Commit afb8fd3c authored by Takashi Iwai's avatar Takashi Iwai

ALSA: doc: ReSTize Procfile document

A simple conversion from a text file.

A new subidrectory, Documentation/sound/designs, was created to put
this document.  The other API design and implementation docuemnts
will be put to that directory in later commits.
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent f6d23df5
Designs and Implementations
===========================
.. toctree::
:maxdepth: 2
procfile
Proc Files of ALSA Drivers
==========================
Takashi Iwai <tiwai@suse.de>
==========================
Proc Files of ALSA Drivers
==========================
Takashi Iwai <tiwai@suse.de>
General
-------
=======
ALSA has its own proc tree, /proc/asound. Many useful information are
found in this tree. When you encounter a problem and need debugging,
check the files listed in the following sections.
Each card has its subtree cardX, where X is from 0 to 7. The
card-specific files are stored in the card* subdirectories.
card-specific files are stored in the ``card*`` subdirectories.
Global Information
------------------
==================
cards
Shows the list of currently configured ALSA drivers,
......@@ -31,15 +33,15 @@ devices
meminfo
Shows the status of allocated pages via ALSA drivers.
Appears only when CONFIG_SND_DEBUG=y.
Appears only when ``CONFIG_SND_DEBUG=y``.
hwdep
Lists the currently available hwdep devices in format of
<card>-<device>: <name>
``<card>-<device>: <name>``
pcm
Lists the currently available PCM devices in format of
<card>-<device>: <id>: <name> : <sub-streams>
``<card>-<device>: <id>: <name> : <sub-streams>``
timer
Lists the currently available timer devices
......@@ -54,23 +56,23 @@ oss/sndstat
Card Specific Files
-------------------
===================
The card-specific files are found in /proc/asound/card* directories.
The card-specific files are found in ``/proc/asound/card*`` directories.
Some drivers (e.g. cmipci) have their own proc entries for the
register dump, etc (e.g. /proc/asound/card*/cmipci shows the register
register dump, etc (e.g. ``/proc/asound/card*/cmipci`` shows the register
dump). These files would be really helpful for debugging.
When PCM devices are available on this card, you can see directories
like pcm0p or pcm1c. They hold the PCM information for each PCM
stream. The number after 'pcm' is the PCM device number from 0, and
the last 'p' or 'c' means playback or capture direction. The files in
stream. The number after ``pcm`` is the PCM device number from 0, and
the last ``p`` or ``c`` means playback or capture direction. The files in
this subtree is described later.
The status of MIDI I/O is found in midi* files. It shows the device
The status of MIDI I/O is found in ``midi*`` files. It shows the device
name and the received/transmitted bytes through the MIDI device.
When the card is equipped with AC97 codecs, there are codec97#*
When the card is equipped with AC97 codecs, there are ``codec97#*``
subdirectories (described later).
When the OSS mixer emulation is enabled (and the module is loaded),
......@@ -81,26 +83,27 @@ details.
PCM Proc Files
--------------
==============
card*/pcm*/info
``card*/pcm*/info``
The general information of this PCM device: card #, device #,
substreams, etc.
card*/pcm*/xrun_debug
This file appears when CONFIG_SND_DEBUG=y and
CONFIG_PCM_XRUN_DEBUG=y.
``card*/pcm*/xrun_debug``
This file appears when ``CONFIG_SND_DEBUG=y`` and
``CONFIG_PCM_XRUN_DEBUG=y``.
This shows the status of xrun (= buffer overrun/xrun) and
invalid PCM position debug/check of ALSA PCM middle layer.
It takes an integer value, can be changed by writing to this
file, such as
file, such as::
# echo 5 > /proc/asound/card0/pcm0p/xrun_debug
The value consists of the following bit flags:
bit 0 = Enable XRUN/jiffies debug messages
bit 1 = Show stack trace at XRUN / jiffies check
bit 2 = Enable additional jiffies check
* bit 0 = Enable XRUN/jiffies debug messages
