16 lockdown;
+	u16 guest_code;
+};
+
+struct image_header_10 {
+	__le32 checksum;
+	u8 reserved_04;
+	u8 reserved_05;
+	u8 minor_header_version;
+	u8 major_header_version;
+	u8 reserved_08;
+	u8 reserved_09;
+	u8 reserved_0a;
+	u8 reserved_0b;
+	__le32 top_level_container_start_addr;
+};
+
+struct image_metadata {
+	bool contains_firmware_id;
+	bool contains_bootloader;
+	bool contains_display_cfg;
+	bool contains_guest_code;
+	bool contains_flash_config;
+	unsigned int firmware_id;
+	unsigned int checksum;
+	unsigned int bootloader_size;
+	unsigned int display_cfg_offset;
+	unsigned char bl_version;
+	unsigned char product_id[PRODUCT_ID_SIZE + 1];
+	unsigned char cstmr_product_id[PRODUCT_ID_SIZE + 1];
+	struct block_data bootloader;
+	struct block_data ui_firmware;
+	struct block_data ui_config;
+	struct block_data dp_config;
+	struct block_data fl_config;
+	struct block_data bl_config;
+	struct block_data guest_code;
+	struct block_data lockdown;
+	struct block_count blkcount;
+	struct physical_address phyaddr;
+};
+
+struct register_offset {
+	u8 properties;
+	u8 properties_2;
+	u8 block_size;
+	u8 block_count;
+	u8 gc_block_count;
+	u8 flash_status;
+	u8 partition_id;
+	u8 block_number;
+	u8 transfer_length;
+	u8 flash_cmd;
+	u8 payload;
+};
+
+struct rmi_f34_firmware {
+	__le32 checksum;
+	u8 pad1[3];
+	u8 bootloader_version;
+	__le32 image_size;
+	__le32 config_size;
+	u8 product_id[10];
+	u8 product_info[2];
+	u8 pad2[228];
+	u8 data[];
+};
+
+struct f34v5_data {
+	u16 block_size;
+	u16 fw_blocks;
+	u16 config_blocks;
+	u16 ctrl_address;
+	u8 status;
+
+	struct completion cmd_done;
+	struct mutex flash_mutex;
+};
+
+struct f34v7_data {
+	bool has_display_cfg;
+	bool has_guest_code;
+	bool force_update;
+	bool in_bl_mode;
+	u8 *read_config_buf;
+	size_t read_config_buf_size;
+	u8 command;
+	u8 flash_status;
+	u16 block_size;
+	u16 config_block_count;
+	u16 config_size;
+	u16 config_area;
+	u16 flash_config_length;
+	u16 payload_length;
+	u8 partitions;
+	u16 partition_table_bytes;
+	bool new_partition_table;
+
+	struct register_offset off;
+	struct block_count blkcount;
+	struct physical_address phyaddr;
+	struct image_metadata img;
+
+	const void *config_data;
+	const void *image;
+};
+
+struct f34_data {
+	struct rmi_function *fn;
+
+	u8 bl_version;
+	unsigned char bootloader_id[5];
+	unsigned char configuration_id[CONFIG_ID_SIZE*2 + 1];
+
+	union {
+		struct f34v5_data v5;
+		struct f34v7_data v7;
+	};
+};
+
+int rmi_f34v7_start_reflash(struct f34_data *f34, const struct firmware *fw);
+int rmi_f34v7_do_reflash(struct f34_data *f34, const struct firmware *fw);
+int rmi_f34v7_probe(struct f34_data *f34);
+
+#endif /* _RMI_F34_H */

drivers/input/rmi4/rmi_f54.c

@@ -200,7 +200,7 @@ static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
 
 	error = rmi_write(rmi_dev, fn->fd.command_base_addr, F54_GET_REPORT);
 	if (error < 0)
-		return error;
+		goto unlock;
 
 	init_completion(&f54->cmd_done);
 
@@ -209,15 +209,18 @@ static int rmi_f54_request_report(struct rmi_function *fn, u8 report_type)
 
 	queue_delayed_work(f54->workqueue, &f54->work, 0);
 
+unlock:
 	mutex_unlock(&f54->data_mutex);
 
-	return 0;
+	return error;
 }
 
 static size_t rmi_f54_get_report_size(struct f54_data *f54)
 {
-	u8 rx = f54->num_rx_electrodes ? : f54->num_rx_electrodes;
-	u8 tx = f54->num_tx_electrodes ? : f54->num_tx_electrodes;
+	struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+	u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
 	size_t size;
 
 	switch (rmi_f54_get_reptype(f54, f54->input)) {
@@ -401,6 +404,10 @@ static int rmi_f54_vidioc_enum_input(struct file *file, void *priv,
 
 static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
 {
+	struct rmi_device *rmi_dev = f54->fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	u8 rx = drv_data->num_rx_electrodes ? : f54->num_rx_electrodes;
+	u8 tx = drv_data->num_tx_electrodes ? : f54->num_tx_electrodes;
 	struct v4l2_pix_format *f = &f54->format;
 	enum rmi_f54_report_type reptype;
 	int ret;
@@ -415,8 +422,8 @@ static int rmi_f54_set_input(struct f54_data *f54, unsigned int i)
 
 	f54->input = i;
 
-	f->width = f54->num_rx_electrodes;
-	f->height = f54->num_tx_electrodes;
+	f->width = rx;
+	f->height = tx;
 	f->field = V4L2_FIELD_NONE;
 	f->colorspace = V4L2_COLORSPACE_RAW;
 	f->bytesperline = f->width * sizeof(u16);

drivers/input/rmi4/rmi_f55.c

+/*
+ * Copyright (c) 2012-2015 Synaptics Incorporated
+ * Copyright (C) 2016 Zodiac Inflight Innovations
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include "rmi_driver.h"
+
+#define F55_NAME		"rmi4_f55"
+
+/* F55 data offsets */
+#define F55_NUM_RX_OFFSET	0
+#define F55_NUM_TX_OFFSET	1
+#define F55_PHYS_CHAR_OFFSET	2
+
+/* Only read required query registers */
+#define F55_QUERY_LEN		3
+
+/* F55 capabilities */
+#define F55_CAP_SENSOR_ASSIGN	BIT(0)
+
+struct f55_data {
+	struct rmi_function *fn;
+
+	u8 qry[F55_QUERY_LEN];
+	u8 num_rx_electrodes;
+	u8 cfg_num_rx_electrodes;
+	u8 num_tx_electrodes;
+	u8 cfg_num_tx_electrodes;
+};
+
+static int rmi_f55_detect(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *drv_data = dev_get_drvdata(&rmi_dev->dev);
+	struct f55_data *f55;
+	int error;
+
+	f55 = dev_get_drvdata(&fn->dev);
+
+	error = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr,
+			       &f55->qry, sizeof(f55->qry));
+	if (error) {
+		dev_err(&fn->dev, "%s: Failed to query F55 properties\n",
+			__func__);
+		return error;
+	}
+
+	f55->num_rx_electrodes = f55->qry[F55_NUM_RX_OFFSET];
+	f55->num_tx_electrodes = f55->qry[F55_NUM_TX_OFFSET];
+
+	f55->cfg_num_rx_electrodes = f55->num_rx_electrodes;
+	f55->cfg_num_tx_electrodes = f55->num_rx_electrodes;
+
+	drv_data->num_rx_electrodes = f55->cfg_num_rx_electrodes;
+	drv_data->num_tx_electrodes = f55->cfg_num_rx_electrodes;
+
+	if (f55->qry[F55_PHYS_CHAR_OFFSET] & F55_CAP_SENSOR_ASSIGN) {
+		int i, total;
+		u8 buf[256];
+
+		/*
+		 * Calculate the number of enabled receive and transmit
+		 * electrodes by reading F55:Ctrl1 (sensor receiver assignment)
+		 * and F55:Ctrl2 (sensor transmitter assignment). The number of
+		 * enabled electrodes is the sum of all field entries with a
+		 * value other than 0xff.
+		 */
+		error = rmi_read_block(fn->rmi_dev,
+				       fn->fd.control_base_addr + 1,
+				       buf, f55->num_rx_electrodes);
+		if (!error) {
+			total = 0;
+			for (i = 0; i < f55->num_rx_electrodes; i++) {
+				if (buf[i] != 0xff)
+					total++;
+			}
+			f55->cfg_num_rx_electrodes = total;
+			drv_data->num_rx_electrodes = total;
+		}
+
+		error = rmi_read_block(fn->rmi_dev,
+				       fn->fd.control_base_addr + 2,
+				       buf, f55->num_tx_electrodes);
+		if (!error) {
+			total = 0;
+			for (i = 0; i < f55->num_tx_electrodes; i++) {
+				if (buf[i] != 0xff)
+					total++;
+			}
+			f55->cfg_num_tx_electrodes = total;
+			drv_data->num_tx_electrodes = total;
+		}
+	}
+
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_rx_electrodes: %d (raw %d)\n",
+		f55->cfg_num_rx_electrodes, f55->num_rx_electrodes);
+	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "F55 num_tx_electrodes: %d (raw %d)\n",
+		f55->cfg_num_tx_electrodes, f55->num_tx_electrodes);
+
+	return 0;
+}
+
+static int rmi_f55_probe(struct rmi_function *fn)
+{
+	struct f55_data *f55;
+
+	f55 = devm_kzalloc(&fn->dev, sizeof(struct f55_data), GFP_KERNEL);
+	if (!f55)
+		return -ENOMEM;
+
+	f55->fn = fn;
+	dev_set_drvdata(&fn->dev, f55);
+
+	return rmi_f55_detect(fn);
+}
+
+struct rmi_function_handler rmi_f55_handler = {
+	.driver = {
+		.name = F55_NAME,
+	},
+	.func = 0x55,
+	.probe = rmi_f55_probe,
+};

drivers/input/rmi4/rmi_i2c.c

@@ -9,7 +9,6 @@
 
 #include <linux/i2c.h>
 #include <linux/rmi.h>
-#include <linux/irq.h>
 #include <linux/of.h>
 #include <linux/delay.h>
 #include <linux/regulator/consumer.h>
@@ -35,8 +34,6 @@ struct rmi_i2c_xport {
 	struct mutex page_mutex;
 	int page;
 
-	int irq;
-
 	u8 *tx_buf;
 	size_t tx_buf_size;
 
@@ -177,42 +174,6 @@ static const struct rmi_transport_ops rmi_i2c_ops = {
 	.read_block	= rmi_i2c_read_block,
 };
 
-static irqreturn_t rmi_i2c_irq(int irq, void *dev_id)
-{
-	struct rmi_i2c_xport *rmi_i2c = dev_id;
-	struct rmi_device *rmi_dev = rmi_i2c->xport.rmi_dev;
-	int ret;
-
-	ret = rmi_process_interrupt_requests(rmi_dev);
-	if (ret)
-		rmi_dbg(RMI_DEBUG_XPORT, &rmi_dev->dev,
-			"Failed to process interrupt request: %d\n", ret);
-
-	return IRQ_HANDLED;
-}
-
-static int rmi_i2c_init_irq(struct i2c_client *client)
-{
-	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
-	int irq_flags = irqd_get_trigger_type(irq_get_irq_data(rmi_i2c->irq));
-	int ret;
-
-	if (!irq_flags)
-		irq_flags = IRQF_TRIGGER_LOW;
-
-	ret = devm_request_threaded_irq(&client->dev, rmi_i2c->irq, NULL,
-			rmi_i2c_irq, irq_flags | IRQF_ONESHOT, client->name,
-			rmi_i2c);
-	if (ret < 0) {
-		dev_warn(&client->dev, "Failed to register interrupt %d\n",
-			rmi_i2c->irq);
-
-		return ret;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_OF
 static const struct of_device_id rmi_i2c_of_match[] = {
 	{ .compatible = "syna,rmi4-i2c" },
@@ -255,8 +216,7 @@ static int rmi_i2c_probe(struct i2c_client *client,
 	if (!client->dev.of_node && client_pdata)
 		*pdata = *client_pdata;
 
-	if (client->irq > 0)
-		rmi_i2c->irq = client->irq;
+	pdata->irq = client->irq;
 
 	rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Probing %s.\n",
 			dev_name(&client->dev));
@@ -321,10 +281,6 @@ static int rmi_i2c_probe(struct i2c_client *client,
 	if (retval)
 		return retval;
 
-	retval = rmi_i2c_init_irq(client);
-	if (retval < 0)
-		return retval;
-
 	dev_info(&client->dev, "registered rmi i2c driver at %#04x.\n",
 			client->addr);
 	return 0;
@@ -337,18 +293,10 @@ static int rmi_i2c_suspend(struct device *dev)
 	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_i2c->irq);
-	if (device_may_wakeup(&client->dev)) {
-		ret = enable_irq_wake(rmi_i2c->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to enable irq for wake: %d\n",
-				ret);
-	}
-
 	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
 			       rmi_i2c->supplies);
 
@@ -368,15 +316,7 @@ static int rmi_i2c_resume(struct device *dev)
 
 	msleep(rmi_i2c->startup_delay);
 
-	enable_irq(rmi_i2c->irq);
-	if (device_may_wakeup(&client->dev)) {
-		ret = disable_irq_wake(rmi_i2c->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to disable irq for wake: %d\n",
-				ret);
-	}
-
-	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
@@ -391,12 +331,10 @@ static int rmi_i2c_runtime_suspend(struct device *dev)
 	struct rmi_i2c_xport *rmi_i2c = i2c_get_clientdata(client);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_i2c->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_i2c->irq);
-
 	regulator_bulk_disable(ARRAY_SIZE(rmi_i2c->supplies),
 			       rmi_i2c->supplies);
 
@@ -416,9 +354,7 @@ static int rmi_i2c_runtime_resume(struct device *dev)
 
 	msleep(rmi_i2c->startup_delay);
 
-	enable_irq(rmi_i2c->irq);
-
-	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_i2c->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 

drivers/input/rmi4/rmi_spi.c

@@ -12,7 +12,6 @@
 #include <linux/rmi.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
-#include <linux/irq.h>
 #include <linux/of.h>
 #include "rmi_driver.h"
 
@@ -44,8 +43,6 @@ struct rmi_spi_xport {
 	struct mutex page_mutex;
 	int page;
 
-	int irq;
-
 	u8 *rx_buf;
 	u8 *tx_buf;
 	int xfer_buf_size;
@@ -326,41 +323,6 @@ static const struct rmi_transport_ops rmi_spi_ops = {
 	.read_block	= rmi_spi_read_block,
 };
 
-static irqreturn_t rmi_spi_irq(int irq, void *dev_id)
-{
-	struct rmi_spi_xport *rmi_spi = dev_id;
-	struct rmi_device *rmi_dev = rmi_spi->xport.rmi_dev;
-	int ret;
-
-	ret = rmi_process_interrupt_requests(rmi_dev);
-	if (ret)
-		rmi_dbg(RMI_DEBUG_XPORT, &rmi_dev->dev,
-			"Failed to process interrupt request: %d\n", ret);
-
-	return IRQ_HANDLED;
-}
-
-static int rmi_spi_init_irq(struct spi_device *spi)
-{
-	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
-	int irq_flags = irqd_get_trigger_type(irq_get_irq_data(rmi_spi->irq));
-	int ret;
-
-	if (!irq_flags)
-		irq_flags = IRQF_TRIGGER_LOW;
-
-	ret = devm_request_threaded_irq(&spi->dev, rmi_spi->irq, NULL,
-			rmi_spi_irq, irq_flags | IRQF_ONESHOT,
-			dev_name(&spi->dev), rmi_spi);
-	if (ret < 0) {
-		dev_warn(&spi->dev, "Failed to register interrupt %d\n",
-			rmi_spi->irq);
-		return ret;
-	}
-
-	return 0;
-}
-
 #ifdef CONFIG_OF
 static int rmi_spi_of_probe(struct spi_device *spi,
 			struct rmi_device_platform_data *pdata)
@@ -440,8 +402,7 @@ static int rmi_spi_probe(struct spi_device *spi)
 		return retval;
 	}
 
-	if (spi->irq > 0)
-		rmi_spi->irq = spi->irq;
+	pdata->irq = spi->irq;
 
 	rmi_spi->spi = spi;
 	mutex_init(&rmi_spi->page_mutex);
@@ -477,10 +438,6 @@ static int rmi_spi_probe(struct spi_device *spi)
 	if (retval)
 		return retval;
 
-	retval = rmi_spi_init_irq(spi);
-	if (retval < 0)
-		return retval;
-
 	dev_info(&spi->dev, "registered RMI SPI driver\n");
 	return 0;
 }
@@ -492,17 +449,10 @@ static int rmi_spi_suspend(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_spi->irq);
-	if (device_may_wakeup(&spi->dev)) {
-		ret = enable_irq_wake(rmi_spi->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to enable irq for wake: %d\n",
-				ret);
-	}
 	return ret;
 }
 
@@ -512,15 +462,7 @@ static int rmi_spi_resume(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	enable_irq(rmi_spi->irq);
-	if (device_may_wakeup(&spi->dev)) {
-		ret = disable_irq_wake(rmi_spi->irq);
-		if (!ret)
-			dev_warn(dev, "Failed to disable irq for wake: %d\n",
-				ret);
-	}
-
-	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, true);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
@@ -535,12 +477,10 @@ static int rmi_spi_runtime_suspend(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_suspend(rmi_spi->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 
-	disable_irq(rmi_spi->irq);
-
 	return 0;
 }
 
@@ -550,9 +490,7 @@ static int rmi_spi_runtime_resume(struct device *dev)
 	struct rmi_spi_xport *rmi_spi = spi_get_drvdata(spi);
 	int ret;
 
-	enable_irq(rmi_spi->irq);
-
-	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev);
+	ret = rmi_driver_resume(rmi_spi->xport.rmi_dev, false);
 	if (ret)
 		dev_warn(dev, "Failed to resume device: %d\n", ret);
 

drivers/input/serio/i8042-x86ia64io.h

@@ -517,79 +517,7 @@ static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
-		},
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
+			DMI_MATCH(DMI_CHASSIS_TYPE, "10"), /* Notebook */
 		},
 	},
 	{ }
@@ -1131,10 +1059,10 @@ static int __init i8042_pnp_init(void)
 	return 0;
 }
 
-#else
+#else  /* !CONFIG_PNP */
 static inline int i8042_pnp_init(void) { return 0; }
 static inline void i8042_pnp_exit(void) { }
-#endif
+#endif /* CONFIG_PNP */
 
 static int __init i8042_platform_init(void)
 {

drivers/input/serio/i8042.c

@@ -387,7 +387,7 @@ static int i8042_aux_write(struct serio *serio, unsigned char c)
 
 
 /*
- * i8042_aux_close attempts to clear AUX or KBD port state by disabling
+ * i8042_port_close attempts to clear AUX or KBD port state by disabling
  * and then re-enabling it.
  */
 

drivers/input/touchscreen/fsl-imx25-tcq.c

@@ -55,6 +55,7 @@ static const struct of_device_id mx25_tcq_ids[] = {
 	{ .compatible = "fsl,imx25-tcq", },
 	{ /* Sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, mx25_tcq_ids);
 
 #define TSC_4WIRE_PRE_INDEX 0
 #define TSC_4WIRE_X_INDEX 1

drivers/input/touchscreen/imx6ul_tsc.c

@@ -21,17 +21,25 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/log2.h>
 
 /* ADC configuration registers field define */
 #define ADC_AIEN		(0x1 << 7)
 #define ADC_CONV_DISABLE	0x1F
+#define ADC_AVGE		(0x1 << 5)
 #define ADC_CAL			(0x1 << 7)
 #define ADC_CALF		0x2
 #define ADC_12BIT_MODE		(0x2 << 2)
+#define ADC_CONV_MODE_MASK	(0x3 << 2)
 #define ADC_IPG_CLK		0x00
+#define ADC_INPUT_CLK_MASK	0x3
 #define ADC_CLK_DIV_8		(0x03 << 5)
+#define ADC_CLK_DIV_MASK	(0x3 << 5)
 #define ADC_SHORT_SAMPLE_MODE	(0x0 << 4)
+#define ADC_SAMPLE_MODE_MASK	(0x1 << 4)
 #define ADC_HARDWARE_TRIGGER	(0x1 << 13)
+#define ADC_AVGS_SHIFT		14
+#define ADC_AVGS_MASK		(0x3 << 14)
 #define SELECT_CHANNEL_4	0x04
 #define SELECT_CHANNEL_1	0x01
 #define DISABLE_CONVERSION_INT	(0x0 << 7)
@@ -84,8 +92,10 @@ struct imx6ul_tsc {
 	struct clk *adc_clk;
 	struct gpio_desc *xnur_gpio;
 
-	int measure_delay_time;
-	int pre_charge_time;
+	u32 measure_delay_time;
+	u32 pre_charge_time;
+	bool average_enable;
+	u32 average_select;
 
 	struct completion completion;
 };
@@ -96,17 +106,23 @@ struct imx6ul_tsc {
  */
 static int imx6ul_adc_init(struct imx6ul_tsc *tsc)
 {
-	int adc_hc = 0;
-	int adc_gc;
-	int adc_gs;
-	int adc_cfg;
-	int timeout;
+	u32 adc_hc = 0;
+	u32 adc_gc;
+	u32 adc_gs;
+	u32 adc_cfg;
+	unsigned long timeout;
 
 	reinit_completion(&tsc->completion);
 
 	adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
+	adc_cfg &= ~(ADC_CONV_MODE_MASK | ADC_INPUT_CLK_MASK);
 	adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK;
+	adc_cfg &= ~(ADC_CLK_DIV_MASK | ADC_SAMPLE_MODE_MASK);
 	adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE;
+	if (tsc->average_enable) {
+		adc_cfg &= ~ADC_AVGS_MASK;
+		adc_cfg |= (tsc->average_select) << ADC_AVGS_SHIFT;
+	}
 	adc_cfg &= ~ADC_HARDWARE_TRIGGER;
 	writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG);
 
@@ -118,6 +134,8 @@ static int imx6ul_adc_init(struct imx6ul_tsc *tsc)
 	/* start ADC calibration */
 	adc_gc = readl(tsc->adc_regs + REG_ADC_GC);
 	adc_gc |= ADC_CAL;
+	if (tsc->average_enable)
+		adc_gc |= ADC_AVGE;
 	writel(adc_gc, tsc->adc_regs + REG_ADC_GC);
 
 	timeout = wait_for_completion_timeout
@@ -148,7 +166,7 @@ static int imx6ul_adc_init(struct imx6ul_tsc *tsc)
  */
 static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc)
 {
-	int adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4;
+	u32 adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4;
 
 	adc_hc0 = DISABLE_CONVERSION_INT;
 	writel(adc_hc0, tsc->adc_regs + REG_ADC_HC0);
@@ -173,8 +191,8 @@ static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc)
  */
 static void imx6ul_tsc_set(struct imx6ul_tsc *tsc)
 {
-	int basic_setting = 0;
-	int start;
+	u32 basic_setting = 0;
+	u32 start;
 
 	basic_setting |= tsc->measure_delay_time << 8;
 	basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE;
@@ -209,8 +227,8 @@ static int imx6ul_tsc_init(struct imx6ul_tsc *tsc)
 
 static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
 {
-	int tsc_flow;
-	int adc_cfg;
+	u32 tsc_flow;
+	u32 adc_cfg;
 
 	/* TSC controller enters to idle status */
 	tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
@@ -227,8 +245,8 @@ static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
 static bool tsc_wait_detect_mode(struct imx6ul_tsc *tsc)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(2);
-	int state_machine;
-	int debug_mode2;
+	u32 state_machine;
+	u32 debug_mode2;
 
 	do {
 		if (time_after(jiffies, timeout))
@@ -246,10 +264,10 @@ static bool tsc_wait_detect_mode(struct imx6ul_tsc *tsc)
 static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
 {
 	struct imx6ul_tsc *tsc = dev_id;
-	int status;
-	int value;
-	int x, y;
-	int start;
+	u32 status;
+	u32 value;
+	u32 x, y;
+	u32 start;
 
 	status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS);
 
@@ -289,8 +307,8 @@ static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
 static irqreturn_t adc_irq_fn(int irq, void *dev_id)
 {
 	struct imx6ul_tsc *tsc = dev_id;
-	int coco;
-	int value;
+	u32 coco;
+	u32 value;
 
 	coco = readl(tsc->adc_regs + REG_ADC_HS);
 	if (coco & 0x01) {
@@ -346,6 +364,7 @@ static int imx6ul_tsc_probe(struct platform_device *pdev)
 	int err;
 	int tsc_irq;
 	int adc_irq;
+	u32 average_samples;
 
 	tsc = devm_kzalloc(&pdev->dev, sizeof(*tsc), GFP_KERNEL);
 	if (!tsc)
@@ -450,6 +469,30 @@ static int imx6ul_tsc_probe(struct platform_device *pdev)
 	if (err)
 		tsc->pre_charge_time = 0xfff;
 
+	err = of_property_read_u32(np, "touchscreen-average-samples",
+				   &average_samples);
+	if (err)
+		average_samples = 1;
+
+	switch (average_samples) {
+	case 1:
+		tsc->average_enable = false;
+		tsc->average_select = 0; /* value unused; initialize anyway */
+		break;
+	case 4:
+	case 8:
+	case 16:
+	case 32:
+		tsc->average_enable = true;
+		tsc->average_select = ilog2(average_samples) - 2;
+		break;
+	default:
+		dev_err(&pdev->dev,
+			"touchscreen-average-samples (%u) must be 1, 4, 8, 16 or 32\n",
+			average_samples);
+		return -EINVAL;
+	}
+
 	err = input_register_device(tsc->input);
 	if (err) {
 		dev_err(&pdev->dev,

drivers/input/touchscreen/melfas_mip4.c

@@ -33,7 +33,7 @@
 
 /*****************************************************************
  * Protocol
- * Version : MIP 4.0 Rev 4.6
+ * Version : MIP 4.0 Rev 5.4
  *****************************************************************/
 
 /* Address */
@@ -81,6 +81,9 @@
 #define MIP4_R1_INFO_IC_HW_CATEGORY		0x77
 #define MIP4_R1_INFO_CONTACT_THD_SCR		0x78
 #define MIP4_R1_INFO_CONTACT_THD_KEY		0x7A
+#define MIP4_R1_INFO_PID				0x7C
+#define MIP4_R1_INFO_VID				0x7E
+#define MIP4_R1_INFO_SLAVE_ADDR			0x80
 
 #define MIP4_R0_EVENT				0x02
 #define MIP4_R1_EVENT_SUPPORTED_FUNC		0x00
@@ -157,7 +160,9 @@ struct mip4_ts {
 
 	char phys[32];
 	char product_name[16];
+	u16 product_id;
 	char ic_name[4];
+	char fw_name[32];
 
 	unsigned int max_x;
 	unsigned int max_y;
@@ -264,6 +269,23 @@ static int mip4_query_device(struct mip4_ts *ts)
 		dev_dbg(&ts->client->dev, "product name: %.*s\n",
 			(int)sizeof(ts->product_name), ts->product_name);
 
+	/* Product ID */
+	cmd[0] = MIP4_R0_INFO;
+	cmd[1] = MIP4_R1_INFO_PID;
+	error = mip4_i2c_xfer(ts, cmd, sizeof(cmd), buf, 2);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			 "Failed to retrieve product id: %d\n", error);
+	} else {
+		ts->product_id = get_unaligned_le16(&buf[0]);
+		dev_dbg(&ts->client->dev, "product id: %04X\n", ts->product_id);
+	}
+
+	/* Firmware name */
+	snprintf(ts->fw_name, sizeof(ts->fw_name),
+		"melfas_mip4_%04X.fw", ts->product_id);
+	dev_dbg(&ts->client->dev, "firmware name: %s\n", ts->fw_name);
+
 	/* IC name */
 	cmd[0] = MIP4_R0_INFO;
 	cmd[1] = MIP4_R1_INFO_IC_NAME;
@@ -1269,11 +1291,11 @@ static ssize_t mip4_sysfs_fw_update(struct device *dev,
 	const struct firmware *fw;
 	int error;
 
-	error = request_firmware(&fw, MIP4_FW_NAME, dev);
+	error = request_firmware(&fw, ts->fw_name, dev);
 	if (error) {
 		dev_err(&ts->client->dev,
 			"Failed to retrieve firmware %s: %d\n",
-			MIP4_FW_NAME, error);
+			ts->fw_name, error);
 		return error;
 	}
 
@@ -1348,6 +1370,25 @@ static ssize_t mip4_sysfs_read_hw_version(struct device *dev,
 
 static DEVICE_ATTR(hw_version, S_IRUGO, mip4_sysfs_read_hw_version, NULL);
 
+static ssize_t mip4_sysfs_read_product_id(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mip4_ts *ts = i2c_get_clientdata(client);
+	size_t count;
+
+	mutex_lock(&ts->input->mutex);
+
+	count = snprintf(buf, PAGE_SIZE, "%04X\n", ts->product_id);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(product_id, S_IRUGO, mip4_sysfs_read_product_id, NULL);
+
 static ssize_t mip4_sysfs_read_ic_name(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
@@ -1371,6 +1412,7 @@ static DEVICE_ATTR(ic_name, S_IRUGO, mip4_sysfs_read_ic_name, NULL);
 static struct attribute *mip4_attrs[] = {
 	&dev_attr_fw_version.attr,
 	&dev_attr_hw_version.attr,
+	&dev_attr_product_id.attr,
 	&dev_attr_ic_name.attr,
 	&dev_attr_update_fw.attr,
 	NULL,
@@ -1435,6 +1477,7 @@ static int mip4_probe(struct i2c_client *client, const struct i2c_device_id *id)
 
 	input->id.bustype = BUS_I2C;
 	input->id.vendor = 0x13c5;
+	input->id.product = ts->product_id;
 
 	input->open = mip4_input_open;
 	input->close = mip4_input_close;
@@ -1572,6 +1615,6 @@ static struct i2c_driver mip4_driver = {
 module_i2c_driver(mip4_driver);
 
 MODULE_DESCRIPTION("MELFAS MIP4 Touchscreen");
-MODULE_VERSION("2016.09.28");
+MODULE_VERSION("2016.10.31");
 MODULE_AUTHOR("Sangwon Jee <jeesw@melfas.com>");
 MODULE_LICENSE("GPL");

drivers/input/touchscreen/raydium_i2c_ts.c

@@ -669,7 +669,7 @@ static int raydium_i2c_do_update_firmware(struct raydium_data *ts,
 
 		if (ts->boot_mode == RAYDIUM_TS_MAIN) {
 			dev_err(&client->dev,
-				"failied to jump to boot loader: %d\n",
+				"failed to jump to boot loader: %d\n",
 				error);
 			return -EIO;
 		}

include/linux/gpio_keys.h

@@ -2,7 +2,6 @@
 #define _GPIO_KEYS_H
 
 struct device;
-struct gpio_desc;
 
 /**
  * struct gpio_keys_button - configuration parameters
@@ -18,7 +17,6 @@ struct gpio_desc;
  *			disable button via sysfs
  * @value:		axis value for %EV_ABS
  * @irq:		Irq number in case of interrupt keys
- * @gpiod:		GPIO descriptor
  */
 struct gpio_keys_button {
 	unsigned int code;
@@ -31,7 +29,6 @@ struct gpio_keys_button {
 	bool can_disable;
 	int value;
 	unsigned int irq;
-	struct gpio_desc *gpiod;
 };
 
 /**
@@ -46,7 +43,7 @@ struct gpio_keys_button {
  * @name:		input device name
  */
 struct gpio_keys_platform_data {
-	struct gpio_keys_button *buttons;
+	const struct gpio_keys_button *buttons;
 	int nbuttons;
 	unsigned int poll_interval;
 	unsigned int rep:1;