* bit 1 = Show stack trace at XRUN / jiffies check
* bit 2 = Enable additional jiffies check
When the bit 0 is set, the driver will show the messages to
kernel log when an xrun is detected. The debug message is
......@@ -117,72 +120,74 @@ card*/pcm*/xrun_debug
buggy) hardware that doesn't give smooth pointer updates.
This feature is enabled via the bit 2.
card*/pcm*/sub*/info
``card*/pcm*/sub*/info``
The general information of this PCM sub-stream.
card*/pcm*/sub*/status
``card*/pcm*/sub*/status``
The current status of this PCM sub-stream, elapsed time,
H/W position, etc.
card*/pcm*/sub*/hw_params
``card*/pcm*/sub*/hw_params``
The hardware parameters set for this sub-stream.
card*/pcm*/sub*/sw_params
``card*/pcm*/sub*/sw_params``
The soft parameters set for this sub-stream.
card*/pcm*/sub*/prealloc
``card*/pcm*/sub*/prealloc``
The buffer pre-allocation information.
card*/pcm*/sub*/xrun_injection
``card*/pcm*/sub*/xrun_injection``
Triggers an XRUN to the running stream when any value is
written to this proc file. Used for fault injection.
This entry is write-only.
AC97 Codec Information
----------------------
======================
card*/codec97#*/ac97#?-?
``card*/codec97#*/ac97#?-?``
Shows the general information of this AC97 codec chip, such as
name, capabilities, set up.
card*/codec97#0/ac97#?-?+regs
``card*/codec97#0/ac97#?-?+regs``
Shows the AC97 register dump. Useful for debugging.
When CONFIG_SND_DEBUG is enabled, you can write to this file for
changing an AC97 register directly. Pass two hex numbers.
For example,
::
# echo 02 9f1f > /proc/asound/card0/codec97#0/ac97#0-0+regs
USB Audio Streams
-----------------
=================
card*/stream*
``card*/stream*``
Shows the assignment and the current status of each audio stream
of the given card. This information is very useful for debugging.
HD-Audio Codecs
---------------
===============
card*/codec#*
``card*/codec#*``
Shows the general codec information and the attribute of each
widget node.
card*/eld#*
``card*/eld#*``
Available for HDMI or DisplayPort interfaces.
Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink,
and describes its audio capabilities and configurations.
Some ELD fields may be modified by doing `echo name hex_value > eld#*`.
Some ELD fields may be modified by doing ``echo name hex_value > eld#*``.
Only do this if you are sure the HDMI sink provided value is wrong.
And if that makes your HDMI audio work, please report to us so that we
can fix it in future kernel releases.
Sequencer Information
---------------------
=====================
seq/drivers
Lists the currently available ALSA sequencer drivers.
......@@ -203,7 +208,7 @@ seq/oss
Help For Debugging?
-------------------
===================
When the problem is related with PCM, first try to turn on xrun_debug
mode. This will give you the kernel messages when and where xrun
......@@ -211,24 +216,23 @@ happened.
If it's really a bug, report it with the following information:
- the name of the driver/card, show in /proc/asound/cards
- the register dump, if available (e.g. card*/cmipci)
- the name of the driver/card, show in ``/proc/asound/cards``
- the register dump, if available (e.g. ``card*/cmipci``)
when it's a PCM problem,
- set-up of PCM, shown in hw_parms, sw_params, and status in the PCM
- set-up of PCM, shown in hw_parms, sw_params, and status in the PCM
sub-stream directory
when it's a mixer problem,
- AC97 proc files, codec97#*/* files
- AC97 proc files, ``codec97#*/*`` files
for USB audio/midi,
- output of lsusb -v
- stream* files in card directory
- output of ``lsusb -v``
- ``stream*`` files in card directory
The ALSA bug-tracking system is found at:
https://bugtrack.alsa-project.org/alsa-bug/
https://bugtrack.alsa-project.org/alsa-bug/
......@@ -6,6 +6,7 @@ Linux Sound Subsystem Documentation
:maxdepth: 2
kernel-api/index
designs/index
alsa-configuration
hd-audio/index
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment